Philips DS9800W
Contents
1. to join the same Wi Fi network as the speakers 1 18 Settings Wi Fi Networks Select Settings gt Wi Fi on your iPod touch iPhone iPad e _ Or enter the list of available wireless networks on your PC Mac Ask to Join Networks MTM BEN EU EE EEGUNA O VERN KJV JUNI AUK H ERS REROEVEE OWON AET 3 Wait until successful Wi Fi connection to the router L gt A Wi Fi signal icon is displayed on the AirPlay device EN 5 Play 3 Select Philips Fidelio XXXX or user customized name from the list Stream audio from your AirPlay device Note e Make sure that the AirPlay device is connected to the same Wi Fi network as the speakers Stream from your iOS 4 2 or later enabled iPod touch iPhone iPad 1 Open iPod 2 Tap on the AirPlay icon a Symphony No 9 Scherzo m Symphony No 9 Scherzo 44 DPI l a 5 Wait until successful audio streaming to the speakers EN 19 Stream from your Wi Fi enabled PC or Mac installed with iTunes 10 e Before you open iTunes make sure that you have enabled Bonjour service in your PC To enable the service you can click Start gt Settings gt Control Panel and double click Administrative Tools gt Services gt Bonjour Service then click Start followed by OK on the pop up menu Open iTunes 10 Click the AirPlay icon at the bottom right corner of the window Select Philips Fidelio XXXX or2. user customized name from the list Select a media file and start play VUA OW Na Wart until successful audio streaming to the speakers Control play You can select different play options from either your AirPlay device or the supplied remote control Note e All the operations below are based on the supplied remote control e To start or pause play press H e To skip to the previous or next track press I lt Pl e To adjust volume press repeatedly e To mute or restore volume press X e To switch to the MP3 link source if connected press e To switch back to the AirPlay device source press 0 20 EN Advanced sound settings For advanced sound settings and additional features you can use your AirPlay device to download the Philips Fidelio application from Apple App Store Update firmware Note e You can only update the firmware from a PC Mac Download the update file 1 on your PC Mac go to www philips com support 2 Enter the model number to find the latest firmware upgrade file available 3 Save the upgrade file to your hard drive Update from the configuration page 1 Power on the SoundSphere speakers see Prepare Connect Connect power Connect power to speakers L gt t takes about 35 seconds for the speakers to boot up During boot up the LED indicator on the back of the main speaker blinks in green quickly L gt After b
3. Inc Class Il equipment symbol a CLASS Il apparatus with double insulation and no protective earth provided Note e The type plate is located on the bottom of the apparatus 2 Your Docking Entertainment System Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the bottom of the apparatus Write the numbers here Model No Introduction With this unit you can e stream audio from your iOS 4 2 or later enabled device e g an iPod touch iPhone iPad wirelessly by AirPlay e stream audio from your Wi Fi enabled PC or Mac installed with iTunes 10 wirelessly by AirPlay e play audio from other audio devices through the MP3 link socket e charge your iPod iPhone iPad through the supplied standalone docking charger What s in the box Check and identify the contents of your package e 2x SoundSphere speakers e 1x speaker connection cable e 1x remote control with battery for the speakers e 1x AC power cord for the speakers e 1x MP3 link cable for the speakers e 1x standalone iPod iPhone iPad docking charger for charge only e 1x AC power adapter for the docking charger e User manual e Quick start guide What else you need To strea
4. K NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The exclamation mark calls attention to features for which you should carefully read the supplied literature to prevent operating and maintenance problems The lightening bolt symbol indicates uninsulated components within the product that can cause an electric shock To reduce the risk of fire or electric shock do not expose the product to rain or moisture and do not place any ojects filled with liquids such as vases on the product 1 Read these instructions 2 Keep these instructions G Heed all warnings 4 Follow all instructions Do not use this product near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not remove the casing of this product Only use this product indoors Do not expose the product to dripping splashing water rain or high humidity Keep this product away from direct sunlight naked flames or heat Do not install near any heat sources such as radiators heat registers stoves or other electrical equipment including amplifiers Do not place any other electrical equipment on the product Do not place any sources of danger on the product e g objects containing liquids burning candles This product may include batteries Please r
5. Register your product and get support at www philips com welcome DS9800W EN User manual PHILIPS Contents 1 Important Safety Notice Your Docking Entertainment System Introduction What s in the box What else you need Overview of the SoundSphere Speakers Overview of the remote control Overview of the docking charger Prepare Connect Set up a Wi Fi network for AirPlay Connect speakers to a Wi Fi network router Connect an AirPlay device to the same Wi Fi network Play Stream audio from your AirPlay device Control play Advanced sound settings Update firmware Charge your Pod iPhone iPad with the standalone dock Product information Specifications Troubleshooting OT Je e 13 13 18 19 19 20 20 20 21 22 a2 23 EN 1 Important Safety Mains fuse This information applies only to products with a UK mains plug This product is fitted with an approved molded plug If you replace the fuse use one with e the ratings shown on the plug e a BS 1362 approval and e the ASTA approval mark Contact your dealer if you are not sure about what type of fuse to use Caution To conform with the EMC directive 2004 108 EC do not detach the plug from the power cord Information for Europe Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BAC
6. Touch iPhone iPad Mac to do the first time Wi Fi setup as some PC settings may affect the Wi Fi network setup e Make sure that the SSID name of your home router consists of normal characters or digits with no space or special characters like inserted e If you choose to rename the AirPlay device Philips _ Fidelio XXXX in the setting menu do not use special characters or symbols e If you fail to get connected via WPS make sure that you are using a WPS certified router If the problem remains do not use the default SSID name for your WPS router The default SSID name may involve security protection that leads to connection failure Use simple characters or digits only to rename your WPS router Occasional breaking of AirPlay music streaming Do one or all of the following e Enable the Auto Channel Scan option if available on the Wi Fi router e Enable the Wireless Intelligent Stream Handling WISH option if available on the Wi Fi router e Enable the Quality of Service QoS option if available on the Wi Fi router e Turn off other home routers EN 23 No AirPlay icon on Apple AirPlay device or iTunes in my PC e Make sure that the SoundSphere speakers have already joined the AirPlay network e Before you open iTunes make sure that you have enabled Bonjour service in your PC Take Windows XP for example to enable the service you can click Start gt Settings gt Control Panel and dou
7. akers only 1 Unscrew the speaker connectors 2 Insert fully the end of a speaker cable with red mark into the left red connector 3 Screw the left red connector to secure the cable 4 insert fully the end of a speaker cable without red mark into the left black connector 10 EN 5 Screw the left black connector to secure the cable 6 Repeat steps 2 5 to insert the other speaker cable into the right connectors Connect an audio player optional You can also listen to an external audio player through the SoundSphere speakers e Connect the supplied MP3 link cable to e the MP3 LINK jack 3 5mm on the back of the main speaker e the headphone jack on an external audio player Note e To play audio from the connected audio player first press to select the MP3 link source Connect power 1 Caution e Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the bottom of the unit e Risk of electric shock When you unplug the AC power cord always pull the plug from the socket Never pull the cord e Before connecting the AC power cord make sure that you have completed all the other connections Connect power to speakers e Connect the AC power cord to e the AC IN socket on the back of the main speaker e the wall power socket e It takes about 35 seconds for the speakers to boot up During boot up the LED i
8. ble click Administrative Tools gt Services gt Bonjour Service then click Start followed by OK on the pop up menu e Ifthe problem remains try to restart the SoundSphere speakers AirPlay connection failed with Mac or PC e Disable the firewalls software and security software which may block ports that AirPlay uses to stream content e Check if your network speed is fast enough in cases where multiple devices share the same router the AirPlay performance may be affected Turn off the other devices connected to your home router e In case of audio streaming break or disconnection when you use IPod Touch iPhone iPad iMac PC for AirPlay restart your iPod Touch iPhone iPad Tunes or DS9800W e Browsing Internet content like news music video and etc via your home router may affect the AirPlay performance In case of AirPlay break or disconnection It is recommended to stop any Internet surfing or disconnect from the Internet 24 EN PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved DS9800W_10_UM_V1 1
9. ct Philips_ Fidelio XXX from the bonjour pull down list e Or open another web browser on your PC Mac then type in 192 168 1 1 at the address bar gt The DS9800W configuration Network Configuration page Is displayed http mam philip omend SoM IDL Essinklijke Fhilips Electronics MW All righty rasarsud EN 15 3 Change the name of the SoundSphere 5 Enter your network key if required for speakers in Airplay Device Name if you some routers you may also need to tick like DHCP under Advance Setting 4 Select your router SSID from the pull down list of Service Set ID SSID Philips_Fidelio 215B3B Apply Previous Next Previous ajwlejR t yjul ijojp Als pjFjajHja kjL 2 2 x c v B n mie 6 Click Apply at the bottom of the page to apply your settings L gt A menu for confirmation of your set parameters Pops up Service Set ID SSID WEP Keyl Key index hitp mam phi com ecund 2004 2011 Koninklijke Philips Electronica N V All rights reserved Click OK on the popup menu to confirm your settings L After awhile the LED indicator stops blinking and stays green and the main speaker beeps L gt The speakers join the Wi Fi network successfully EN 17 Connect an AirPlay device to 2 Select your router SSID from the list of available wireless networks the same Wi Fi network To work together with the SoundSphere speakers your AirPlay device is required
10. e 1999 5 EC directive Modifications Modifications not authorized by the manufacturer may void user s authority to operate this product Recycling ab Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC A Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Information about the use of batteries KA Caution e Risk of leakage Only use the specified type of batteries Do not mix new and used batteries Do not mix different brands of batteries Observe correct polarity Remove batteries from products that are not in use for a longer period of time Store batteries in a dry place e Risk of injury Wear gloves when handling leaking batteries Keep batteries out of reach of children and pets e Risk of explosion Do not short circuit batteries Do not expose batteries to excessive heat Do not throw batteries into the fire Do not damage or disassemble batteries Do not recharge non rechargeable batteries EN 5 R Battery disposal information Your product conta
11. efer to safety and disposal instructions for batteries in this user manual A Warning Never remove the casing of this apparatus e Never lubricate any part of this apparatus e Never place this apparatus on other electrical equipment e Keep this apparatus away from direct sunlight naked flames or heat e Ensure that you always have easy access to the power cord plug or adaptor to disconnect this apparatus from the power e For the WiFi SoundSphere speakers Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable e For the standalone docking charger Where the plug of the Direct Plug in Adapter is used as the disconnect device the disconnect device shall remain readily operable Risk of overheating Never install this apparatus In a confined space Always leave a space of at least four inches around this apparatus for ventilation Ensure curtains or other objects never cover the ventilation slots on this apparatus Notice CE This product complies with the radio interference requirements of the European Community CE 2150 ratte Directive 1999 5 EC UK EL IPT ICY J MT SPL Vv NO SGR GEL VEE O The device can be operated in the EU without restrictions indoor but cannot be operated outdoors in France in the whole of the band until further notice This product complies with the requirement of th
12. ferent types of wireless routers The SoundSphere speaker system Is compatible with the following iPod iPhone iPad models e Pad 2 e Pad e iPhone 4 e iPhone 3GS e iPod touch 2nd 3rd and 4th generation Before setup of the Wi Fi network check the points below 1 Make sure that the wireless router is powered on and working properly 2 Make sure that the LED indicator on the back of the main speaker blinks in green slowly 3 Check the type of the wireless router you use Connect speakers to a Wi Fi network router Select a scenario below that matches your router type e Each time when the speakers are powered on again the speakers enter the latest configured Wi Fi network automatically e Incase of setup failure repeat the steps or press and hold on the back of the main speaker and try again Scenario 1 Connect to a WPS PBC router T Press WiFi SETUP on the back of the main speaker L gt The LED indicator blinks in red green and yellow alternately EN 13 2 Press the WPS button on the wireless router Ls After awhile the LED indicator stops blinking and stays green and the main speaker beeps L gt The speakers join the Wi Fi network successfully e To change the name of the SoundSphere speakers for AirPlay proceed with steps 2 to 7 in Scenario 2 Connect to a non WPS router below e For some wireless routers you may need to h
13. hilips com welcome When you contact Philips ensure that the apparatus is nearby and the model number and serial number are available No power e Make sure that the AC power plug of the device is connected properly e Make sure that there is power at the AC outlet No sound e Adjust the volume e Check the network connection Set up the network again if needed see Set up a Wi Fi network router No response from the SoundSphere speakers e Press and hold on the back of the main speaker to reset the device Set up the network again see Set up a Wi Fi network router e Disconnect and reconnect the AC power plug then switch on the device again Wi Fi network connection failed e Check if your Wi Fi router is Wi Fi certified This device is only compatible with Wi Fi certified routers e This device does not support WPS Pin routers e This device does not support all WPS PBC routers see the user manual of your router Enable SSID broadcast on the Wi Fi router e Avoid using Wi Fi channel which is using or much overlapped by the nearby Wi Fi network e Keep away from potential sources of interference which may affect Wi Fi signal such as microwave ovens e If you fail to use your PC for Wi Fi network setup check whether your PC is using a Wi Fi network You cannot use Ethernet connection for AirPlay network setup If the problem remains it is strongly recommended to use IPod
14. ins batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment Made for iPod LliPhone iPad Lal AirPlay Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod iPhone or iPad may affect wireless performance AirPlay iPod and iPhone are trademarks of Apple Inc registered in the U S and other countries iPad is a trademark of Apple
15. m audio wirelessly by AirPlay you need e A wireless router that is powered on and working properly An AirPlay device e g an IOS 4 2 or later enabled iPod touch iPhone iPad or Wi Fi enabled PC or Mac installed with iTunes 10 EN 7 Overview of the SoundSphere Speakers OR e Turn on off the speakers e Press and hold reset the speakers 2 MP3 LINK e Socket for an external audio player G ACIN e Power socket of the speakers 4 Speaker connectors e Connect the two speakers 5 WiFi SETUP e Connect the speakers to a Wi Fi network 6 LED indicator e Show the current status of the speakers 7 IR sensor 8 EN Overview of the remote control Ye oe 2 amp 2 g Oo e Turn on off the speakers 0 e Select the AirPlay device audio SOUrce e Adjust volume K Mute or restore volume lt gt e Skip to the previous next track Pil e Start or pause play i e Select the MP3 link audio source Overview of the docking charger 4 DCIN e Power socket of the docking charger 2 ON OFF e Switch on or off the LED light around the docking charger G iPod iPhone iPad dock connector EN 3 Prepare Always follow the instructions in this chapter In sequence Connect Connect speaker cables Note e Insert the stripped portion of each speaker wire into the socket completely e For optimal sound use the supplied spe
16. ndicator on the back of the main speaker blinks in green quickly e After boot up the LED indicator starts to blink in green slowly Connect power to standalone docking charger optional EUR e To charge your IPod iPhone iPad connect the AC power cord to e the DCIN socket on the docking charger e the wall power socket Switch to standby The unit switches on automatically after power connection e To switch the unit to standby mode press on the back of the main speaker e To switch the unit on from the standby mode press again Prepare the remote control KN Caution e Risk of explosion Keep batteries away from heat sunshine or fire Never discard batteries In fire e Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate EN 11 For first time use 1 Remove the protective tab to activate the remote control battery To replace the remote control battery 1 Open the battery compartment 2 Insert one CR2032 battery with correct polarity as indicated 3 Close the battery compartment e Before pressing any function button on the remote control first select the correct source with the remote control instead of the main unit e f you are not going to use the remote control for a long time remove the battery 12 EN 4 Set up a Wi Fi network for AirPlay e Some operations may vary as you use dif
17. old the WPS button for WPS connection See the user manuals of the specific routers for details Scenario 2 Connect to a non WPS router You can connect the speakers to a non WPS router through e an IOS 4 2 or later enabled iPod touch iPhone iPad e a Wi Fi enabled PC or Mac installed with iTunes 10 14 EN Connect DS9800W to your iPod touch iPhone iPad or PC Mac d Press and hold WiFi SETUP on the back of the main speaker for more than 5 seconds L gt The LED indicator blinks in green and yellow alternately 2 Wait for about 45 seconds so that Philips Fidelio AirPlay is available in the list of Wi Fi networks 3 Select Settings gt Wi Fi on your iPod touch iPhone iPad e Or enter the list of available wireless networks on your PC Mac 4 Select Philips Fidelio AirPlay from the list of available networks R Google Settings Wi Fi Networks a Philips Fidelio Airplay 192 168 1 1 Other gt OEE EEEN EEE 5 Wait until successful Wi Fi connection to the SoundSphere speakers 2004 2011 Konijn Phi Electronics N V AN ightsrasarvad L gt A Wi Fi signal icon is displayed on the iPod touch iPhone iPad or PC Mac nr ee 2 Select the Network Configuration tab Configure Wi Fi connection from DS9800W to your wireless router 1 Open Safari on your iPod touch iPhone iPad then type in 192 168 1 1 at the s address bar e Or open Safari on your PC Mac then sele
18. oot up the LED indicator starts to blink in green slowly 2 Make sure that your SoundSphere speakers and PC Mac are connected to the same wireless router 3 Open Safari on your PC Mac then select Philips_ Fidelio XXX from the bonjour pull down list e Oropen the web browser on your PC Mac then type in the IP address of DS9800W available on the router configuration page at the address bar L The DS9800W configuration page is displayed Note e iPod with color display iPod classic and iPod with video are not compatible with dock charging 4 Select the Firmware Update tab then follow the on screen Instruction to enter the next page 5 Click Browse to select the downloaded firmware update file then click Open Load the iPod iPhone iPad 6 Click Upload to upload the file then compare the current and new file versions 7 After you make sure that the downloaded update file is the latest click Ok to start firmware update L gt A progress bar is displayed 8 At completion of the update process click Ok to confirm Charge your iPod iPhone iPad with the standalone dock You can charge your iPod iPhone iPad through the supplied standalone docking charger Compatible iPod iPhone iPad The docking charger supports the following IPod iPhone and iPad models e Place the iPod iPhone iPad in the docking Made for charger iPad 2 e The docked iPod iPhone iPad begins to e iPad charge as
19. soon as the docking charger Is e iPhone 4 connected to AC power e iPhone 3GS s ioe To remove the iPod iPhone iPad s iPhone e Pull the iPod iPhone iPad out of the ee docking charger e IPod 5G e iPod 4G e iPod nano st 2nd 3rd 4th Sth and 6th generation e iPod touch 1st 2nd 3rd and 4th generation e IPod mini EN 21 6 Product information Note e Product information is subject to change without prior notice Specifications Amplifier Rated Output Power 2X50 W RMS Frequency Response 20 20000 Hz 3dB Signal to Noise Ratio gt 90 dB Aux Input MP3 link 1 V RMS 20 kohm Speakers Speaker Impedance 8 ohm Speaker Driver 130 mm woofer 19 mm tweeter Sensitivity gt 85 dB m W 22 EN General information AC power Operation Power Consumption Eco Standby Power Consumption Dimensions Main Unit Weight With Packing Main Unit Wifi SoundSphere speakers 100 240V 50 60Hz Standalone docking charger Model ASSA28 050200 Input 100 240V 50 60Hz 0 45A Output 5 0V 2000mA 22 W lt 05 W 265 in diameter x 410 mm 14 5 kg 12 kg Troubleshooting Warning e Never remove the casing of this apparatus To keep the warranty valid never try to repair the system yourself If you encounter problems when using this apparatus check the following points before requesting service If the problem remains unsolved go to the Philips web site www p
Download Pdf Manuals
Related Search