TFA 98.1009
Contents
1. keys SNOOZE AL HR MODE MIN xt BRIGHTNESS key DIRECTION key Activate or deactivate snooze function Alarm snooze function Activate the projection brightness at the highest level Exit the setting modes Back light On Enter alarm setting mode Activate or deactivate alarm Stop alarm and snooze function Set the hours and day Back light On Enter manual time setting mode Toggle between indoor temperature seconds alarm time and date display Enter time zone setting mode Set the minutes weekday and month Stop alarm and snooze function Back light On Set the brightness level of the projection in A C power mode 4 levels High Medium Low OFF Back light On Project the image direction can display 4 different orientations Back light On HOW TO USE THE PROJECTOR The projector projects the current time onto a wall or ceiling preferably within a darkened room It can be adjusted forwards and backwards 180 for maximum projection range The projection image can also be adjusted to 4 upright positions each with a rotation of 90 To project the time onto a flat surface ils Point the projection lens in the appropriate direction max distance of the projection is 2 meters 2 Adjust the intensity of the projector light with the key 3 Adjust the projection image in an upright position with the a key Note The projector will only project the current time It will not project the seconds date or t2. R amp TTE Directive 1999 5 EC To be used in EC Member and EFTA States Summary of the Declaration of Conformity We hereby declare that this wireless transmission device does comply with the essential requirements of R amp TTE Directive 1999 5 EC 4 Press the SNOOZE key again to enter the weekday setting flashing 5 Use the MODE MIN key to set the weekday 6 Press the SNOOZE key once more to confirm all settings and to exit or do not touch any buttons for around 8 seconds The mode will return to normal TIME ZONE SETTING 9 Time zone 0 Central Europe To change to a different time zone 9 hours 1 In normal mode display press and hold down the MODE MIN key to enter the time setting mode 2 Use the MODE MIN key again to select the desired time zone Each press changes the digits by 1 hour 3 When the desired time zone is selected press the SNOOZE key to confirm and exit or wait for about 8 seconds for automatic return to the normal mode display Peete Note If the time zone is changed to another time zone other than 0 the calendar will not be displayed BACK LIGHT The LED back light is automatically switched ON when any keys are pressed The back light will be switched on for approximately 2 seconds before automatically switching OFF However if any of the keys are pressed and held down then LED back light will remain ON constantly unit the key is released BATTERY CHANGE It is recommended to replace
3. To install the adapter Important Make sure that your household voltage is 230V Otherwise your Projection clock may be damaged 1 Connect the power adapter to a wall socket 2 Insert the adapter into the jack at the bottom of the clock 3 The Projection clock will now start receiving the DCF time signal After approximate 3 to 5 minutes the DCF time will be displayed 4 If reception is not successful within approximately 7 10 minutes the Projection clock will attempt to receive the signal in the following hour Your Projection clock is now operational Note If the Projection clock is powered through the adapter the projection will be constantly ON at the highest brightness level unless the brightness level is manually changed to a lower brightness level afterwards And the brightness of the projection can be change accordingly to enhance the clarity of the projected time by pressing the key If the Projection clock is battery operated the projection will be ON at the highest brightness level only when the SNOOZE key is pressed The intensity of the brightness level of the projection cannot be changed If the SNOOZE is released the projection will be turned OFF Important If the DCF 77 signal is not being received no keys functions can be used In that case either wait for the next reception of the DCF signal or proceed to manual time setting after reset of the clock for activation o
4. emperature information RADIO CONTROLLED TIME The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in every one million years The time is coded and transmitted from Mainflingen near Frankfurt via frequency signal DCF 77 77 5 khz and has a transmitting range of approximately 1 500 km The Projection clock receives this signal and converts it to show the precise time and so when within this range the received time is completely accurate CHECKING FOR DCF 77 RECEPTION The Projection clock will automatically start scanning for the DCF 77 frequency signal after the battery is inserted In normal surroundings for example away from interfering sources such as TV sets it takes between 3 5 minutes to receive the signal If after 10 minutes after having inserted the batteries into the alarm clock and the DCF 77 signal is not received then check the following list before manually setting the time see Manual time setting Your Projection clock is now operational Note If the batteries are used as the main power source 1 Projected image brightness alarm volume and back light strength would be weaker 2 Battery life time would be much less than 1 year TO USE THE PROJECTOR POWER ADAPTER The unit comes with an adapter unit for using the projector for an extended period of time such as throughout the night
5. ess and projection orientation possible Direction key Battery cover er socket Calendar display weekday date month Alarm setting with snooze function Time zone 9 hours Indoor temperature display in degree Celsius LED back light SETTING UP The Projection clock can be batteries operated or powered by the provided AC DC adapter BATTERIES INSTALLATION Battery cover Battery compartment Open the battery cover at the back of the Projection clock as indicated above 2 Checking the correct polarization insert 2 x AA IEC LR6 1 5V Alkaline batteries into the battery compartment and replace the cover 3 When the batteries are inserted all the segments of the LCD will light up briefly and a beep will sound The Projection clock will now start receiving the DCF time signal After approximate 3 to 5 minutes the DCF time will be displayed 4 If reception is not successful within approximately 7 10 minutes the Projection clock will attempt to receive the signal in the next following hour
6. f the keys function BATTERIES POWERED WITH THE USE OF AC DC ADAPTER If the Projection clock is first powered by batteries and the power adapter is subsequently used for extended period of time the main power source of the Projection clock will switch to AC DC power The batteries will then act as a backup power source in case of power failure TO RESET THE PROJECTION CLOCK To reset the Projection clock to the factory default setting or in case of a malfunction please remove all batteries from the unit and unplug the AC DC adapter from any power source Wait at least for 3 minutes before powering up the Projection clock again RADIO CONTROLLED PROJECTION CLOCK WITH DIGITAL THERMOMETER INTRODUCTION Instructions manual Congratulations on purchasing this Projection clock with DCF 77 radio controlled time The operation of this product is simple and straightforward and by reading this operating manual users will receive the optimum benefits of all its features Brightness key FEATURES e DCF 77 Radio controlled time with manual setting option SNOOZE key Adjustable projector Projector lens i meer TN 234 WSA LL N N ROJECTION now e fe fess SX ue Ri Va o o L_J AL HR key MODE MIN key Adap e 24 hours time display hour minutes seconds e Time projection hour and minute e Projection with adjustable brightn
7. meters away from interfering sources such as computer monitors or TV sets 2 Avoid placing the alarm clock onto or in the immediate proximity of metal doors windows frames or structures 3 Within thick concrete rooms such as basements and tower blocks the DCF 77 signal is naturally weaker In extreme cases place the alarm clock closer to a window and or point its front or rear towards the general direction of the Frankfurt Main transmitter avoid positioning within close proximity of metal frames or structures Note Users may be located in areas where atmospheric disturbances are the direct cause for not receiving the DCF 77 frequency signal During nighttime atmospheric disturbances are usually less severe and reception is possible in most cases With a single daily reception it is adequate for the alarm clock to keep time deviation to below 0 5 seconds in a period of 24 hours When the clock is trying to receive the DCF signal the reception icon will flash on the LCD Once the signal is locked the DCF 77 tower icon will stay fixed on LCD and the received time will automatically correct the manually set time As well as the time the date will also be received by the Projection clock and will be displayed accordingly in the calendar section of the LCD epee REEN eSY4AL Alarm time Alarm ON icon Alarm icon To set alarm 1 Press and hold the AL HR key the icon will appears and the AL icon on the LCD
8. starts flashing 2 Set the hours and minutes of the desired alarm time by use of the AL HR hours or the MODE MIN minutes keys respectively 3 Once the alarm time is set press the SNOOZE key to confirm and exit or wait approximately 8 seconds for automatic timeout TO ACTIVATE DEACTIVATE THE ALARM Press the AL HR key The alarm icon will appear disappear indicating that it is ON or OFF Note the maximum duration of the alarm ringing is 1 minute 36 seconds SNOOZE SETTING The snooze time is set as default for 5 minutes by the manufacturer The snooze mode will be activated from the start of next minute after the SNOOZE key was pressed it does not count the current minute that it was pressed in To use the snooze feature simply press the SNOOZE key when the alarm is sounding and the alarm will snooze for 5 minutes before automatically sounding again When the alarm is snoozing the alarm icon will start flashing indicating that the alarm is active but is in Snooze mode To stop the snooze function when it is in snooze period press and hold the SNOOZE key until a Beep is sounded You can also press the AL HR key or the MODE MIN key once to stop the snooze function LCD SCREEN The Projection clock can display information of date indoor temperature seconds and alarm time on the LCD only The projection will only display the time FUNCTION KEYS The radio controlled Projection clock uses the following
9. the batteries in the unit on an annual basis Please help in the preservation of the environment Return used batteries to an authorised depot SPECIFICATIONS Recommended operating temperatures 0 C to 49 C with 0 1 C resolution Power source Batteries 2 x AA IEC LR6 1 5V Battery life Approximately 12 months Alkaline battery recommended Or AC power INPUT 230VAC 50HZ use the provided AC DC adapter only Projection distance Dimensions L x W x H max 2 meters 123 x 42 x 91mm MAINTENANCE Avoid placing the alarm clock in areas prone to vibration and shock as this may damage and inaccurate readings Avoid exposure to sudden changes in temperature such as direct sunlight extreme cold and wet or moist conditions When cleaning the display and casing only use a soft damp cloth Do not use solvents or souring agents as they may mark the LCD and casing Do not submerge the alarm clock in water Do not attempt to make any repairs to the alarm clock Return it to its original point of purchase for repair by a qualified engineer Opening and tampering with the unit may invalidate its guarantee The clock LCD can alternate between the 4 display modes when pressing and the MODE MIN key 1234 DCF 77 Tower icon DATE e 5 534 2 34 TEMPERATURE o o S a253 OC Celsius Q a i2 34 SEC S amp Seconds display 2 34 234A Alarm time display MANUAL TIME SETTING Hours Setting Minutes Se
10. tting flashing flashing eee In some cases after inserting the batteries the Projection clock may not be able to receive the DCF 77signal this situation the time should be manually set before manual setting see Checking DCF 77 Reception above T Press and hold the MODE MIN key firmly while inserting the batteries until the time digits start flashing 2 Set the time by using the AL HR and the MODE MIN keys respectively 3 Press the SNOOZE key to enter the Calendar setting mode or wait for about 8 seconds for automatic timeout Note The Projection clock will still try and receive the signal despite the time being manually set When it receives the signal then the DCF tower icon will stay fixed on the LCD If reception has been unsuccessful then the DCF tower icon will disappear but reception will still be attempted the following hour CALENDAR SETTING The date default of the Projection Alarm clock is MO 1 1 in the year 2000 Once the radio controlled time signals are received the date is automatically updated However if the signals are not received you can adjust the date manually To do this T The year digits start flashing Use the MODE MIN key to set the year the range runs from 2000 to 2029 2 Press the SNOOZE key again to enter the month and date setting flashing 3 Use the AL HR key to set the day and the MODE MIN key to set the month n The distance of the Projection clock should be at least 1 5 2 0
Download Pdf Manuals
Related Search