Home

EVS410 User`s Manual

image

Contents

1. Select a Web content zone to specify its security settings Settings 164 Actives controls and plug ins E Automatic prompting for Actives controls Local intranet Trusted sites Restricted Q Disable sites 9 Enable Fe E Binary and script behaviors 2 This zone contains all Web sites you Citas Administrator approved haven t placed in other zones J Disable Enable security level for this zone E Download signed Activex controls Disable ed 1 Enable ustom settings To change the settings click Custom Level S Prompt To use the recommended settings click Default Level 9 Download unsigned Activex controls at mili Reset custom settings Step 2 Enter the IP address or host name of the device in the Location Address field of your Internet Explorer browser in the form http nn nn nn nn port or http ddnsname everfocusddns com Please refer to EVS410 Installation Guide for how to find the IP address by using the IP Finder Step 3 At the login popup window enter User Name and Password Default User name is user1 and default password is 11111111 Connect to 192 168 12 93 User name Password Remember my password f EverFocus EVS410 Step 4 Click OK button Step 5 You might be required to download Active X files which are required to process video Please click Install Que E x El A po Search LE Favorkes E Address 8 hip 1190 168 1
2. 3 A directory of all saved data will be displayed You are now ready to obtain images from SD card Note It is impossible to access the SD memory card in the process of formatting All data saved on the SD memory card will be deleted when the SD memory card is formatted Do not turn the power of the video encoder off in the process of formatting 53 13 EverFocus EVS410 5 8 4 Serial Communication IJ EverFocus Date Time Daylight Saving SD Card Serial Communication Maintenance RS485 Settings Baud Rate Data Bit 8 Stop Bit Parity RS485 Settings Baud Rate This field is to set the speed at which is used to transmit instruction or information through the RS485 port on the video encoder There are six different speeds 2400 4800 9600 19200 38400 57600 Default 9600 Data Bit This field is the data bit at which you will be transferring There are two settings for this option 8 or 7 Default 8 Stop Bit This field is to set the stop bit for the RS485 connection There are two different stop bits 1 or 2 Default 1 Parity This field is to select the parity level at which you will be connected You can choose between None Odd or Even parity levels Default none Press Apply to apply the setting changes or Reset to reset without saving the change 54 A EverFocus ESO 5 8 5 Maintenance IJ EverFocus Date Time Daylight Saving SDCard
3. Serial Communication Maintenance Maintenance Server Reboot the IP device Resets all parameters except for the IP time zone and daylight saving parameters to the original factory settings Resets all parameters to the original factory settings Save Load Configuration Server Save all configuration to a config file Use a saved config file to return the unit to a previous configuration Upgrade Firmware Upgrade the EVS410 with the latest firmware Note Do not disconnect power to the unit during upgrade The unit will reboot automatically after the upgrade has completed 1 5 minutes e Maintenance Server Reboot The unit is rebooted without changing any of the settings Use this method by pressing button if the unit is not behaving as expected Restore The unit is restarted and most current settings are reset to the factory default values by pressing button The only settings saved are e IP setting e DDNS setting Default The button should be used with caution Pressing this button will return all of the video encoder s settings including the IP address to the factory default values The video encoder will then have to be re installed Save Load Configuration Server To take a backup of all of the settings in the current configurations press Save to save the configurations to a config file Once saved it is then possible to return to the previous settings if when desired To return
4. press this key on KEB200 to switch auto tracking on off Toggle Fullscreen When the action of a key is set Toggle Fullscreen press this key on KEB200 to switch screen to current size fullscreen Select Tracking Object When the action of a key 1s set Select Tracking Object user can set select tracking object firstly press this key on KEB200 An icon will display on the screen Use joystick to select desired object and press this key again save the selected object 59 f9EverFocus EVS410 6 SPECIFICATIONS VIDEO STREAMING Video Compression H 264 M JPEG Video Resolution 704 480 576 640x480 352 240 288 320x240 176 112 144 Video Quality BR 5 level adjustable CBR 256Kbps 3Mbps rame Rate Up to 30fps 4 BNC composite 1 V p p 750 Mago Soules NTSC PAL auto sense G 711 PCM 8 kHz 1 Vrms 3 5mm phone jack Mono ompression Method 1 Vrms 3 5mm phone jack Mono peration Mode ETWORK Two way audio 10Base T 100Base TX auto negotiation RJ 45 socket Support MDI MDI X auto crossover function TCP IP UDP ICMP DHCP NTP DNS DDNS SMTP SNMP FTP HTTP HTTPs PPPoE Interface Supported Protocols ERMIANL I O Alarm Input Output 5485 EVENT MANAGEMENT UPnP Bonjour RTP RTSP RTCPUDP IGMP ICMPARP ONVIF PSIA errr Alarm input Manual trigger Motion detection Video loss Tampering detection and r Z O gt gt IO TI EE Q Q O O O gt S S P Event Trigger l Schedule
5. Log Tab f9EverFocus Information Log 1 System Log 001 2011 04 22 05 35 Video Loss CH 04 event number 4 002 2011 04 22 05 35 Device boots up 003 2011 04 22 05 33 27 Firmware update userl ffff 192 13 99 004 2011 04 21 07 39 Video Loss CH 04 event number 4 005 2011 04 21 07 39 17 Device boots up 006 2011 04 21 07 36 Firmware update userl fff 192 13 99 1907 2011 04 20 10 41 Video Loss CH 04 event number 4 1008 2011 04 20 06 52 Device boots up 1009 2011 04 20 06 51 Power loss 2011 04 20 06 47 Device boots up 2011 04 20 06 47 Power loss 2011 04 19 11 10 Device boots up 2011 04 19 11 10 Power loss 2011 04 19 10 59 Device boots up 2011 04 19 10 58 Power loss 2011 04 19 10 35 Device boots up 2011 04 19 10 34 27 Power loss 2011 04 19 10 25 17 Device boots up 2011 04 19 10 23 Power loss 2011 04 19 10 23 Device boots up 2011 04 19 10 23 Power loss 2011 04 19 10 09 Device boots up 2011 04 19 10 09 Power loss 2011 04 19 10 04 Device boots up onfig r E EA E amsa Ls El System Log Date Time displays date and time of the log event Log message all information and event message including login user s IP reboot firmware upgrade load factory default configuration reset and event detected System will keep the newest 256 records 18 f EverFocus EVS410 Press button to export the system log into a txt file and
6. Name Email Address Validity days Press Apply to apply the setting changes or Reset to reset without saving the change Created Request The properties of any certificate request currently resident in the video encorder or installed can be viewed by clicking the Properties button The pop up window shows an example of a certificate request 29 f EverFocus EVS410 http 192 168 13 194networkHttp Wizard htm Subject C TW ST asia L asia O everfocus OU everfocus CN everfocus Certificated PEM format BEGIN CERTIFICATE FE ME enke ee OE BQUAMICMMOswCQYD EKN TESMEAGR EC kg ER ea BAMTCWV2ZXJmb2N1 CZEjMCEGCSaGS5I ie ea ape lt b20wHheNMTEWNTAO MDM1MDA2WncNMTEvwNTEOMDM1MDA2WjCBjDELMAKGAIUE CVFcxDTALBGNVBAGT BGFzaNExDTALBgNVBACTBGFZzaNEXxEjAQ QBENVBAOTCWV2 ZK Jmb2NiczESMBAGAIUE CxMJIZXZ1cmZvY3VzMRIWEAYDVQQDEwl1dmVWyZm93dAXMxIzAhBgkankiG9w0BCQEW FRNSbHZpZUB1ldmVyZm9jdXMuY2 9LMIGfMAOGCSgGSIL3DQEBAQUAASGNADCBiQKB SQDFRUJOSPUbDESXWEEyxg5SrLorf7vitj APXiBsRtuGbIea926fJx2QorwuXFfOk u4JDESw8CwnX8bheytc83UJ3nomc9vbvLFdjSNEEXMri4odgKoGCjLJiidj1Ublr AUmQks nr9f4 zovTlnitFVx5ADxyNyryglCwqiaLX cwIDAQABo4HOMIHxMBOG A1UdDEQWBBTMYO04vrOmSc4Hf mlnhvSlrSL5SXbDCBWQYDVROjBIGSMIG2gBTMYO04V rOmSc4Hf 6mlnvSlrSLSXbKGBkq5BjzCBjDELMAKGAIUEBNMCVFcxDTALBGNVBAGT BGFzaWExDIALBoNVBAcTBGFzaWEXE J AQBGNVBAOTCWV2 ZXUmb2NiczESMBAGAIUE CxMJZXZicmZvY3VZMRIWEAYDVQQDEwlldmVyZm9j AXMxIzAnBgkgqnkiG9w0BCQEW FHNSbHZpZUBLdmVyZm9j dxXMuY2 9tggkAtm5Sw
7. R 22 S LD ASIS unan SEN ua 22 PPP Un 5 25 DMT E ns un TE 26 A 28 A EEE EE 31 5 3 6 Network Alarm reserved for PowerCon 33 NO 33 Sl VEU SA ch uuu 34 S j jillu S SSD EEEE re nr ne eres ree 36 JP MAS ds 38 o A EE II A 39 VER conoci cooraNa 40 MEN EN a ici 42 Iel EVE LI EE o O E EE A 43 2 Motion DECO EE ne ne ee ere 45 LAO a 46 NTN 47 0100 JE EE o EEE 48 SVT 49 TD AA ene 49 02 Da SAO ee eee eee ere ne een eee ree tre epee ss 51 DD EG A e E E E EAS 52 5 8 4 Serial COMMUNICATION cooccccnnnnnccccnnnnnnnoccnnnnnonocononononanoconnnnnnnronnnnnnnanononoss 54 MN 55 Ad EverFocus Jo 4 9 EKB200 a a 57 4 9 1 Action LISt a 57 BSP EC MTC TON Suso u u Su usss 60 A EverFocus su 1 INTRODUCTION EverFocus EVS410 Video Encoder can enable transmission of H 264 MJPEG video streams of four analog cameras The highly efficient H 264 video compression reduces bandwidth and storage requirements with superb video quality Moreover EVS410 offers built in four high performance 3D de noise and de interlacer engines to reduce noise artifacts increase S N ratio and covert videos from interlace to progressive EVS410 can deliver independent video streams from each channel at full frame rate in all resolution up to 4CIF Furthermore users can individually configure with di
8. UDP connection when occasions require time sensitive responses and the video quality is less important Note that each 19 ld EverFocus EVS410 client connecting to the server takes up additional bandwidth and the video encoder allows up to ten simultaneous accesses RTP over TCP This protocol guarantees the complete delivery of streaming data and thus provides better video quality The downside of this protocol is that its real time effect is not as good as that of the UDP protocol RTP over HTTP This protocol allows the same quality as TCP protocol without needing to open specific ports for streaming under some network environments Users inside a firewall can utilize this protocol to allow streaming data through Press Apply to apply the setting changes or Reset to reset without saving the changes Text Settings Check the box to enable display of the Machine name Channel Title Date Time or Frame Rate on the screen Foreground Color Select the foreground color of text to be displayed by moving the slide bar between Red Green and Blue until the desired color is obtained Position Select the position where the text will be displayed Upper Left Lower Right Lower Left Note For Quad view position of text will be fixed at Upper Left Press Apply to apply the setting changes or Reset to reset without saving the changes Date Time Format Used in Text Select Date Time Format from the following
9. a fixed Target bit rate that consumes a predictable amount of bandwidth As the bit rate would usually need to increase for increased image activity but in this case cannot the frame rate and image quality are affected negatively 34 f EverFocus EVS410 Variable Bit Rates Highest High Normal Low Lowest VBR adjusts the bit rate according to the image complexity using more bandwidth for increased activity in the image and less for lower activity Resolution Stream I 704 x 480 576 4CIF 640 x 480 VGA 352 x 240 288 CIF Stream 2 352 x 240 288 CIF 320 x 240 QVGA 176 x 112 144 QCIF Frame Rate select from NTSC 30 15 10 7 5 6 3 1 fps PAL 25 12 5 8 6 5 2 5 1 fps Note 1 Bandwidth utilization will be in proportion to the quality setting with highest quality requiring highest bandwidth 2 System performance may be influenced if user enables 2 video streams simultaneously Press Apply to apply the setting changes or Reset to reset without saving the change Video Recording Settings User can set video recording by selecting one of the enabled video stream This will allow users to view live images while also recording video from another video stream Channel 1 4 Select video recording stream from any enabled stream Selections are Stream 1 Stream 2 Video Stream Recording file will be saved as AVI or ARV select which file format is to be used Time Stamp Settings User can s
10. in the field Value Otherwise the value option will be disabled After completing setting press Apply to save the changes Then user can use these keys and joystick on EKB200 to control these actions Key No 13 to Key No 16 are system preset buttons also allowing user to do operations such as IRIS IRIS Focus Near and Focus Far Press Apply to apply the setting changes or Reset to reset without saving the change 57 fJEverFocus EVS410 Joystick IRIS IRIS FOCUS NEAR FOCUS FAR d 2 EKB200 Panel There are 20 available Action options including l Set Preset When the action of a key is set Set Preset use joystick to select a position and press this key on KEB200 to save the position as Preset Point Goto Preset When the action of a key is set Goto Preset press this key on KEB200 and the system will go the Preset Point Goto Home When the action of a key is set Goto Home press this key on KEB200 and the system will go the Preset position Clear Preset When the action of a key is set Clear Preset press this key on KEB200 to clear the Preset Point Focus Near When the action of a key is set Focus Near press this key on KEB200 to do focus near Focus Far When the action of a key is set Focus Far press this key on KEB200 to do focus far Iris Open When the action of a key is set Iris Open press this key on KEB200 to do Iris open Iris Close When
11. that has highest priority will be activated first Press Apply to apply the setting changes or Reset to reset without saving the change This example describes how to set the video encoder to upload images to an FTP site when someone press Manual trigger button Enter Event Name Event 1 Event Triggered by Manual Trigger Enable This Event JEnable Re trigger Enable Pre trigger Buffer Enable Post trigger Buffer Notification Over Log Trigger Alarm Output Alarm Output Duration Time 10 Second Send Mail Notification Upload ta FTP L Record to SD Card Record to PC LJ Network Alarm Click button in Event page Enter an event name for the event e g Event 1 Select Manual Trigger as event type Select Upload to FTP as action type Check Enable This Event Check Enable Pre Trigger Buffer and Enable Post Trigger Buffer Click to save this event in event list NRBR NO Pre Post Trigger Settings This function is used to be able to review what happened immediately before and after a trigger e g 5 seconds before or after a motion has been detected or after motion detection ceases 44 f EverFocus EVS410 Pre Trigger Buffer Image saved internally in the video encoder from the time immediately preceding the trigger Input the desired length of pre trigger buffer time It can be set up to 120 seconds Post Trigger Buffer Image saved int
12. the action of a key is set Iris Close press this key on KEB200 to do Iris close Run Autopan When the action of a key is set Autopan press this key on 58 A EverFocus 10 IT 12 13 14 15 16 17 18 19 20 KEB200 to start autopan Stop Autopan When the action of a key is set Stop Autopan press this key on KEB200 to stop autopan OSD Menu On When the action of a key is set OSD Menu On press this key on KEB200 to display OSD Menu on the screen OSD Menu Cancel When the action of a key is set OSD Menu Cancel press this key on KEB200 to hide OSD Menu on the screen OSD Menu Enter When the action of a key is set OSD Menu Enter press this key to enter the submenu of an option of OSD menu only if this option has a mark right next to it Tour Run When the action of a key is set Tour Run and the value of the key is set to a preset tour number press this key on KEB200 to run this preset tour Tour Stop When the action of a key is set Tour Stop press this key on KEB200 to stop running a tour Pattern Run When the action of a key is set Tour Run and the value of the key is set to a preset pattern number press this key on KEB200 to run this preset pattern Pattern Stop When the action of a key is set Pattern Stop press this key on KEB200 to stop running a pattern Set Auto Tracking When the action of a key is set Auto Tracking
13. to a previously saved configuration press the button to 55 IJ EverFocus EVS410 locate and select the saved config file see above and then click the button The settings will be restored to the previous configuration Upgrade Firmware Upgrade the EVS410 with the latest firmware Press the button to locate the firmware file Press the Upgrade button to upgrade the firmware Note 1 Do not disconnect power to the unit during the upgrade The unit reboots automatically after the upgrade has completed 1 5 minutes 2 During upgrade process all event recording actions will be stopped They will resume after the camera is rebooted 56 f EverFocus EVS410 4 9 EKB200 x f9EverFocus Action List EKB 200 Button Mapping Key No Action Value 1 CO OO Om AUN ak o h bh ho FRERE RI RER IE ah ww IRIS IRIS FOCUS Near FOCUS Far AIN MN 4 9 1 Action List EKB200 Button Mapping EKB 200 is an IP surveillance keyboard controller powered by USB port User needs to set related control for each EKB 200 key in this window In Action list window there are 12 EKB 200 button mapping options From Key No 1 to Key No 12 can be set User can choose action and set value for each Key No If the command requires a value such as GoTo Preset x or Tour x user needs to enter the number x
14. video file attached This server requires a secure connection SSL Check the box to allow a secure connection for the server SSL encrypts the segments of network connections above the Transport Layer using symmetric cryptography for privacy and a keyed message authentication code for message reliability Send Test Mail Press button to send a test e mail to the designated address Set FTP Server The settings relating to an FTP server to be used to receive alarm images can be configured FTP Server Enter the IP address or the host name of the FTP server ay f EverFocus EVS410 FTP Port Enter the port number for FTP server Default is 21 Recording Path Assign the recording path User Name Set FTP User name Password Set FTP password PASV mode Check to enable Passive mode most sites normally require Passive mode If unable to establish a connection uncheck PASV mode Test FTP Server Press button to send a test file to the designated FTP server Press Apply to apply the setting changes or Reset to reset without saving the change 5 3 4 HTTPS f9EverFocus Network DDNS SMTP FTP HTTPS SNMP Network Alarm Create Certificate Create Certificate Method Create Self signed Certificate Create Certificate Request Created Request C 1t ST setrt L rrt O sfds OU sfd CN sdsfd Install Signed Certificate Certificate pl Installed Certificate Information C we ST rwe L qwe O
15. 0 user IDs can be created to access the video encoder The user information screen displays the authorized IDs Access levels are e Supervisor A dministrator a supervisor administrator has unrestricted access to the Setting menus and can determine the registration of all other users However an administrator is not allowed to change a supervisor s account and password 40 f EverFocus EVS410 User can view the Live View page system info network video audio and adjust user config settings The User level does not have access to the user event and system pages Guest the lowest level of access which only allows access to the Live View page Anonymous viewer login Check the box to allow anonymous viewer login Note Please select Active in Status section to activate an account Press Apply to apply the setting changes or Reset to reset without saving the changes 41 ld EverFocus EVS410 5 7 EVENT An event in the video encoder is when an Event Type is activated and causes certain actions to be performed The event type 1s the set of conditions that specifies how and when which actions will be performed This table describes how to setup action types and event type Motion Alarm Manual Detection Video Tampering Schedule Pre Post Action Inputl 4 Trigger 1 Record to PC only works when PC and IP camera are connected 2 Only Upload to FTP can be selecte
16. 2 DDNS f9EverFocus Network DDNS SMTP FTP HTTPS SNMP Network Alarm DDNS Settings O Enable Service ISP www everfocusddns com IP Camera Name O www dyndns com FQDN Password O www sitelutions com Record ID Username everfocusddns com Register Update O www no ip com DDNS settings When accessing the video encoder via the Internet in a network environment where the site IP address is obtained using DHCP the DDNS function is necessary To use the DDNS function it is necessary to connect to the dedicated DDNS server We support 4 DDNS server providers as follows O www everfocusddns com O www sitelutions com O www dyndns com O www no ip com Enable Check the box to enable DDNS setting 25 f EverFocus EVS410 Service ISP If you choose EverFocus DDNS server you can easily register a DDNS name and obtain free DDNS services from EverFocus at www everfocusddns com Enter an IP Cam Account Name everfocusddns com Press button to register or update DDNS account If you wish to get a domain name from another DDNS provider it may be necessary to configure Record ID FQDN Username and password and register in advance for DDNS services Refer to the web site for further information about the DDNS provider Press Apply to apply the setting changes or Reset to reset without saving the change 5 3 3 SMTP FTP f9EverFocus Network DDNS SMTP FTP H
17. 2t28mucwDAYDVROTBAUWAWEB ZAN BgkagnkiG9w0BAQUFAAOBGQB2211i3jm2rspJzfU4SL3uA2xGIigzaER4KxjKlAd05S GN5nG7CXL8 6NeWkAq FkwHjeasmfBca3ikbH5SccWff0s4JaZaqQ0 SXna amp fLugtw33 tgdoseFptZvINWMjgoN5SpNYSYAHWNIDVQSXnuCLUXF2C5jVW1IBKDVEGPUZ plGXYA BgN cy BnM http 192 168 13 194 networkHttp Wizard htm To create and install other certificates please remove the existing one Press Remove button to erase the certificate Install Signed Certificate When the signed certificate is returned press Browse button to search for the issued certificate and press Upload button to import the certificate Installed Certificate Information Press Property button to view the property of self signed certificate To create and install other certificates please remove the existing one Press Remove button to erase the certificate The pop up window shows an example of a self signed certificate E http 192 168 13 194 metworkHttp Wizard htm Validity Not Valid Before Thu Apr 28 08 24 29 2011 Not Valid After Sun May 8 08 24 29 2011 Subject C tw ST taipei L test O test OU test CN test Certificated PEM format RSA PRIVATE KEY MIICXAIBAARBgQDV2C3iS8RSoDjUlEaiB9UowrQz25B8Q1IcxAiNvWEjdv3WEXeBEy p QY400BEBw 6gScRSAlnNPQfAz 1 VnynFE9G74KZCKGQ XH438smyO0HAJix8zRV GOIvHExQi ewlju0FiaJ6iSegnVc 9a5r8b1lymL3nMRe9vC3cMQa91D8zHEHGWIDAQAS AOGANiwo 3jknpOJsEKXbBCIVnMuouTeGuKkElVaWwW XPen6AajtkCcmajC3Nogurnt L9PzW5HmXXA9zVodc6gfymL K51M1r
18. 34 J EverFocus Internet Explorar Security Warning fen you and bn st al this oler E Namna Eva rah Publisher Ewerfoous Ledtranict Corp E we apene ma foer Wiska Files From tha Interest gan ba upay this File Dype can potential h rm ou computer Goby rial sl bano from publiser yaaa bust bs Vee okt i Oper page hip 192 168 12 elk ken Step 6 Congratulations You should now be able to see the live image EverFocus E T Esme EVS410 Camera 1 7 02 27 5 5 2011 Fps 29 30 ez SK SK FE es EE Pee 4 SANE ee eee ee ETA N te A Playback Settings gt Exit E tar Video Stream CH1 Stream1 v View Size 704x480 v mm col Mi a Fg PTZ Control O J cT Manual Control Trigger Event G O0 Ole SS 0O f EverFocus EVS410 Live Press WT button to display the Live page Double click on the image to show a full screen display double click again or press ESC to return to the normal live display 2 Press button to go SD card playback page Please refer to Section 4 Playback for further information G Press setting button to enter the Setting page In the Setting page there are 9 sections System Info User Config Network Video Audio User Event System and EKB Please refer to Section 5 Setting for further information 4 Press gum button
19. EVS410 4CH H 264 Video Encoder User s Manual J EverFocus Copyright O EverFocus Electronics Corp Release May 2011 Rev 0 f9EverFocus ESO Product Name EVS410 EverFocus 4CH H 264 Video Encoder Model Number s EVS410 FCC Notice Declaration of Conformity Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential Installation This equipment generates uses and can radiate radio frequency energy and 1f not installed and used in accordance with the instructions may cause harmful interference to radio communications However there 1s no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver 1s connected Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications made to this equipment not expressly approved by EverFocus or parties author
20. STJTMYrTx3wWwBARZ1 A2P0jh 1inrFPlsX n cD5uDo 6eyZ1l9CNCanUGlYpFAcCvwbXl x17xpMSqGF4lkNECQQD9BDWXIcnisL24 DWrcVURKkILbZ5UnNT7YO5Swz 122y35qBy6yGmaO0QebSNPv5SvGRIBKLbLYgLAdiFLvMaq VLCZiRBzAKEAZ2HX2Dg4x kuMSbcCnZAFOMS8SVZ5GZMEKkfObVSbAB7nPANXENrmYN gJIgnJiEmQasf L5q209n3s4 wWuUQYvuMuQIJACMOCyYVJUPIbeg2dbkjIp4klYeVV6 2AaIjIxJalBPGgERDv43HHtD4XgQWjwsTd7InjNfnxz7QPG17FtumoLS3QUIBAKsk WO 62 n 52z3UwnTjebjqxnO3TRwWwTSUGSQeiSRvETn2MnokKW p amp SXMEzv5 s0igzBbz N22a5nZ3C6KKkSVn5SWsECQDM FYtazZQL7BUUfETyy43 4gnzAbgknkNBF5SgqOcc5Z TtOA6NN44PLgfWMCOrUX Y31GOXnV1r3Q34G45gnh5JM END RSA PRIVATE KEY IN C ATT CERTIFICATE BE MIIDTDCCArWgAwIBAgIJALRRmItH4KsyMAOGCSgqGSIL3DQEBBQUAMHgxCzAJBGNV BAYTANRIMQSWDOQYDVQQIEWZOYW1IwZWkxDTALBONVBACTBHRIC3IQXDIALBONVBAOT BHR1C3QxDITALBONVBASTBERIC3IOXDIALS ON VBAMTBHERIC3IOxEDA2aBo0kgqnkiGcow08 CQEWDXRIc3RAdGV2dC5jb2 0wHncNMTEwNDISMDGYNDISWncNMTEWNTASMDGYNDIS http 192 168 13 194 networkHttp Wizard htm 30 f EverFocus EVS410 5 3 5 SNMP This page allows the user to set SNMP settings so 1t can be used by a NMS Network Management System IJ EverFocus Network DDNS SMTP FTP HTTPS SNMP Network Alarm Set SNMP Server C Enable SNMP v1 v2 v2c Read Only Community private Read Write Community Trap Community public Trap Address 0 0 0 0 C Enable SNMP v3 Read Only Username efsnmpuser Read Only Auth Method MD5 E Read Only Auth Ke
21. TTPS SNMP Network Alarm Set SMTP Server email SMTP Server 0 0 0 0 SMTP Port F Authentication User Name Password Receiver Address Sender Address O Attach Image O This server requires a secure connection SSL Send Test Email use to separate addresses Set FTP Server FTP Server FTP Port Recording Path User Name Password O PASV Mode Test FTP Server MN a a Set SMTP Server email The settings relating to the mail server used to send the e mail notification from the video encoder to predefined addresses via SMTP can be configured 26 f9EverFocus Fe SMTP Server Enter the IP address or the host name of the SMTP server used to send e mails SMTP Port Enter the port number for SMTP Default is 25 Authentication Check the box if the SMTP server requires Authentication user password User Name Input the login user ID if the SMTP server requires Authentication max 31 bytes a z A Z 0 9 Password Input the password if the SMTP server requires authentication max 15 bytes a z A Z 0 9 Receiver Address Input the e mail address to receive an e mail message when the EVENT is enabled and triggered Please use to separate address Sender Address Input sender s e mail address so that receiver can recognize the sender when an event message is sent out Attach image Check the box to send an e mail notification with a FPS
22. boot Press Apply to apply the setting changes or Reset to reset without saving the change 21 13 EverFocus EVS410 5 3 Network The network settings and the settings relating to Network DDNS SMTP FTP SNMP and Network Alarm can be configured on this page The Network setup page has 6 tabs Network tab the DDNS tab the SMTP FTP tab the HTTPS tab the SNMP tab and the Network Alarm tab 5 3 1 Network IJ EverFocus Network DDNS SMTP FTP HTTPS SNMP Network Alarm IP Settings IP Type IP Address E 32 168 13 13 Subnet Mask Gateway 16 Primary DNS 88 10 18 Secondary DNS Username Password Port Settings HTTP Port 80 HTTPS Port 443 RTSP Port 554 Multicast Settings Enable Multicast Multicast IP 229 238 144 152 Time to Live lt s MN an The following information is required to configure the network settings Contact the network administrator or your Internet service provider IP Settings e IP Type e IP address e Subnet mask Gateway when using the gateway server router Primary DNS Secondary DNS when using DNS IP Type DHCP Configure the DHCP server not to assign the same IP addresses used 22 A EverFocus Gen for the other video encoder and PCs whose IP address is unique Refer to the network administrator for the settings of the server Default DHCP Note If a DHCP server is not a
23. d to record event video to remote site 3 Up to 10 event types can be configured in the camera and up to 3 of these can be configured to upload images 42 ld EverFocus 5 7 1 Event Settings EVS410 The settings relating to event occurrences such as settings for motion alarms and schedule can be configured on this page The Event page has 5 tabs Event Settings tab Motion Detection tab Tamper Detection tab Alarm I O tab and Schedule tab ld EverFocus Event Settings Motion Detection Tamper Detection Alarm I O Schedule Event List Event Type IO SR videoloss Notification syslog email SD syslog Modi Remove w 47yil Pre Post Trigger Settings Pre trigger Buffer 10 Sec Post trigger Buffer 10 Sec Event List Press button to add an event condition To modify the event list click on the event and it will be highlighted Press button to modify the setting To remove an event from event list click on the event and it will be highlighted Press button to remove the event Check Enable checkbox to activate event actions when the event occurs in the specified time zone Enable Name Event Type Notification Manual Trigger manual rigger SD PC F schedule record SR SD To change the priority of events click on the event and it will be highlighted Press or button to change the priority of events The 43 ld EverFocus EVS410 event
24. displayed will be saved as a jpg file The location where the snapshot data 1s saved can be specified in Setting gt User Config Please refer to Section 5 2 User Config for further information Zoom In the image Zoom Out the image the file to your local PC Archive the video file Specify the recording path if you wish to save Lock the selected file The file saved in the SD card will be 16 f EverFocus EVS410 overwritten if the setting in System gt SD Card gt Overwrite is ON however the data being locked will be protected from overwriting Remove Remotely remove the selected file from SD card button to return to live view 5 SETTINGS Click this button to display the setup menu Video Stream CH1 Stream1 v View Size 704x480 Note Press button anytime to return to live view 5 1 System Info System information and system log events can be accessed on this page via 2 tabs Information tab and Log tab 5 1 1 Information Tab System Information Firmware version MAC address Model Name and TV Out format this data may not be changed in this page and is for reference only 17 13 EverFocus EVS410 f9EverFocus Information Log 1 8 System Information Firmware Ver 1 0 1 MAC Address 00 11 14 07 20 a8 Video Type AMES User Config Model Name gt EV5410 So r ES eee El 5 1 2
25. dong 518101 China TEL 86 755 2765 1313 FAX 86 755 2765 0337 www everfocus com cn marketing everfocus com cn EverFocus USA New York 415 Oser Avenue Unit S Hauppauge NY 11788 USA TEL 1 631 436 5070 FAX 1 631 436 5027 www everfocus com sales everfocus com EverFocus Europe UK Unit 12 Spitfire Business Park Hawker Road Croydon Surrey CRO 4WD UK TEL 44 20 8649 9757 44 845 430 9999 FAX 44 20 8649 9907 www everfocusuk co uk salesuk everfocus com EverFocus
26. e used with the password to authenticate with the device Read only Read only Auth Key Set authentication password Read only Read only Privacy method Select the privacy method which will be used with the encryption password Read only Read only Privacy key Set privacy password Read only Read Write Username Set the user name to be used for authentication and privacy Read write Read Write Auth Method Select authentication method which will be used with the password to authenticate with the device Read write Read Write Auth Key Set authentication password Read write Read Write Privacy Method Select the privacy method which will be used with the encryption password Read write Read Write Privacy Key Set privacy password Read write 32 13 EverFocus EVS410 5 3 6 Network Alarm reserved for PowerCon f9EverFocus Network DDNS SMTP FTP HTTPS SNMP Network Alarm Set Network Alarm Protocol UDP Port No 1600 Unique ID 0000000001 Server 1 182 188 1 1 Server 2 192 168 1 1 Server 3 192 168 1 Set Network Alarm This function is reserved for PowerCon software for the details regarding these settings please refer to the documentation for the PowerCon network alarm protocol 5 4 Video The settings relating video such as streaming video encoder can be configured on this page The Video page has 3 tabs the Multi streaming tab t
27. een Control The whole screen is divided into 16 areas Every area corresponds to a PTZ function click on an area to execute the specific function of PTZ Please see the table of the PTZ function with its mapping area number below Please refer to the above screenshot for the area number 1 PTZ pan and tilt 2 PTZ tilt up 3 PTZ tilt up 4 PTZ pan and tilt to left and up to right and up directions directions 5 PTZ pan left 6 Focus Closer 8 PTZ pan right 9 PTZ pan left 10 Focus Further 11 Zoom Out 12 PTZ pan right 13 PTZ pan and 14 PTZ tilt down 15 PTZ tilt down 16 PTZ pan and tilt to left and tilt to right and down directions down directions PTZ Control Shortcuts Right click the mouse to get a PTZ Control Shortcuts panel User can control the PTZ through a PC s keyboard The keys in red color correspond to the same keys of keyboard 12 Manual Control Trigger Event Trigger Event Press Trigger Event button to trigger an event directly from the live view page and event actions will be initiated if they have been set up in the Event menu Please refer to Section 5 7 1 Event Settings 3 Manual Control Reset Alarm Press Reset Alarm button to reset an alarm condition remotely The icon is used to fold the control panel at left and view the image in a full screen Click on icon to unfold the control panel 45 Status Display The name of the device currentl
28. er key and then click Go button to move the camera to a preset location Note To use this function user need to set preset location in advance 12 13 EverFocus EVS410 Auto Pan button Click this button first and input a preset auto pan No by clicking number key 1 for AB Pan 2 for Endless Pan and then click Go button to run a preset auto pan ote To use this function user need to set Auto Pan in advance Pattern button Click this button first and input a preset pattern No by clicking number key 1 4 and then click Go button to run a preset Pattern ote 1 Click on live screen once to stop running pattern 2 To use this function user need to set Pattern in advance Tour button Click this button first and Input a preset Tour No by clicking number key and then click Go button to run a preset tour ote To use this function user need to set tour in advance Number button Go button and Clear button Click desire number button and it will show in the gray text area at lower left corner Click Clear button to clear the text area Click Go button to run a selected function Clear button Click this button to clear the digit selection indicator Menu button Click this button to enter to OSD menu Set button Click this button to set preset point Delete button Click this button to delete preset point 13 A EverFocus E EVS410 On Scr
29. ernally in the video encoder from the time immediately after the trigger condition has ceased been reset Input the desired length of post trigger buffer time It can be set up to 120 seconds Press Apply to apply the setting changes or Reset to reset without saving the change 5 7 2 Motion Detection f9EverFocus Event Settings Motion Detection Tamper Detection Alarm W O Schedule Motion Detection Channel Channel 1 Area P Area 1 PE 2 area 3 area 4 Enable O O O O Sensitivity 9 e 5 e Motion Detection Channel Select the channel to be configured User can define the motion areas to be detected by clicking on 2 points sequentially to form a rectangular on the preview window with the mouse The rectangular area between these 2 points is filled with color and this is the motion areas Press L Ubdate Image to update the current image Press LSelectAll to have the entire screen selected for motion detection 45 13 EverFocus EVS410 Press to clear all selections Press and click on the polygon to erase that polygon There are 4 possible motion trigger areas which can be distinguished by 4 different colors Check the Enable checkbox to enable event actions related to that area For each area you can set the event action in response to motion detection in that area Event actions can be set in Event section In addition you can set the Sensiti
30. etup the Date Time to be stamped on the video steam Date Time Check the box to enable time stamp function 35 13 EverFocus EVS410 Select Date Format from the following options Time Format 24 Hours or 12 Hours Position Select the position where the text will be displaying from Upper Left Lower Right Lower Left Press Apply to apply the setting changes or Reset to reset without saving the change 5 4 2 Camera f9EverFocus Multi Streaming Camera Privacy Mask Channel Channel 1 vi Camera Settings Channel Title Camera 1 PTZ Function ON O OFF ID 1 Protocol Pelco D vi Image Settings Brightness 0 10050 Contrast 0 10050 Hue 0 10050 Saturation 0 10085 Channel Select the channel to be configured Camera Settings Camera Title Add camera title PTZ Function Select ON or OFF for PTZ function 36 f9EverFocus ESO ID This entry 1s used to assign the own ID code of the camera Protocol Select protocol from Everfocus Pelco D Pelco P Samsung and Panasonic Press Apply to apply the setting changes or Reset to reset without saving the change Image Settings Brightness to increase or decrease object contrast of images It 1s adjustable from 0 255 Contrast to increase or decrease object contrast of images It is adjustable from 0 255 Hue to increase or decrease hue of video images It is adjustable from 0 255 Saturation to inc
31. fferent compression formats resolutions and frame rate to monitor and control analog cameras remotely over network Featured with intelligent video capabilities such as video motion detection and camera tampering detection makes the EVS410 stand out from competition as the best choice for IP video surveillance system 2 FEATURES Oo Dual Codec for H 264 and MJPEG m 30 FPS frame rate in all resolutions o H 264 MJPEG dual stream output and independent video stream configuration from each channel for simultaneous live monitoring and high resolution recording e Built in high performance 3D de noise and de interlacer engines to reduce noise artifacts increase S N ratio and covert videos from interlace to progressive O Smart Wizard settings for varied Event and schedule recording Support PTZ camera control via RS485 e Built in slot for an SDHC card enables local event or backup recording in the event of network interruptions O Two way Audio 13 EverFocus EVS410 3 ACCESSING THE MENU Step 1 Start an Internet Explorer browser session Before accessing to the EVS410 over IE browser user should adjust the security level Open the IE browser and set the security level to Low in Tools gt InternetOptions gt Security gt CustomLevel and enable ActiveX Control and Plug in directly as well Internet Options Security Settings El E General Security Privacy Content Connections Programs Advanced
32. he Camera tab and the Privacy Mask tab 33 f EverFocus EVS410 5 4 1 Multi Streaming ld EverFocus Multi Streaming Camera Privacy Mask Stream Settings Channel Channel 1 E Stream 1 Format H 254 w Resolution D1 704x480 Frame Rate 30 x Bit Rate O Constant Bit Rate 3M vi O Variable Bit Rate Highest Bit s Stream 2 Enable Format H 264 v Resolution CIF 352x240 Frame Rate 30 vi Bit Rate O Constant Bit Rate 3M w O Variable Bit Rate Highest Bit s Apply Reset J Video Recording Settings Channel 1 Stream 1 Channel 2 Stream 1 lv Channel 3 Stream 2 Channel 4 Stream 1 vi Video Stream AVI MN w Time Stamp Settings Date Time Date Format yyyyimi Time Format 12Hours vi Position Upper Left vi Y Stream Settings The system can output 2 video streams simultaneously for each channel For each of them the user can set compression format resolution and frame rate individually Stream 1 is always enabled for live view Check Enable box to enable stream2 Channel Select channel number for the stream settings Format Select compression format from H 264 and MJPEG Bit Rate The bit rate can be set as Variable Bit Rate VBR or Constant Bit Rate CBR Constant Bit Rates 3M 2M 1 5M 1M 750K 500K 384K 256K 128K 64K 32Kbit s CBR allows you to set
33. hronizations with the NTP server Press Apply to apply the setting changes or Reset to reset without saving the change 50 A EverFocus PP 5 8 2 Daylight Saving IJ EverFocus pe Date Time Daylight Saving SD Card Serial Communication Maintenance Set Daylight Saving O Enable Daylight Saving Start LAST ly Sunday v in March wi Switch from 03 00 To 02 00 End LAST v Sunday v in November w Switch from 02 00 To 03 00 Set Daylight Saving Check Enable Daylight Saving checkbox to enable daylight saving Set the start time for daylight saving time Set the start week for daylight saving time 1 2 3 4 Last Set the start day of the week for daylight saving time Sunday Monday Tuesday Wednesday Thursday Friday Saturday Set the start month for daylight saving time January February March April May June July August September October November December Set the starting time for the change to daylight saving time Choose the From time and End time when daylight saving starts Set the end time from daylight saving time Set the end week from daylight saving time 1 2 3 4 Last Set the end day of the week from daylight saving time Sunday Monday Tuesday Wednesday Thursday Friday Saturday Set the end month from daylight saving time January February March April May June July Augus
34. ime Daylight Saving SDCard Serial Communication Maintenance Machine Name Settings Machine Name EV5410 Set Time Zone Time Zone GMT v Set Date Time Manually Date Al H 04 04 01 Set Date Time Sync Enable NTP NTP Server ntp0 nl net Sync Interval a Machine Name Setting Machine Name Enter the name for the video encoder The entered name will be displayed in the status display area and used to label any recoding and or snapshot folders created on a user s PC Press Apply to apply the setting changes or Reset to reset without saving the change Set Time Zone Time Zone Select a time zone according to where the video encoder is located 49 f EverFoc us EVS410 Set Date Time Manually Date Click the calendar and pick the date Press lt lt to go previous year lt to go previous month gt to go next month and gt gt to go next year 30 31 Time Click on Hour Minute Seconds am pm then use up arrow to increase value and down arrow to decrease value Press Apply to apply the setting changes or Reset to reset without saving the change Set Date Time Sync Check Enable NTP checkbox to enable NTP server NTP server Time automatically adjusted by synchronizing with NTP server will be used as the standard time for the video encoder Sync Internal Select an interval 1 24 hours in I hour intervals to elapse between sync
35. ized by EverFocus could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation EverFocus Electronics Corp 12F No 79 Sec 1 Shin Tai Wu Rd His Chi Taipei Hsien Taiwan R O C EVS410 complies with CE and FCC rules A EverFocus AS About this document All the safety and operating instructions should be read and followed before the unit is operated This manual should be retained for future reference The information in this manual was current when published The manufacturer reserves the right to revise and improve its products All specifications are therefore subject to change without notice Safety Notices These limits are designed to provide reasonable protection against interference This equipment may generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct
36. n be specified in Setting gt User Config Please refer to Section 5 2 User Config for further information O Play Audio Transmit Audio lt Click the Play Audio and Transmit Audio buttons to switch the sound off and on for the audio input and output respectively di PTZ Control Press button to open PTZ control window Note When PTZ function is ON digital zoom function will be disabled Press J button to close PTZ control window EVS410 provides 3 methods to control PTZ A Control panel On Screen Control PTZ Control Shortcuts 11 f EverFocus EVS410 A 5 EverFocus j c PTZ Control zon EG ES MM Playback IRIS EJ Settings Exit st r Video Stream Ht Stesmi s PT Speed Standard w EVS410 Camera 16 55 01 5 4 2011 Fps 30 30 View Size 704x480 w C WN o KE me PTZ Control PTZ Control Shortcuts Move 21 Go Preset 123456789 Zoom TPqU9WPgDn ff aaa 80000 A Control Panel Zoom in EY Zoom out ry Focus far av FJ id Focus near Iris SSS is 4 Arrow buttons Click on an arrow button to navigate in that direction stop current action User can select PTZ speed from High Standard Low and Minimum Preset button Click this button first and input a preset position number by clicking numb
37. nded power supplies Power supplies must comply with the requirement of the latest version of IEC60950 1 Substitutions may damage the unit or cause a fire or shock hazard Electrostatic sensitive device Use proper CMOS MOSFET handing precautions to avoid electrostatic discharge Installation should be performed by qualified service personnel only in accordance with the National Electrical Code or applicable local codes Terms and Trademark Ethernet Internet Explorer Linux Microsoft Windows WWW are registered trademarks of the respective holders Other product names appearing in this User s Guide may be trademarks or registered trademarks of their respective holders Java and all Java related logos and trademarks are trademarks or registered trademarks of Sun Microsystems Inc in the United States and other countries Support If the unit ever needs repair service the customer should contact the nearest EverFocus Electronics Corp Service Center for return authorization and shipping instruction About this AC Adaptor Specifications for AC adaptor Power Supply 12VDC 5A Power Output 12VDC 5 A Operating Temperature 0 C 40 C 32F 104F External Dimensions 35 mm x 54 22 mm x 123 12 mm 1 38 x 2 13 x 4 85 A EverFocus Je TABLE OF CONTENTS ls INTRODUCTION cosita cintia 7 HETEN 7 J ACCESSING THE MENU osa ia 8 FTBS 15 o NG APA Inn A 17 AA A 17 BIN 17 SL Lor e nas 18 RR A ua uu 19 NNN
38. ndra Kurla Complex Bandra East Mumbai 400051 India TEL 91 22 6128 8700 FAX 91 22 6128 8705 www everfocus in sales everfocus in Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life should be disposed of separately from your household waste Please dispose of this equipment at your local community waste sollen collection recycling centre In the European Union there are separate collection systems for used electrical and electronic product Please help us to conserve the environment we live in Ihr EverFocus Produkt wurde entwickelt und hergestellt mit qualitativ hochwertigen Materialien und Komponenten die recycelt und wieder verwendet werden k nnen Dieses Symbol bedeutet dass elektrische und elektronische Ger te am Ende ihrer Nutzungsdauer vom Hausmill getrennt entsorgt werden Bitte entsorgen Sie dieses Ger t bei Ihrer rtlichen kommunalen Sammelstelle oder im Recycling Centre Helfen Sie uns bitte die Umwelt zu erhalten in der wir leben EVS410 EverFocus Europe Germany Albert Einstein Strasse 1 D 46446 Emmerich Germany TEL 49 2822 93940 FAX 49 2822 939495 www everfocus de info everfocus de EverFocus China Shenzhen AF No 2 D4 Building Wan Yelong Industrial Park Tangtou Road Shiyan Baoan Shenzhen Guang
39. options dddd mmmm d yyyy day of week Month date year Time Format choose between 24 Hours or 12 Hours 20 Ad EverFocus Vea Press Apply to apply the setting changes or Reset to reset without saving the change Recording Snapshot Export Setting Enable Event Recording to PC Allow event video recorded to users PC if any events have been set to record to PC Export folder Select Export folder by clicking on button then direct to the folder to be exported File size Set the limit for the size of the single recording file in minutes When the single recording file size exceeds the time you set the system will create a new file to continue recording Overwrite Select ON for overwriting recording snapshot file when the disk storage capacity 1s full If the remaining hard disk capacity is less than MB enter the value you wish to set between 50 2000 the system will stop recording or start overwriting Press Apply to apply the setting changes or Reset to reset without saving the changes Language Settings Language Select the language to be displayed in web page Default language is English To add a new language which 1s not listed in the original configuration press the Browse button to locate the new language file evb and then click the Load button Note Uploading a new language file will reboot the system automatically Please reconnect to the Video encoder after re
40. rease or decrease color saturation of video images It 1s adjustable from 0 255 Press Apply to apply the setting changes or Reset to reset without saving the change 37 13 EverFocus EVS410 5 4 3 Privacy Mask Md EverFocus Multi Streaming Camera Privacy Mask Privacy Mask Settings Channel Channel 1 vi Update Image Jus MN s Area PM2 PM3 Pus Enable O O O This mode masks areas you do not want to display on the screen or record User can define the area to be hid by clicking on 2 points sequentially to form a rectangular on the preview window with the mouse The rectangular area between these 2 points 1s filled with color and this 1s the privacy mask area Press Update Image to update the current image Press l electAll to have the entire screen selected for privacy mask Press to clear all selections Press and click on the rectangular to erase that area There are 4 privacy mask trigger areas which can be distinguished by 4 different colors Area Enter Privacy Mask Area name Check Enable checkbox to enable event actions related to that area Press Apply to apply the setting changes or Reset to reset without saving the change 38 13 EverFocus EVS410 5 5 Audio The EVS410 video encoder can transmit audio to client PCs by connecting an external source line 1n and can play audio received from client PCs line out into amplified speaker
41. recording Notifications Trigger alarm output Send mail notification Upload video to FTP Record video to SD card Record video to PC and Network alarm OCAL STORAGE buffer Secure Disk physical layer specification version 2 0 oP eae Supports SDHC Host Specification POWER r nn n r n 0 r Power Supply 12 VDC Power Consumption PHYSICAL x ae Weight 6659 1 47 Ibs Dimensions 131 W x38 4 H x 164 4 D mm 5 2 W x 1 5 H x 6 5 D ENVIRONMENTAL r LULU Operating Temp 0 C 50 C 32 F 122 F Humidity 20 80 Humidity Certifications CE FCC f9EverFocus EverFocus Electronics Corp EverFocus Taiwan 12F No 79 Sec 1 Shin Tai Wu Road Hsi Chih Taipei Taiwan TEL 886 2 2698 2334 FAX 886 2 2698 2380 www everfocus com tw marketing everfocus com tw EverFocus China Beijing Room 609 Technology Trade Building Shangdi Information Industry Base Haidian District Beijing 100085 China TEL 86 10 6297 3336 39 FAX 86 10 6297 1423 www everfocus com cn marketing everfocus com cn EverFocus USA California 1801 Highland Avenue Unit A Duarte CA 91010 USA TEL 1 626 844 8888 FAX 1 626 844 8838 www everfocus com sales everfocus com EverFocus Japan SF Kinshicho City Building 2 13 4 Koto Bashi Sumida Ku Tokyo 130 0022 Japan TEL 81 3 5625 8188 FAX 81 3 5625 8189 www everfocus co jp info everfocus co jp EverFocus India Suite 803 Housefin Bhavan C 21 Ba
42. rk connection to the FTP server is unavailable Event Recording Follows the event action settings you have made in the Event menu to record event video to the SD card Both Event video will record to SD for both of the above situations Overwrite Select ON for overwriting older data when the SD card memory is full Select OFF for no overwriting the SD card data Note no recording can take place if the SD card is full and Overwrite is Off 52 f EverFocus EVS410 Press Apply to apply the setting changes or Reset to reset without saving the change SD Card Utility The total size and available size of the SD memory card will be displayed Depending on the state of the SD memory card the information will be displayed as follows Indication Description Capacity MB available MB used Formatting the SD Card Before formatting the SD memory card it is necessary to press the button Once the button is pressed the button will be shown for a user to re insert the SD card Press button to format SD card To obtain images from the SD memory card 1 Directly attach the SD card to a PC after removing the SD card from the video encoder Access the video encoder using the Windows command prompt or FTP client software The window with the user name and password entry fields will be displayed 2 Enter the user name whose access level is Administrator and its password Log in the video encoder
43. s This section describes how to configure the basic audio settings Audio IJ EverFocus Audio Audio Settings Enable Audio Audio Input Volume v 7 Check Enable Audio box to enable audio function Audio Input volume Adjust the Audio Input Volume for the audio input devices connected to the video encoder if there are problems with the sound input being too low or high Press Apply to apply the setting changes or Reset to reset without saving the changes 39 f EverFocus EVS410 5 6 USER J EverFocus User User Information Account SY Status user 1 ACTIVE user4 me s http 192 168 13 139 userWizard hin DISABLE user DISABLE user7 Account DISABLE users DISABLE no Description DISABLE user 10 DISABLE Password Confirm Authority ADMIN Status ACTIVE SD Card Playback OON O OFF Anonymous viewer login http 192 168 13 139m rWiz EY Press Add to add a user press Modify to modify a user press Remove to remove a user User Information Account Enter account name Description Enter description Password Enter a password Authority Select authority type from Supervisor Administrator User and Guest Status Status of the account select from Active and disable SD Card Playback Select ON to allow the user to playback SD card data Select Off to resist the user to playback SD card data Maximum 1
44. sad OU ad CN we Property KE MN Hypertext Transfer Protocol Secure HTTPS is a combination of the Hypertext Transfer Protocol with the SSL TES protocol to provide encrypted communication and secure identification of a network web server 28 J EverFocus EVS410 Before using HTTPS for communication with the Video Encoder a Certificate must be created first There are two ways to create and install a certificate Create self signed certificate A self signed certificate can be used until a Certificate Authority issued certificate has been obtained Click button to install a self signed certificate Although self signed certificates are free and offer some protection true security is only implemented after the installation of a signed certificate issued by a certificate authority The Certificate Information will automatically be displayed as shown below Create Certificate A Create Certificate Method Create Self signed Certificate Country Name State or Province Name Locality Name Organization Name Organization Unit Name Common Name Email Address Validity days issuing Certificate Authority by clicking button The Certificate Information will automatically be displayed as shown below Create Certificate Create Certificate Method Create Certificate Request Country Name State or Province Name Locality Name Organization Name Organization Unit Name Common
45. select the location where the exported log file will be saved 5 2 User Config 03 EverFocus User Config Video Audio Connection Protocol Setting Protocol Options amp RTP over UDP ORTP over TCP ORTP over HTTP Text Settings O Machine Name O Channel Title O Date Time O Frame Rate Red Foreground Color Green ss y Blue sncsA Position Upper Left ve Date Time Format Used in Text Date Format m d yyn Time Format amp 24 Hours O 12 Hours Recording Snapshot Export Settings Enable Event Recording to PC Export Folder CiEverFocusi m File Size 14 v Minutes Overwrite OON GO OFF If the remaining hard disk capacity is less than 50 MB 50 2000 system will stop recording or start overwriting Language Settings Language English vi Upload language file The configuration and operation of the Live View screen can be changed based on the login user ID The settings which can be customized for each of the 10 possible login IDs are Video Audio Connection Protocol Setting Protocol Options Select Video Audio connection protocol from RTP over UDP RTP over TCP RTP over HTTP Depending on user s network environment there are three connection protocols RTP over UDP This protocol allows for more real time audio and video streams However network packets may be lost due to network burst traffic and images may be broken Activate
46. t September October November December Set the ending time for the change from daylight saving time Choose the From time and End time when daylight saving ends Press Apply to apply the setting changes or Reset to reset without saving the change 51 fJEverFocus EVS410 5 8 3 SD Card J EverFocus Setup SD Card Notification System Info Event Recording Both m Overwrite SON OOFF User Config App Network SD Card Utility Capacity 30416MB available 720MB used 97 63 Remove To avoid SD card damage please press this button to remove or insert the SD card while the camera powered on to avoid SD card damage Format SD Card Note All data saved on the SD card will be erased when SD card is formatted Please do not turn off the power of the EVS410 network camera during the formatting process Video EKB200 Setup SD Card Notification Notification will be made via e mail when the remaining space of the SD memory card reached the value selected from the following 50 20 10 5 2 0 Notes 1 When 50 is selected e mail nottfication will be made each time the remaining space reaches 50 20 10 5 2 and 0 2 E mail notification may not always be made at a very moment when the remaining space of the SD memory card reaches the selected value Event Recording FTP backup only Event video will record to the SD card when the netwo
47. t End Time 2010 10 04T14 51 39 Event List Motion In the Search section 3 methods are provided to search the video 1 Search by File Press button to list all the files in the Recording List section In the Recording List file name and file information will be displayed Click the file 15 A EverFocus en button name that you wish to playback and press Play 2 Search by Time Press the calendar icon to select the date and time to be searched Press button to start time search In Recording List section the file name and file information that is the most close to the specified time will be displayed Click the file name that you wish to playback and press li Play 3 Search by Event Select which event type s to search for Choose from Alarm Motion or Video Loss Select Start Time and End Time Press Search button to start time search In Recording List section file name and file information will be displayed Click the file name that you wish to playback and press i Play Check Multiple Files and the playback function will keep playing to next file until the end of file list in the same folder Check Loop Again and playback function will loop playback the selected file 2 Playback the selected video Pause the playback video Stop the playback video Snapshot the current image The video image currently being
48. the account used only for PPPoE Password Enter Password of the account used only for PPPoE HTTP Port Enter HTTP port number HTTPS Port Enter HTTPS port number RTSP Port Enter RTSP port number Multicast Setting Multicast provides the most efficient usage of bandwidth when there are large numbers of clients viewing simultaneously A multicast broadcast cannot however pass a network router unless the router is configured to allow this It is not possible to multicast over the Internet for example Note also that all multicast viewers count as one unicast viewer Enable Multicast Check the box to enable multicast Multicast provides the most efficient usage of bandwidth when there are large numbers of clients viewing simultaneously A multicast broadcast cannot however pass a network router unless the router is configured to allow this It is not possible to multicast over the Internet for example Note also that all multicast viewers count as one unicast viewer Multicast IP Enter the multicast IP address Port Enter the multicast port Time to live Enter the multicast TTL value It is a limit on the period of time or number of iterations or transmissions in computer and computer network 24 A EverFocus EVS410 technology that a unit of data e g a packet can experience before it should be discarded Press Apply to apply the setting changes or Reset to reset without saving the change 5 3
49. the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase these separations between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment To reduce risk of fire or electric shock do not expose this device to rain or moisture Do not attempt to disassemble the device To prevent electric shock do not remove screws or covers There are no user serviceable parts inside Contact qualified service personnel for maintenance Handle the device with care Do not strike or shake as this may damage the device A Do not use strong or abrasive detergents when cleaning the device body Use a dry cloth to clean the device when it is dirty When the dirt is hard to f9EverFocus remove use a mild detergent and wipe gently Do not operate the device beyond its specified temperature humidity or power source ratings Do not use the device in an extreme environment where high temperature or high humidity exists Use the device at temperature within 0 C 50 C 32 F 122 F and humidity below 90 The input power source for this device is 12 VDC amp 802 3af PoE Use only the recomme
50. ting changes or Reset to reset without saving the change 47 A EverFocus Ge 5 7 5 Schedule f9EverFocus Event Settings Motion Detection Tamper Detection Alarm I O Schedule Schedule Settings O Event Recording MS Schedule Recording Event Schedule Deselect The event will start at the specified schedule After selecting a time zone the block will show the time zone settings How to set a schedule Select the edit actions of Event Recording Schedule Recording Event Schedule or deselect The first 3 actions are distinguished by 3 different colors There are 24 blocks one block 1hr on the time bar representing 24 hours respectively Set a schedule start time by clicking on a desired start time block on a time bar The selected blocks will turn the representing color which means this color timezone has been set to the event schedule The deselected blocks will turn back the original background color which means the timezone has not been set to the event schedule Press Apply to apply the setting changes or Reset to reset without saving the change 48 f EverFocus EVS410 5 8 SYSTEM Date Time Daylight Saving SD card and Maintenance settings can be accessed on this page The System page has 5 tabs Date Time tab Daylight Saving tab SD card tab Serial Communication tab and Maintenance tab 5 8 1 Date Time f9EverFocus Date T
51. to close the EVS410 network page Video Stream Video Stream CH3 Stream Select Video Stream from CH1 Stream 1 CH1 Stream 2 CH2 Stream 1 CH2 Stream 2 CH3 Stream 1 CH3 Stream 2 CH4 Stream 1 CH4 Stream 2 and Quad view to view all 4 channels stream must be enabled in camera Setting menu Please refer to Section 5 4 1 Multi Streaming for further information Notes about Quad view 1 Live view in Quad view mode it only displays stream I for each channel 2 View Size in Quad view mode dual channel view in 704x480 view size only 3 Manual Recording amp Snapshot in Quad view mode will be done for all 4 CHs simultaneously 4 Quad view does not support Digital Zoom function nor PTZ control function 6 View Size You can select View size to either reduce or enlarge the image to the appropriate SIZE Select the view size for live images from 704 480 576 640x480 352 240 288 320x240 176 120 144 f EverFocus EVS410 7 Record The record button is used to record the current video stream The location where the image file is saved can be specified in Setting gt User Config Please refer to Section 5 2 User Config for further information Note Record segment is unlimited However if you switch to any other page record will stop Snapshot The Snapshot button saves a jpg image of the video image currently being displayed The location where the snapshot data is saved ca
52. vailable the system will use xxx xxx xxx xxx as the default IP address Static IP User can manually set the static IP for network connection PPPoE This is for a DSL DIRECT connection application the ISP will require a user name and password That 1s if a single video encoder is connected directly to the DSL modem Note If PPPoE is used as IP type IP Utility software will not be able to detect the device IP address When not using DHCP enter the IP address of the video encoder Avoid address conflicts do not enter an IP address already used for a PC or other video encoders Every device on an IP network must have a unique IP address Subnet Mask This field is to set the netmask for your network so as the video encoder will be recognized within the network Example 255 255 255 000 typical for a Class C network When DHCP is selected the DHCP server will assign this value automatically Gateway This field is to set the gateway for your network so the video encoder will be recognized within the network When DHCP is selected the DHCP server will assign this value automatically Primary DNS An IP address of DNS server that 1s provided by ISP This address may be assigned automatically if DHCP is used A correct DNS IP is essential if DDNS will be used Secondary DNS If your ISP provides you an IP address secondary DNS please set it here 23 f9EverFocus ESO Username Enter User name of
53. vity level for the motion trigger separately for each area by selecting from 1 low 2 3 4 5 6 7 8 9 to 10 high Press Apply to apply the setting changes or Reset to reset without saving the change 5 7 3 Tamper Detection IJ EverFocus Event Settings Motion Detection Tamper Detection Alarm I O Schedule Tamper Detection Settings Trigger Duration Time 10 sec Tamper Detection Settings The video encoder tampering application generates an alarm whenever the video encoder is repositioned or when the lens is covered sprayed or severely defocused You must first create an event for the video encoder to send an alarm 46 13 EverFocus EVS410 Trigger Duration Time Set the trigger duration time from 10 120 secs Press Apply to apply the setting changes or Reset to reset without saving the change 5 7 4 Alarm I O f9EverFocus Event Settings Motion Detection Tamper Detection Alarm I O Schedule I Alarm Settings Input 1 Triggering Type Normal Open Input 2 Triggering Type Normal Open Input 3 Triggering Type Normal Open Input 4 Triggering Type Normal Open Output Contact Type Normal Open Alarm Settings Input 1 4 Triggering Type Select from Normal Close and Normal Open Default Normal Open Output Contact Type Select from Normal Close and Normal Open Default Normal Open Press Apply to apply the set
54. y es os Read Only Privacy Method Read Only Privacy Key Read Write Username efsnmpadmin Read Write Auth Method Read Write Auth Key ovsseeenneee Read Write Privacy Method DES Read Write Privacy Key osssenseenee Set SNMP Serve SNMP is the Simple Network Management Protocol The SNMP protocol is used by network management systems to communicate with network elements Many network elements support only SNMPv1 SNMPv2 and SNMPv2c Support for SNMPv3 is minimal Version Description SNMPvI SNMP which implements community based security SNMPv2c SNMPv2 with community based security SNMPv2 SNMPv2 with party based security SNMPv3 SNMPv3 which implements user based security Enable SNMP v1 v2 v2c Check the box to enable SNMP v1 v2 v2c 31 f9EverFocus Fe Read Only Community Identifies the community string for read only access The community string has to be the same as that set in NMS Read Write Community Identifies the community string for read and write access The community string has to be the same as that set in NMS Trap Community The community string used for the traps Trap Address Identifies the IP address of the trap destination Enable SNMP v3 check the box to enable SNMP v3 Read only Username Set the user name to be used for authentication and privacy Read only Read only Auth Method Select authentication method which will b
55. y being viewed current date time and current frame rate will be displayed 14 f EverFoc us EVS410 Event signals When an alarm or motion event is triggered a signal icon will flash to alert the user The motion event icons which differed by colors correspond to the motion trigger areas you have set in Motion menu Please refer to 5 7 2 Motion for detailed information about Motion setup TERRE gt Gc Rec Alarm Motion 7 Scroll bar Drag the scroll bar to move the image up down left or right if the image size exceeds window s size 4 Playback Playback button is only active when SD card is inserted If SD card is not inserted Playback button will be disabled Administrator can set user s authority to allow disallow user to view information from the SD card Below is the detailed description about remote playback from SD card Press the button to enter Playback page Playback is divided into 3 main sections Search Controls Playback Window and Recording List IJ EverFocus Ai S _ y de z Search by File Search by Time Search E Playback aid a Search by Event AN controls Alam FliMotion adei indow C Manual Trigger 1 Start Time End Time Recording List O Multiple Files Filename File Information Recording Loop Again File Size 4090776 20101004145115_0024_010200 avi File Lock false 3 Start Time 2010 10 04T14 51 15 J Lis

Download Pdf Manuals

image

Related Search

Related Contents

Title Page - Electrical and Computer Engineering  Active Cabinets XSA 110 – XSA 112 – XSA 115  Installation, Care & Use Manual Manual de  多種多彩なコマツ除雪機械  User Manual - INTEC Controls  SAFETY DATA SHEET  InFocus IN5544 User's Manual  SCOTT i-SX60  Nokia 515 Dual SIM User Guide  Manual PERFORADORA _Portugués  

Copyright © All rights reserved.
Failed to retrieve file