3M 17206 film adhesive
Contents
1. 17206 command com CLEAN surface with isopropyl rubbing alcohol wipe gently let dry Do not use household cleaners SEPARATE strips Press fasteners together until they snap Remove one green liner Position one set of strips on back of frame press firmly Repeat Remove remaining green liners Position frame on wall IMPORTANT PRESS EACH SET FIRMLY for 30 seconds RECOMMENDED PLACEMENT Place lower set 2 8 from top 24 x 36 8 x10 16 x 20 Wait 1 hour to mount frame Press fasteners firmly together until they click If item is not level reposition Grab frame at bottom and peel off surface DO NOT pull straight toward you to remove FIRMLY press all 3 areas of each strip for 30 seconds each TIPS Wait minimum 7 days after painting to hang frames If there is paper backing on frame remove to attach fastener directly to frame To Remove A 5 STRAIGHT amp DOWN Grab bottom corners and NEVER pull strip remove frame as shown Continue stretching towards you AT LEAST 15 INCHES 38 cm until strip releases from wall LIGHTLY Bess top of strip and grab tab STRETCH SLOWLY STRAIGHT DOWN ALONG WALL IMPORTANT Failure to follow instructions carefully may cause damage SAVE INSTRUCTIONS for damage free removal or visit command com For questions ideas and special offers go to command com CAUTION DO NOT use wi2. th wallpaper May not adhere well to vinyl surfaces DO NOT use for antiques heirlooms or other valuable or irreplaceable items DO NOT hang items over beds NOTE Apply to surfaces above 50 F 10 C Adhesive could lose adhesion above 105 F 40 C The following statements only apply to products distributed in the USA Limited Warranty This 3M product will be free from defects in material and manufacture If this product is defective your exclusive remedy shall be at 3M s option replacement of the product or refund of the purchase price Limitation of Liability 3M will not be liable for any loss or damage arising from this product whether direct indirect special incidental or consequential
Download Pdf Manuals
Related Search