Unicol GKU4 project mount
Contents
1. the projector adjust arm lengths 2 to position plate centrally over the projector taking care not to cover any ventillation holes Tighten knurled screws 3 JOINING THE UNIT TOGETHER Join the 2 parts of the GKU1 together by sliding the bottom half B into the top half A and fix using the dome headed allen screws C Adjust the telescopic section as required and fully tighten screws PROJECTOR ADJUSTMENT aby Using the pan tilt and screen levelling functions adjust the projector alignment Finally tighten all dome headed screws using the allen key provided RANGE OF DIFFERENT DROP LENGTHS The GKU2 installers kit comes with alternative telescopic sections which can be used in any combination to give 23 70cm adjustment intended particularly when working within suspended ceiling voids The GKU3 version has a longer telescopic section for use with high PROJECTOR ceilings The GKU4 version uses a CP2 Ceiling Plate and chrome column cut to length for installations requiring long drops there is no telescopic section with this model a he W If you have difficulty installing this product please call our Sales Support Team on 49 0 9131 94 05 800 www unicol de or sales unicol de2. UNGOL For video projectors up to 12Kg Gyrolock units may be fixed to normal or sloping ceilings with the telescopic section remaining vertical for correct video projector support When used as a wall mount the telescopic section works as an angled support arm allowing clearance for the tilt and swivel movements Units can also be base mounted for rear projection or other applications SAFETY We recommend installation by a Qualified Tradesperson Standard Gyrolock using masonry plugs or other reliable fixings to ensure safe installation GKU1 unit Consult your builder or architect if in doubt CEILING CEILING INSTALLATION STANDARD GKU 1 UNIT Establish the required projector to screen distance and fix the mounting plate and arm unit A to the ceiling through the holes provided in the mounting plate PROJECTOR MOUNTING Fix the Universal plate and telescopic section B to the projector using the screws provided These fixing screws pass through the hollow screws on the end of the universal plate arms 1 Adjust arm lengths 2 by loosening the knurled screws 3 to enable fixing screws to locate into projector fixing holes Level the Universal plate against the projector by screwing up or down the hollow screws 1 JOIN ARMS i FIX WITH SCREWS There are 4 sizes of fixing screw Qty 4 M6x30 colour silver Qty 4 M5x30 colour gold Qty 4 M4x30 colour black ae Qty 4 M3x30 colour silver 4 washers Once fixed to
Download Pdf Manuals
Related Search