SCOTT DX 577
Contents
1. gt GD d D o IMPORTANT SAFETY INSTRUCTIONS CAUTION Read and observe all warnings and instructions in this user guide and those marked on your unit Retain this guide for future reference This unit has been designed and manufactured in a way that ensures your personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this unit will protect you if you observe the following procedures for installation use and servicing This unit does not contain any parts that can be repaired by the user Do not remove the casing or you may be exposed to dangerous voltage Refer servicing to qualified service personnel only e Read all safety and operating instructions before operating your unit e Keep safety operation and use instructions for future reference Heed all warnings on your unit and in the operating instructions e All operation instructions should be followed e Do not use this unit near water For example do not use this unit near a bathtub washbowl kitchen sink laundry tub in a wet basement near a swimming pool or other areas located near water e Clean only with a dry cloth Unplug this unit from the wall outlet before cleaning Do not use liquid cleaners e Install in accordance with these instructions Do not block the ventilation slots and openings in the unit in order to ensure ventilation and reliable operation of your2. e SAFETY CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING SHOCK HAZARD DO NOT OPEN The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance To prevent direct exposure to the laser beam do not try to open the enclosure WARNINGS To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture DO NOT REMOVE COVER or OPEN CASING Dangerous high voltages are present inside the enclosure Do not open the casing Refer servicing to qualified personnel only Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure LASER CLASS 1 Type Dual semiconductor laser GaAlAs Wavelength 650nm and 780nm LASER PRODUCT Output Power 7mW Beam Divergence 60 degrees INVISIBLE LASER RADIATION WHEN OPEN OR INTERLOCK FAILED OR DEFEATED WARNINGS DO NOT STARE INTO BEAM Avoid direct exposure to laser beam To prevent direct exposure to laser beam do not try to open the enclosure GB 1
3. and bottom of the screen Pan Scan When a wide screen video is played this mode clips the right and left sides of the image so that it can be viewed on a normal screen GB 6 TV System You can select one of the following systems PAL NTSC and AUTO Select the system that matches your TV Video Out Select one of the following video output sources S VIDEO Component YUV YCbCr P Scan YPbPr or RGB Audio menu Digital Output OFF Select this option when no digital output is used PCM Dolby Digital and MPEG 2 multi channel signals are converted to PCM Pulse Code Modulation This setting is suitable for amplifiers or receivers without digital multi channel sound decoders RAW Dolby Digital signals are unaltered Generally this setting is used with a digital 5 1 channel receiver Night Mode Off Disable the function On Select this when using the unit at night Down Sampling On Select this option if your connected system is not able to support the sampling frequency of 96 kHz so that the unit can convert it to 48 kHz Off Select this to disable the down sampling function RATING menu The Rating menu allows you adjust the Parental Control Parental control 8 Adult options ie Set Password You can change the password to prevent children from EXIT 0 Audio accessing the Parental Control settings Select Set Password press ENTER and input the default password
4. different subtitle languages have been recorded The number of languages recorded may be different depending on the disc ADVANCED PLAYBACK FUNCTIONS 1 DISPLAY function While the disc is playing press DISPLAY to display playback information available depending on the disc 2 GOTO function This function allows you to select any point on the disc and to start playback from this point Selecting a Specific title chapter time for DVD or track time for CD VCD You can select any specific title chapter track time and start playback from this point by directly selecting it Press GOTO Press A or Y to highlight the title chapter track time field and press the corresponding number key 0 9 o Press ENTER to confirm The unit will then start playback from the selected position Note Press CLEAR to cancel a selection Some discs may not allow use of this function Some scenes may not be located as precisely as specified This method for accessing a specific location is available only within the current title of the DVD disc or current track of the CD For VCDs this function only works if PBC is off Press CLEAR to delete any mistakes 3 Programming playback The contents of the disc can be played in a selected order Press the PROG button Note During VCD SVCD playback this function is only available when PBC is OFF 3 1 DVD Programming Hop Use the 4 A4 or Y button to highlight the title field and press IDA AULA
5. play discs from zone 2 This indication is marked on the DVD disc label PAL NTSC Composite video 1 0 Vp p 75 Ohm Analog audio out 2 OV RMS 10K Ohm 20Hz 20KHz 3dB Audio video composite output x 1 SCART output x 1 S VIDEO output x 1 Y Pb Cb Pr Cr component video output x 1 Digital coaxial output x 1 Digital optical output x 1 Port type 2 0 Maximum capacity 8 GB 360 L X 220 W X 38 H mm Approx 1 9 Kg Note Due to continuing improvements these technical specifications are subject to change without notice waste electrical products should not be disposed of with household waste Please recycle K If at any time in the future you should need to dispose of this product please note that where facilities exist Check with your local authority or retailer for recycling advice Waste EE Electrical and Electronic Equipment Directive GB 13
6. 28 the number button to enter Use the gt button to highlight the chapter field and press the number button to enter E Repeat the above step for the next titles chapters ES clear Program Proa Highlight B PLAY on the screen and press ENTER to start the EE programmed playback 3 2 CD VCD SVCD Programming Refer to the previous section to program the tracks of your choice GB 9 3 3 Clear the Programs Highlight the program and press the CLEAR button to delete the contents of the program one by one Note Highlight CLEAR Program on the PROG screen and press ENTER to delete all programs 4 Repeat playback A specific title chapter or track can be played repeatedly Note During VCD SVCD playback repeat playback is only available when PBC is OFF 4 1 Repeating a Title Chapter Track All disc Press the REPEAT button For DVDs Off gt Repeat Chapter gt Repeat Title For CD VCD SVCD Disc Off gt Repeat single gt Repeat all For MP3 JPEG WMA files Repeat Off gt Repeat single gt Repeat Folder 4 2 Repeating a Specific Section A B repeat playback allows a specific section to be repeated While the disc is playing press the A B button to set the beginning of the section point A to be played repeatedly Press the A B button again to set the end of the section point B to be played repeatedly The unit will then immediately begin replaying the selection A to B repeatedly Press the A B button a
7. 6 7 8 Power cord L Left audio output Component video output Y Pb Cb Pr Cr Composite VIDEO output R Right audio output Digital COAXIAL output S VIDEO output Digital OPTICAL output SCART output GB 3 CONNECTIONS Connecting to a TV The way in which the unit is connected and the kinds of cables used can make a noticeable difference in picture and sound quality Before selecting one of the options please make sure that any other equipment has the required input output connections Use any of the options below Different options for connecting your DVD player to a TV Video mode Cable Picture Press the VIDEO OUT Outputs quality Sable UNO button on the remote SCART SCART cable Composite VIDEO ouput Normal L R Left Right audio yellow white red outputs S VIDEO output S VIDEO cable L R Left Right audio Good A V cable white No S VIDEO outputs red Y Pb Cb Pr Cr component video Component video Component YUV INTERLACE YCbCr Very R output audio cable white LIR Left Right audio 90 red P SCAN YPbPr for a TV outputs with progressive scan Connecting to amplifier You can connect an amplifier to your DVD player in several different ways Different options for connecting to an amplifier gt Cable supplied e Digital coaxial output COAXIAL Very good Coaxial audio cable No Digital optical
8. 8888 Then press ENTER again to input the new password Press ENTER to confirm the new password Select the rating Select Parental Control press ENTER and input the password Press ENTER again to confirm and then press ENTER again to switch to the rating level selection mode Select a level and press ENTER to confirm If you forget the password you can always use the default password 8888 Misc menu Use default setting The Default Setting resets the personal settings saved in the DVD setup menu to the factory default Screen saver Off Disable the function On Enable the screen saver function PLAYING DVD CD VCD DISCS 1 amp Open Close e Press to open the disc tray Note Load the disc on the disc tray with disc label facing upwards e Press this button again to close the disc tray The unit will start playback automatically 2 bil PLAY PAUSE GB 7 e Press to start playback Press this button again to pause playback 3 I gt STEP Frame by Frame Advance The image can be advanced frame by frame e For DVD VCD playback press IIbSTEP to advance frame by frame in STEP mode Press Pil PLAY PAUSE to resume normal playback 4 SLOW Press the SLOW button to start forward backward slow motion play in the following sequence 1 2 1 4 1 6 1 8 Press the Mil PLAY PAUSE button to resume normal playback Note Slow motion is not applicable to CD playbac
9. ce and press P to select Edit mode 2 Press lt and ENTER to select music you d like to cancel and ENTER to confirm your operation 3 Press to select Clear program and press ENTER to cancel the program 4 Press A to select Browse view and return to play in order Note Selection menu is also available for CD MUSIC MP3 WMA files The unit will play the MP3 WMA file currently selected It will then play all the files in the sub folders contained within the current folder After that the unit will play the remaining folders on the disc PICTURE JPEG files Press PIIPLAY PAUSE and the unit will start the slideshow from the JPEG file currently selected Then you can zoom in on or rotate the displayed pictures You can also select a folder and display all the files in that folder Select the folder of your choice and press the MIPLAY PAUSE button To select a different refresh mode press the ANGLE button repeatedly MOVIE MPEG 4 files The unit will read the file currently selected AUDIO CD RIPPING ENCODING IN MP3 FORMAT With this player you can convert your audio CDs to MP3 format and save the files on a USB device Ripping During CD music playback use the A V lt or gt buttons fi TRACK 01 to choose Ripping and then press ENTER to enter the A TRACK 02 Ripping menu Insert a USB device f TRACK 03 PP g f TRACK 04 Available Space ff TRACK 05 0 MB Destination Select the USB device as th
10. e A Y lt and gt arrow buttons to adjust the setting Press the ENTER button to confirm the setting E Rating E Misc Language menu The language menu allows you to select the languages for the OSD DVD menu subtitles and audio The following options are available OSD Language To select the on screen display language Subtitle To select the subtitle language Audio To select the audio language DVD menu To select the disc menu language Video menu The video menu allows you to setup the display and video output options You can set up the following options Aspect Ratio Choose the aspect ratio 4 3 or 16 9 4 3PS Select this format to display 4 3 images without distorting the picture In this case black bands will appear on left and right of the screen 4 3LB Select this format when the unit is connected to a 4 3 TV Wide screen images are shown on the screen with black bands on the top and bottom 16 9 Select this format to play wide screen videos in full screen mode View mode Select one of the following display modes Fill Original Auto Fit Pan scan Fill Select for playing wide screen videos on a wide screen Original Select original to display the pictures or videos in their original resolution Black bands may appear at the right left top and bottom of the screen Auto Fit Select this mode to display wide screen videos on a conventional screen Black bands will appear at the top
11. e source of fi TRACK 06 Size of Selected OMB storage Select all Select all the files Note You can select any desired files using the A lt or gt buttons and press the ENTER button to confirm Unselect all Unselect all the files Rip quality Select the ripping quality Normal High Best Ripping start Start ripping During ripping you can select CANCEL to stop GB 11 TROUBLESHOOTING GUIDE If it appears that the unit is faulty first consult this checklist It may be that something simple has been overlooked Note Under no circumstances should you try to repair the unit yourself as this will void the warranty Only qualified service personnel should remove the cover or service this unit NO POWER Check that the player is switched on Check if the power cord is properly connected NO PICTURE Check if the TV is switched on Check if the correct AV input is selected on the TV refer to the TV manual for more details Check the video connection between the player and TV BAD QUALITY PICTURE Check the disc for fingerprints and clean with soft cloth wiping from the center to the edge A small amount of picture distortion may sometimes appear this is not a malfunction Check if the disc format is compatible with the TV PAL NTSC BLACK AND WHITE PICTURE Check if the disc format is compatible with the TV PAL NTSC Check that the DVD player is
12. e starts to reduce e If the remote control is not to be used for a long time remove the batteries to avoid damage caused by battery leakage Precautions when using batteries 1 Use only the size and type of batteries specified 2 Ensure that you follow the correct polarities marked in the battery compartment when installing the batteries Reversed batteries may damage the remote control 3 Exhausted batteries must be removed to prevent possible battery leakage 4 Dispose of batteries properly according to environmental regulations Inserting a disc 1 Press the 4 OPEN CLOSE button on the remote or the button on the front panel to open the disc tray GB 5 oe gt GD 2 Insert a disc press the 4 OPEN CLOSE button on the front panel or the button on the remote control to close the disc tray The unit will read the disc and start to play it or it will display a start menu Inserting a USB device Insert a USB device into the unit In stop mode or when there is no disc press the USB button on the remote control and use the A V buttons to select the source DISC or USB Press the ENTER button to confirm BASIC SETUP pe Setup Menu lt gt Language OSD language English The Setup menu allows you to configure the language y Subtitle English video audio and general settings of the player Press the El Video aoe English SETUP button to access the setup menu Ana me penake Use th
13. gain to clear the programmed repeat playback and return to normal playback Note The A B repeat function can only be used within the same title or track If points A and B are defined in different titles or tracks A B repeat is cancelled 5 VCD SVCD playback control While a VCD SVCD is playing press PBC repeatedly to switch PBC Playback Control on or off 5 If PBC OFF is selected use the l l buttons or the number keys 0 9 to select an option PLAYING MP3 JPEG WMA MPEG 4 FILES 1 Pil PLAY PAUSE Press to start playback Press it again to pause playback 2 bdh Skip Press to skip to the next previous track or picture 3 m Stop Press to stop playback and display the selection menu JPEG and movie files Note Press PI PLAY PAUSE to play from the beginning 4 ZOOM Press to zoom into the picture when playing JPEG or MPEG4 files 5 Flipping and rotating a still picture JPEG Press the navigation keys A Y 4 to rotate a still picture Selection Menu Program 1 Press STOP to display the Filter menu 2 Press gt A orV to select Edit Mode and press the ENTER button 3 Then press to select the file you want and press ENTER 4 Press gt to select Add to Program and press ENTER GB 10 then A to select Program View and press ENTER 5 Then press lt to select the file of your choice and press ENTER then press Pll to play the file Cancel program 1 Press STOP twi
14. k 5 lt lt gt gt forward backward search Press the buttons to perform a fast forward or backward search Press the ENTER button to resume normal playback Each time these buttons are pressed the playback speed will be adjusted in the following sequence x2 x4 x8 x16 Press the PI PLAY PAUSE button to resume normal playback 6 dd Skip Forward Backward When a disc is playing you can skip backward forward to the next track or chapter e Press the bhl button to skip to the beginning of the previous chapter or track e Press the Il button to skip to the beginning of the next chapter or track For audio CD discs use the number buttons 0 9 on the remote control only to directly jump to a track number 7 Stop e Press m once to stop the current playback instantly and enter the Resume Play mode Press Pil PLAY PAUSE to resume playback from the point where the disc was stopped e Press m twice to stop playback completely It is now impossible to resume playback from the place where playback was stopped Press Pl PLAY PAUSE again to start playback from the beginning En of the disc 8 MENU e Press to display the disc menu Notes This button has no function during playback of an audio CD or VCD 9 TITLE e Press to display the DVD title menu the availability of this function depends on the disc 10 ZOOM The picture size can be magnified during playback e When a disc is playing press the ZOOM butt
15. not connected through the VCR PICTURE INTERFERENCE Relocate the unit further away from possible sources of interference or emission e g radio power amplifier radiator etc THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL Aim the remote control directly at the sensor on the front of the player Avoid all obstacles which may interfere with the transmission path Inspect and or replace the batteries NO SOUND Check audio connections If using a Hi Fi amplifier try another sound source Clean the disc Check if the disc is defective by trying another disc NO AUDIO FROM DIGITAL OUTPUT Check the digital connections Check the audio setup menu to make sure that the digital output is correctly set Check if the audio format selected is compatible with the player DISC CANNOT BE PLAYED Ensure disc is placed properly into the disc tray IMPROPER FUNCTIONING The normal function of the product may be disturbed by external interference Just reset the product by disconnecting and reconnecting the power cord GB 12 Power supply Power consumption Discs and files supported TV system Video out Audio out Frequency response Output terminals USB port Dimensions Weight full package TECHNICAL SPECIFICATIONS AC 230V 50 Hz 9 W DVD Video DVD R RW DVD R RW CD DA CD R RW MP3 JPEG VCD2 0 MPEG 4 Xvid avi The zone this player can
16. on Each time the ZOOM button is pressed the ZOOM settings will be changed as follows Q1 gt Q2 gt Q3 gt QOFF While an image is magnified use the A Y and gt keys to pan the image for viewing e To return to the normal view press the ZOOM key until the message QOFF is shown The screen will return to normal 11 ANGLE ANGLE change the viewing angle on a DVD Different viewing angles can be selected when playing a DVD video disc that contains scenes recorded from multiple angles e Press ANGLE repeatedly to select different viewing angles if available on the disc 12 AUDIO select the audio languages available on the disc GB 8 During DVD playback different audio languages can be selected e When a disc is playing press AUDIO to show the current audio language e Press repeatedly to select the desired audio language Note e For VCD playback the audio output Left Right Mix Stereo can be selected using the L R button There will be no sound output when DTS audio format is selected if a DTS disc is playing 13 SUBTITLE To select one of the subtitle languages available on the disc During playback you can change the subtitle language or disable the subtitles function e While a disc is playing press SUBTITLE to show the current subtitle playback language e Press repeatedly to select the desired subtitle language Notes e This function can only be used for discs on which
17. original part Unauthorized substitutions may result in fire electric shock or other hazards GB 2 CONTENTS SAFE TY AAA E a ce tence ee de eta carats 1 IMPORTANT SAFETY INSTRUCTIONS suicida Gann a dachans EES 2 CONTENTS erior si A 3 A E een eee eee a cere 3 FRONT AND BACK PANEL ii obo 3 CONNECTIONS cussirtiasrsni mac ices Re pertain A AAA 4 REMOTE CONTROL sisi nueina arria atole citada ate ritos 4 GETTING STARTED amp BASIC SETUP ua 5 PLAYING DVD 7 CD VCD DISCS casada ss E ADVANCED PLAYBACK FUNCTION Lscciciionoraia aiii Ennn EEEn nnn 9 PLAYING MP3 JPEG WMA MPEG 4 FILES canas 10 AUDIO CD RIPPING ENCODING IN MP3 FORMA Docoocooccoocococccconoonnccccnonnoncccnccananoconnnconnncccnnnnnnnncn 11 TROUBLESHOOTING piece sate ala teeter hie nec i baaada Ea ai ereire 12 TECHNICAL SPECIFICATIONS pninenuruncienangane ora a ss 13 PACKAGE DVD player A V cable Remote control Instruction manual FRONT AND BACK PANEL Front panel Acoso POWER button Disc tray LED display Infrared IR remote control sensor OPEN CLOSE 4 button PLAY PAUSE PH button STOP m button USB port 1 2 3 4 5 6 7 8 Back panel 1 2 3 4 5 6 7 8 9 a 3 E y OTK COAXIAL S viES OPTICAL 25
18. output OPTICAL Very good Optical cable No REMOTE CONTROL OSTANDBY AUDIO 0 9 10 number keys CLEAR SETUP lt gt A Navigation lt lt gt gt REV FWD REVERSE FORWARD STEP m STOP 10 VOL 11 L R Left Right ON OA WN gt GB 4 12 N P NTSC PAL AUTO 13 SLOW STANDBY OPEN CLOSE 14 VIDEO OUT Video mode 1 15 PROG PROGRAM 27 16 OPEN CLOSE 18 17 GOTO 18 SUBTITLE ae 19 MENU 13 20 TITLE 2 21 DISPLAY 5 22 ENTER 6 23 P PREV NEXT 24 Pil PLAY PAUSE 20 25 A B Repeat Ls 26 REPEAT 27 MUTE E 28 ANGLE oe 29 PBC playback control for VCD 8 30 RETURN 14 31 ZOOM L 32 SHUFFLE a 33 RESUME a 34 USB GETTING STARTED amp BASIC SETUP GETTING STARTED Power supply for the unit 1 Carry out the connections for the unit as shown in CONNECTIONS 2 Insert 2 AAA batteries supplied into the battery compartment in the remote control taking care to follow the correct polarities 3 Connect the power cord to an AC mains outlet Press the POWER button to turn on the unit 4 Turn on the TV and set to the correct video in source 5 To go to standby mode press the OSTANDBY button on the remote control If the unit is not to be used for a long time please disconnect the power cord Notes e The effective distance for remote control operation is about 5 meters Replace the batteries when the remote control operating distanc
19. unit This will also prevent the unit from over heating e Do not place unit on a bed sofa carpet or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless correct ventilation is provided or these instructions have been adhered to e Do not install near any heat sources such as radiators heat registers stoves or other electronic devices including amplifiers that produce heat e Prevent the power cord from being walked on or pinched particularly at plugs and connections e The power cord and mains plug should remain easily accessible e Use only attachments or accessories specified by the manufacturer e Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with this unit Exercise caution when moving the cart unit combination to avoid injury from tip over e Unplug this unit during lightning storms or when unused for long periods of time e Refer all servicing to qualified service personnel Servicing is required when your unit has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled into your unit or objects have fallen into it your unit has been exposed to rain or moisture it does not operate normally or it has been dropped e When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or have the same characteristics as the
Download Pdf Manuals
Related Search