Omron Healthcare BP629 blood pressure unit
Contents
1. Do not apply over clothing Place the cuff over your left wrist with your left thumb facing upward Position the cuff leaving a clearance of approximately 1 2 to 1 inch between the cuff and the bottom of your palm wrist so it fits comfortably and securely around your wrist NOTE Make sure the wrist cuff does not cover the protruding part of the wrist bone on the outside of the wrist 15 APPLYING THE WRIST CUFF 5 Fold the remaining part of the wrist cuff back out of the way APPLYING THE CUFF ON THE RIGHT WRIST When taking a measurement using the right wrist position the cuff as shown in the illustration 16 TAKING A MEASUREMENT 1 Sit comfortably in a chair with your feet flat on the floor 2 Hold your arm across your chest at heart level Hold your elbow firmly to avoid body movement Sit still and do not talk or move during the measurement 3 Press the START STOP button All symbols appear on the display 17 TAKING A MEASUREMENT Nn After the monitor has detected your blood pressure Press the START STOP button to turn the monitor off The cuff starts to inflate automatically As the cuff inflates the monitor automatically determines your ideal inflation level This monitor detects your blood pressure and pulse rate during inflation The Heartbeat Symbol 4 flashes at every heartbeat Remain still and do not move until the entire measurement process is completed NOTE2. Digital Display Measurement Range Pressure 0 to 299 mmHg Pulse 40 to 180 min Accuracy Calibration Pressure 3mmHg or 2 of reading Pulse 5 of reading Inflation Automatic by electric pump Deflation Automatic pressure release valve Rapid Air Release Automatic exhaust valve Measurement Method Oscillometric method Power Source 1 5V 2 AAA batteries Battery Life Approx 300 uses with 2 new alkaline batteries Operating Temperature 50 F to 104 F 10 C to 40 C 15 to 90 RH Humidity Storage Temperature 4 F to 140 F 20 C to 60 C 10 to 95 RH Humidity Air Pressure 700 1060 hPa Main Unit Weight Approximately 4 1 8 oz 117g not including batteries Main Unit Dimensions Approx 2 3 4 1 x 2 3 4 w x 1 5 8 h 70 mm x 71 mm x 41 mm not including the wrist cuff Measurable Approximately 5 1 4 to 8 1 2 13 5 to 21 5 cm circumference of wrist Memory Up to 60 Contents Main Unit Storage Case 2 AAA Alkaline Batteries Instruction Manual and Quick Start Guide a A Type B NOTE These specifications are subject to change without notice 26 Omron Healthcare Inc 1200 Lakeside Drive Bannockburn IL 60015 www omronhealthcare com Copyright 2010 Omron Healthcare Inc Made in China 5329416 7A
3. in this instruction manual SAFETY SYMBOLS USED IN THIS INSTRUCTION MANUAL Indicates a potentially hazardous situation which if not avoided WARNING could result in death or serious injury Indicates a potentially hazardous situation which if not avoided A CAUTION may result in minor or moderate injury to the user or patient or damage to the equipment or other property OPERATING THE DEVICE A Contact your physician for specific information about your blood pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider A DO NOT adjust medication based on measurement results from this blood pressure monitor Take medication as prescribed by your physician Only a physician is qualified to diagnose and treat High Blood Pressure A The monitor is not intended to be a diagnostic device A If battery fluid should get in your eyes immediately rinse with plenty of clean water Contact a physician immediately A If you have a condition that may compromise circulation you may get an inaccurate reading with this device Consult your physician before using this device A Read all of the information in the instruction manual and any other literature in the box before operating the unit A This device is intended for use in measuring blood pressure and pulse rate in the adult population Do not use this device on infants or persons who cann
4. taken in a quiet place Position the unit at heart level throughout the measurement Remain still and do not talk during the measurement Wait 2 3 minutes between measurements The wait time allows the arteries to return to the condition prior to taking the blood pressure measurement You may need to increase the wait time depending on your individual physiological characteristics 8 Keep a record of your blood pressure and pulse readings for your physician A single measurement does not provide an accurate indication of your true blood pressure You need to take and record several readings over a period of time Try to measure your blood pressure at the same time each day for consistency ADAP uy Dn KNOW YOUR UNIT Main Unit Disol A Rpa Wrist cuff Memory MEM button START STOP button Date Time Setting B button Date Time Setting button Battery compartment Components GETTING STARTED 2 AAA Alkaline Batteries Instruction Quick Start Manual Guide UNIT DISPLAY Systolic blood pressure Diastolic blood pressure S mmHg n E Memory symbol LISI ii Average value symbol La Ac cr lar heartb bol mmHg ama rregular heartbeat symbo Da 05 9 y LSE oe Pulse display DACI x Je JE Movement error symbol nd PM aaax 2 Battery low symbol Date Time display Heartbeat symbol Flashes during measurement 5A Blood pressure level indicator Deflation sym
5. AUTION Do not subject the monitor to strong shocks such as dropping the unit on the floor Remove the batteries if the unit will not be used for three months or longer Always replace all the batteries with new ones at the same time Use the unit consistent with the instruction provided in this manual Use only authorized parts and accessories Use the unit in a manner consistent with the instructions provided in this manual A CAUTION Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit A CAUTION Changes or modification not approved by the manufacturer will void the user warranty Do not disassemble or attempt to repair the unit or components 21 ERROR INDICATORS Take another measurement and remain still until the measurement is complete Monitor could not detect pulse wave Cuff under inflated Cuff not applied Remove the monitor from your correctly wrist Read Taking a Measurement Cuff over inflated Wait 2 3 minutes Take another measurement 5 Contact Customer Service amp Movement during Keep still and take another measurement measurement Remove the monitor from your wrist Wait 2 3 minutes and then take another measurement Repeat the steps in section Applying the Wrist Cuff If this symbol continues to appear contact your doctor Replace the batteries Batteries are worn a suli Refer to Battery In
6. Contact your physician for specific information about your blood pressure Self diagnosis and treatment using measured results may be dangerous Follow the instructions of your physician or licensed healthcare provider A WARNING DO NOT adjust medication based on measurement results from this blood pressure monitor Take medication as prescribed by your physician Only a physician is qualified to diagnose and treat High Blood Pressure A WARNING The monitor is not intended to be a diagnostic device BATTERY INSTALLATION A CAUTION Use only 1 5V AAA alkaline batteries with this device 1 Press the hook on the bottom of the battery cover and lift the cover off in the direction of the arrow 2 Install 2 AAA size batteries so the positive and negative polarities match the polarities of the battery compartment as indicated 3 Set the date and time Refer to Setting the Date and Time 4 Replace the battery cover NOTE Make sure that the battery cover is securely in position 11 BATTERY INSTALLATION BATTERY REPLACEMENT xi Low Battery Indicator When the Low Battery Indicator appears on the display turn the monitor off and remove all the batteries Replace with 2 new batteries at the same time Long life alkaline batteries are recommended A WARNING If battery fluid should get in your eyes immediately rinse with plenty of clean water Contact a physician immediately NOTES Turn
7. OMRON INSTRUCTION MANUAL 3 series Automatic Wrist Blood Pressure Monitor Model BP629 ESPANOL ENGLISH TABLE OF CONTENTS Before using the Monitor IMTTORUCtion daa diri 3 Safety Information caian 4 Operating the Device Lui eee il i ii 4 Care and Maintenance siess seriya adede riscas Eesi EEn sauce nine 5 Operating Instructions Before Taking a Measurement i 6 Know Your Unit Unit DISPlAV ee ee A Display Symb lS rren fl asc ERI ENO arca ito 9 Irregular Heartbeat Symbol 9 Movement Error Symbol seirer oe nono non a so 9 Battery Installations A A ei dle ote 11 Setting the Date ad le iii atada 13 Applying the Wrist Gust aa Aa 15 Applying the Cuff on the Left Wrist eects eeeeteeeeeeneees 15 Applying the Cuff on the Right Wrist i Taking a Measurement Using the Memory Function Averaging FUNCtion ii To Display the Measurement Values To Delete All Values Stored in the Memory Care and Maintenance E RE R 21 NS FORINO RENOIR FORNO soeisasvvacostises tntsasziedesvsceestaatsseaests 22 Troubleshooting Tips uil E I 23 FGG Staternenti incl ora A E EATE 24 Limuited Watranty he ta Ad 25 SPECICALONS gt il Ran LI REr a alli 26 INTRODUCTION Thank you for purchasing the OMRON BP629 IntelliSense Automatic Wrist Blood Pressure Monitor Fill in for future re
8. To stop the inflation or measurement push the START STOP button The monitor will stop inflating start deflating and will turn off Q Intellisense and pulse rate the cuff automatically deflates Your blood pressure and pulse rate are displayed NOTE The monitor will automatically turn off after two minutes 18 USING THE MEMORY FUNCTION Every time you complete a measurement the monitor stores the blood pressure and pulse rate in the memory The monitor automatically stores up to 60 sets of measurement values blood pressure and pulse rate When 60 sets of measurement values are stored the oldest record is deleted to save the most recent values AVERAGING FUNCTION The monitor calculates the average reading based on up to the three most recent sets of measurement values taken within 10 minutes of the most recent reading NOTE If two sets of measurement values are stored in the memory for the 10 minute period the average is based on the two sets of measurement values If only one set of measurement values is stored this is displayed as the average TO DISPLAY THE MEASUREMENT VALUES 1 Press the MEM button to display the average reading based on the three most recent sets of measurement values taken within 10 minutes of the most recent reading The Average Value Symbol ji appears on the display when the average reading is shown Q Intellisense 2 Press the MEM button to display the set of measurement va
9. bol DISPLAY SYMBOLS IRREGULAR HEARTBEAT SYMBOL Q When the monitor detects an irregular rhythm two or more times during the measurement the Irregular Heartbeat Symbol CY will appear on the display with the measurement values An irregular heartbeat rhythm is defined as a Normal Heartbeat rhythm that varies by less than 25 from the Puse ff AA A A A average rhythm or 25 more than the average ee rhythm detected while the monitor is measuring Blood JL IAAL AS the systolic and diastolic blood pressure id If the irregular heartbeat symbol OY Irregular Heartbeat displays with your measurement results Short Long we recommend you consult your physician Follow the directions of your AA NAAA doctor pr good NIVALAN MOVEMENT ERROR SYMBOL Q The Movement Error Symbol Q is displayed if you move your body during the measurement Please remove the wrist cuff and wait 2 3 minutes Reapply the wrist cuff and take another measurement Pulse Internationally recognized guidelines for upper limit of normal home blood pressure readings are as follows Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg DISPLAY SYMBOLS This is a general guideline because blood pressure depends on age and morbidity A lower home blood pressure goal may be recommended for certain patients including diabetic patients pregnant women and patients with renal failure A WARNING
10. d by the above warranties Repair or replacement is our only responsibility and your only remedy under the above warranties To obtain warranty service contact Customer Service by calling 1 800 634 4350 for the address of the repair location and the return shipping and handling fee Enclose the Proof of Purchase Include a letter with your name address phone number and description of the specific problem Pack the product carefully to prevent damage in transit Because of possible loss in transit we recommend insuring the product with return receipt requested THE FOREGOING IS THE SOLE WARRANTY PROVIDED BY OMRON IN CONNECTION WITH THIS PRODUCT AND OMRON HEREBY DISCLAIMS ANY OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE IMPLIED WARRANTIES AND OTHER TERMS THAT MAY BE IMPOSED BY LAW IF ANY ARE LIMITED IN DURATION TO THE PERIOD OF THE ABOVE EXPRESS WARRANTY OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER SPECIAL INCIDENTAL CONSEQUENTAIL OR INDIRECT COSTS EXPENSES OR DAMAGES This warranty provides you with specific legal rights and you may have other rights that vary by jurisdiction Because of special local requirements some of the above limitations and exclusions may not apply to you FOR CUSTOMER SERVICE Visit our web site at www omronhealthcare com Call toll free 1 800 634 4350 25 SPECIFICATIONS Model BP629 HEM 6200 Z Display LCD
11. e the receiving antenna Increase the separation between the product and the receiver e Connect the product into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help POTENTIAL FOR RADIO TELEVISION INTERFERENCE for Canada only This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference causing equipment standard entitled Digital Apparatus ICES 003 of the Canadian Department of Communications Cet appareil num rique respecte les limites de bruits radioel ctriques applicables aux appareils num riques de Clase B prescrites dans la norme sur le materiel brouilleur Appareils Num riques ICES 003 dict e par le minister des communications Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 24 LIMITED WARRANTY Your BP629 IntelliSense Automatic Wrist Blood Pressure Monitor excluding the wrist cuff and batteries is warranted to be free from defects in materials and workmanship appearing within 2 years from the date of purchase when used in accordance with the instructions provided with the monitor The above warranties extend only to the original retail purchaser We will at our option repair or replace without charge any monitor or wrist cuff covere
12. ference DATE PURCHASED SERIAL NUMBER Staple your purchase receipt here Register your product on line at www register omron com The monitor is compact and easy to use at home at work and during travel Perfect for people who frequently monitor their own blood pressure Your new digital blood pressure monitor uses the oscillometric method of blood pressure measurement This means the monitor detects your blood s movement through your brachial artery and converts the movements into a digital reading An oscillometric monitor does not need a stethoscope so the monitor is simple to use Clinical research has proven a direct relationship between blood pressure in the wrist and blood pressure in the arm Changes in wrist blood pressure reflect changes in arm blood pressure because the arteries in the wrist and the arm are close to each other Frequently measuring the blood pressure in your wrist will provide your physician with an accurate indication of changes in your blood pressure The BP629 comes with the following components e Monitor Storage Case 2 AAA Alkaline Batteries Instruction Manual printed in English and Spanish Quick Start Guide The BP629 IntelliSense Automatic Wrist Blood Pressure Monitor is intended for home use SAVE THESE INSTRUCTIONS SAFETY INFORMATION To assure the correct use of the product basic safety measures should always be followed including the warnings and cautions listed
13. lues from the most recent to the oldest Alternating date time display 19 USING THE MEMORY FUNCTION NOTES Press the MEM button repeatedly to display the next values Press and hold the MEM button to display the values faster The date and time are alternately displayed with the measurement values 3 Press the START STOP button to turn the monitor off TO DELETE ALL VALUES STORED IN THE MEMORY You cannot partially delete values stored in the memory All values will be deleted 1 Press the START STOP button to turn the monitor on 2 While holding the MEM button press the START STOP button down for more than 5 seconds until the display appears as it does in the following illustration G Intellisense 3 Press the START STOP button to turn the monitor off NOTE The monitor will automatically turn off after two minutes 20 CARE AND MAINTENANCE To keep your digital blood pressure monitor in the best condition and protect the unit from damage follow the directions listed below Do not forcefully bend the cuff Do not fold tightly Clean the monitor with a soft dry cloth Do not use any abrasive or volatile cleaners Do not attempt to clean the cuff A CAUTION Do not submerge the device or any of the components in water Do not subject the monitor to extreme hot or cold temperatures humidity or direct sunlight A CAUTION Store the device and the components in a clean safe location A C
14. ot express their intentions A Operate the device only as intended Do not use the device for any other purpose A Dispose of the device components and optional accessories according to applicable local regulations Unlawful disposal may cause environmental pollution SAFETY INFORMATION A Do not use a cellular phone near the device It may result in an operational failure A Use only Omron authorized parts and accessories Parts and accessories not approved for use with the device may damage the unit A Use only 1 5 V AAA alkaline batteries with this device Do not use other types of batteries This may damage the unit CARE AND MAINTENANCE A Do not subject the monitor to strong shocks such as dropping the unit on the floor A Do not submerge the device or any of the components in water A Store the device and the components in a clean safe location A Changes or modification not approved by the manufacturer will void the user warranty Do not disassemble or attempt to repair the unit or components BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations 1 Avoid eating drinking alcohol smoking exercising and bathing for 30 minutes before taking a measurement Rest for at least 15 minutes before taking the measurement Stress raises blood pressure Avoid taking measurements during stressful times The cuff can be applied to your left or right wrist Measurements should be
15. stallation 22 Irregular or weak pulses are detected TROUBLESHOOTING TIPS PROBLEM CAUSES AND SOLUTIONS Replace both batteries with new ones at the same time Check the battery installation for proper placement of the battery polarities No power No display appears on the unit Blood pressure varies constantly Many factors including stress time of day how you wrap the cuff may affect your blood pressure Review the sections Before Taking a Measurement and Taking a Measurement Measurement values appear too high or too low 23 FCC STATEMENT Note POTENTIAL FOR RADIO TELEVISION INTERFERENCE for U S A only This product has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation The product generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If the product does cause harmful interference to radio or television reception which can be determined by turning the product on and off the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocat
16. the unit off before replacing the batteries If the batteries are removed while the unit is still on the date and time will be reset to that of the previous use The measurement results are not deleted e When the batteries are replaced you may need to reset the date and time If appears on the display refer to Setting the Date and Time The batteries included with the device may have a shorter life A CAUTION Dispose of the device components and optional accessories according to applicable local regulations Unlawful disposal may cause environmental pollution 12 SETTING THE DATE AND TIME Set the monitor to the current date and time before taking a measurement for the first time If the date and time has not been set the measurement values are stored without any date or time information 1 TO START THE SETTING Press the Date Time Setting button to adjust the date and time The year flashes on the display 2 SETTING THE YEAR Press the Date Time Setting button p gt to advance by increments of one year Press the Date Time Setting button to set the current year The month flashes on the display NOTES The year can be set between 2010 and 2040 When the display reaches 2040 it will return to 2010 Press and hold the p gt button to increase the date and time values faster 13 SETTING THE DATE AND TIME 3 SETTING THE MONTH Lu Press the Date Time Setting button p gt to ad
17. vance by a i i increments of one month s Press the Date Time Setting button to set the current month The day flashes on the display 4 SETTING THE DAY Press the Date Time Setting button p gt to advance by increments of one day Press the Date Time Setting button to set the current day The hour flashes on the display 5 SETTING THE HOUR The time is set using AM or PM Press the Date Time Setting button p gt to advance by increments of one hour Press the Date Time Setting button to set the current hour The minute flashes on the display 6 SETTING THE MINUTE Press the Date Time Setting button p gt to advance by increments of one minute Press the Date Time Setting button to set the minute setting 7 TO TURN THE MONITOR OFF Press the START STOP button 14 APPLYING THE WRIST CUFF A CAUTION Read all of the information in the instruction manual and any other literature in the box before operating the unit A CAUTION This device is intended for use in measuring blood pressure and pulse rate in the adult population Do not use this device on infants or persons who cannot express their intentions APPLYING THE CUFF ON THE LEFT WRIST 1 Hold the bottom part of the cuff and wrap it around the tightly on your arm This may constrict the flow of blood in Roll up sleeve Make sure your sleeve is not rolled up too le your arm Wrap the cuff directly against your skin
Download Pdf Manuals
Related Search