Home

Vantage 2K UG.book - Manuals, Specs & Warranty

1. You must use a USB cable optional to connect a printer to your computer Connecting an External Display 59 Connecting an External Display You can connect your notebook to a monitor or projector To Connect a Monitor Use the VGA Adapter Port on the left side of the computer Plug the display adapter supplied into this port If necessary plug one end of the display s power cord into the display and the other end into an AC outlet 5 See the manual that came with your monitor for more information on installation and use 60 VAIO Notebook User Guide To Connect a Projector You can use a projector such as the Sony LCD Projector as an external display Projector Soo CII VGA Display adapter supplied RGB signal cable Audio cable optional See the manual that came with your projector for more information on installation and use To remove the display adapter Press both sides of the display adapter connector and unplug it from the computer To select a display When you connect an external display to your computer you can press Fn F7 to toggle the output between the Liquid Crystal Display LCD the external monitor or both devices See Selecting the Display Mode in the online manual Customizing Your VAIO Notebook for more information Adding Memory G ji Adding Memory By adding memory to your notebook you can increase the spee
2. Battery lock lever pages 11 13 2 Battery release lever page 13 RIJ VAIO Notebook User Guide Connecting a Power Source You can use either AC power or a rechargeable battery pack as a power source Using the AC Adapter 1 Plug the cable attached to the AC adapter PCGA AC16V1 into the DC In connector on the computer Plug one end of the power cord into the AC adapter Plug the other end of the power cord into an AC outlet Notebook AC adapter supplied Power cord supplied The icon indicates the location of the DC In connector on the left side of your computer Using Battery Power You can use a battery pack as a source of power The PCGA BP2S battery pack that comes with your computer is not fully charged at the time of purchase Follow the steps below to insert and charge the battery pack Connecting a Power Source 11 To Insert the Battery Pack You can insert or remove the battery pack without turning off the computer when your computer is connected to the AC adapter Before inserting or removing a battery pack close the cover 1 Move the lock lever on the bottom of the computer to the unlock position Lock lever 2 Align the grooves and tabs on the battery with the tabs and notches on the back of the computer and then slide the battery toward the computer until it clicks into place 3 Slide the lock lever into the tock positio
3. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures i Reorient or relocate the receiving antenna L Increase the separation between the equipment and the receiver I Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 1 Consult the dealer or an experienced radio TV technician for help You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment Only peripherals computer input output devices terminals printers etc that comply with FCC Class B limits may be attached to this computer product Operation with noncompliant peripherals is likely to result in interfere
4. Using Launcher Mode To use the Jog Dial control click the Jog Dial control window or the Jog Dial control icon in the task tray Alternatively you can press the Jog Dial control while pressing the Ctrl key on the keyboard to switch to the launcher mode 1 Turn the Jog Dial control to select the item you want then press the Jog Dial control The window switches to the guide mode and shows the Jog Dial s function 2 Turn or press the Jog Dial control to use the desired function 3 To select another item switch to the launcher mode and repeat from step 1 40 VAIO Notebook User Guide Guide Mode The Jog Dial control window is in the guide mode when software is in use and the software window is active Depending on the software you are using you can select items from the displayed list using the Jog Dial control Some Sony software applications have two modes in List View Simple Menu and Full Menu You can switch the mode by pressing the shift key while turning the Jog Dial control Using Guide Mode The Jog Dial control window displays the Jog Dial s function Using the Jog Dial Control with Sony Software If Sony software that supports the Jog Dial control is active you can use the Jog Dial s functions that are allocated to that software For more information on functions allocated to software see the software applications online Help Using the Jog Dial Control with Other Software If the software you are
5. AMER O RD HAN O ve P re HERRE KURANE rn R REDA 75 Troubleshooting dessinent 81 Getting B yyy niere ygoywxy x xaXanmnmnmna 87 Using the System and Application Recovery CDe 88 Using the System Recovery CD s 88 Using the Application Recovery CD s 90 Hard Drive Partitions scoren eiename raise yene 91 Sp cification S y n e ke N MER en 92 Welcome Congratulations on your purchase of the Sony VAIO notebook Sony has combined leading edge technology in audio video computing and communications to provide you with state of the art personal computing Features For a complete description of the specifications of your VAIO Notebook see page 92 Exceptional performance Your notebook includes a fast Intel Mobile Pentium III processor and a V 90 compatible modem Q Portability The high capacity lithium ion battery provides hours of use without AC power Q Sony audio and video quality High quality MPEG1 video which supports full screen display 10 4 inch Active Matrix LCD screen and enables you to take advantage of today s advanced multimedia applications games and entertainment software Windows Operating System Your system includes the Windows 2000 operating system Communications Access popular online services send e mail browse the Internet and use fax features Actual upload and download speeds may vary due to line conditions ISP support and governmen
6. on the task tray located in the lower right corner of the Desktop window If Microphone is not displayed from the Options menu click Properties select Microphone from the Control panel and then click OK 2 From the Options menu click Tone Tone displays in the Microphone panel 3 Click Tone The Microphone setting window displays 4 Click Mic 20dB in Other settings and then click Close Adjusting volume You can adjust the sound device volume for playing or recording To adjust the volume when playing double click K S in the task tray located in the bottom right corner of the Desktop window The Volume Control window displays To adjust the sound of the other device from the Option menu click Properties In the Volume Adjust window select Playback and click the check box of the item you want to display in Control Click OK Sound device Volume Control WAVE PC Beep Telephony Microphone Line CD Audio MIDI2 3D Wide Function Adjust the sound level from the speakers or headphones Adjust the wavfile sound or the effected sound of Windows Adjust the beep sound when inserting or removing the PC card etc Adjust the modem or telephone line volume Adjust the internal or external microphone volume Adjust the audio equipment volume Adjust the volume of the CD in the CD ROM drive PCGA CD51 is optional Adjust the MIDI sound Widen the sound effect Effective for games etc To make the mi
7. Connecting a Power Source 13 The battery pack supplied with your computer is a lithium ion battery and can be recharged at any time Charging a partially discharged battery does not affect battery life The battery indicator light is on while you use the battery pack as a power source When battery life is nearly depleted the battery indicator starts flashing For some software applications and some peripheral devices your computer may not enter System Hibernation mode when the battery life is low To avoid loss of data when using battery power you should save your data frequently and manually activate a power management mode such as System Suspend or System Hibernation To Remove the Battery Pack You can insert or remove the battery pack without turning off the computer when your computer is connected to the AC adapter Before inserting or removing a battery pack close the cover 1 Turn off the computer and close the cover 2 Slide the lock lever to the unlock position 3 Slide the release lever to the unLock position and slide the battery away from the computer Lock lever J Battery release lever You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the computer is in System Suspend mode 14 VAIO Notebook User Guide Starting Your Computer Slide the LCD lock lever in the direction of the arrow and lift the co
8. The telephone company may make changes in its facilities equipment operations or procedures that could affect the operations of the equipment If this happens the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service If trouble is experienced with this equipment you can reach the Sony Customer Information Service Center at 1 888 4SONYPC or write to the Sony Customer Information Service Center at 12451 Gateway Blvd Ft Myers FL 33913 or find Sony Customer Service on the web at http www sony com pcsupport Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent This equipment cannot be used on public coin service provided by the telephone company Connection to Party Line Service is subject to state and possible provincial tariffs Contact the state or provincial utility service commission public service commission or corporation commission for information Telephone Consumer Protection Act of 1991 United States The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is sent and an identification of the busin
9. black frame and after processing are placed in the first available slot on the Product tray EX VAIO Notebook User Guide Editing Clips and Scenes You can edit your movie by adding effects and text adjusting the color and contrast and modifying the length of clips Working Panel Sound Color Monitor Speed Effect Palette Trim Palette Effect Knobs Adding effects to a scene or a clip 1 Double click the clip or scene to move it to the Working Panel 2 Select the Effects tab from the Editing tray 3 Drag and drop the Effect you want to add from the Effects tray to the Effects palette on the Working Panel To preview an Effect click on the clip in the Working panel monitor Your clip displays with the new effect on the Effect tray monitor 4 See help for instructions on adjusting effect duration and replaying clips scenes About Your Software 71 Saving a Movie 1 Verify that the clip s you want to save is on the Product tray See Help for more details on saving movies Click Export Select the format in which you want the document to be saved Click Next Locate the folder to which you want the file saved Name the file Click Save I OO 0 HB WW N Exporting movies may take a long time to complete Save movie as DV Digital Video takes the longest and Quick Save is the fastest 72 VAIO Notebook User Guide PictureGear PictureGear is a digital image management application that allow
10. can also print from a printer attached to either computer See the Smart Connect online help for more information i LINK cable i LINK cables compatible with your VAIO notebook include cables with the following part numbers VMC IL4415 a 1 5 meter cable with a 4 pin connector at each end VMC IL4615 a 1 5 meter cable with a 4 pin connector at one end and a 6 pin connector at the other and VMC IL4408A a 0 8 meter cable with a 4 pin connector at each end You can purchase these cables from your local retailer through the Sony VAIO Direct Web site http www sonydirect com notebookaccessories or by calling 1 888 315 7669 toll free Using Power Saving Modes 43 Using Power Saving Modes When you use a battery as the source of power for your computer you can take advantage of power management settings to conserve battery life In addition to the normal operating mode which allows you to turn off specific devices your computer has three distinct power saving modes System Idle System Suspend and System Hibernation When using battery power you should be aware that the computer automatically enters System Hibernation mode when the remaining battery charge drops to approximately 10 regardless of the power management setting you select 2 If your battery level falls to less than 10 you should either attach the AC adapter to recharge the battery or shut down your computer and insert a fully charged battery Norma
11. cas AVIS L indice d quivalence de la sonnerie IES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccord s une interface La terminaison d une interface t l phonique peut consister en une combination de quelques dispositifs la seule condition que la somme d indices d quivalence de la sonnerie de tous les dispositifs n exc de pas 5 L indice d quivalence de la sonnerie de ce mat riel est de 0 6 Contents Welcome in atiae NRA niet 1 BARS anse dan r 1 Unpacking Your NOR dames at ene 2 Manuals nn re r b ks nee b e LE EE 2 Software CS nn K RE R YE EN REK e ME JK EREK AER Se SES M e VEREN 3 Recovery CDS sms 3 CONOR eeen e e 2U_U_ Le e ekmemempe 3 Ergonomic Considerations aient onedinetenes 4 Setting Up Your VAIO Notebook 7 Locating Controls and Conn ctors suisse ini 7 FFONE r DD 7 Back aE E E E E E 8 ra E E E T E E 8 Roier n E 9 BOON oieri eea a Dr 9 Connecting a Power Source sun 10 Using the AC Adapter 10 Using Battery Power ss 10 Starting Your Computer nn ions 14 Shutting Down Your Computer eines 15 Using th ey DOA EA cuir 2 ci keb kez ek ena r be bex r beken rvke ew ik 16 Combinations and Functions with the Windows Key 18 elle SP yg ggg2gx2 g2x mrmrrrrrrr 19 Combinations and Functions with the Fn Key 20 Using the Touchpad assises nent 21 Using Smart PA a Nono 22 Recording from a mi
12. connector on the port replicator and both LCD and external display Only LCD LCD and external display AL Only external display lt lt Provides for the lowest level of power consumption When you execute this command the state of the system and state of the peripheral devices are written to the hard disk and the system power is turned off To return the system to the original state use the power switch to turn on power Toggles the mega bass function off and on This feature is available with headphone only Puts the system into System Idle mode a power management state To return the system to the active state press any key You can also carry out these functions using the Jog Dial control Some functions are not available until Windows launches Using the Touchpad EI Using the Touchpad The keyboard contains a cursor pointing device called a touchpad You can point to select drag and scroll objects on the screen using the built in touchpad CT Pointer Left button Actions Descriptions Point Slide one finger on the touchpad to place the pointer on an item or object Click Press the left button once Double click Press the left button twice Right click Press the right button once In many applications this action displays a shortcut menu of context sensitive choices Drag Slide one finger while pressing the left button Scroll Move your finger along the rig
13. driver or software title may correct the problem Use the Application Recovery CDs to reinstall individual applications or device drivers See Using the Application Recovery CD s on page 90 The System Recovery CD contains a backup copy of all the software originally installed on your hard disk drive It can be used only to recover the hard disk of the notebook computer you purchased The System Recovery utility gives you three options Q Full Restore without Format restores all the software titles that originally came with your computer without formatting the hard disk amp If you recover your operating system using the System Recovery CD Microsoft Word 2000 will not be recovered Use the supplied Word 2000 CD ROM to recover this application Q Full Restore with Format formats the hard disk drive and then restores all the original software Operating System Only restores the Windows operating system the notebook computer utility programs and the device drivers that shipped with your computer If you choose the Full Restore with Format or Operating System Only option your hard disk will be formatted which removes all the information on the hard disk drive You will lose any software you have installed and any other files you have created since you started to use your computer This means you will have to reinstall any applications that were not included with the computer when you purchased it If you choose the Full Res
14. in front of the monitor Setting Up Your VAIO Notebook Locating Controls and Connectors Front 1 Power indicator pages 14 19 8 Microphone 2 Battery indicator page 19 9 LCD screen pages 20 3 MG Memory Stick page 26 10 Keyboard page 16 4 Hard disk drive indicator page 19 11 Touchpad page 21 5 Num Lock indicator page 19 12 Power page 10 6 Caps Lock indicator page 19 13 Left right button 7 Scroll Lock indicator page 19 14 Speakers pages 20 85 EJ VAIO Notebook User Guide Back Battery connector page 11 Left 1 DC In connector page 10 2 Air vent 3 display VGA adapter output for connecting an external Y USB connector lt gt Memory Stick slot page 26 Memory Stick eject button Locating Controls and Connectors 9 Right 1 Headphone connector page 24 5 PC Card slot page 35 e 2 Microphone connector 6 i LINK IEEE 1394 5400 page 56 3 Jog Dial control page 38 7 Phone line jack page 46 4 PC Card eject button Bottom
15. not support this technology or operate at this speed Height measured at the thinnest point Height at the thickest point is 1 2 32 1mm Specifications are subject to change without notice 94 Index A AC adapter 10 75 AC power 10 adding hardware 45 peripherals 45 adjusting brightness 20 air circulation 76 Alt key 17 Application Recovery CDs 90 Applications key 17 B Batteries 78 battery pack 10 78 charging 12 connector 8 indicator light status 12 indicator lights 7 12 19 inserting 11 loading 11 power status 12 rechargeable 10 removing 13 battery power 10 brightness adjusting 14 20 built in speaker 7 20 volume 20 buttons Start 15 C cameras digital video recorder 56 canceling commands 17 Caps Lock 7 indicator light 19 CD media cleaning 78 handling 77 CD ROM discs cleaning 78 handling 78 inserting 54 CD ROM drive closing lid 55 connecting 35 53 troubleshooting 84 using 53 CD RW 53 charge status indicator light 12 charging battery pack 12 choosing power source 10 Cleaning Your Notebook 79 cleaning CD media 78 DVD media 78 cleaning computer 76 coin operated telephones 46 computer cleaning 76 condensation 77 lithium ion battery vi setting up 7 95 96 VAIO Notebook User Guide starting 14 troubleshooting 81 86 unpacking 2 connecting CD ROM drive 35 53 coin operated telephones 46 digital video camera recorder 56 floppy disk drive 33 multiple ph
16. numeric keypad are active The letters appear in uppercase as you type The Shift key lowers the case of typed letters when Caps Lock is on The screen scrolls differently Exactly how it scrolls depends on the specific application It has no effect in many applications Off The hard drive is not being accessed The character keys in the keypad area are active Letters appear in lower case as you type unless you hold down the Shift key Information moves across the display normally 20 VAIO Notebook User Guide Combinations and Functions with the Fn Key Combinations Feature Fn 1 ESC System Suspend Fn 1X F3 Speaker switch Fn a F4 Speaker volume Fn F5 Brightness control Fn F7 Switch to the external display Fn F12 System Hibernation Fn B Mega Bass switch Fn S System Idle Functions Puts the system into System Suspend mode a power management state To return the system to the active state press any key or press the power switch on your computer Toggles the built in speaker off and on Adjusts the built in speaker volume To increase volume press Fn F4 then or To decrease volume press Fn F4 then or Adjusts the brightness of the LCD To increase light intensity press Fn F5 and then T or gt To decrease light intensity press Fn F5 and then dore Toggles through the LCD external display connected to the Monitor
17. to the next Escape ke The Esc Escape key is used to cancel commands pe xey P y Using the Keyboard 17 Key Description Print Screen key The Print Screen key takes an electronic snapshot of the screen and places it in the Windows Clipboard You can then paste the screen shot into a document and print it Operator keys Several keys are always used with at least one other key Ctrl Alt and Shift When held down with another key the Ctrl Control and Alt Alternate keys offer another way to give commands For example in many applications instead of choosing the Save command from a menu you can hold down Ctrl and press S referred to as Ctrl S The Shift key operates the same way as on a typewriter it is used to produce capital letters or special symbols such as and Windows key The key with the Windows logo displays the Windows Start menu it is the equivalent of clicking the Start button on the task bar See Combinations and Functions with the Windows Key on page 18 Fn key The Fn key is used in combination with other keys to issue commands The Fn keys at the left and right sides both work the same See Combinations and Functions with the Fn Key on page 20 Applications key The Applications key displays a shortcut menu of context sensitive choices pressing this key is the Es equivalent of clicking the right mouse button KEJ VAIO Notebook User Guide Combinations and Functions with the W
18. using does not support the Jog Dial control you can still perform the following functions Action Description Maximize Window Press the Jog Dial control button to maximize the size of the active window Press again to return to normal window size Minimize Window Press the Jog Dial control button to minimize the size of the active window Press again to return to normal window size Finish Window Press the Jog Dial control button to close the active application Scroll Press the Jog Dial control button to begin scrolling within the active window Jog Dial Launcher Press the Jog Dial control button to return the Jog Dial control to Jog Launcher mode Menu Bar Press the Jog Dial control button then use the Jog Dial control to scroll through the active window s toolbar Some software does not support these functions Using the Jog Dial Control Using a Dialog Box When a window such as Screen Properties is active the Dialog box is displayed in the Jog Dial window You can select an item in the window by rotating the Jog Dial control Pressing the Jog Dial control is the equivalent of pressing Enter 42 VAIO Notebook User Guide Using Smart Connect The preinstalled Smart Connect software allows you to use an i LINK cable optional to connect your VAIO notebook to another VAIO computer that also has Smart Connect You can then use one computer to copy delete and edit files on the other computer You
19. you may be prompted to insert your ARCD after restarting Windows Insert the ARCD to automatically complete recovery of your system If your computer does not start from the Recovery CD 1 Slide the power switch forward and hold it for more than four seconds to turn off the computer 2 Turn on the computer and press the F2 key when the Sony logo appears The BIOS setup menu screen appears 3 Press the arrow keys to select the Exit menu Press the arrow keys to select Get Default Values and then press the Enter key The message Load default configuration now appears 90 VAIO Notebook User Guide 5 Check that Yes is selected then press the Enter key Press the arrow keys to select Exit Save Changes and then press the Enter key The message Save configuration changes and exit now appears Check that Yes is selected then press the Enter key The computer restarts from the Recovery CD Using the Application Recovery CD s The Application Recovery CDs allow you to reinstall individual applications and device drivers if they are corrupted or accidentally erased Reinstalling an individual device driver or software title may correct a problem you are experiencing with your computer and you may not need to recover the entire contents of your hard drive If you do need to reinstall all the software titles that shipped with your computer use the System Recovery CD See Using the System Recovery CD s on pag
20. your display for details Moisture condensation may have occurred Do not use the computer for at least one hour and then turn on the computer D 81 82 VAIO Notebook User Guide When I turn on my computer the message Operating system not found appears and Windows does not start Check the floppy disk drive to see if a non bootable diskette is in the drive If a non bootable diskette is in the drive turn off the computer remove the diskette and then turn on the computer again Confirm that Windows starts properly If Windows still does not start follow the procedure below to initialize the BIOS If the floppy disk drive is empty or contains a bootable diskette use the following procedure to initialize the BIOS 1 Remove the floppy disk drive port replicator PC card and any other peripheral devices from the computer 2 Turn the computer off and then turn it on again 3 Turn on the computer and press the F2 key when the Sony logo appears The BIOS setup menu screen appears 4 Press the arrow keys to select the Exit menu 5 Press the arrow keys to select Get Default Values and then press the Enter key The message Load default configuration now appears 6 Check that Yes is selected then press the Enter key 7 Press the arrow keys to select Exit Save Changes and then press the Enter key The message Save configuration changes and exit now appears 8 Check that Yes is selecte
21. B connector I cannot use DV devices and messages appear on the screen 2 Check that the DV device is turned on and that the cables are properly connected Q If you are using multiple i LINK devices the combination of the connected devices may cause unstable operation In this case turn off the power to all connected devices and disconnect unused devices Check the connection then turn on the power again My computer does not shut down It is best to shut down your computer using the Shut Down command on the Windows Start menu Using other methods including those listed here may result in loss of unsaved data If the Shut Down command does not work properly follow these steps Q Restart the computer by pressing Ctrl Alt Delete If this does not work slide the power switch forward and hold it for four seconds Unplug the computer from the AC adapter and remove the battery pack from your computer My PC card is not working Make sure the PC card is compatible with Windows Q Use the Sony Notebook Setup utility to disable devices you are not currently using When I remove the Memory Stick media an error message appears Insert the media into the slot again and press the Enter key Wait until the active application finishes then remove the media If the message confirms eject of the media click OK Power Management The operating system may become unstable if a lower power state such as system hibernation is initiated
22. SONY VAIO Notebook User Guide PCG SR5K PCG SR7K LEO Notice to Users 2000 Sony Electronics Inc All rights reserved This manual and the software described herein in whole or in part may not be reproduced translated or reduced to any machine readable form without prior written approval SONY ELECTRONICS INC PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL THE SOFTWARE OR SUCH OTHER INFORMATION IN NO EVENT SHALL SONY ELECTRONICS INC BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES WHETHER BASED ON TORT CONTRACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF Sony Electronics Inc reserves the right to make any modification to this manual or the information contained herein at any time without notice The software described herein is governed by the terms of a separate user license agreement This product contains software owned by Sony and licensed by third parties Use of such software is subject to the terms and conditions of license agreements enclosed with this product Some of the software may not be transported or used outside the United States Software specifications are subject to change without notice an
23. Sony notebook Record the serial number in the space provided here Refer to the model and serial number when you call your Sony Service Center Model Number PCG 3102 PCG 3112 Serial Number WARNING To prevent fire or shock hazard do not expose your notebook to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only i Never install modem or telephone wiring during a lightning storm L Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations i Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface Use caution when installing or modifying telephone lines Avoid using the modem during an electrical storm Do not use the modem or a telephone to report a gas leak in the vicinity of the leak A socket outlet should be as close as possible to the unit and easily accessible oO AVERTISSEMENT Pour pr venir tout risque d incendie ou d lectrocution garder cet appareil l abri de la pluie et de l humidit Pour pr venir tout risque d lectrocution ne pas ouvrir le ch ssis de cet appareil et ne confier son entretien qu une personne qualifi e J Ne jamais effectuer l installation de fil modem ou t l phone durant un orage lectrique L Ne jamais effectuer l installation d une prise t l phonique dans un endroi
24. able from the rear of the computer and that the modular jack clicks into place 3 Plug the other end into the wall jack Phone cable optional Your computer does not work with party lines cannot be connected to a coin operated telephone and may not work with multiple phone lines or a private branch exchange PBX Some of these connections might result in excess electrical current and could cause a malfunction in the internal modem Connecting the Internal Modem to the Telephone Line 47 Connecting the Internal Modem to the Telephone Line The computer comes with an internal fax modem that allows you to exchange data by faxing through the Internet or faxing by connecting the computer to the telephone line using a phone cable optional The maximum communication speed of the internal modem V 90 56K is 56 Kbps for data reception and 33 6 Kbps for data transmission This speed may vary depending on the line conditions Note The internal fax modem can only be connected to a subscriber telephone line Do not connect it to a PBX Private Branch Exchange Connecting to the PBX may cause a major system malfunction Check the dialing mode of your telephone by pressing any button on your telephone while holding the receiver off the base unit If you hear a tone sound your dialing mode is the tone mode If you hear a click sound your dialing mode is the pulse mode If you have a rotary type telephone your dialing mode is a
25. and then changed before the operating system completely enters the lower power state To restore the computer to its normal operating stability close all open applications and slide the power switch forward and hold it there for four seconds or more to completely shut down the computer Getting Help 87 Getting Help Sony provides several support options for your Sony computer When you have questions about your computer and the preinstalled software check these sources for answers in the following sequence 1 Read Me First User Guide Electronic Documentation Manuals and online help files that may accompany your preinstalled software Knowledge Database Sony Fax on Demand Software Updates Contains Frequently Asked Questions the most up to date information on using your computer and software support information Explains how to use your notebook computer and peripheral devices and solve common problems Also includes product specifications Read Me First and the User Guide are also available electronically on your hard drive along with two additional documents Customizing Your VAIO Notebook and Troubleshooting Help You can access this electronic documentation from the Windows Start menu by selecting Programs VAIO Documentation Most of the manuals for preinstalled software are located on your hard disk drive as online help files You can access the online help files from the Help menu in the sp
26. ar click the Start button click Shut Down and then click Restart the computer If you cannot restart as described in the preceding step you can restart the computer by pressing Ctrl Alt Delete Q If Ctrl Alt Delete does not work slide the power switch toward the front and hold it for four seconds This turns off the power Q If your computer locks up while playing a CD ROM stop the CD ROM and restart the computer by pressing Ctrl Alt Delete Pressing Ctrl Alt Delete or turning off the computer with the power switch may result in data loss in files that are currently open My software program locks up or crashes Contact the software publisher or designated provider for technical support 84 VAIO Notebook User Guide My printer doesn t function after the computer resumes from a power saving mode When this occurs follow the procedures below to reset the printer connection 1 Right click the My Computer icon on the desktop and then select Properties 2 Click the Device Manager tab 3 Select Refresh and then click OK The printer should now function properly I cannot play a CD Make sure the label of the CD is facing up If the CD requires software make sure the software is installed according to the program s instructions Moisture condensation may have occurred Disconnect the CD ROM drive and disconnect the power to the drive for at least one hour Q Make sure the CD ROM drive is prope
27. cccccceeesssseeeseeeeeees 45 Connecting a Phone Life ass 46 Connecting the Internal Modem to the Telephone Line 47 Notes on the Telephone Line ss 50 Connecting to the Local Area Network LAN 51 Using Ethernet to Connect to a Network 51 Setting Up Your Ethernet Connection 52 Connecting the CD CDRW DVD Drive optional 53 Connecting an LINK denis su 56 Connecting a Universal Serial Bus USB Device 58 To Connect a USB Device nn 58 HC BI Connecting an External Display sen 59 To Connect a Monitor 59 To Connect a TOj CLIO cn xJ saei 60 Adding MEMOTY x 4 4s ineke l kin serkeekekeke litre noie 61 Installing a Memory Module 61 Confirming Added Memory Capacity 66 About Your Software inerte 67 MovieSha er cco scans scicsanavtnansasecaussavstvanuiesvasobedtasasstaslanescubeabeitae 67 Importing Images and Sound Clips E r rrneke 67 Create a Movie using Shaker 69 Editing Clips and Scenes ss 70 Saving MOV E assise coast araia asara E E aSa E ESEE ana Sasia 71 Pict ureGeap RNA Eii aea RNN enese 72 Managing Your Pictures E rere ekere kereke kk kek rek 72 Creating a Photo Album oo cn diy ka n kerika iisi en 72 Using Panorama Maker s gt ked Ayn nii yan ce k be NAN N 73 Making Still Images and Panoramic from MPEG 73 NOTES ON USE emisna
28. concernant les exigences techniques relatives au mat riel terminal Le Minist re n assure toutefois pas que le mat riel fonctionnera a la satisfaction de l utilisateur Avant d installer ce mat riel l utilisateur doit s assurer qu il est permis de le raccorder aux installations de l entreprise locale de t l communication Le mat riel doit galement tre install en suivant une m thode accept e de raccordement L abonn ne doit pas oublier qu il est possible que la conformit aux conditions nonc es ci dessus n emp che pas la d gradation du service dans certaines situations Les r parations de mat riel homologu doivent tre coordonn es par un repr sentant d sign par le fournisseur L entreprise de t l communications peut demander a l utilisateur de d brancher un appareil a la suite de r parations ou de modifications effectu es par l utilisateur ou a cause de mauvais fonctionnement Pour sa propre protection l utilisateur doit s assurer que tous les fils de mise la terre de la source d nergie lectrique des lignes t l phoniques et des canalisations d eau m talliques s il y en a sont raccord s ensemble Cette pr caution est particuli rement importante dans les r gions rurales Avertissement L utilisateur ne doit pas tenter de faire ces raccordements lui m me il doit avoir recours un service d inspection des installations lectriques ou un lectricien selon le
29. criber telephone line of the local telephone company Ask the manufacturer of your PBX or your PBX maintenance agent for compatibility The internal modem of your computer is set to hang up if the called party does not answer within 60 seconds You may change this length to less than 30 seconds which however may prevent a connection from being established due to some delays caused by the telephone switch It is advised to set the length to 30 seconds or more If your Internet service provider supports V 90 or 56K communications of up to 56 Kbps are available This however may vary depending on the telephone line condition If you use a splitter to branch the telephone line the internal fax modem may not operate successfully Select the appropriate mode adopted in your country You can select it from the Modem Properties dialog box Connecting to the Local Area Network LAN EI Connecting to the Local Area Network LAN You can connect your computer to 10BASE T and 100BASE TX type networks For the detailed settings and devices needed to connect to the network please ask your system manager Warning Only connect 10BASE T and 100BASE TX cables to the Ethernet network port Do not connect any other type of network cable or any telephone line Connecting cables other than those listed above may result in an electric current overload and could cause a malfunction excessive heat or fire in the port To connect the uni
30. crophone echo From the Start menu select Settings and click Control Panel In the Control panel double click YAMAHA DS XG 2 Select the Echo tab Recording from a microphone or audio equipment 25 3 Click Effective you can also customize the setting by choosing options such as Time 4 Click OK When recording or using microphone echo some software options may not be available To effect the MIDI sound From the Start menu select Settings and click Control Panel 2 Inthe Control panel double click YAMAHA DS XG 3 Select the Sysnth tab 4 Select the desired effect and then click OK To adjust the sound volume when recording double click QE in the task tray located in the lower right corner of the Desktop window 1 From the Options menu select Properties 2 Inthe Volume Adjust window select Recording and then click OK The Recording Control window appears You can adjust the sound using the Smart Label software included or the sound recorder Sound device Function Telephony Adjust the modem or telephone line sound Microphone Adjust the internal or external microphone sound Line Adjust the audio equipment sound volume CD Audio Adjust the digital sound volume of CD of the CD ROM drive PCGA CD51 optional Stereo Out Adjust the sound from Volume Control The bass boost function does not work 26 VAIO Notebook User Guide Using Memory Stick Media This new compact portable a
31. crophone or audio equipmeni 23 Switching the connector functionality E mreeee 23 x VAIO Notebook User Guide Using Memory Stick Media secret 26 Types of Memory Stick Media ccccccesesseteseeceseteseeeeneesesnenenenes 26 Handling and Storing Memory Stick Media 27 Inserting a Memory Stick Media E EE rere rkek keke 28 Removing a Memory Stick Media rrr eke 29 Using MG Memory Stick Media with Data from Another DEVICE meden yn dune din ky etai tisser deyan later 30 Write Protecting a Memory Stick Media 30 Formatting a Memory Stick Media 31 LIN Ga ira PN DN kK ns 32 Using a Floppy Disk Drive optional 33 Using PC CaS sen nan H KA EEEE EHA Hek HARRAN 35 VAIO Actl n RD 38 The Jog Dial M Controleur 38 Using the Jog Dial CON HOlLS esse 39 Launcher Modes insistent 39 Guide IOC de ed en ee 40 Using the Jog Dial Control with Sony Software 40 Using the Jog Dial Control with Other Software 40 Using Smart CONNECt sensies siesti neiet eaaa Eisai 42 Using Power Saving Modes uEmrrmrre reee eee kereke ke 43 Normal Mode sess 4a tose se aisvadtescvess vest k dia k Ne GEM b ni Ez ya 43 System Jdl M de sssrinin ks ye nes 43 System Suspend Mode 44 System Hibernation Mode 44 Connecting Peripheral Devices cccccc
32. d then press the Enter key The computer restarts When I turn on my computer the message C WINDOWS appears and Windows does not start Q Enter win then press the Enter key When the message MS DOS is activated Do you want to return to Windows and restart applications appears press the Enter key again Windows starts When shutting down your computer follow the procedure in Shutting Down Your Computer on page 15 Windows should start automatically the next time you turn on your computer Troubleshooting 83 My LCD does not display anything Q Check that the computer is plugged into a power source and that it is turned on Check that the power indicator on the front panel of the computer is on Check that the battery pack is inserted properly and that it is charged The computer may be in LCD Video Standby mode Press any key to activate the display Q The video output may be directed to an external display attached to the port replicator Press Fn F7 until video output appears on the LCD The window I have just closed continues to appear on my LCD Press the Windows key and the D key twice to refresh the screen The screen image on my external display is not centered or sized properly Use the controls on your external display to adjust the image See the manual supplied with your display for more information My computer locks up Try restarting the computer On the Windows taskb
33. d may not necessarily be identical to current retail versions Updates and additions to software may require an additional charge Subscriptions to online service providers may require a fee and credit card information Financial services may require prior arrangements with participating financial institutions As an ENERGY STAR Partner Sony Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment The program backs the development and dissemination of products with functions that effectively reduce energy consumption It is an open system in which business proprietors can participate voluntarily The targeted products are office equipment such as computers displays printers facsimiles and copiers Their standards and logos are uniform among participating nations ENERGY STAR is a U S registered mark Sony i LINK VAIO the VAIO logo MagicGate PictureGear DVgate Jog Dial Handycam Memory Stick and the Memory Stick logo are trademarks of Sony Corporation MS DOS Windows and the Windows 2000 logo are registered trademarks of Microsoft Corporation All other trademarks are trademarks of their respective owners Owner s Record The model number and serial number are located on the bottom of your
34. d of data processing especially when several software applications are open at the same time Sony recommends memory upgrades be performed by an authorized Sony Service Center or Sony authorized agent To find the nearest center or agent see http www sony com pcsupport Be advised that memory upgrades performed by end users will void the warranty of this computer The following procedures assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment The components inside the computer are extremely delicate To avoid damage to the computer proceed carefully when removing or installing memory modules You can add up to 256 MB of memory on the PCG SR5K PCG SR7K by installing optional memory modules To upgrade memory use only a PC 100 SDRAM microDIMM with gold lead contacts Memory modules and other Sony computer supplies accessories and peripherals can be purchased from an authorized Sony dealer or by contacting Sony at http www sonydirect com notebookaccessories D Installing a Memory Module The computer is equipped with two memory slots You can expand the memory in both slots up to a maximum of 256 MB The PCG SR5K has 64 MB of memory preinstalled in one slot with the second slot open for upgrading You can install an additional 64 MB of memory in the second slot or remove the pr
35. e 88 You must be in Windows to run the Application Recovery CDs The application will not run from MS DOS If you have any questions on using the Application Recovery CDs contact Sony Customer Support Some applications on the Application Recovery CDs must be decompressed before the installation process begins Your screen does not change while the files are decompressed The time to decompress an application varies and may be as long as 30 minutes To use the Application Recovery CD s 1 Turn on your computer If your computer is already on close all applications 2 When the Windows desktop appears insert the first Sony Application Recovery CD in the CD ROM drive The Application Recovery utility loads automatically 3 When the Application Recovery menu appears follow the on screen instructions to complete the recovery process Your system may include one or two Application Recovery CDs If you have two Application Recovery CDs insert the first CD to run the Application Recovery program You may be prompted to insert the second CD depending on the application you wish to restore Using the System and Application Recovery CDs EI Hard Drive Partition In order to improve the performance of your computer s DVgate Motion software the hard disk drive on your computer has been formatted with two partitions C and D DVgate Motion saves files to the D partition This prevents large video captures from consuming the ava
36. e Memory Stick media do not force the media into the slot To confirm that the Memory Stick media is inserted correctly check the Removable Disk S drive To check the drive Double click the My Computer icon on the desktop 2 Check that the Removable Disk S icon is displayed in the My Computer window 3 Double click the Removable Disk S icon to display the contents of the Memory Stick media Using Memory Stick Media 29 Removing a Memory Stick Media 1 Ensure that the Memory Stick media indicator light is off 2 Pushin the Memory Stick media eject button 3 When the button ejects push it again and remove the Memory Stick media Media eject button Large image files require more time to load to a Memory Stick media EJ VAIO Notebook User Guide Using MG Memory Stick Media with Data from Another Device Memory Stick media can be used with compatible devices like a Sony digital video camera recorder or digital still camera Insert the media into the Memory Stick media slot and save your movie or still image as data files to the Memory Stick media Use Sony s PictureGear software preinstalled with your notebook to move the files to a Memory Stick media For more details on using compatible devices with MG Memory Stick media refer to the instructions that came with your compatible device or use PictureGear Help Write Protecting a Memory Stick Media Memory Stick media is designed with a wr
37. e PC card release button up away from the computer and push it in towards the computer Release button 2 Remove the PC card slot protector Eq VAIO Notebook User Guide 3 Insert the PC card into the PC card slot front label facing up Gently push the card into the slot until the card is fixed into the connector The release button comes out J Insert with the arrow facing forward PC card Do not force a card into the slot It may damage the connector pins If you have difficulty inserting a card check that you are inserting the card with the correct orientation See the manual that came with your PC card for more information on its use To Remove a PC Card For some PC cards if you alternate between normal power operation and the System Suspend or System Hibernation power management modes while the card is inserted you may find that a device connected to your system is not recognized Reboot your system to correct the problem 1 Close any applications that use the PC card otherwise data may be lost 2 Click the PC card icon in the taskbar and close the card Using PC Cards EA 3 Pull the PC card release button up and press it in towards the computer LIT LIL LITT 2 FIGLIO ET LEFT ES lt 4 Gently grasp the card and pull it out Release button 5 Insert the PC card slot protector into the empty slot EJ VAIO Notebook User Guide VAIO Action Setup VAIO Action Setup manages t
38. e operating it any further Do not drop the computer or place heavy objects on top of the computer Setup Q Do not place your computer in a location subject to e Heat sources such as radiators or air ducts Direct sunlight Excessive dust Moisture or rain Mechanical vibration or shock Strong magnets or speakers that are not magnetically shielded Ambient temperature of more than 95 F 35 C or less than 40 F 5 C High humidity Do not place electronic equipment near your computer The computer s electromagnetic field may cause a malfunction Provide adequate air circulation to prevent internal heat build up Do not place your computer on porous surfaces such as rugs or blankets or near materials such as curtains or draperies that may block its ventilation slots Leave a space of at least 8 inches behind the back panel of the computer Notes on Use 77 Q The computer uses high frequency radio signals and may cause interference to radio or TV reception Should this occur relocate the computer a suitable distance away from the set Q Use only specified peripheral equipment and interface cables otherwise problems may result Do not use cut or damaged connection cables Q Your computer will not work with party lines cannot be connected to a coin operated telephone and may not work with multiple phone lines or a private branch exchange PBX Ifthe telephone company makes a service call to your
39. ecific application A printed manual is available for some applications Provides instant access to information on commonly encountered problems Enter a description of your problem and the Knowledge Database searches for the corresponding solutions online You can access the Sony Knowledge Database at http www sony com pcsupport This service provides you with answers to commonly asked questions You can use this automated service to request a list of available topics and then select the topics that you want to receive To contact the Sony fax on demand service call 1 888 4SONYPC 1 888 476 6972 Requires a fax machine or your fax software You can download the latest software updates and software patches for your Sony computer by selecting Software Updates on the Sony PC Support web page at http www sony com pcsupport EJ VAIO Notebook User Guide Using the System and Application Recovery CDs The following sections describe how to use the System Recovery and Application Recovery utilities You need to connect the optional PCGA CD51 CD ROM drive the PCGA CDRW51 or the PCGA DVD51 drive to use the System and Application Recovery CDs Using the System Recovery CD s You can reinstall software titles that shipped with your computer if they are corrupted or accidentally erased You may not need to recover the entire contents of your hard drive If you experience a problem with your computer reinstalling an individual device
40. einstalled 64 MB of memory and install 128 MB in each slot The PCG SR7K has 64 MB of memory preinstalled in each of the slots for a total of 128 MB You can remove those modules and replace them with 128 MB in each slot for a total of 256MB Warning Be careful when adding memory Mistakes when installing or removing a memory module may cause a malfunction Observe proper safety precautions when installing modules in your computer 62 VAIO Notebook User Guide To avoid damage to a memory module from static electricity follow these guidelines Q Avoid handling and installing memory modules where static electricity can easily be generated for example on a thick carpet Q Before you pick up or touch a memory module ground yourself by touching a metal surface with your hand This will discharge static electricity that has accumulated on your body Do not remove a memory module from its protective package until you are ready to install it The package protects the module from electrostatic discharge Store a memory module in its protective package or wrap it in aluminum foil To install a Memory Module 1 Turn off the computer and all peripheral devices Disconnect the power cord and all cables from the computer and then remove the batteries The interior of the notebook becomes extremely hot during operation Wait at least one hour for the computer to cool down before you remove the screws Use a precision Ph
41. ess other entity or individual sending the message and the telephone number of the sending machine or such business other entity or individual In order to program this information into your facsimile machine see your fax software documentation Telephone Consumer Guidelines Canada Please refer to your telephone directory under Privacy Issues and or Terms of Service For more detailed information please contact CRTC Terrasses de la Chaudi re Tour centrale 1 promenade du Portage 5 tage Hull PQ K1A ON2 This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada DISPOSAL OF LITHIUM ION BATTERY You can return your unwanted lithium ion batteries to your nearest Sony Service Center or Factory Service Center In some areas the disposal of lithium ion batteries in household or business trash may be prohibited For the Sony Service Center nearest you call 1 888 476 6972 in the United States or 1 800 961 7669 in Canada Do not handle damaged or leaking lithium ion batteries Ne pas manipuler les batteries au lithium ion qui fuient ou sont endommag es Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used batteries according to the manufacturer s instructions Une batterie non conforme pr sente u
42. g the CD drive may vary depending on the CD drive See the manual that came with your CD drive for more information on use To play an audio CD in the optional PCGA CD51 CD ROM drive with your notebook your computer s settings must be set properly You can check the settings as follows 1 Click the Start button select Settings and click Control Panel 2 Click the Multimedia icon 3 Click the CD tab and make sure the Enable digital CD audio for this CD ROM device box is checked When this box is checked your notebook computer s settings are correct for playing an audio CD in the PCGA CD51 CD ROM drive To Connect the CD Drive You can connect a PCGA CD51 CD ROM drive or PCGA CDRW51 CD RW drive while the computer is on unless you want to use the System and Application Recovery CDs Turn off your computer before using the System and Application Recovery CDs 1 Remove the PC card slot protector from the PC card slot See Using PC Cards on page 35 for details 2 Remove the PC card from the bottom side of the CD drive EJ VAIO Notebook User Guide 3 Insert the PC card into the PC card slot with the SONY logo facing up See Using PC Cards on page 35 for details A protective cover is attached to the lens of the CD ROM drive at the factory Before using the CD ROM drive remove the protective cover To Insert a Disc 1 Press the Eject button The disc tray slides out Eject button 2 Place t
43. h precision technology You may however see tiny black points and or bright points red blue or green that continuously appear on the LCD This is a normal result of the manufacturing process and does not indicate a malfunction The AC Adapter Your computer operates on 100V 240V AC 50 60 Hz Do not share the AC outlet with other power consuming equipment such as a copying machine or shredder You can purchase a power strip with a surge protector This device prevents damage to your computer caused by sudden power surges such as those that may occur during an electrical storm Do not place heavy objects on the AC adapter or its cord 75 76 VAIO Notebook User Guide D OO To disconnect the cord pull it out by the plug Never pull the cord itself Unplug your computer from the wall outlet if you will not be using the computer for a long time When the AC adapter is not used unplug it from the AC outlet Use only the AC adapter supplied Do not use any other AC adapter Handling Your Notebook Q Clean the cabinet with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine as these may damage the finish of your computer Should any solid object or liquid fall into the computer shut down your computer and then unplug it You may want to have the computer checked by qualified personnel befor
44. he disc in the tray with the label side facing up Push the disc onto the hub until the disc clicks into place Connecting the CD CDRW DVD Drive optional 55 3 Close the tray by pushing it gently The BUSY indicator on the drive flashes while your computer is reading data from the disc Busy indicator To Remove the Drive Remove the PC card from the computer See Using PC Cards on page 35 for details EJ VAIO Notebook User Guide Connecting an i LINK device Your VAIO notebook includes an i LINK IEEE 1394 connector which you can use to connect to an i LINK device such as a digital video camera recorder To connect a Digital Video Camera Recorder Plug one end of an i LINK cable into the S400 connector on the left side of the computer and the other end into the DV In Out connector on the digital video camera recorder If your digital video camera recorder includes a Memory Stick slot you can copy images from it to your computer via a Memory Stick media Copy images to the Memory Stick media and insert the media into the Memory Stick slot on your computer For details on using Memory Stick see Using Memory Stick Media on page 26 SSE A LEE Za to Sano LD LEZ r r225 LEFT ZE EE ii Y Digital video camera recorder i LINK cable optional Connecting an i LINK device EA The Sony digital video camera recorder is pictured your digital video camera
45. he images you want to use We recommend 12 landscaped or 16 portrait pictures 3 From the Utilities menu select Panorama Maker 4 Select the correct lens and click Okay If 35mm lens is selected the prompt does not appear to select a different lens click the lens icon Click the panoramic icon near the bottom of the window Click Full Stitch Making Still Images and Panoramic from MPEG 1 Select the MPEG file 2 From the Movie Sound menu select Scene break down 3 Then select Movie Stitch to create a panoramic picture 74 VAIO Notebook User Guide Notes on Use This section describes safety guidelines and precautions to help protect your computer from potential damage Handling the LCD Screen Do not leave the LCD facing the sun as it can damage the LCD Be careful when using the computer near a window Do not scratch the LCD or exert pressure on it This could cause malfunction Using the computer in low temperature conditions may produce a residual image on the screen This is not a malfunction When the computer returns to normal temperature the screen returns to normal A residual image may appear on the screen if the same image is displayed for a lengthy period of time The residual image disappears in a while You can use a screen saver to prevent residual images The screen becomes warm during operation This is normal and does not indicate a malfunction The LCD is manufactured using hig
46. he settings for your computer s Jog Dial control Memory Stick media and i LINK interface An overview of some of the functions controlled by VAIO Action Setup is provided below For more information on changing the settings using VAIO Action Setup right click the Jog Dial control icon B or D in the task tray and click Help Topics The Jog Dial Control Your computer is equipped with a Jog Dial control on the right side of the unit The Jog Dial control enables you to open an application folder or document from a predefined list by rotating and pressing the Jog Dial control In addition when you press the Jog Dial control you can turn on your computer automatically and start the selected application or document Jog Dial control The Jog Dial control window always appears in the display It is either in the launcher mode or in the guide mode Using the Jog Dial Control EJ Using the Jog Dial Control This section explains how to use the Jog Dial control For information on how to change the Jog Dial control s settings right click the Jog Dial control icon in the task tray and click Help Topics Launcher Mode The Jog Dial control window is in launcher mode until a software application is launched or the Jog Dial control window becomes active When an arrow is displayed next to an item in the Jog Dial control window you can display a submenu of that item by selecting it and pressing the Jog Dial control button
47. home or office and determines that your computer is responsible for a problem the telephone company may bill you for the service call Also if you do not disconnect your computer when it is adversely affecting the telephone line the telephone company has the right to disconnect your service until you correct the problem On Moisture Condensation If the computer is brought directly from a cold location to a warm one moisture may condense inside your computer In this case allow at least an hour before turning on your computer If any problems occur unplug your computer and contact your Sony Service Center Handling Diskettes Do not open the shutter manually and touch the surface of the diskette Q Keep diskettes away from magnets Q Keep diskettes away from direct sunlight and other heat sources Handling CD or DVD Media Do not touch the surface of the disc Do not drop or bend the disc 78 VAIO Notebook User Guide Cleaning CD or DVD Media Fingerprints and dust on the surface of a disc may cause read errors Proper care of the disc is essential to maintain its reliability Do not use solvents such as benzine thinner commercially available cleaners or anti static spray as they may cause damage to the disc For normal cleaning hold the disc by its edge and use a soft cloth to wipe the surface from the center out Ifthe disc is badly soiled moisten a soft cloth with water wring it out well and u
48. ht edge of the touchpad to scroll vertically Move your finger along the bottom edge to scroll horizontally The scroll function is available only with applications that support a touchpad scroll feature See Mouse Properties for information on touchpad features such as clicking both buttons simultaneously adjusting touchpad speed Web Assist Tap Off and Easy Launcher functions To access Mouse Properties click the Start button on the Windows taskbar point to settings and then click Control Panel Double click the Mouse icon in the Control Panel 22 VAIO Notebook User Guide Using Smart Pad Smart Pad is an application that lets you create memos by writing on the touchpad using your finger To use Smart Pad 1 Click the Start button on the Windows taskbar 2 Point to Programs point to Smart Utilities and then click Smart Pad Smart Pad enters tablet mode In this mode the touchpad corresponds with the Smart Pad screen For example when you write letters on the left corner of the touchpad the letters appear on the left corner of the screen 3 To write move your finger slowly on the touchpad while holding down the left mouse button As you write the letters you wrote on the touchpad appear on the screen in the corresponding location Click Help on the Smart Pad screen to display the Help file Recording from a microphone or audio equipment 23 Recording from a microphone or audio eguipment You can reco
49. ialog displays Select the hardware device you wish to remove by clicking it Click Stop Confirm the correct device is selected in the Stop a hardware device dialog box The message Floppy Disk Drive can now be safely removed from the system appears Click OK Slide the release lever on the botton of the computer in the direction of the arrow and then unplug the floppy disk drive from the computer To carry a floppy disk drive Fold the floppy disk cable into the compartment on the side of a floppy disk drive Using PC Cards ES Using PC Cards Your computer includes a PC card slot PC cards allow you to connect portable external devices such as a CD ROM drive The PC card slot can accommodate one Type or Type II PC card This slot is compatible with 16 bit card and Card Bus ZV Zoomed Video port is not available Some PC cards may require that you disable idle devices when using the PC card You can use Sony Notebook Setup to disable devices See Displaying the Sony Notebook Setup Screen in the online manual Customizing Your VAIO Notebook for details Be sure to use the most recent software driver provided by the PC card manufacturer a If an mark appears on the Device Manager tab in the System Properties dialog box remove the software driver and then reinstall it To Insert a PC Card You do not need to shut down the computer before inserting or removing a PC card 1 Pull th
50. ilable space on your C partition To maintain optimum performance of DVgate Motion you should defragment your D partition regularly See the DVgate Motion online help for more information See Specifications on page 92 92 VAIO Notebook User Guide Specifications Model Processor Hard Disk Drive C D Partition Standard RAM LCD Screen L2 Cache Memory MPEG Graphics Sound Capabilities Modem Infrared Expansion Capabilities Built in Capabilities Telecommunication Capabilities Connection Capabilities Supplied Accessories Power Requirements Power Management Battery Dimensions Weight Operating Temperature PCG SR5K PCG SR7K 500 MHz Intel 600 MHz Intel Pentium III Pentium III with Intel SpeedStep technology 9 GBI 12 GBt Approx 70 and 30 Approx 70 and 30 64 MB SDRAM 128 MB SDRAM expandable to 256 MBtt expandable to 256 MBtt 10 4 SVGA TFT 10 4 XGA TFT 256 KB on CPU MPEG Digital Video supports full screen playback 128 bit accelerator with 128 bit accelerator with 3 MB Video RAM 6 MB Video RAM 16 bit CD quality stereo sound 56K and V 90 compatible modemit Supports 4 mbps 1 1 mbps and 115 kbps IrDA Standard One PCMCIA type II Slot Card Bus support Microphone Stereo speakers Touchpad Data fax send receive Phone line RJ 11 i LINK IEEE 1394 1 USB port Microphone In DC In Headphone MagicGate Memory Stick VGA display wi
51. illips screwdriver that matches the size of the screw heads to remove the 6 screws marked on the bottom of the computer To avoid damaging the computer do not remove or loosen any other screws Adding Memory 63 3 Open the display panel raise the palm rest toward you turn it over and then set it gently on the keyboard When you turn the palm rest over gently perform the action in order to avoid breaking the attached cable Palm rest 7 Palm rest on keyboard 4 Before you remove the module from its package touch a metal part of the computer to discharge any static electricity accumulated on your body Remove the module from its protective package 5 Install the memory module by holding the module edge connector pointing down with the notch on the right and then insert it diagonally into an empty slot Edge connector Notch 64 VAIO Notebook User Guide Lower the memory module until it clicks into place on both ends Do not touch any part of the motherboard or the other components inside the computer 6 Return the palm rest to its original position by aligning it with the notch on the keyboard and then setting it on the keyboard Handle the palm rest gently to avoid breaking the attached cable Close the display panel and replace the six 6 screws on the bottom of the computer Adding Memory 65 Use the Phillips screwdriver to tighten all
52. indows Key Combinations A F1 A Tab A E A F A Ctrl F A M Shift A M A R Fn Insert Functions Displays Windows Help Switches the selected button on the taskbar Displays Windows Explorer Displays the Windows Find All Files window to find a file or folder This is the equivalent of selecting Find and then Files or Folders from the Start menu Displays the Windows Find Computer window where you can locate other computers This is the equivalent of selecting Find and then Computer from the Start menu Minimizes all displayed windows Returns all minimized windows to their previous size Displays the Run window This is the equivalent of selecting Run from the Start menu Displays the Properties window This is the equivalent of clicking the System icon in the Control Panel Using the Keyboard 19 Indicators Indicators Power O Battery Functions Lights when the power to the computer is turned on Flashes in System Suspend mode Turns off when the computer is in System Hibernation mode or powered off Indicates the status of the battery attached at the rear of the computer MG Memo y Indicates the Memory Stick slot is in use Hard disk Num Lock Caps Lock Scroll Lock On Data is being read from or written to the hard drive Do not enter System Suspend mode or turn off the computer when this indicator light is on The number keys in the
53. is can damage the screen Use a soft dry cloth to wipe the LCD screen Q Clean the computer with a soft cloth lightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine 80 Troubleshooting This section describes how to solve common problems you may encounter when using your computer Many problems have simple solutions so try these suggestions before you call Sony Customer Support When you reconnect devices be sure to turn off the computer as described in Shutting Down Your Computer on page 15 Turning off the computer using other methods may result in data loss My computer does not start Check that the computer is plugged into a power source and that it is turned on Check that the power indicator on the front panel of the computer indicates that the power is on D Check that the battery is inserted properly and that it is charged L Make sure there is no diskette in the floppy disk drive Confirm that the AC adapter and all cables are connected firmly as described in Connecting Peripheral Devices on page 45 D If you plugged the computer into a power strip or UPS make sure the power strip or UPS is turned on and working D If you are using an external display check that it is plugged into a power source and turned on Check that the brightness control is adjusted correctly See the manual that came with
54. ite protect tab to protect valuable data from accidental erasure or overwriting Move the tab to the right or left to set or release write protection Write protect off Data can be saved on the Memory Stick media Write protect on Data can be read from but not saved on the Memory Stick media LOCK Back of Memory Stick media Using Memory Stick Media EI Formatting a Memory Stick Media Memory Stick media is formatted for immediate use when you purchase it If you need to reformat a Memory Stick media use the Memory Stick Formatter that is provided with the media Follow the procedures included here For more details about using Memory Stick Formatter refer to Formatter Help Reformatting erases all current data that is stored on a Memory Stick media Before you reformat confirm that the media does not contain files you want to keep Insert the Memory Stick media into the computer See Inserting a Memory Stick Media on page 28 for details on inserting Memory Stick media 2 Click the Start button point to Programs click Memory Stick Utility and then click Memory Stick Formatter 3 Click Start Formatter Memory Stick Formatter begins EJ VAIO Notebook User Guide i LINK Interface Your notebook comes equipped with an i LINK S400 i port The port is a digital interface IEEE 1394 for high speed communication By using your notebook a Sony Digital Handycam Camcorder or other compatib
55. kers built in 7 Start button 15 starting computer 14 startup problems 15 switching display 20 monitor 20 System Hibernation mode 20 44 System Idle mode 20 43 System Recovery CD s 88 System Suspend mode 20 44 T touchpad 7 21 troubleshooting 81 86 startup 15 81 turning on computer 14 TV interference iv TV interference 77 U unpacking the computer 2 USB connector 33 58 USB device 58 Using Batteries 78 Using the Jog Dial Control 40 V VAIO Action Setup 38 ventilation 76 video camera recorder 56 WwW Windows Explorer 18 Find window 18 Help 18 key 17 key combinations 18 Start button 15 taskbar 15 83 Windows 2000 ii 1
56. l Mode This is the normal state of your computer when it is in use The green power indicator light is on in this mode To save power you can turn off a specific device such as the LCD or the hard disk For details see Controlling Power Management in the online manual Customizing Your VAIO Notebook System Idle Mode This mode is convenient if you do not need to use your computer for a brief period The hard disk and video display enter a low power state and the CPU clock and processor stop The power indicator light is umber in this mode To activate System Idle mode Press Fn S You can also use the PowerPanel utility to enter System Idle mode To return to normal mode Press any key 44 VAIO Notebook User Guide System Suspend Mode The computer saves the current state of the system in RAM and switches off power to the CPU The tan power indicator light flashes in this mode To activate System Suspend mode Press Fn Esc You can also use the PowerPanel utility to enter System Suspend mode To return to normal mode Press any key System Hibernation Mode The state of the system is saved on the hard drive and power is turned off The power indicator light is off in this mode To activate System Hibernation mode Press Fn F12 You can also use the PowerPanel utility to enter System Hibernation mode To return to normal mode Turn on the computer by sliding the power switch forward The computer returns t
57. lat Position of your computer Place the computer directly in front of you as you work Keep your forearms horizontal with your wrists in a neutral comfortable position while using the keyboard touchpad or external mouse Let your upper arms hang naturally at your sides Take breaks during sessions with your computer Excessive use of the computer may strain muscles or tendons Q Furniture and posture Sit in a chair with good back support and armrests Adjust the level of the chair so your feet are flat on the floor A footrest may make you more comfortable Sit in a relaxed upright posture and avoid slouching forward or leaning far backward Viewing angle of the computer s display Use the display s tilting feature to find the best position You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position Adjust the brightness setting of the display also Ergonomic Considerations EI Q Lighting Choose a location where windows and lights do not create glare and reflection on the display Use indirect lighting to avoid bright spots on the display You can also purchase accessories for your display that help reduce glare Proper lighting adds to your comfort and work effectiveness Q Placement of an external display When using an external display set the display at a comfortable viewing distance Make sure the display screen is at eye level or slightly lower when you are sitting
58. le camera that supports the i LINK interface the DVgate software preinstalled on your computer and the i LINK interface you can easily create and edit your own home videos For more information on connecting an i LINK device see Connecting an i LINK device on page 56 Using a Floppy Disk Drive optional Ea Using a Floppy Disk Drive optional You can connect a floppy disk drive to the Y USB connector on your computer To Connect a Floppy Disk Drive You do not need to shut down the computer before connecting or disconnecting a floppy disk drive Plug the USB cable from a floppy disk drive into the Y USB connector on the computer The VAIO logo on the disk drive should be facing up ES ZAN ESASA SN RS AS SS SSRIS AA D25 SS ESS SOS S522 S Floppy disk drive optional To Insert a Diskette 1 Hold the diskette with the label side facing up 2 Gently push the diskette into the drive until it clicks into place Diskette 227 gt EI VAIO Notebook User Guide To Remove a Diskette Q When you finish using the diskette wait until the LED indicator turns off and then press the Eject button to remove the diskette Eject button LED indicator Removing a Floppy Disk Drive When the Computer is On 5 If your computer is turned off you do not have to follow these instructions 1 2 3 4 5 Double click in the task tray The Unplug or Eject Hardware d
59. lso the pulse mode Set the Dialing Mode for the Modem 1 Click the Start button point to Settings and then click Control Panel 2 Double click the Modem icon in the Control Panel The Modem Properties dialog box displays UI Click Dialing Properties The Dialing Properties dialog box displays 4 Select Tone or Pulse from Dialing Mode VAIO Notebook User Guide modular jack cover 77 LE J LL LL LLLI LLERA SET CSE DN CS 5 Click OK to close the Dialing Properties dialog box Open the 2 Modular jack cover Connect to the Telephone Line Connect the telephone cord to the line jack on the side of the computer until it clicks into place 222 ZF 77 S lt LI LIIT Z2 KEES SF SES ZS 7ZZZ LL rae gt Connecting the Internal Modem to the Telephone Line If your telephone has two modular jacks connect it as illustrated below Note When you complete the connections you must use your communication software to adjust the settings for your telephone fax and communication methods For details on adjusting settings refer to your communications software manual EJ VAIO Notebook User Guide Notes on the Telephone Line n The internal fax modem can be connected to the subscriber telephone line Do not connect it to the PBX Private Branch Exchange Connecting to the PBX may cause a failure or fire Some PBXs may use the same electric requirements as the subs
60. n danger d explosion La remplacer seulement par une batterie identique ou de type quivalent recommand par le fabricant vacuer les batteries us es selon les directives du fabricant The battery pack used in this device may present a fire or chemical burn hazard if mistreated Do not disassemble heat above 212 F 100 C or incinerate Dispose of used battery promptly Keep away from children La manutention incorrecte du module de batterie de cet appareil pr sente un risque d incendie ou de br lures chimiques Ne pas d monter incin rer ou exposer a une temp rature de plus de 100 C Evacuer promptement la batterie us e Garder hors de port e des enfants INDUSTRY CANADA NOTICE NOTICE The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document s The Department does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situatio
61. n to secure the battery on the computer 12 VAIO Notebook User Guide To Charge the Battery Pack 1 Connect the AC adapter to the computer 2 Insert the battery pack The computer automatically charges the battery the battery indicator light flashes in a double blink pattern as the battery charges When the battery is 85 full the battery indicator light turns off This process takes 2 hours if the system is off 5 5 hours if the system is on To charge the battery completely continue charging for an additional hour The battery indicator light on the front of the computer indicates the status of the battery pack Battery pack supplied Battery indicator Battery Indicator Light Status Meaning On The computer is using battery power Single blink The battery is running out of power Double blink The battery is charging Off The computer is using AC power Both the battery and power indicators blink when the battery is running out of power Keep the battery pack in the computer while it is directly connected to AC power The battery pack continues to charge while you are using the computer If your battery level falls to less than 10 you should either attach the AC adapter to recharge the battery or shut down your computer and insert a fully charged battery You can extend battery life by changing the power management modes in the PowerPanel utility See Using Power Saving Modes on page 43
62. nce to radio and television reception All cables used to connect peripherals must be shielded and grounded Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception FCC Part 68 This equipment complies with Part 68 of the FCC rules On the bottom of this equipment is a label that contains among other information the FCC Ringer Equivalence Number REN for this equipment If requested this information must be provided to the telephone company This modem uses the USOC RJ 11 telephone jack The REN is used to determine the quantity of devices which may be connected to the telephone line Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of the RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to the line as determined by the total RENs contact the telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required But if advance notice is not practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary
63. nd versatile recording medium has a data capacity exceeding that of a floppy disk The media is specially designed for exchanging and sharing digital data with compatible products Because it is removable the media can be used for external data storage Types of Memory Stick Media Two types of Memory Stick media are available The first type MagicGate amp hereafter referred as MG Memory Stick media is provided with copyright protection The second type simply referred to as Memory Stick lt media does not have the same copyright protection as MagicGate You can use both media with your notebook For music which requires copyright protection you can only use MG Memory Stick media with your notebook You can also use MagicGate compatible devices to record and playback music when they are connected to your computer You can store mixed data on the Memory Stick media For example you can copy an image on to MG Memory Stick media that already contains music What is MagicGate MagicGate is copyright protection that consists of authentication and encryption technology Authentication technology ensures that protected content is only transferred between compliant devices and media Protected content is recorded and transferred in an encrypted format to prevent unauthorized duplication or playback Ensure that the MG Memory Stick media has the MG mark FA Using Memory Stick Media 27 Handling and Storing Memory S
64. ns Repairs to certified equipment should be coordinated by a representative designated by the supplier Equipment malfunctions or any repairs or alterations made by the user to this equipment may give the telecommunications company cause to request that the user disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas CAUTION Users should not attempt to make such connections themselves but should contact the appropriate electrical inspection authority or electrician as appropriate NOTICE The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 The Ringer Equivalence Number for this equipment is 0 6 AVIS DE L INDUSTRIE CANADA AVIS L tiquette d Industrie Canada identifie le mat riel homologu Cette tiquette certifie que le mat riel est conforme aux normes de protection d exploitation et de s curit des r seaux de t l communications comme le prescrivent les documents
65. o its previous state 3 When returning from System Hibernation mode the system status stored on the hard disk is erased and the computer starts normally if you slide the power switch forward and hold for more than four seconds Time to return to normal mode System Idle requires less time than System Suspend and System Suspend requires less time than System Hibernation Power consumption System Idle uses more power than System Suspend and System Suspend uses more power than System Hibernation Connecting Peripheral Devices You can add functionality to your computer by connecting any of these peripherals Phone line page 46 Modem page 47 Local Area Network LAN page 51 CD CDRW DVD drive page 53 i LINK device page 56 Universal Serial Bus USB device page 58 Coo eC CE External display page 59 45 VAIO Notebook User Guide Connecting a Phone Line You need to connect a phone line to take advantage of online services the Internet and Sony Customer Support In order to register your notebook online register your software or use Sony Customer Support you must connect to a phone line Also you must register your computer to receive the extended warranty Open the phone line jack cover LEZ FE ZT ST Phone line jack cover 2 Plug one end of the phone cable optional into the jack on the inside of the phone line jack cover Make sure you insert the phone c
66. one lines 46 party phone lines 46 PBX 46 phone line 46 power source 10 Connecting the CD CDRW DVD Drive 53 connectors battery 8 DC In 8 10 USB 33 correction keys 16 17 Ctrl key 17 cursor movement keys 16 D DC In 8 10 digital video camera recorder 56 diskettes ejecting 34 handling 77 inserting into drive 33 troubleshooting 84 disposal of lithium ion battery vi drives 53 CD ROM 53 floppy disk 33 DV In Out 9 56 DVD 53 DVD media cleaning 78 handling 77 DV gate 32 91 E Eject button 34 ejecting diskettes 34 Energy Star ii ergonomic considerations 4 Escape key 16 external devices display 59 F faxes laws governing v floppy disk drive connecting 33 disconnecting 34 troubleshooting 84 Fn key 17 combination commands 20 function keys 17 G Getting Help 87 Guide Mode 40 H handling CD media 77 CD ROM discs 78 diskettes 77 DVD media 77 Handycam 32 hard drive indicator light 7 19 Hard Drive Partition 91 headphone connector 9 Help Getting 87 I i LINK 9 32 56 IEEE1394 9 56 Index 97 indicator lights 19 battery 7 12 19 Caps Lock 7 19 charge status 12 hard drive 7 19 Num Lock 7 19 power 7 Scroll Lock 7 19 input devices iv Insert key 16 17 inserting battery pack 11 diskettes into drive 33 installing hardware 45 peripherals 45 interference iv 77 internal speaker See speakers J Jog Dial 38 K keyboard 7 16 18 20 L Launcher Mode 39 LCD 75 lock lever 14 t
67. page 46 for details Check that the phone line is working You can check the line by plugging in an ordinary phone and listening for a dial tone Check that the phone number the program is dialing is correct Check that the software you are using is compatible with the notebook computer modem All preinstalled programs are compatible Call the software publisher or Sony Customer Support My modem connection is slow Your notebook comes with a 56K V 90 compatible modem Many factors influence modem connection speed including telephone line noise or compatibility with telephone equipment such as fax machines or other modems If you think your modem is not connecting properly to other PC based modems fax machines or your Internet Service Provider check the following Have your phone company check that your phone line is free from any line noise If your problem is fax related check that there are no problems with the fax machine you are calling and that it is compatible with fax modems Ifyou are having a problem connecting with your Internet Service Provider check that the ISP is not experiencing technical problems If you have a second phone line available try connecting the modem to that line 86 VAIO Notebook User Guide My mouse does not work If you have connected an external mouse to the mini USB connector it may cause some problems when you transfer high speed or high capacity data Use the US
68. rd messages memos or other recordings in analog by connecting a microphone or other audio equipment to the Microphone Line in connector of your notebook and then switching the connector functionality The Microphone Line in connector is for both MIC IN monaural and LINE IN stereo Switching the connector functionality To switch the Microphone Line in connector for use with a microphone or an audio device Double click on the task tray located in the lower right corner of the Desktop window The Volume Control window appears 2 From the Options menu click Properties The Properties window appears 3 Inthe Adjust Volume panel select Recording and then click OK The Recording Control window appears 4 Select either Microphone or Line Note When you are recording using a microphone select Microphone If you are recording using other audio equipment select Line Adjusting sound volume in the Recording Control window When Microphone or Line are not displayed in the Recording Control window from the Options menu click Properties click the item you want to display in Control and then click OK You can only adjust the recording volume in the Recording Control window in step 3 If you adjust the volume in step 1 the adjustment is only effective for playing sound It does not adjust the volume for recording sound 24 VAIO Notebook User Guide To increase the sound of the microphone 1 Double click
69. recorder may need to be connected differently Only Sony digital video cameras and connectors labeled DV In Out or i LINK are i LINK compatible See the manual that came with your digital video camera recorder for more information on installation and use The i LINK connector does not supply power to external devices If the external device requires power from the i LINK connector you cannot use the device with your computer The VAIO notebook supports transfer rates up to 400 Mbps however the actual transfer rate is the lowest transfer rate of the external device The i LINK features available may vary depending on the software applications you use See the documentation that came with your software for more information See page 42 for a list of i LINK cables compatible with your VAIO notebook EJ VAIO Notebook User Guide Connecting a Universal Serial Bus USB Device You can connect a USB device such as a USB mouse or printer to your computer You can use the optional Sony USB mouse PCGA UMS1 with this notebook Plug the USB mouse into the USB port You do not need to turn off your computer See the manual that came with your USB device for more information on installation and use To Connect a USB Device Use the Y symbol to locate the USB connector on the left side of the computer Plug the USB cable into this port SSS S2 SR SN FSS SSS S gt 3 SS SS USB mouse
70. rly connected See Connecting the CD CDRW DVD Drive optional on page 53 Q Clean the CD Q Check the speaker volume When I click an application icon a message appears such as You must insert the application CD into your CD ROM drive and the software does not start Q Some titles require specific files that are located on the application s CD Insert the disc and try starting the program again Make sure you place the disc in the tray with the label side facing up My floppy disk drive cannot write to a diskette The diskette is write protected Disable the write protect feature or use a diskette that is not write protected Q Check that the diskette is properly inserted into the floppy disk drive Troubleshooting 85 My speaker has no sound Q The built in speaker is turned off Press Fn F3 to turn on the speaker The speaker volume is turned to the minimum Press Fn F4 and then press or gt to increase the volume If your computer is powered by the battery check that the battery is connected properly and that it is charged Ifyou are using an application that has its own volume control check that the volume is turned up Check the volume controls in Windows Ifyou have connected a headphone or an audio cable to the Headphone connector disconnect the cable My modem does not work Q Check that the phone line is plugged into the line jack See Connecting a Phone Line on
71. roubleshooting 83 lever LCD 14 Liquid Crystal Display screen See LCD lithium ion battery disposal vi safety precautions vi loading battery pack 11 M MagicGate 26 maintenance 76 mega bass switch 20 memory adding 61 Memoty Stick card slot 8 Memoty Stick cards 26 86 microphone 7 microphone connector 9 modem laws governing v troubleshooting 85 moisture condensation 77 monitor switching among 20 mouse troubleshooting 86 mouse help 21 MovieShaker instructions 67 multiple phone lines 46 N navigation keys 16 Num Lock 7 indicator light 19 numeric keypad area 16 O operator keys 17 output devices iv P party phone lines 46 PBX 46 PC card inserting 35 release button 35 removing 36 slot 35 slot protector 35 troubleshooting 86 Type IT 35 98 VAIO Notebook User Guide phone connecting line 46 jack 46 laws governing v PictureGear 72 Power 7 power 19 indicator light 7 switch 14 power saving modes 43 System Hibernation 20 44 System Idle 20 43 System Suspend 20 44 power sources 10 connecting 10 precautions 76 Print Screen key 17 Printer 58 84 R radio interference iv 77 rechargeable battery pack 10 recharging battery pack 12 Recovery CDs 90 removing battery pack 13 diskettes 34 floppy disk drive 34 restoring data 90 S screen See LCD Scroll Lock 7 indicator light 19 selecting power source 10 Shift key 17 Shut Down Windows dialog box 15 Smart Connect 42 Smart Pad 22 spea
72. s you to see all the images stored in any directory on your computer Thumbnail views provide quick reminders of your pictures Brighten contrast enhance resize crop and color correct your pictures Create panoramic views animations screen savers wallpaper still pictures from MPEG and even html photo albums Managing Your Pictures Use the collection feature to manage your pictures Click the Folder tab and browse to locate your pictures NO Select the pictures you want to have in a collection 3 From Collection menu select Create New Collection 4 Enter a name for the collection and then click okay Creating a Photo Album Select the pictures you want to use to make an album From the Utilities menu select Album Maker 1 2 3 Choose the type of Album you want and click Okay 4 Now add more pictures frames text and effects 5 When you are finished select Create Album in File menu or click the Create Album icon on the toolbar ex Designate the folder you where want to save the Album Enter the Target Album name select Thumbnails and click Okay The new album can be viewed using most internet browsers PictureGear 73 Using Panorama Maker Panorama Maker stitches a group of still images into a 360 degree panoramic picture The source images should be the same size and overlap 20 How to stitch a panoramic picture 1 Gather the source images into the same folder or collection 2 Select t
73. se it to wipe the surface of the disc from the center out Wipe off any remaining moisture with a dry soft cloth Using Batteries Q Never leave the battery pack in temperatures above 140 F 60 C such as under direct sunlight or in a car parked in the sun Battery life is shorter in a cold environment This is due to decreased battery efficiency at low temperatures Charge the batteries at temperatures between 50 F and 80 F 10 C to 30 C Lower temperatures require a longer charging time While the battery is in use or being discharged the battery pack heats up This is normal and is not cause for concern Keep the battery pack away from all sources of heat Q Keep the battery pack dry Do not open or try to disassemble the battery pack Do not expose the battery pack to any mechanical shock Ifyou are not using the computer for an extended period of time remove the battery pack from the computer to prevent damage to the battery If after fully charging the battery pack the battery power is still low the battery pack may be reaching the end of its life and should be replaced Q You do not need to discharge the battery before recharging If you have not used the battery pack for a considerable amount of time recharge the battery Notes on Use 79 Cleaning Your Notebook Make sure to disconnect the AC adapter before cleaning the computer Avoid rubbing the LCD screen as th
74. six screws at the locations shown below Removing a Memory Module 1 Turn off the computer and all peripheral devices Disconnect the power cord and all cables from the computer and then remove the battery 2 Perform Steps 2 and 3 for Installing a Memory Module The computer interior becomes extremely hot during operation Wait about one hour for the computer to cool down before you remove the screws 3 Remove the memory module Before you handle the memory module touch a metal part of the computer to discharge any static electricity accumulated on your body Carefully press down on the release tabs on either end of the memory module at the same time Pull out the memory module in the direction of the arrow Perform Steps 6 and 7 for Installing a Memory Module 66 VAIO Notebook User Guide Confirming Added Memory Capacity 1 Turn on the computer Click the Start button point to VAIO and then click Sony Notebook Setup Click the About This Computer tab Check the System Memory displayed in the left panel to confirm that the correct memory amount is displayed If the memory amount on the display is not correct shut down the system turn off the computer and repeat the installation procedures Sony Notebook Setup About Your Software MovieShaker This application can be used to create fun and innovative movies without any knowledge of film editing In a few simple steps motion pic
75. t regulations 2 VAIO Notebook User Guide Unpacking Your Notebook Remove the following hardware items from the box Main unit Rechargeable battery pack a AC adapter Power cord Manuals The VAIO Notebook User Guide this manual contains information on how to get the most from your computer find help and solve common problems It also includes product specifications Sony Read Me First contains Troubleshooting and Errors the most up to date information on using your computer and software support information The Microsoft Windows 2000 Professional Getting Started Manual explains how to use the basic features of the Windows operating system Unpacking Your Notebook EJ Software CDs Microsoft Word 2000 Recovery CDs System Recovery CD s Application Recovery CD s To use these recovery CDs you need to purchase either the PCG CD51 CD ROM drive the PCGA CDRW51 CD RW drive or the PCGA DVD51 DVD drive Other Q Setting up your VAIO Notebook poster Q Packet containing special product offers VAIO Notebook User Guide Ergonomic Considerations You will be using your notebook computer as a portable device in a variety of environments Whenever possible you should attempt to apply the following ergonomic considerations to both stationary and portable environments Computer positioned directly in front of you Arms at desk level Wrists relaxed and f
76. t mouill moins que la prise soit con ue cet effet LJ Ne jamais toucher un fil t l phonique d couvert ou un terminal moins que la ligne t l phonique n ait t d branch de l interface r seau Soyez tr s prudent lorsque vous installez ou modifiez les lignes t l phoniques vitez d utiliser le modem durant un orage lectrique N utilisez pas le modem ni le t l phone pour pr venir d une fuite de gas si vous tes pr s de la fuite L appareil doit tre le plus pr s possible d une prise murale pour en faciliter l acc s Li LI L L Regulatory Information If you have any questions about this product you can reach the Sony Customer Information Service Center at 1 888 4SONYPC or write to the Sony Customer Information Service Center at 12451 Gateway Blvd Ft Meyers FL 33913 or find Sony Customer Service on the Web at http www sony com pcsupport The number below is for FCC related matters only Declaration of Conformity Trade Name SONY Model No PCG 3102 PCG 3112 Responsible Party Sony Electronics Inc Address 1 Sony Drive Park Ridge NJ 07656 Telephone 201 930 6972 This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation
77. t to the network contact your network administrator Using Ethernet to Connect to a Network You can exchange data with other devices on a network by connecting your notebook to the location s Local Area Network LAN To connect the notebook to a network you need a network PC card For more information on using PC cards see Using PC Cards on page 35 of the User Guide Consult the network administrator to find out about the accessory settings required to access the network EJ VAIO Notebook User Guide Setting Up Your Ethernet Connection To connect to the network Right click My Network Places and select Properties 2 Click Advanced and select Network Identification to set the computer name domain workgroup and DNS suffix You can also use the Network Identification Wizard To set the connections bindings and provider order 1 Right click My Network Places and select Properties 2 Click Advanced and select Advanced Settings This will give you access to Adapters and Protocol Bindings and Provider Order Connecting the CD CDRW DVD Drive optional E Connecting the CDICDRWIDVD Drive optional You can use the optional PCGA CD51 CD ROM drive the PCGA CDRW51 CD RW drive or PCGA DVD51 DVD drive with your notebook If you use either optional drive when your computer is running on battery power the battery life will be shorter The drive draws power from the computer through a PC card Procedures for connectin
78. th supplied adapter Rechargeable battery AC adapter and power cord VGA adapter 60 watts maximum 16V DC AC100 240V The notebook supports 50 60hz and 100 240V AC Energy Star Compliant Advanced Configuration and Power Interface ACPI Lithium ion 10 2 w x 0 9 h x 8 2 d 259mm x 23 7mm x 209mm 2 98 lbs 1 35 kg 40 F to 95 F 5 C to 35 C Specifications 93 Model PCG SR5K PCG SR7K Operating Humidity 20 to 80 not condensed provided that humidity is less than 65 at 95 F 35 C hygrometer reading of less than 84 F 29 C Storage Temperature 4 F to 140 F 20 C to 60 C temperature gradient less than 18 F 10 C hour Storage Humidity 10 to 90 not condensed provided that humidity is less than 20 at 140 F 60 C hygrometer reading of less than 95 F 35 C MHz denotes microprocessor internal clock speed other factors may affect application performance t The processor may be reduced to a lower operating speed when operating on battery power GB means one billion bytes when referring to hard drive capacity Accessible capacity may vary Your system may contain additional memory installed at the time of purchase tt The PCG SR5K includes 64 MB memory The PCG SR7K includes 128 MB memory Maximum speed for faxing is 14 4 kbps Your modem is capable of downloading at 56 kpbs using 56K V 90 Your online service or Internet Service Provider may
79. tick Media Follow these guidelines when handling and storing Memory Stick media Do not touch the contacts on a Memory Stick media with your fingers or any metal object Use only the labels provided with a Memory Stick media Do not attach other labels to it Q Handle the media carefully Avoid dropping bending or subjecting it to shock or vibration Do not attempt to disassemble the Memory Stick media Do not allow the media to get wet Avoid using or storing the Memory Stick media in any of the following Locations subject to high temperatures or direct sunlight i e the interior of a vehicle parked in bright sunlight Locations exposed to high humidity or corrosive substances Locations that are subject to static electricity or electrical noise generated by large appliances or office equipment When transporting or storing a Memory Stick media always use its storage case Always backup important data that is stored on a Memory Stick media Do not remove the media when the indicator light is on Q Only MG Memory Stick media can be used with copyright protected data like music 28 VAIO Notebook User Guide Inserting a Memory Stick Media Insert the Memory Stick media into the media slot on the left side of the computer until it clicks into place Memory Stick Hold the Memory Stick media with the arrow pointing in toward the slot To avoid damaging the computer or th
80. tore without Format option you may need to reinstall applications that were not included with the computer when you purchased it If you have any questions on using the System Recovery CD contact Sony Customer Support Using the System and Application Recovery CDs EJ To use the System Recovery CD s The optional PCGA CD51 CD ROM drive the PCGA CDRW51 or the PCGA DVD51 drive must be connected to the computer to use the System Recovery CD You need to complete the Windows registration process when you use the System Recovery CD Make sure you have the product ID number located on the cover of your Microsoft Windows Getting Started manual You will need this number to complete the recovery process Insert the Sony System Recovery CD in the CD ROM drive 2 Shut down your computer as described in Shutting Down Your Computer on page 15 3 Wait four seconds and turn on your computer Click OK to signify you have read and accept the Microsoft End User License Agreement 5 When the System Recovery menu appears follow the on screen instructions to complete the recovery process Your system may include one or two System Recovery CDs If you have two System Recovery CDs insert the first CD to run the System Recovery program You are prompted to insert the second CD once the information from the first CD has been installed The recovery process takes 30 to 60 minutes to complete After recovering your system using the SRCD
81. tures can be combined with special effects still images pictures and music files and then saved in a format most computers can play For PCG SR5K models you must set the screen resolution to 1024x768 Your default screen resolution of 800x600 is not supported by MovieShaker To set the resolution of your monitor from the Start menu select Settings Control Panel and then click Display Select the Settings tab and adjust the Screen area slider bar to 1024x768 Adjusting your settings is not necessary for external monitor connections that are 1024x768 When you are finished using MovieShaker reset the resolution to its original setting of 800x600 Main Window Working Panel Editing trays Clip tra RU Help Importing Images and Sound Clips 1 Click E Import 2 Find the file you want to add 3 Select the file 67 68 VAIO Notebook User Guide 4 Click Open The file is added to the Clip tray About Your Software 69 Create a Movie using Shaker After adding clip s to the Clip tray you can create a short movie using the Shaker feature Shaker randomly select clips from the Clip tray to create a 30 second scene 1 Click the Shake tab 2 Select a mood by clicking a face in the Shaker tray 3 Click Shake A thirty second scene is automatically generated and saved to the Product tray 4 To preview switch the Work Panel to Product tray mode and press play Scenes created with Shaker begin with
82. ver LCD lock lever 2 Slide the power switch to the right until the green power indicator light turns on Power indicator Power switch jij gt If you hold the power switch in the On position for more than four seconds the computer turns off 3 If necessary adjust the brightness controls for the LCD display To decrease the brightness press Fn F5 and then the down or left arrow key To increase the brightness press Fn F5 and then the up or right arrow key Shutting Down Your Computer 15 Shutting Down Your Computer To avoid potential loss of data follow these steps to shut down your computer 1 Click the Start button on the Windows taskbar 2 Click Shut Down at the bottom of the Start menu to display the Shut Down Windows dialog box 3 Select Shut down Click OK amp Respond to any prompts warning you to save documents 5 Wait for your computer to turn off automatically The power indicator turns off Turn off any peripherals connected to your computer 5 If you are unable to shut down your computer using the steps described above press the Ctrl Alt Delete keys at the same time to restart the computer If you are unable to restart the computer in this way you can slide the power switch forward and hold for four seconds This operation may result in data loss During a period of inactivity you can conserve battery life by using System Suspend mode See Controlling Po
83. wer Management in the online manual Customizing Your Notebook To access the online documents click the Start button point to Help Center and click VAIO User Manuals 16 VAIO Notebook User Guide Using the Keyboard Your keyboard is very similar to a typewriter s but the keyboard has additional keys that perform specific computer related tasks Escape Key Function keys Print Screen key Correction keys Backspace key Break Fn key K L sirke am F pima zaa BIDI r Ctrl key j Fn key Alt key Numeric keypad area Navigation keys Windows key Applications key Key Description Numeric keypad Contains the keys found on a typical calculator area Use the numeric keypad area to type numbers or to perform mathematical calculations such as addition and subtraction Note that you must press the Num Lock key to activate the numeric keypad When you do so the Num Lock light will be on Navigation keys Several keys are devoted to moving the cursor on the screen the four arrow keys which also function as the Home End Page Up and Page Down keys Correction keys The Insert Back Space and Delete keys enable you to make corrections in your documents Function keys The 12 function keys along the top of the keyboard are used to perform designated tasks For example in many applications F1 is the Help key The task associated with each function key may vary from one application

Vantage 2K UG.book - Manuals, Specs & Warranty

Contents

Download Pdf Manuals

Related Search

Related Contents

Vantage 2K UG.book - Manuals, Specs &amp; Warranty

Contents

Download Pdf Manuals

Related Search

Related Contents

Vantage 2K UG.book - Manuals, Specs & Warranty