Gioteck VX-1
Contents
1. Connect the VX 1 to your conso Insert the usb dongle into a usb port on the console The LED on the dongle will receiving mode not pairing All the LEDs on the contro time one or two will rema controller and the LEDs wi Repeat steps 4 amp 5 Some disconnect the dongle and e via its charging lead flash quickly slow flashing is mode 4 Immediately press the home button on your controller ler will flash and after a short in solid Immediately disconnect the charging lead from the flash again times pushing the home button again will speed up this process If the controller fails to respond repeat the process but make sure that you reinsert To add multiple controllers up to 7 or assign your controller to a different port go to Accessory settings gt Reassign controller Important Notices e Make sure that the battery is fully charged before first use For the first few weeks your controller may need more frequent and longer periods on charge Use of the vibration feature will shorten the gaming time e Resetting your controller f your controller loses connection with its dongle and will not pair take a small pointed object and insert it into the hole found on the back of the controller Pushing down on the button inside will reset the controller Remove the dongle from the PS3 and switch off the console remov2. e the PS3 s power cord from the electrical socket wait 15 seconds then plug in and turn on the console Then follow the pairing instructions
Download Pdf Manuals
Related Search