NanoPC User`s Manual
Contents
1. ror Foxconn Bios Setup Utility to switch Date elements Access Level Model Name TXE Version System Date lt weekday gt lt month gt lt date gt lt year gt format Day weekday from Sun to Sat this message is automatically displayed by BIOS Read Only Month month from 1 to 12 Date date from 1 to 31 Year year set up by users Use ENTER TAB or SHIFT TAB to select a field Use or to input the value gt System Time This item allows you to configure the desired time Use ENTER TAB or SHIFT TAB to select a field Use or to input the value The three fields of the setting are hour minute second respectively gt Access Level It displays your current access level If you enter system with a user password it will display User If no password is set or you enter system with administrator password this item will display Administrator F center OH Foxconn Bios Setup Utility fu Ger Super BIOS Protection Settings gt Super BIOS Protect To protect the system BIOS there is a BIOS write protection mechanism provided to prevent BIOS FLASH tool being improperly used to update BIOS or the vicious virus such as rewriting BIOS setup gt Smart BIOS Fox Intelligent Stepping CPU Configuration Press Enter to go to relative submenu Smart BIOS Smart Boot Menu2. User s Manuali esunsu 77 ES css ee Trademark All trademarks are the property of their respective owners Version User s Manual V1 1 for NanoPC Symbol description Note Refers to important information that can help you to use NanoPC better and tells you how to avoid problems Caution Indicating a potential risk of hardware damage or physical injury may exist WEEE The use of this symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed informa tion about recycling of this product please contact your local city office your house hold waste disposal service or the shop where you purchased this product All rights reserved All trade names are registered trademarks of respective manufacturers listed images are for reference only please refer to the physical product for specific features Safety Notice N 49 Before using this product please read the below safety notice carefully this will help to extend the product s lifecycle and work normally Please use hee power eee that comes with the Medus bed wrong power adapter may damage your device m Make sure all the peripherals
3. 2 About amp Help This page shows some information about Fox WINFLASH FOXCONN WINFLASH Version 1 0 0 0 PackageVersion 10 1 4 Home Page http www foxconnchannel com ContactUs Technical Support Team Website Copyright C 2011 by FoxconnTechnology Group Al Rights Reserved R ee ES i ee Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or
4. You can select the EIST Processor Power Management PPM through this item Enhanced Intel SpeedStep technology EIST allows the system to dynamically 9 adjust processor voltage and core frequency which can result decreased average power consumption and decreased average heat production There are some system requirements must be met including CPU chipset motherboard BIOS and operation system Please refer to Intel Website for more information CPU Report This item is used to enable or disable CPU C3 ACPI C2 report to OS CPU C6 report This item is used to enable or disable CPU C6 ACPI C3 report to OS Package C State limit It is used to select the C State mode Advanced OX OIO Foxconn Bios Setup Utility LE 7 Trusted Computing Settings gt Trusted Computing North Bridge TXE Subsystem Onboard Device Configuration SATA Configuration Super IO Configuration Network Stack Configuration Press Enter to go to its submenu Realtek PCle GBE Family Controller Press Enter to go to get driver information and configure Realtek ethernet controller patameter m Trusted Computing OX OIO Foxconn Bios Setup Utility Se Configuration Current Status Information NO Security Device Found Device TCG proto col and INTA interfaj will not be availa Security Device Support This item is used to enable or disable BIOS support for security d
5. are properly connected before using NanoPC This product should only be used in an environment with ambient temperatures 1 40 shut down the computer before installing or uninstalling the peripheral which does not support hot plug m Disconnect all peripherals befor m Please do not disassemble th by the original manuf m Risk of explosion if battery batteries according to the instructions m By ees NN pu mairie uae e rit meae cma re mea Package Contents Power Adapter Easy Guide USB Flash Disk d Opening Tool Screws Magnet Rubber Foot xe Na Mini PCle Half Card Support Mini COM to COM cable Optional Screws cover LLL LLL See eT TABLE OF CONTENTS Introduction 1 ron Side 2 1 2 Back Side View 1 3 DDR3 DDR3L jumper Placement and connecting 2 1 Placement oHNano PO e 8 Seat Base 8 the desk Installing to Display 2 2 Gonnectioniof NanopG 2222 10 Connect display Connect USB devices Connect network cable Connect POW ET Connect Point Of Sales BIOS Setup Enter BIOS Sevag femp 15 F center Smart BIOS ANN NN SSS S Boxalmtelligemtes tapping errs 2
6. system BIOS You can click Backup BIOS and key in a file name then click Save to finish the backup operation The extension of this backup file is ROM for AMI BIOS Make sure you can remember the file name together with the directory which it is stored prevented that you may need them to recover your BIOS later m Date modified Perflogs 2009 7 14 11 20 21 Program Files 2009 1 14 15 46 J Program Files 86 2012 1 7 12 25 V Users 2012 1 7 11 59 J Windows 2012 1 7 12 24 F Fie name Save astype ROM ROM Cancel 1 3 Local Update Update BIOS Key in a BIOS name Click to Save This page helps you to update your BIOS from a local file After click Update BIOS An alert message will be displayed to ensure if you really want to continue click Yes to confirm A setup wizard will guide you to load a local BIOS file to finish the operation You must remember from which directory to load your new BIOS file with an extension of for AMI BIOS before the setup wizard starts UTILITY n i Updating cause some problems eg the computer restarting may be failed which are not guaranteed by Foxconn s product warranty Are you sure to continue
7. 0 CPU Configuration Advanced Trusted Computing NA S Subsystem Onboard Device Configuration SATA Configuration SupeniO Gonfigurationg Security Save amp Exit Install OS 4 1 Install Windows 8 1 Windows 8 Windows 7 64 bit 39 4 2 InstalliDriverS 43 Utility EOXWINEEBASLIE 45 1 EocallUpdater tere 45 az About8ikelip m 47 ra S NR INTRODUCTION ea AUD E i 1 1 Front Side View INTRODUCTION E ee a INTRODUCTION 1 o Power button with Power indicator LED Press to turn your NanoPC on or off the LED can indicate your system states 2 c Suspend Button Enter suspend mode in operating system Clear CMOS Press Suspend Button 10s in S5 3 556930 USB 3 0 port This USB port supports the USB 3 0 2 0 1 0 specification Use this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc 4 Msome Multi Function card reader This memory card reader supports MS MS Pro SD SDHC SDXC MMC memory cards used in devices like digital cameras mobile phones Media players and so on 5 p Microphone Connects to a microphone or playback devi
8. Chipset Driver to install it first After that you can click One Click Setup and then choose the items you want to install or you can click on each individual driver to install it manually When you install the driver of Windows 7 64bit OS you need to install it manually under the path Driver V Intel TXEpatch 4 After installing all the drivers you need to restart your NanoPC then you can start using it SEEN UTILIT Fox WINFLASH Fox WINFLASH is a useful utility to backup and update your system BIOS Supporting Operating Systems m Windows 8 1 m Windows 8 m Windows 7 64bit Please set the BIOS setting BIOS Write Protect or Super BIOS Protect to Disabled when running this application 1 Local Update 1 1 Local Update BIOS Information This page lets you know your system BIOS information Minimum Exit tt FOXCONN WINFLASH Focal Unde Current 805 formation BIOS Info kums Toolbar _ Backup Bos 2 Update BOS Bos verson About amp Help Show current BIOS information Note BIOS Size 32Mb 32M bit 4M Byte BIOS Size 16Mb 16M bit 2 Byte Please refer to the physical motherboard for details UTI 8 zivs sis 1 2 Local Update Backup BIOS This page can back up your
9. Power is 1 5V 1 35V 2 3 1 1 5V 2 PLACEMENT AND CONNECTING ea AANA El 2 1 Placement of NanoPC In Seat Base 1 Place your NanoPC into the groove of the Seat Base On the desk 1 Fit your NanoPC with Magnet Rubber Foot and put it on the tabletop directly m amp Eg HILL LLL LL LL P LL LLL 2 PLACEMENT AND CONNECTING Installing to Display This is the best space saving way 1 Use four screws to fasten the Vesa Mount onto the display back To fasten the VESA mount your display must comply with VESA75 or VESA100 stan 4 dard The two groups of holes on your display have different space between and they help you easily fasten the bracket onto your display ATIS SEES PLACEMENT AND CONNECTING AQAA B 2 2 Connection of NanoPC Connect display Connect a display or TV that has HDMI port or VGA port to your NanoPC a EE 5 7 PLACEMENT AND CONNECTING Connect USB devices Connect USB devices to the USB ports for example mouse keyboard devices ES eee S S E o eple Connect network cable Connect one end of a network cable to the RJ 45 LAN port and the other end to a hub or switc
10. SSSSNS Which type of installation do you want Upgrade running We Custam tacvanced install a new copy of Windows This option does not your files settings and programs The option to make changes to Jewhen you Start yout computer using the installation king up your files before you process Help me decide 8 The setup will display the hard disk partitions 20GB in this example of your system If there were other systems such as Linux installed previously you need select them and click Drive options advanced to delete them When all partitions are clean setup will display the biggest size of your hard drive Where do you want to install Windows Ea Dto Unallocated Space kosee loose Load rives i INSTALL os E ss ps 008 9 In the hard disk size screen you can click the new button to create partitions as you need In this example we are creating a 70GB partition to install Windows Make your modifications and click Apply Where do you want to install Windows Name FreeSpace Ty Dick Unalocated Space 50268 600GB Refresh 6 Load Driver To ensure that all Windows features work co
11. Smart Power LED Enabled Foxconn Bios Setup Utility Smart Power LED Settings select Screen ti Cligk Select Item Entep Dbl Click Select Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Right Click Exit Smart Power LED is a feature built on your motherboard to indicate different states during Power On Self Test POST The LED is located at the front panel and it displays POST state by different long short blinking intervals You can always leave this state enabled Normal No Memory No Display Post Error Message Always On Continue blinking On 1sec Off 1sec Continue blinking On 2sec Off 2sec Quick blinking twice 1 3sec On 1 3sec Off one long On 1sec continuously Always On Reboot amp Memory OK Reboot amp Display OK Enter Setup or Skip gt Smart Boot Menu When PC starts it will ask you to press Del key to enter setup or press F7 key to enter smart boot menu If Disabled is selected then pressing F7 has no function This also prevents user without password trying to get into your computer through smart boot menu Fox Intelligent Stepping OH 074 Foxconn Bios Setup Utility Enable Disabled Spread Spectrum gt Spread Spectrum If you enabled this function it can significantly reduce the EMI Electromagnetic Interference generated by the system so to comply with FCC regulation But if overclocki
12. ces with optical connectors 3 5mm jack 6 Headphone Connects to a headphone INTRODUCTION a AAA E ls 1 2 Back Side View INTRODUCTION S lt 1 COM COM port Use this port for devices such as Point Of Sales Connect Point Of Sales that uses Mini COM to COM cable to this port 2 20 USB 2 0 This USB port supports the USB 2 0 1 0 specification Use this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc 3 VGA VGA Port Connect VGA compatible displays such as a monitor or projector 4 High Definition Multimedia Interface port supports Full HD display devices Connect monitor or TV that uses HDMI connector to this port 5 Kensington lock Attach a Kensington security system or a compatible security lock to secure your NanoPC in place 6 zu RJ 45 LAN port Supports 10 100 1000Mb s Ethernet network Connect network cable to access Internet V 52 Line out Connects to powered analog speakers or recording devices with optical connectors 3 5mm jack 8 DCIN Power input port Connect power cord that come with your product INTRODUCTION AAA H B 1 3 DDR3 DDR3L jumper Set the jumper to pins 1 2 it set to DDR3L the DDR3L Power is 1 35V Set the jumper to pins 2 3 it set to DDR3 the DDR3
13. d or mouse set to enabled Enabled This option will enable the legacy USB support Disabled This option will keep USB devices available only for EFI applications USB3 0 Support This item is used to enable or disable USB3 0 XHCI Controller Support Azalia HD Audio controller This item is used to enable or disable the Azalia HD Audio Controller SATA Configuration OH OIO Foxconn Bios Setup Utility SATA Configuration Enabled Disabled Se rial ATA gt Onboard SATA Controller This item is used to enable or disable the onboard SATA controller Onboard SATA Mode This item is used to set the operating mode of your SATA ports Native IDE This configures the SATA ports to support native IDE mode AHCI The Advanced Host Controller Interface AHCI specification describes the register level interface for a Host Controller for Serial ATA The specification includes a description of the hardware software interface between system software and the host controller hardware AHCI provides more advanced features including SATA features but some SATA drives may not support AHCI unless they are labeled with AHCI support in its specification If your motherboard supporting AHCI and you have a SATA device which also supports AHCI then you can select IDE option to have fair performance only PATA SATA level or you can select AHCI to get its best performance gt Serial ATA Controller This item is used to enable or disable th
14. e Serial ATA Port 1 Super Configuration fOr bios Foxconn Bios Setup Utility E Super 10 Configuration Set Parameters of Serial Port 1 COMA I Super 10 Chip Serial Port 1 Configuration gt Serial Port This item is used to enable or disable the serial port COM Device Settings This item shows the resource assigned to the serial port Change Settings This item is used to select an optimal settings for Super device Network Stack Configuration OIO Foxconn Bios Setup Utility Bar Bars Enable Disables UEFI network stack gt Network stack This item is used to enable disable UEFI network stack The UEFI Unified Extensible Firmware Interface Network Stack implements the TCP IP network interfaces such as SNP MNP ARP IP UDP DHCP MTFTP and TCP Boot bios Foxconn Bios Setup Utility Select the keyboard NumLock state Hard Disk CD DVD UEFI USB Hard Disk UEFI USB CD DVD UEFI USB Key UEFI USB Floppy UEFI Network gt Bootup Numlock State This item defines if the keyboard Num Lock key is active when your system is started The available settings are On default and Off Quiet Boot This item is used to enable disable the quiet boot Disabled Displays the normal POST messages Enabled Displays OEM customer logo instead of POST messages Fast Boot This item is used to enable or disable boot with initialization
15. elect this option and press Enter a message will be displayed in the screen Select Yes to save your changes and reset computer select No or lt 5 gt to return to the main menu Discard Changes and Reset If you select this option and press Enter a message will be displayed in the screen Select Yes to exit setup utility and reset computer without saving your modifications select No or lt 5 gt to return to the main menu gt Restore Defaults Optimal defaults are the best settings of this motherboard Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values Select this option and press Enter it will pop out a dialogue box to let you load the defaults Select Yes and then press Enter to load the defaults Select No and press lt Enter gt it will not load BIOS SETUP E E S SE By this default BIOS have set the optimal performance parameters of system to improve the performances of system components But if the optimal performance parameters to be set cannot be supported by your hardware devices for example too many expansion cards were installed the system might fail to work Boot Override BIOS auto detect the presence of connected devices select the device you want to boot from and press Enter then the system will directly boot from the selected devices Select Yes to discard your modificat
16. evice O S will not show Security Device TCG EFI protocol and INTA interface will not be available North Bridge OH bios Foxconn Bios Setup Utility North Bridge Configuration Select DVMT 5 0 Pre Allocated Fixed Memory Information Graphics Memory size Total Memory 048 MB P by the Internal Memory Slot Graphics Devices Enabled 641 256MB gt Total Memory This item displays the current using memory information Memory Slot 0 These items display the memory size installed on each slot DVMT Pre Allocated This item is used to select DVMT 5 0 Pre Allocated Fixed Graphics Memory size used by the Internal Graphics Devices DVMT Total Gfx Memory This item is used to select DVMT 5 0 Total Graphic memory size used by internal graphics device Subsystem Intel Subsystem Configuration TXE Version TXE Version It displays the current TXE version Foxconn Bios Setup Utility 01 00 02 1060 eme Onboard Device Configuration Foxconn Bios Setup Utility Enabled Disabled board LAN Control Onboard LAN Controller This item is used to enable or disable the onboard LAN controller gt Onboard USB Controller This item is used to enable or disable the onboard USB controller gt Legacy USB Support This item is used to enable the support for USB devices on legacy OS If you have a USB keyboar
17. h ES eee S S PLACEMENT AND CONNECTING ea AANA B Connect power cord Connect the power adapter to the power input port of the NanoPC and then press the power button to start it a amas 5 een S S Es 3 gt The power adapter is dissipating heat during normal use please do not cover it and lt keep it away from your body to prevent injury from heat exposure ll PLACEMENT AND CONNECTING Connect Point Of Sales Connect one end of cable to the COM port and the other end to a Point Of Sales A ee S S B Y BIOS SETUP m BIOS SETUP Enter BIOS Setup The BIOS is the communication bridge between hardware and software correctly setting up the BIOS pa rameters is critical to maintain optimal system performance Power on the computer when the message Press lt Del gt to enter setup Press lt F7 gt to enter boot menu appears at the bottom of the screen you can press lt Del gt key to enter Setup A We do not suggest that you change the default values in the BIOS Setup and we shall not be responsible for damage which resulted from the change you made Use the arrow right left keys to select a specific function and go to the submenu Each function is ex plained below Main It displa
18. ions select No or lt 5 gt to return to the menu Reset System with ME disabled Mode Press Enter to go to its submenu INSTALL OS E 2 R03 What kinds of hardware and software you need here 1 Windows 8 1 Windows 8 Windows 7 64 bit Install USB Disk or USB DVD ROM drive and ndows 8 1 Windows 8 Windows 7 64 bit Install CD Other purchase 2 NanoPC USB Flash Disk In this package 4 1 Install Windows 8 1 Windows 8 Windows 7 64 bit 1 Connect the Windows 8 1 Windows 8 Windows 7 64 bit Install USB Disk or USB DVD ROM drive to one USB port of NanoPC 2 Press power on button to turn on your computer 3 Putthe Windows 8 1 Windows 8 Windows 7 64 bit Install CD into the USB DVD ROM drive if you use the USB DVD ROM drive 4 Computer will choose the boot device by BIOS default and start loading the files for installing the OS Please press Del key to enter BIOS Setup if you want to change the first boot device for installing the OS 5 When the installation windows popup set the related items and click Next to continue then click Install now button to start the setup 6 When the license terms appear choose accept and click Next to continue 7 It will then ask you to select the installation type Click Custom advanced to install a new copy of Windows INSTALL OS SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
19. more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the equipment RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna s used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter End users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance re ss S Warning statement for Europe Also put in the manual which directive to fulfil and also which countries to sell the product Example of a text to tell which directive has been fulfilled Hereby Foxconn declares that this nT iBT Series is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC
20. ng is activated you had better disable it CPU Configuration 8 CPU Configuration CPU Brand Name Intel R Celeron R CPU J190 L1 Data Cache Foxconn Bios Setup Utility XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS Windows 11 Code Cache Energy Efficient gt Intel XD Bit This item is used to enable disable the Execute Disable Bit feature Intel s Execute Disable Bit functionality can help prevent certain classes of malicious buffer overflow attacks when combined with a supporting operating system gt Limit CPUID Maximum This item is used to enable or disable CPUID maximum value limit configuration Set Limit CPUID Maximum to 3 Should be Disabled for WinXP gt Intel Virtualization Technology Appears only when CPU supports Virtualization i e Intel amp Vanderpool Technology allows a platform to run multiple operating systems and applications in independent partitions or containers One physical compute system can function as multiple virtual systems Vanderpool Technology can help improve future virtualization solutions This item will be displayed only when the CPU is supporting this feature and the setting is used to enable disable it BIOS SETUP ies Power Technology This item is used to enable or disable the power management features Default value is Energy Ef ficient EIST
21. of a minimal set of devices required to launch active boot option This is no effect for BBS boot options FIXED BOOT ORDER Priorities These items are used to set the system boot order Hard Disk Drive BBS Priorities CD DVD ROM Drive 5 Priorities USB Floppy Drive BBS Priorities USB CD DVD ROM Drive BBS Priorities USB Hard Disk Drive BBS Priorities USB KEY Drive BBS Priorities NETWORK Device BBS Priorities UEFI Boot Drive BBS Priorities This items appear only when the devices are available Use this items to specify the boot device priority sequence of the detected devices CSM parameters Foxconn Bios Setup Utility car Compatibility Support Module Configuration Enable Disable CSM Support CSM Support This item is used to enable or disable CSM Support OR Foxconn Bios Setup Utility Resume By USB Device s E Resume By USB Device s This item is used to enable or disable the USB device s to generate a wake up Resume By Onboard LAN This item is used to enable or disable the onboard LAN to generate a wake up Resume By RTC This item is used to enable or disable RTC alarm event to generate a wake up RTC is system real time clock RTC Alarm Date Days When Resume by RTC is enabled select a specific date to generate a wake up RTC Alarm Time HH MM SS When Resume by RTC is enabled select a specific time to generate a wake up Energy u
22. rrectly Windows might create additional partitions for system files So you will see a 100MB partition reserved by system after you create a partition Select the 20GB partition and click Next to continue Where do you wantto install Windows Name T Dek PoriioniSystem Reserved ug 0580 Pariton2 Unallseated Space dy Refresh Di 8 Leod Driver Ey ea 10 The setup program will then start to install Windows 8 1 Windows 8 Windows 7 64 bit on your hard disk During the installation your computer will restart several times Installing Windows That s ll the information we need right now Your computer will restart several times during inetallatien Mf Cosa Windowsties INSTALL OS E ESSI G 11 When the installation is complete setup will prepare your computer for it s first use You can then follow the steps to select system settings create an account set a password etc until the whole process is completed 4 2 Install Drivers 1 When the Windows 8 1 Windows 8 Windows 7 64 bit is completely installed you have to install the necessary drivers before using the NanoPC Connect the NanoPC USB Flash Disk to your system 2 Waiting for a few seconds the main menu will be displayed on the screen 717717 3 Use these options to install all the drivers for your system You must click Intel
23. sing product This item is used to configure the DeepSx Mode configuration gt Restore AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss Health e Foxconn Bios Setup Utility ES iem Orm lt gt CPU Temperature CPU Shutdowm CPU Fan Speed Temperature 3 3V 5V SYS CPU VCore VDDR 4 Enabled Enabled CPU Shutdown Temperature This item is used to set the system temperature upper limit When the temperature exceedsthe set value the system will shut down automatically This function works only when your operating system is supporting ACPI CPU Smart Fan Control This option is used to enable or disable CPU smart fan function Security FOX bLIO Foxconn Bios Setup Utility Set Administrator Security configuration Password Administrator Password User Password Administrator Password This item is used to install or change administrator password After you input administrator password it then will ask you to confirm the password User Password This item is used to install or change user password Only when there exists a Administrator password then this setting can be activated gt Secure Boot menu Press Enter to go to its submenu Save amp Exit Foxconn Bios Setup Utility Reset the system af ter saving the changes Boot Override Save Changes and Reset If you s
24. ys the basic system configuration such as CPU Name memory size system date time and 50 on They all can be viewed or set up through this menu F Center The advanced system features can be set up through this menu Advanced The advanced system features can be set up through this menu Boot Boot features can be set up through this menu You can set the boot device priority and enable Quiet Boot feature here Power All the items related with Green function features can be setup through this menu Health This setup enables you to read change fan speeds and displays temperatures and voltages of your CPU System Security The Administrator User password can be set up through this menu to prevent unauthorized use of your computer If you set a password the system will ask you to key in correct password before boot or access to Setup Save amp Exit The optimal performance settings can be loaded through this menu However it may offer better performance in some ways such as less I O cards less memory etc still it may cause problem BIOS SETUP a p AE if you have more memory or I O cards installed It means if your system loading is heavy set to optimal default may sometimes come out an unstable system What you need now is to adjust BIOS setting one by one trial and error to find out the best setting for your current system You also can save or discard the changes and exit BIOS setup here
Download Pdf Manuals
Related Search