Philips CarStudio CE132
Contents
1. enable the TA Traffic Announcement function 1 Press and hold u to access the system menu D Press vau zone repeatedly until TA ON or TA OFF is displayed 3 Rotate amp to select a set ng TA ON When a traffic announcement is on air the system automatically switches to the tuner mode and begins to broadcast the traffic announcement When the traffic announcement is over the system returns to the previous mode TA OFF Traffic announcement does not cut in Tip e When a traffic announcement cuts in you can press S to switch the system to the previous mode Synchronize the system clock You can synchronize the system clock with an RDS station that transmits time signals 1 2 Press and hold veu to access the system menu Press menu zone repeatedly until CT ON or CT OFF is displayed Rotate amp to select a setting CT ON Synchronize the system clock with the RDS station automatically CT OFF The automatic clock synchronization with RDS station is disabled Tip e The accuracy of time depends on the RDS station that transmits time signals 6 Play from a storage device 1 Connect a compatible USB storage device or SD SDHC card For an SD SDHC card detach the front panel first insert the card into the2. 3 Press amp to select the folder L gt The system starts playing the first track under the folder 7 Listen to an external player You can use the system to amplify the audio input from an external player for example MP3 player 1 Switch the source to MP3 LINK 2 Connect an MP3 link cable to e the MP3 LINK socket on the system and e the audio output socket usually the headphone socket on the external player 3 Play the external player EN 17 8 Adjust sound The following operations are applicable to all supported media Button Function amp Rotate to increase or decrease the volume level amp Press to mute the speakers or release hem from mute status MAX Press to enable or disable the SOUND P DBB maximum volume max Press and hold to enable or disable SOUND DBB he Dynamic Bass Boost DBB effect EQ Press repeatedly to select a sound AUDIO equalizer EQ T Press and hold to activate the setup AUDIO of customized sound equalizer 2 Press repeatedly to select an option BAS bass TRE treble BAL balance or FAD fader 3 Rotate K to adjust the setting 9 Additional information Reset the system If the system works abnormally reset the system to factory default settings 1 Detach the front panel 2 Press the RESE
3. car audio system Caution e Use the controls only as stated in this user manual Always follow the instructions in this chapter in sequence These instructions are for a typical installation However if your car has different requirements make the adjustment accordingly If you have any question regarding installation kits consult your local retailer e This system is designed for negative ground earth 12V DC operation only e Always install this system in the car dashboard Other locations can be dangerous as the rear of the system heats up during use To avoid short circuit before you connect make sure that the ignition is off e Make sure that you connect the yellow and red power supply leads after all other leads are connected e Make sure that all loose leads are insulated with electrical tape e Make sure that the leads do not get caught under screws iron parts that will move e g seat rail e Make sure that all ground earth leads are run to a common ground earth point e Use only the supplied mounting hardware for a safe and secure installation e Improper fuses can cause damage or fire When you need to change the fuse consult a professional e When you connect other devices to this system make sure that the rating of the car circuit is higher than the total fuse value of all the connected devices e Never connect speaker wires to the metal body or chassis of the car e Never connect sp
4. mp3 files Sampling frequencies 32 kHz 44 1 kHz 48 kHz Bitrates 8 320 kbps and variable bitrates e wma files Versions V4 V7 V8 V9 L1 and L2 Sampling frequencies 44 1 kHz 48 kHz Bitrates 64 192 kbps and variable bitrates ID3 tagV2 0 or later e Unsupported files AAC WAV and PCM files DRM protected WMA files way m4a m4p mp4 and aac WMA files in lossless format What s in the box Check and identify the contents of the package SIISII Main unit with a sleeve Carrying case with front panel included Trim plate Disassembly tool X 2 User manual CD ROM for user manual EN 3 Overview of the system PHILIPS CarStudio AUDIO SYSTEM TUNER CEI32 Cc wee pA ccm ort a E N JMI IV A sore Dise 18 m2 3rer snug 5 m6 J OD OOM Q A MP3 LINK Unlock the front panel e Connect to the audio output socket a usually the headphone socket of an MENU _ external device For wma and mp3 tracks press to select the previous folder gt ii G e Press and hold to access the system Start pause or resume the play of menu tracks Press to select a tuner band e In radio mode press to select the preset radio station of No 6 D e n radio mode press and hold to st
5. Always there to help you Register your product and get support at www philips com welcome a Question Contact Philips CE132 User manual PHILIPS Contents 1 Safety Z 2 Your car audio system 3 Introduction 3 What s in the box 3 Overview of the system 4 3 Install the car audio system 7 Connect wires 7 Mount into the dashboard 8 Attach the front panel 9 4 Get started 10 For the first time use 10 Set the time format 10 Set the clock 10 Select a source 10 Select a listening zone 10 Mute the button beep 11 5 Listen to radio 12 Select a tuner region 12 Select a tuner sensitivity 12 Search for a radio station 12 Store radio stations in memory 12 Play with RDS 13 6 Play from a storage device 15 Control play 15 Switch tracks 15 7 Listen to an external player 17 8 Adjust sound 18 9 Additional information 19 Reset the system 19 Replace the fuse 19 10 Product Information 20 11 Troubleshooting 21 12 Notice 22 Care of the environment 22 Trademark notice 22 Copyright 22 13 Glossary 23 EN 1 Safety Read and understand all instructions before you use this device If damage is caused by failure to follow instructions the warranty does not apply odification of the product could result in hazardous radiation of EMC or other unsafe operation The device is designed for negative ground earth 12V DC operation only To ensure safe driving adjust the volume to a safe and co
6. For wma and mp3 tracks press to access the track list 3 DsP AS SOURCE EQ AUDIO OK v ZONE Press repeatedly to display available formation about the current track ress repeatedly to display available DS information ress and hold to display the set clock UD DU Press repeatedly select a source n radio mode press and hold to activate the automatic search of radio stations Press repeatedly to select a preset sound equalizer Press and hold to activate the setup of bass treble balance and fader Press to turn on the system Press and hold to turn off the system Press to mute the speakers or release hem from mute status Press to confirm an option Rotate to switch between menu options Rotate to adjust the volume level For wma and mp3 tracks press to select the next folder Press and hold to activate the selection of listening zones Press to select a tuner band lt lt gt gt Tune to a radio station Press to skip to the previous next rack Press and hold to rewind a track or search fast forward EN 5 max Ok e Press to enable or disable the maximum volume e Press and hold to enable or disable he DBB dynamic bass boost sound effect BAND Press repeatedly to select a tuner band 1 Slot for SD SDHC card e Insert an SD SDHC card Q2 RESET e Press to reset the system to factory default settings 3 Install the
7. T button with the tip of a ball point pen or toothpick L gt All settings are reset to factory default Replace the fuse If there is no power check the fuse and replace it if it is damaged 1 Check the electric connection 2 Remove the damaged fuse from the rear panel 3 Insert a new fuse with the same specifications 15 A K USE 15A Note e Ifthe fuse gets damaged immediately after it is replaced an internal malfunction may occur In such case consult your Philips retailer EN 19 10 Product Information Note e Specifications are subject to change without prior notice General Power supply 12V DC 11V 16V negative ground Fuse ISA Suitable speaker 4 80 impedance Maximum power 50 W x 4 channels output Continuous power 22 W x 4 RMS output 4 Q 10 T H D Pre Amp output 2 5V voltage Aux in level gt 500 mV Radio Frequency range FM 87 5 108 0 MHz 100kHz per step in auto search and 50kHz per step in manual search Usable sensitivity FM S N 20 dB 8 uV Frequency range 522 1620 KHz 9 kHz AM MW 530 1710 kHz 10 kHz Usable sensitivity 30 uV AM MW S N 20 dB 20 EN 11 Troubleshooting Warning e Never remove the casi
8. card slot and then attach the front panel 2 Switch the source to USB or SD SDHC When a USB storage device is connected and recognized the system switches the source to USB automatically 3 Ifthe play does not start press PII 6 Control play A w Press repeatedly to select a folder MENU ZONE PIG Pause or resume play lda Press to play the previous or next gt Pi rack lda Press and hold to rewind a track PPI or search forward fast DISP Press repeatedly to display available information about the current track 3 REP Press repeatedly to select a repeat mode e REP ONE repeat the current track e RPT FLD repeat all tracks in the current folder or e RPT ALL repeat all tracks in the storage device SHUF 4 Press repeatedly to select a play mode e SHU ALL play all tracks randomly e SHU FLD play tracks in the current folder randomly or e SHU OFF play all tracks in the storage device in sequence Switch tracks During play you can switch tracks or folders quickly Switch tracks directly 1 Press 1 JJ to access the track list L gt The file name of current track scrolls 2 Rotate amp to toggle through tracks 3 Press amp to play the selected track EN 15 Switch folders for a track 1 Press till 2 to access the folder list L gt The name of current folder scrolls 2 Rotate amp to toggle through folders
9. eaker wires with stripes to one another Connect wires Note e The ISO male connectors are not supplied e Make sure that all loose leads are insulated with electrical tape Consult a professional to connect wires as instructed below 1 Check the car s wiring carefully and connect them to the the ISO male connectors b lt O b ISO male Connect to connectors a Green strip black Rear left speaker edged green strip b White strip black Front left speaker edged white strip c Gray strip black Front right speaker edged gray strip d Purple strip black Rear right speaker edged purple strip e Red strip gnition key 12V DC when ON ACC f Blue strip Motor electric antenna relay control lead g White edged blue Amplifier relay strip control lead h Black strip Ground i Yellow strip To the 12V car battery which is energized at all times EN 7 2 Connect the antenna and amplifier as illustrated if applicable Sockets on rear External sockets or panel connectors 1 For ISO male As indicated above connectors 2 REARL Rear left speaker 3 REARR Rear right speaker 4 ANTENNA Antenna Tip e The pin arrangement for the ISO connectors depends on the type of your vehicle To avoid damage to the unit connect properly Mount into the dashboard e If
10. ijke Philips Electronics N V Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly 13 Glossary M MP3 A file format with a sound data compression system MP3 is the abbreviation of Motion Picture Experts Group 1 or MPEG 1 Audio Layer 3 S SD Secure Digital A type of memory card with a flash memory SDHC Secure Digital High Capacity SDHC is a type of flash memory card based on the SDA 2 00 specification The SDA 2 00 specification enables SD cards to reach higher capacities from 4GB to 32GB and growing W WMA Windows Media Audio An audio format owned by Microsoft is a part of Microsoft Windows Media technology Includes Microsoft Digital Rights Management tools Windows Media Video encoding technology and Windows Media Audio encoding technology EN 23 PHILIPS Specifications are subject to change without notice 2012 Koninklijke Philips Electronics N V All rights reserved CE132_12_UM_V3 0
11. ions you can change the tuner sensitivity 1 Press and hold satu to access the system menu 2 Press wau ze repeatedly until LOC ON or LOC OFF is displayed 3 Rotate amp to select a setting e LOC ON Search for radio stations with strong signals only e LOC OFF Search for radio stations with strong and weak signals 12 EN Search for a radio station Search for a radio station automatically Press kK or PP to search for the previous or next radio station with strong signals Search for a radio station manually 1 Press and hold Kd or Pl until M blinks 2 Press Ke or DPI repeatedly until the target frequency is displayed Store radio stations in memory Note You can store a maximum of six stations in each band Store radio stations automatically 1 Switch the source to RADIO 2 Press BAND Sen or ze repeatedly to select a band 3 Press and hold AS SOURCE until STORE is displayed L gt After the search is complete the first stored radio station is broadcast automatically e To select a stored radio station press 1 JJ wl 2 3REP SHUF 4 5 or PIG Store radio stations manually 1 Press BAND ison Or zone repeatedly to select a tuner band 2 Ture to the radio station that you want to store 3 Press and hold 1 J3 wall 2 3 REP SHUF 4 5 or PII 6 to store the radio station at the selected channel e To select a stored radio station press 1 J3
12. mfortable level mproper fuses can cause damage or fire When you need to change the fuse consult a professional Use only the supplied mounting hardware for a safe and secure installation To avoid short circuits do not expose the device to rain or water The device shall not be exposed to dripping or splashing Do not place any sources of danger on he device e g liquid filled objects lighted candles Never insert objects into the ventilation slots or other openings on the device Clean the device with soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the device EN 2 Your car audio system Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Introduction With this system you can e enjoy audio from USB storage devices SD SDHC card and other external players and e listen to radio stations You can enrich sound output with these sound effects Dynamic bass boost DBB e Digital sound control DSC Playable media e USB storage device e Compatibility USB 2 0 USB 1 1 e Class support MSC Mass Storage Class aximum capacity 32 GB e SD SDHC card e aximum capacity 32 GB e Files e File system FAT16 FAT32 aximum number of folders 99 aximum number of tracks files 999 e aximum level of directory 8
13. ng of this product To keep the warranty valid never try to repair the product yourself If you encounter problems when using this product check the following points before requesting service If the problem remains unsolved go to the Philips Web page www philips com support When you contact Philips make sure that the product is nearby and the model number and serial number are available No power or no sound e The power supply from car battery is cut off or the car battery runs out of energy Power the system with car battery Car engine is not on Turn the car engine on Cable is not correctly connected Check connections e The fuse is burnt Replace the fuse Volume is too low Adjust volume e If the above solutions cannot help press the RESET button e Make sure that the current track is in a compatible format Noise during broadcast e Signals are too weak Select other stations with stronger signals Check the connection of the car antenna e Change the broadcast setting from stereo o mono Preset stations are erased e Battery cable is not correctly connected Connect the battery cable to the terminal hat is always live Display shows ERR 12 Data error Check the USB storage device or SD SDHC card EN 21 12 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authorit
14. ore e Return to the previous menu the current radio station at channel LCD screen No 6 Connect to a USB storage device GO aN EN 1 wh 2 QIN SHUF 4 3 REP n radio mode press to select the preset radio station of No 5 n radio mode press and hold to store he current radio station at channel o 5 n radio mode press to select the preset radio station of No 4 n radio mode press and hold to store he current radio station at channel 0 4 For wma and mp3 tracks press repeatedly to select a play mode play all tracks randomly SHU ALL play racks in the current folder randomly SHU FLD or play all tracks in the storage device in sequence SHU OFF n radio mode press to select the preset radio station of No 3 n radio mode press and hold to store he current radio station at channel o 3 For wma and mp3 tracks press repeatedly to select a repeat mode repeat the current track REP ONE repeat all tracks in the current folder RPT FLD or repeat all tracks in the storage device RPT ALL n radio mode press to select the preset radio station of No 2 n radio mode press and hold to store he current radio station at channel o 2 For wma and mp3 tracks press to access the folder list n radio mode press to select the preset radio station of No 1 n radio mode press and hold to store he current radio station at channel 0 1
15. that are stored on it SD SDHC When an SD SDHC card is inserted and recognized you can select this source to play audio files that are stored on it Select a listening zone 1 Press and hold z until one of the following options is displayed e ALL For all passengers FRONT L For the front left seat only FRONT R For the front right seat only FRONT For front passengers only 2 Press wau 2 repeatedly to select a listening zone Mute the button beep The beep sound of buttons is enabled by default 1 Press and hold u to access the system menu 2 Press wan ze repeatedly until BEEP ON or BEEP OFF is displayed BEEP ON Enable the beep sound of buttons BEEP OFF Mute the beep sound of buttons 3 Rotate Or amp to change the setting EN 11 5 Listen to radio Select a tuner region You can select a radio region that matches your location 1 In radio mode press and hold mu tO access the system menu 2 Press wit 20 repeatedly until one of the following options is displayed e AREA EUROPE Western Europe AREAASIA Asia Pacific e AREA MID EAST Middle East e AREA AUST Australia e AREA RUSSIA Russia e AREA USA United States e AREA LATIN Latin America e AREA JAPAN Japan 3 Rotate amp to select a region Select a tuner sensitivity To search for radio stations with strong signals only or more radio stat
16. the car does not have an on board drive or navigation computer disconnect the negative terminal of the car battery e If the car battery is not disconnected to avoid short circuit make sure that the bare wires do not touch each other 1 Make sure that the car dashboard opening is within these measurements op E E LO 2 Remove the mounting sleeve with the supplied disassembly tools 3 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve 4 Slide the unit into the sleeve until you hear a click 6 Reconnect the negative terminal of the car battery Attach the front panel d Insert the notch on the front panel to the chassis on the main unit 2 Press the left end of the front panel inwards until it is securely locked with a click 000000000090090 00000000000090 PHILIPS Detach the front panel Note e Before you insert an SD SDHC card or reset the system detach the front panel Before you detach the front panel make sure that the system is turned off 1 Press uA to release the front panel 2 Pull the front panel outwards to remove it EN 9 4 Get started For the first time use 1 Press amp to turn on the system tL PHILIPS is displayed and then SELECT OPERATING REGION select a radio region scrolls 2 When one of the following options is displa
17. to access the list of program types 14 CLASSICS 15 OTHER M Special music programs 16 WEATHER Weather 17 FINANCE Finance 18 CHILDREN Children s programs 19 SOCIAL Social Affairs 20 RELIGION Religion 21 PHONE IN Phone In Classical music 2 TRAVEL Travel 23 LEISURE Leisure oai JAZZ azz Music 25 COUNTRY Country Music 26 NATION M ational Music 27 OLDIES Oldies Music 28 FOLK M Folk Music 29 DOCUMENT Documentary 30 TEST Alarm Test 31 ALARM Alarm EN 13 Use alternate frequencies If the signal of an RDS station is poor enable the AF Alternate Frequency function to search for another station that broadcasts the same program 1 Press and hold fu to access the system menu ress menu zone repeatedly unti or 2 Press wu zXe repeatedly until AF ON AF OFF is displayed 3 Rotate amp to select a setting e AF ON Enable the AF function AF OFF Disable the AF function Set the region for AF tuning You can set the region for AF tuning 1 Press and hold saw to access the system menu 2 Press nau z repeatedly until REG ON or REG OFF is displayed 3 Rotate amp to select a setting REG ON Only RDS stations in current region can be tuned to automatically e REG OFF All RDS stations can be tuned to automatically Receive traffic announcement If you want to receive traffic announcement
18. wl 2 3REP SHUF 4 5 or PIG Play with RDS The RDS Radio Data System function operates only in areas with FM stations broadcasting RDS signals If you tune to an RDS station the station name is displayed Enable the RDS function 4 Rotate amp to select a program type and then press amp to confirm Item Program Description type 1 NEWS News services 2 AFFAIRS Politics and current affairs 3 INFO Special information programs ay SPORT Sports 5 EDUCATE Education and advanced training 6 DRAMA Radio plays and literature 7 CULTURE Culture religion and society 8 SCIENCE Science 9 VARIED Entertainment programs Note 10 POP M Pop music The RDS function is enabled by default 11 ROCK M Rock music Only when the RDS function is enabled RDS related ile EASY M Light music settings car be accessed 13 LIGHTM Light classical music 1 Press and hold satu to access the system menu D Press wu ze repeatedly until RDS ON or RDS OFF is displayed 3 Rotate amp to select RDS ON L gt The RDS function is enabled e To disable the RDS function rotate amp to select RDS OFF Select a program type Before tuning to RDS stations you can select a program type to search for programs of the selected category only 1 Press and hold u to access the system menu D Press wu ze repeatedly until PTY is displayed 3 Press amp
19. y to operate the equipment Care of the environment ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused ps When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment 22 EN Trademark notice Ay Plays a Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries Other trademarks and trade names are those of their respective owners Copyright 2012 Koninkl
20. yed rotate K to select a radio region that matches your location e AREA EUROPE Western Europe e AREAASIA Asia Pacific e AREA MID EAST Middle East e AREA AUST Australia e AREA RUSSIA Russia AREA USA United States e AREA LATIN Latin America AREA JAPAN Japan 3 Press amp to confirm L gt The system switches to radio mode automatically e To turn off the system press and hold amp until the screen backlight is off Set the time format 1 Press and hold satu to access the system menu 2 Press wau z repeatedly until CLK 24H or CLK 12H is displayed 3 Rotate amp to select CLK 24H or CLK 12H e CLK 24H 24 hour time format e CLK 12H 12 hour time format Set the clock Press and hold wenu to access the system menu 2 Press wu ze repeatedly until CLK is displayed with time digits blinking 3 Rotate amp anti clockwise to set the hour 4 Rotate amp clockwise to set the minute Display the clock Press and hold DISP until CLK and the set clock are displayed e To exit the clock display press any button or rotate amp Select a source Press AS SOURCE repeatedly to select a source e RADIO Listen to FM AM radio e MP3 LINK Listen to the audio input through the MP3 LINK socket USB When a USB storage device is connected and recognized you can select this source to play audio files
Download Pdf Manuals
Related Search