Oregon Scientific GP123 sport watch
Contents
1. to decrease value or toggle options SET to confirm TIP To help device quickly detect weather conditions after its turned on for the first time or after battery reset you are recommended to manually set the weather icon If weather icon has not been set the unit will simply take longer to detect current weather conditions This device forecasts the next 12 to 24 hours of weather Partially cloudy Cloudy Rainy Sunny COMPASS MODE IMPORTANT Although the compass has been calibrated during the manufacturing process it is highly recommended to calibrate the compass before first use to take into account location factors which may affect the compass For more accurate readings it is strongly recommended to calibrate the compass whenever outdoors The compass should be calibrated Before first use After the battery has been replaced Before you leave for an extended outdoor activity e Whenever it is exposed to strong magnetic sources extreme cold or you suspect that other environmental conditions have affected the compass readings e If you notice that the compass is not showing the direction correctly The compass shows the bearing in degrees due North together with 16 cardinal ordinal points The outer circumference of the display consists of 16 segments that graphically show the bearing The last lit segment indicates North as shown below PAPI haai NOTE If no key has bee2. North option Display will show NORTH 4 Press SET to enter settings 5 Press L to select on off then press SET to confirm If ON has been selected rotate the unit to align direction indicator to true north when prompted then press SET to confirm NOTE If the declination angle is turned ON the True north function will automatically turn itself OFF and vice versa TIP Go outdoors and move to an open area for best GPS signal quality Stand still when device searches for GPS signal Press DISP repeatedly to navigate to GPS mode When in GPS mode the device automatically searches for GPS NOTE Upon exiting GPS mode GPS signal will remain locked for 60 seconds to allow navigating to other modes will flash during search The signal quality is as follows D Excellent w D Good D Poor No icon No signal For GPS function to operate signal quality needs to be good or excellent Once GPS signal has been found the device can store up to 3 locations at any one time For your convenience each location is represented by an icon Icon Suggested use GB Parking space D Home gt Favourite spot To mark location 1 Press L repeatedly to select desired icon 2 Press and hold L to save location into memory To search for stored location backtrack function 1 Press DISP repeatedly to navigate to GPS mode 2 Once GPS signal has been successfu
3. on A 11 GPS signal quality indicator 12 d Yr stored location parking space home favourite spot 13 D maximum altitude reached exceeded 14 Measurement units hPa m km ft inHg mi 15 lt low battery indicator 16 A direction indicator BATTERY REPLACEMENT The GP123 uses 2 x AAA batteries which have already been installed If the battery power of the unit is low amp and need new batt are displayed Promptly replace the battery to ensure continuous operation of GPS and other functions E z E To replace battery DISPLAYS 1 Lift up the ring lever part of the screw and rotate counter clockwise to open battery compartment OPERATION MODES 2 Remove battery compartment cover Press DISP to toggle between modes 3 Insert the batteries matching the polarities an 4 Close the battery compartment and rotate screw clockwise to secure TIME DATE ALARM Press SET to toggle between time date alarm in any mode TO SET CLOCK AND ALARM 1 Press and hold DISP to enter time setting mode 2 Set clock and alarm by pressing the following buttons L to increase value or toggle options DISP to decrease value or toggle options SET to confirm The setting options are hour format hour minute year calendar format month date alarm time hour minute alarm on off measurement unit NOTE For your convenience measurement units have been program
4. via our Oregon Scientific Customer Service EK CE amp Rots COUNTRIES RTTE APPROVAL COMPLIED All EU countries Switzerland H and NorwayCN
5. GPS Scout Backtrack Altimeter Model GP123 USER MANUAL INDEX Introduction Overview ROMUVIQW encoir 2 ECD Sofo wiseccscciscsissevssasesestaesseevecevenecisrsvensteterseests 3 Battery replacement Displays Operation modes Time date alaniini 4 To set clock and alarm Altimeter and barometer modes About the altimeter barometer To set and reset altimeter eeeeeeeeeeeeeneeee 5 To set Sea level pressure eee e ee ceeeeeeneeeeeeeenens 6 Compass mode About the compass Compass sensor Calibration c cccceeeeeees 7 Declination Angle wnvsccsiveccsescesessescsscecsecesecssenscasevaoctes 7 True North calibration ceeeeeeeeeeeeeeeeeeeeeneeee 8 About Oregon Scientific GPS MOG eraann aeaa RANAN AASA LED light Backlight keypad lock Water resistance Specie HOME iaiia aaa E PreGaUtiOns sociqcsicssecccscecaccccscsanccexseseuccevenstactedecdzccsncnetees EU declaration of conformity EEE o a wW INTRODUCTION OVERVIEW Thank you for selecting the Oregon Scientific GPS Scout Backtrack Altimeter GP123 Useful for any outdoor activity the GP123 comes equipped with GPS altimeter barometer compass and alarm With easy to view display and sturdy yet comfortable palm grip design the GP123 is useful when venturing outdoors View at a glance temperature time and weather forecast information as well as data relating to alti
6. ination jsp 1 Enter your zip code in the text box 2 Click Get Location 3 Scroll down and click Compute For declinations in Canada http geomag nrcan gc ca apps mdcal eng php For places elsewhere in the world visit the website http www magnetic declination com When you set the declination angle on the compass you compensate for the difference between true and magnetic north This makes the compass reading more accurate To set the declination angle 1 Press DISP repeatedly to navigate to compass mode 2 Press and hold SET Display will show CALI 3 Press DISP to toggle to declination option Display will show DECLI Press SET to confirm 5 Set the following options on off West East only if ON is selected degree of declination angle by pressing the following buttons L to increase value or toggle options DISP to decrease value or toggle options SET to confirm When you do not know the declination angle the true north calibration function can be used to compensate for the difference between magnetic and true north All you need to know is the direction of true north this can be found from landmarks in your immediate vicinity Setting the true north calibration makes the compass reading more accurate To set True North calibration 1 Press DISP repeatedly to navigate to compass mode Press and hold SET Display will show CALI Press DISP to toggle to True
7. lectronic circuitry as there is a danger of electric shock Check all major functions if the device has not been used for a long time Maintain regular internal testing and cleaning of your device When disposing of this product ensure it is collected separately for special treatment and not as normal household waste Due to printing limitations the displays shown in this manual may differ from the actual display The contents of this manual may not be reproduced without the permission of the manufacturer NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice NOTE Features and accessories will not be available in all countries For more information please contact your local retailer ABOUT OREGON SCIENTIFIC Visit our website www oregonscientific com to learn more about Oregon Scientific products If you re in the US and would like to contact our Customer Care department directly please visit www2 oregonscientific com service support asp For international inquiries please visit www2 oregonscientific com about international asp EU DECLARATION OF CONFORMITY Hereby Oregon Scientific declares that this GPS Scout Backtrack Altimeter model GP123 is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the signed and dated Declaration of Conformity is available on request
8. lly found press L repeatedly to select the symbol which represents the location you wish to return to 3 Walk according to the arrow direction as shown on the LCD display The display will also show the remaining distance When REACH appears you have arrived at the desired location NOTE REACH will appear when you are close to the saved location NOTE If no key has been pressed in any 15 minute period SLEEP will appear on the display indicating GPS has timed out Press any key to return to GPS mode NOTE Prolonged usage of backtrack function will shorten battery life LED LIGHT To turn on LED light e Press and hold Y light will remain on for the duration it is pressed BACKLIGHT KEYPAD LOCK To activate backlight e Press 292 to turn on backlight for 3 seconds NOTE The backlight function will not operate if lt z is displayed To toggle keypad lock On or Off e Press and hold 9 a indicates keypad is locked WATER RESISTANCE The GP123 is splash proof only SPECIFICATIONS Real time clock 12 24 hour with hour minute Temperature 5 C to 50 C range 28 F to 116 F 400 to 9 000 m Altitude range 1312 to 29 520 ft 10 Barometric 300 to 1 100 hPa pressure range 8 86 to 32 48 inHg Sea level pressure 900 to 1 100 hPa range 26 58 to 32 48 inHg Weather forecast Sunny partially sunny cloudy rainy Digital compass 16 cardinal
9. med to automatically follow the same format imperial metric will appear when alarm has been enabled To disable alarm Press any key ALTIMETER AND BAROMETER MODES The altimeter measures altitude in either meters or feet The device is equipped with an intelligent barometer that determines altitude by the built in sensor and advanced Baro compensation technology It also distinguishes the differences between pressure caused by the changes in physical altitudes and pressure caused by weather conditions This eliminates discrepancies and makes the altimeter more accurate than most of the average devices available on the market Maximum altitude and instant sea level pressure readings are also provided The altitude is automatically measured from the moment you switch on the device It will provide both barometer readings and maximum sea level pressure readings To set and reset altimeter 1 Press DISP repeatedly to navigate to altimeter mode 2 Press and hold SET to enter settings 3 Press L or DISP to change current altitude then SET to confirm 4 Press X or DISP to select whether to clear maximum altitude record yes no then SET to confirm 1 Press DISP repeatedly to navigate to barometer mode 2 Press and hold SET to enter settings 3 Set the following options sea level pressure weather forecast icons by pressing the following buttons X to increase value or toggle options gg DISP
10. n pressed in any 5 minute period the compass will time out and return to Altimeter mode default display COMPASS SENSOR CALIBRATION NOTE Always take bearings in the open air not inside buildings tents caves or other shelters Compass readings should be performed away from magnetic materials Avoid large magnetic objects power lines loudspeakers electric motors etc Compass calibration should be done on a flat horizontal surface If there is no flat stable surface available place it on the palm of your hand so that it is perpendicular to your body Using the other hand turn the unit to calibrate To calibrate the compass sensor 1 Press DISP repeatedly to navigate to compass mode 2 Press and hold SET Display will show CALI and smart prompt B Press SET to start calibration Rotate the unit clockwise at a constant speed The moving segments around the circumference of the display act as a guide The rotation will be finished once you have performed 2 turns NOTE OK indicates calibration has been successfully completed Repeat steps 2 4 if FAIL is displayed DECLINATION ANGLE Declination is the angle between where a compass needle points magnetic North Pole and the true North Pole The declination angle can vary from 0 30 degrees East E or West W and can be found on most maps or on the Internet For declinations in the United States http www ngdc noaa gov geomagmodels Decl
11. ordinal points Power 2 x UM 4 AAA 1 5V batteries Operating 5 C to 50 C temperature 28 F to 116 F Storage 10 C to 70 C temperature 1 F to 135 F PRECAUTIONS To ensure you use your product correctly and safely read these warnings and the entire user manual before using the product Use a soft slightly moistened cloth Do not use abrasive or corrosive cleaning agents as these may cause damage Use luke warm water and mild soap to clean he unit thoroughly after each training session Never use the products in hot water or store them when wet Do not subject the product to excessive force shock dust temperature changes or humidity Never expose he product to direct sunlight for extended periods Such reatment may result in malfunction Do not tamper with the internal components Doing so will terminate the product warranty and may cause damage The main unit contains no user serviceable parts Do not scratch hard objects against the LCD display as this may cause damage Take precautions when handling all battery types Remove the batteries whenever you are planning to store the product for a long period of time When replacing batteries use new batteries as specified in this user manual The product is a precision instrument Never attempt to take this device apart Contact the retailer or our customer service department if the product requires servicing Do not touch the exposed e
12. tude barometer compass and GPS depending on your selection Store up to 3 locations and use the backtrack function to easily navigate your way back IMPORTANT The measurement functions built into the GP123 are not meant to substitute professional measurement or industrial precision devices Values produced by this device should be considered as reasonable representations only Oregon Scientific assumes no responsibility for any loss or any claims by third parties that may arise through the use of this device 1 LED light 2 L select location 4 4 Yr store location into memory increase value of the setting toggle setting options als 10 DISP toggle between modes enter time setting mode decrease value of the setting toggle setting options SET confirm setting toggle bottom line display time date alarm enter settings for altitude barometer compass lo A turn on LED light W turn on backlight lock unlock keypad B SY mn S 11 RS HSE Q A ou oO ON Indicates which mode ALTI BARO COMPASS GPS is displayed altitude barometer compass GPS 2 Temperature 3 Weather forecast 4 Key press prompt press SET CAME press and hold SET A keypad is locked 8 sea level is displayed AM PM 12 hour format i alarm time is displayed 5 6 Fa altitude memory is being deleted 8 9 1 0 8 daily alarm is
Download Pdf Manuals
Related Search