Philips 29PT9021/05 CRT Television User Manual
Contents
1. Press of the remote control to recognise which programme is being broadcast gt The menu MANUAL INSTALLATION disappears temporarily C Is the reception poor You may be able to improve the reception of picture and sound of a TV channel by adjusting the frequency with the P or key on the remote control The frequency is adjusted in the block shown in the upper left corner of the screen Go onto 3 if you want to store the channel that has been found Do you want a different channel o Press OK again to restart the search 0 060M OO No channel found o Interrupt the searching by pressing the keys a or w or the MENU key Check that you have selected the correct TV system or that the aerial is connected properly See Tips p 36 O oO Vo O oO 0 0 Direct selection of a TV channel If you know the frequency or the C or S channel number it can be entered directly with the digit keys on the remote control and in this way call up the TV channel Ask for alist from your cable company or dealer alternatively consult the Table of frequencies on the inside backcover of this handbook Select Search with the keys a or vw Enter the 3 digits of the desired frequency or the 2 digits in case of C or S channels For frequencies under 100 MHz first enter a 0 For example 063 The frequency is automatically finetuned Have you entered a wrong number First complete the frequency or the channel2. all menus are presented in the language of your choice Have you pressed the wrong key Press OK again and make a new choice Select Country Press the keys w or a to select Country Country lights up Press OK The menu COUNTRY appears Select the country where you are now located with the keys vV A 4 0r and press OK Select Other when none of the countries applies The INSTALLATION menu reappears Menu Language Country Automatic Installation Manual Installation Give Name Reshuffle Favourite Programmes TV Configuration Decoder Descr ambl er Automatic Installation AUTOMATI C NSTALLATI ON Searching O 100 Store TV channels This can be done in two different ways automatically or manually Automatic installation cssssssssssssesse OF Manual installation All TV channels are searched for and W ith manual installation it is possible to stored automatically As far as it is select whether TV channels are searched transmitted by the cable company or a TV for by frequency or channel number channel a programme number and a name is attributed auto matically as well and filled Follow very closely and step by step the in in the programme list instructions of the Manual Installation If you wish the order of programme procedure numbers and names of stored TV channels You must go through every step can be modified afterwards Follow very closely and step by step the Go on to page 6
3. MENU PI CTURE SOUND FEATURES PROGRAMME S Menu Language Country Automatic Installation Manual Installation Give Name Reshuffle Favourite Programmes TV Configuration Decoder Descrambl er English UK Ot her 0 gt gt 0 vovov vyoy yoO oyoyo Switch TV on Press the power switch on the front of your set A green or red lamp lights up on the front of your set gt The TV is switched on but the screen stays dark Your TV is on standby o Press a digit key on the remote control gt The TV switches on The screen lights up The green lamp blinks every time you press a key on the remote control Select the menu language You can now choose which language the menus are presented in W hen you switch on your set for the first time the MENU LANGUAGE automatically appears on the screen See the explanation on your screen Alternately the explanation automatically appears in the different languages If the MENU LANGUAGE menu does NOT automatically appear on the screen proceed as follows Press MENU on the remote control The MAIN MENU appears on the screen Keep the key w pressed and select INSTALLATION INSTALLATION lights up Press OK The INSTALLATION menu appears and Menu Language lights up Press OK The MENU LANGUAGE appears Select the language of your choice with the keys a w or lt and press OK The INSTALLATION menu reappears From this point on
4. Operate the video recorder with the TV remote control OO ooo OOOO Soo 00000 O Most of the audio and video equipment from our range of products can be operated with the remote control of the TV Press repeatedly on the M key of the remote control until the designation VCR10r VCR2is indicated by the arrow and according to which connected video recorder you want to operate Press one of the video recorder keys of the remote control E for stop lt lt for rewind gt for play gt for wind for timer for record to run quickly through the TV channels from your video recorder tuner The digit keys to select TV channels from your video recorder tuner The standby key 5 to switch off the video recorder temporarily Tips Care of the screen Clean the TV with a slightly damp soft cloth Do not use abrasive solvent as it can damage the TV screen coating layer Poor Picture Have you selected the correct TV system Is your TV set or house aerial located too close to loudspeakers non earthed audio equipment or neon lights etc Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the outside aerial Is the picture or teletext unrecognisable Check if you have entered the correct frequency See Installation p 7 Are brightness and contrast out of adjustment Press the PP key Switch off your TV
5. Place the loudspeakers in the corners of an imaginary square Mono broadcasting Select Spatial On You get a pseudo stereo effect Stereo broadcasting Select Spatial On You get a Spatial stereo effect Headphone See Connect Peripheral Equipment p 31 for the connection of your headphone if you want to use it Select Headphone with the keys w or a and press OK The HEADPHONE menu appears First select Source with the keys w or a Source lights up Press the keys lt or to select the source you want to listen to with your headphone Automatic TV EXT1 EXT2 EXT30r FRONT Select Automatic if you want to listen to the sound of the picture you are watching on the screen Exception if you are watching a programme from an external source in the pip picture you will hear this sound through your headphone Select TV when you want to listen to the sound of aTV channel via your TV tuner and watch a programme via your video recorder or other peripheral E g you can watch a film from your video recorder but listen to the commentary of a broadcasted football match In all other cases select the source where you connected your equipment The equipment should be switched on but you don t need to watch it Select with the keys w or a the adjustments Volume or Balance The selected adjustment lights up Press the keys lt or to regulate the selected adjustment Press MENU The SOUND menu reappears The Volume and
6. SOUND with the keys a or vw Press the keys lt or to select the preferred sound mode Stereo or Mono if the channel transmits stereo sound Digital Sound or Digital Sound available if the TV channel transmits digital sound Switch Loudness on or off W hen Loudness On is selected the low and high frequencies are amplified so that the natural balance is restored when listening to low volume sound The selected setting for Loudness is stored for all TV channels Select Speech W hen Speech Onis selected the treble settings are revealed and the bass settings are suppressed The selected setting is for Speech is stored for all TV channels Vol ume Bal ance Treble Bass Sound Mode Loudness Speech Spatial Incredible sound Headphone HEADPHONE Vol ume Bal ance Source oyo 0 0 oyoyo 0 yooyo Select spatial and surround sound Incredible sound W hen Spatial On is selected it seems as though the loudspeakers are spread further apart from one another You get a spatial sound effect You get a super spatial sound effect when Incredible Sound On is selected You achieve a Surround Sound effect if you have 2 or for a maximum effect 4 extra loudspeakers connected See Connect Peripheral Equipment p 31 In case of 4 extra loudspeakers connect them to FRONT and REAR Put the loudspeaker switch on the back of the TV in the aK position The internal loudspeakers of your TV are now switched off
7. TV Switch your TV on Press lt gt repeatedly until the indication FRONT appears on the screen Switch on your equipment The picture is reproduced If you want to watch the TV picture again Enter the programme number of the TV channel which you want to watch with the digit keys Audio Output Ext2 Output CD i Photo CD Information Line Sl eepti mer PLP Size Child Lock General PP store Message Ti mers Recording Source O O 0 0 0O 0 0 fo 0 oOo O O0Oo0 0o 0 0 Record with your video recorder If you have connected a S VHS video recorder you can only record S VH S quality from a S VHS peripheral connected to the front side of the TV or froma S VHS peripheral connected immediately to the S VHS video recorder E g from a S VHS camcorder In this case go on as follows Press MENU Select TV Configuration in the INSTALLATION menu with the keys a or w and press OK Select Ext2 Output with the keys a or v Select S VHS Quality with the keys lt or In all other cases whether you record with a VHS or S VHS video recorder select VHS Quality Keep MENU pressed for a short while to switch off each menu Record a TV programme only using an aerial cable Select the programme number on your video recorder Set your video recorder to record See the handbook for your video recorder using a eurocable connected to the euroconnector EXTERNAL 2 W ith a video recorder conn
8. overnight with on the front of the TV Sometimes poor picture quality is possible when having activated a S VHS camera or camcorder connected to the front of your TV and another peripheral is connected to EXT10r EXT2at the same time In this case switch off one of the other peripherals No picture Is the aerial connected properly Are the plugs tightly connected in the aerial socket Is the aerial cable in good condition and does it have suitable plugs Are the connection facilities to a possible second TV in good condition If in doubt consult your dealer No picture means that the aerial peripheral equipment is transmitting no picture Have you pressed the correct keys on the remote control Try once more Did you press again after switching on teletext Has the child lock been switched off See Features p 17 End of life directives Sound Did you perhaps interrupt the sound with the mK key W ere the internal loudspeakers switched off by the switch on the back of your TV set See Extra loudspeakers p 31 Is the sound coming out of only one loudspeaker Is the balance perhaps set to one extreme See SOUND menu p 14 Select Spatial On in the Sound menu if there is no sound coming out of the extra loudspeakers at the back See Spatial p 15 Remote control If your TV no longer responds to the remote control Check whether the remote control is in the TV operation position Press the TV key o
9. 0 0 Message W ith this function you can enter a personal message which will be displayed automatically when the set is switched on from standby E g l Il be late this evening Don t wait for dinner Select Message with the keys w or a Press OK The MESSAGE menu appears and consists of a message part and a selection menu Select Change with the keys a or w and press OK A block appears on the first position of the first message line Select with the a or w keys the letter or number you want to enter Select with the key the next position Enter the letters or numbers You can enter text on 2 lines of 27 characters each Did you fill in a wrong letter or number Select with the lt or keys the position of the letter or number you want to modify Select with the a or w keys the correct letter or number Press OK when you have entered the complete message Press the a or w keys to make a different selection in the message menu Remove message Select Clear and press OK to remove a previous message The previous message is removed Message type Select Type Type lights up Press the keys lt or to select the way the message to be displayed Wipe Slide Fall or Fade Run message Select Run Run lights up Press the keys lt or to select the displaying frequency Continuous Once or No Display message Switch the TV to standby The message appears on the screen the moment the TV is switche
10. Balance adjustment can be stored for all the TV channels with General PP store in the FEATURES menu Adjust the basic picture and sound settings with the Local Menu key Should your remote control be lost or broken you can still change some of the basic picture and sound settings o Press the LOCAL MENU key at the front of the TV M 00000 gt The adjustment Volume including a bar appears on the screen o Press the key V or behind the door at the front of the TV to adjust the Poe volume o Press the Local Menu key again or repeatedly to select a following adjustment gt The adjustments Volume Brightness Colour Contrast Treble or Bass including a bar appear on the screen o Press the key V or at the front of the TV to regulate the selected adjustment Press the Local Menu key again after you selected the last adjustment gt The local menu adjustments disappear 0 The Local M enu automatically switches off when after 10 sec no action has been executed Sl eepti mer PiP Size Child Lock General PP Store Message Ti mers Recording Source Q sec Good Night vovo Vovo Features Select FEATURES in the MAIN MENU with the keys w or a and press OK The FEATURES menu appears Use the keys w and a to make your selection in the FEATURES menu Your selection lights up Sleeptimer W ith the aid of the sleeptimer you can set a time period after which the TV sho
11. English Contents Installation Search for and Store TV channels Automatic installation Manual installation Operation 11 12 12 14 17 21 24 26 29 36 37 p 33 C selection of ExT1 EXT2 EXT3 OF FRONT M selection of connected peripheral equipment TV TV operation Menu p 11 MENU menu on off A j lect your choice a gt select y p 11 1 volume key ok activate your choice aK sound temporarily switched off p 21 vertical squeeze II bilingual choice p 28 continuous subtitles Teletext p 26 teletext on off CO direct txt page or subject selection txt index page interrupt txt page mix tv txt picture enlarge solution to riddles time display 0 O lt gt NXE brightness p 22 Picture In Picture for TV sets with pip p 24 switch pip on off C3 select connections C3 switch screens still picture 3 move pip screen P channel selection of pip screen Your remote control gt O OC 9 OON P E 0101 a000 a009 OO 00000 DOODO SOO O O gt 0000 8 PP ast p 11 switch to standby p 11 TV channel selection p 21 info on screen previous programme Video recorder stop p 35 rewind play wind programme timer record p 22 freeze the picture reduce image noise mosaic screen personal preference p 12 14 picture and sound settings Installation Preparation Place the TV on asolid surface For ventila
12. STALLATION appears 0 eha z In the left upper corner of the screen a programme number a system 2 12 a frequency or possibly a channel number are displayed 3 8 13 gt Selection Mode is only present and lights up if the country you selected in 4 9 ae the COUNTRY menu also offers the channel option RANURI a G In this case you can choose either channel or frequency mode Car e Search o Press the keys lt or to select frequency C channels aerial channels or sae No S channels broadcast by a cable company ORE Select the TV system Television pictures are not broadcast in the same way in all countries W e speak of different television systems PAL SECAM NTSC o Select System with the keys a or v You have your own aerial 05 Or Youare connected to a cable system o Select the country or part of the world o Select the country or part of the world from where you want to receive the TV where you are now located channel with the keys or lt Goonto2 2 Search for a TV channel o Select Search with the keys a or wand press OK gt The TV searches for a channel gt The frequency or the channel number increases until a TV channel is found Dependent on the choice you made in the selection mode the searching stops at a frequency or at a channel number gt Inthe bar which may appear briefly at the bottom of the screen the broadcaster may transmit its programme name or another message
13. a or w the desired subject and pagenumber Press OK The selected page appears E o0o000o DODAO SOQ 0000 0 o oo0 0 Select Continuous Subtitles TV channels which broadcast teletext often transmit certain programmes with subtitling Sometimes more than one subtitle page is available For each TV channel you can store a subtitle page which will be displayed continuously if the programme being broadcast is transmitted with subtitles Press in order to switch on teletext Select the proper subtitle page with the digit keys The selected subtitle page appears and also the subtitles when the programme transmitted is subtitled Press on the remote control The message Subtitle stored appears Press in order to switch off teletext Every time a programme of the selected TV channel is subtitled the subtitles will be available W hen there are no subtitles available only is displayed on the bottom of the screen Press on the remote control to switch the subtitles on or off The message Subtitles On or OFF appears For every TV channel the subtitle page should be stored separately with the key on the remote control Select Special teletext functions Press in order to switch on teletext O pen the door of the remote control Interrupt Press X The TV programme appears WB at the top of the screen indicates that you are still in the teletext mode Before i
14. al loudspeakers of your TV are now switched off EXTERNAL T fo Gad9 Vm VCR 1 Decoder Cable TV offers you a wide choice of programmes Most of them are free others are to be paid for by the viewer This means that you will need to subscribe to the broadcasting organisation whose programmes you wish to receive This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled For further information ask your dealer See also the booklet supplied with your decoder Connect a decoder with an aerial socket to the TV Connect the aerial cables and as shown alongside W hen your decoder has a euroconnector you can obtain better picture quality if you connect a eurocable to EXTERNAL 1 Connect a decoder without an aerial socket to the TV Connect the decoder to your TV with a eurocable only Connect the decoder to the video recorder Some video recorders have a special euroconnector for decoder Connect a eurocable to the euroconnector of your decoder and to the special euroconnector of your video recorder See also the handbook of your video recorder o To connect your video recorder to the TV see p 29 See Define D ecoder D escrambler prog numbers as well p 10 If you want to connect more equipment to your TV consult your dealer yoo yooo A o 0 Reproduce Picture and Sound of connected peripheral equipment Most of the audio and video equipment f
15. andbook for your video recorder Enter the Installation menu via the Main menu Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals See Installation Searching for and storing TV channels Manual Installation p 6 Store the test signal either under programme number 0 or between 50 and 99 Replace the aerial cable in the aerial socket 1r of your video recorder once you have stored the test signal TV video recorder and other peripherals except C D i Photo CD Connect the aerial cables and as shown opposite Better picture quality can be obtained if you also connect eurocable to EXTERNAL 2 and a eurocable to EXTERNAL 10r 3 Look for the test signal of your peripheral in the same way as you do for a video recorder If you have more peripherals they can also be connected to each other with an extra aerial cable and an additional eurocable W hen a video recorder is connected to EXTERNAL 1 you can only record a programme from your TV Only when a video recorder is connected to EXTERNAL 2 it is possible to record a programme from your TV as well as from other connected equipment See Record with your video recorder p 34 EXTERNAL Be Audio Output Ext2 Output CD i Photo CD Information Line 0 Vovovoyvyvovyvoyo TV and aCD i Photo CD Connect eurocable as shown opposite Press MENU on the remote control T
16. d on again W hen you selected Once the message will disappear from the screen after 30 seconds W hen you selected Continuous the message will appear on the screen continuously until the TV is switched off with the power key on the front of the TV The message does NOT appear when C ontinuous Subtitles have been switched Onand is displayed on the bottom of the screen See Teletext p 26 Timers 3 See W ith the Timers menu you can make your TV automatically switch to a Child Lock specific programme number from standby or switch over to a different General PP Store programme number at a specific time Message Ti mers o Select Timers with the keys w or a in the FEATURES menu and press OK gt The TIMERS menu appears and Actual Time lights up Recording Source Actual time Actual Time On prog no 1 or under the lowest Or On prog no 1 or under the lowest Programme favourite programme number you have favourite programme number you have Start Time installed a TV channel which also installed a TV channel which does NOT cancel Ty Wer broadcasts teletext See Teletext p 26 broadcast teletext See Teletext p 26 gt The time is downloaded from that TV gt The time is set to and should be set channel manually o Incase you want to enter another time o Enter the actual time with the digit keys use the digit keys gt The displayed time is updated every gt The time entered manually is updated minute and remains unt
17. ected to EXTERNAL 2 it is possible to record a programme from your TV as well as from other connected equipment Select the programme number on the TV Press MENU Select FEATURES with the keys w or a and press OK Select Recording Source with the keys w or a Press lt or to select the source you want to record Auto or TV Select Auto if you want to record what you are watching on the screen Select TV when you want to record a programme from a TV channel while you are watching a programme from connected equipment 2nd VCR CD i Press MENU twice The FEATURES menu and the MAIN MENU disappear Set your video recorder to record See the handbook for your video recorder using a eurocable connected to the euroconnector EXTERNAL 1 W ith a video recorder connected to EXTERNAL 1 you can only record a programme from your TV Select the programme number on the TV Set your video recorder to record See the handbook for your video recorder Record a programme from Audio Video equipment connected to EXTERNAL 1 EXTERNAL 3 Or FRONT Switch on the equipment Press MENU Select FEATURES with the keys w or a and press OK Select Recording Source with the keys w or a Select the connection EXT1 EXT30r FRONT from which you want to record with the keys lt or gt Press MENU twice The FEATURES menu and the MAIN MENU disappear Set your video recorder to record See the handbook for your video recorder VCR
18. elected TV channel after the indication disappeared from the screen You can select the DNR setting for each channel separately PP key W ith the green PP key you can call up the picture and sound adjustments which have been stored with General PP Store in the Features menu p 17 Open the door of the remote control o Press PP 0 oyo oyo oyo 00000 Mosaic screen for TV sets with the Picture in Picture option O pen the door of the remote control Press A menu line MOSAIC appears on the bottom of the screen It contains three functions Scan Photo Fin Strobe Select with the keys or the function you want to activate and press OK Scan A scan of the stored TV channels is performed starting with the favourite programme stored under the lowest programme number Only TV channels placed in the favourite list are displayed O n the last position a live picture is shown of the programme that was displayed before the mosaic screen was switched on W hen you were watching a picture from a peripheral and your set does not have the pip option a picture of the following favourite TV channel appears in the last position Press OK again A following series of stored TV channels from the favourite list is scanned Each mosaic picture will contain its identifying programme number and name Select aTV channel with the digit keys The mosaic screen disappears and the selected TV programme i
19. en the TV channel broadcasts in digital sound Dual I or I appears briefly on the screen The setting is stored in the memory for the selected TV channel when switching to another TV channel or to standby You can select Dual for each TV channel separately Information on screen After the selection of aTV channel or a programme from a peripheral or after pressing the key the following information may appear briefly or continuously on your screen e the programme number and name of the selected TV channel e information from the broadcaster in a bar at the bottom of the screen e g the name of the TV channel the programme title or another message Digital Sound available if the TV channel transmits digital sound e the currently selected sound mode if the TV channel transmits stereo or digital sound not with a programme from a peripheral or coming from a decoder 8K Sound muted when the sound is temporarily interrupted e the name of the pip connection if PiP is switched on for sets with the PiP option See Pip Picture in Picture p 24 e Dual I or 7 in case of bilingual broadcast e the input quality of the selected peripheral connected to a euroconnector Y C S VHS quality CVBS normal picture quality RGB improved picture quality eg from a C D i Photo CD e the selected DNR setting see p 22 Permanent Programme Number Press for along time The permanent programme number remains in the upper right corner o
20. eneral PP Store p 17 to store the same volume adjustment for all the stored TV channels Temporarily interrupt the sound Press mK The sound is temporarily interrupted Press mK again to get the sound back Switch menus on and off Press MENU on the remote control The MAIN MENU appears Use the keys a and w to make a selection of the Main Menu items Your selection lights up Press the OK key on the remote control to activate the selected menu Press MENU again to return to the previous menu Keep the MENU key pressed to switch off all menus Main Menu Select the picture settings During manufacture four types of picture setting have been pre defined You can choose among these four different settings with the PICTURE Key of the smart controls on the door of the remote control SMART CONTROLS o Press the Smart Controls key PICTURE repeatedly to select Soft Natural Rich or Personal gt The picture setting possibilities are displayed briefly on top of the screen The picture settings correspond with a specific predefined setting of Contrast Colour Sharpness and Dynamic Contrast Personal refers to the personal preference settings of contrast colour sharpness and dynamic contrast you can adjust in the PICTURE menu and store with General PP store in the FEATURES menu an Adjust picture settings PI CTURE o Press MENU on the remote control SOUND gt D pa a appears and PICTURE lights up FEATURES o Pres
21. f the screen when it was off or disappears when it was on Select previous programme Press the pp key The previously selected TV channel is displayed 0o09 o0900 QO OOOO 0000 2 pp Clock Open the door of the remote control o Press E9 gt The time downloaded from the TV channel with teletext stored on programme number 1 or under the lowest favourite programme number or entered manually in the Timers menu appears in the upper left hand corner of the screen This is not possible when Continuous Subtitles have been switched on and E is displayed on the bottom of the screen See Teletext p 28 o Press again in order to switch off the clock Adjust Brightness Open the door of the remote control o Press O or in order to adjust the brightness Freeze the picture O pen the door of the remote control Press Cy The picture is frozen Press Cy in order to get moving pictures again oyoo DNR W ith DNR you can reduce the image noise and so improve picture quality when receiving weak signals o Open the door of the remote control o Press DNR repeatedly to select DNR min DNR med DNR max or DNR off DNR med offers you optimum picture quality and is the usual setting for normal strength signals DNR max should only be used for poor picture quality gt Your selection appears for amoment at the top of the screen The setting is stored in memory for the s
22. f the TV channel appear in a black block Use the keys a w gt or to move to the number where you want to locate the TV channel Press OK The TV channel moves to the selected programme number The TV channel which was located on that position automatically moves to the programme number of the TV channel you have modified Repeat this for all the other TV channels you want to swap W hen all the TV channels are allocated as you like Press MENU The INSTALLATION menu appears again Select Favourite TV channels During the installation all the stored TV channels have automatically been placed into the favourite list This will make selection of only your favourite TV channels a lot easier and faster In the Favourite Programmes menu you can indicate for each TV channel if you want to keep that TV channel as a favourite You can also do this for a programme number reserved for the programmes you receive from your decoder After leaving the installation you can quickly run through the TV channels by pressing the P or Only those TV channels which are in the favourite list will be displayed The non favourite TV channels can still be selected with the digit keys Select Favourite Programmes with the keys a or w and press OK The FAVOURITE PROGRAMMES menu appears Programme Number lights up Select the programme number of a TV channel with the digit keys Select Favourite with the keys a or vw 0 of Press the keys o
23. g the key on the remote control aTV channel which broadcasts teletext may transmit the name of the TV channel or the programme name or another message which appears briefly in the information line at the bottom of the screen Press the keys lt or to select Off The information line will only appear after pressing the key on the remote control see p 21 and not after the selection of a TV channel Press MENU The INSTALLATION menu reappears Define Decoder Descrambler prog numbers DECODER Programme DESCRAMBLER Decoder Status ov oyo If you have connected a decoder or a descrambler see p 32 you can define one or more programme numbers as decoder programme numbers Select Decoder Descrambler with the keys a or w and press OK The DECODER DESCRAMBLER menu appears Select Programme with the keys a or vw Programme lights up Select the programme number under which you have stored the programme coming from your decoder with the digit keys Select Decoder Status with the keys a or vw Decoder Status lights up Press the keys or to select Off ExT1or EXT2 the euroconnector where you connected your decoder Select Offif you do not want the selected programme number being activated as a decoder programme number Fast exit from the menus Keep the MENU key pressed to switch off all menus K Sound Muted Operation To be operational with the remote control Every time you press a key on the re
24. ge Stored appears briefly on the bottom of the screen You have created and stored a new Personal picture setting Tint Press lt or to select the colour temperature Normal Warm or Cool Press OK The PICTURE menu reappears Digital Scan Line Flicker Reduction In certain circumstances while watching TV programmes it may be preferred to switch off the digital scan line flicker reduction Press the keys lt or to select Onor Offand press OK The PICTURE menu reappears Dynamic Contrast Press the keys lt or repeatedly to select Off Min Med or Max and press OK The PICTURE menu reappears To make the contrast between darker and brighter picture parts more outspoken it is preferred to select Med or Max In certain circumstances it may be preferred to select Min or Off Press MENU The MAIN MENU reappears Press MENU again to switch off the MAIN MENU SMART CONTROLS Vol ume Bal ance Treble Bass Sound Mode Loudness Speech Spatial Incredible sound Headphone Sl eepti mer Pip Size Child Lock General PP store Message Ti mers Recording Source ovyoyo o Select the sound settings D uring manufacture 6 types of sound style have been pre defined You can choose among these six different styles with the SOUND key of the smart controls on the door of the remote control Press the Smart Controls key SOUND repeatedly to select Standard Incredible Sound Music Movie Su
25. gether with the names you entered for the connected peripheral equipment appears Programme numbers from the favourite list are displayed in white characters Programme numbers which are not in the favourite list are displayed in black characters The current TV channel on the screen is indicated with a black block Press the keys w or a to select a TV channel within the column Press the keys lt or to select another column of the programme list Press OK to select the desired TV channel Press MENU twice The MAIN MENU disappears Ii PaP Vo y o Other functions Vertical Squeeze Movies and other new programmes may in the future be broadcast in a W ide Screen format Satellite programmes in the W ide Screen picture format recorded on a video recorder or prerecorded W ide Screen tapes can be reproduced on a normal TV screen in a conventional picture format Press 4 The picture is compressed There are black bars at the top and bottom of the screen The message Vertical Squeeze appears for a moment in the left upper corner of the screen Press again to switch off vertical squeeze W hen you have a W ide Screen format video recorder connected with a eurocable the pictures will be compressed auto matically Bilingual broadcast Press the key LIZ repeatedly to select language I or when the TV channel broadcasts in 2 languages dubbed or original language e g Eurosport or to select analogue or digital wh
26. h channel which broadcasts teletext transmits a page with information on how to use its teletext system Look for the teletext page with the main index usually page 100 TV programmes are sometimes subtitled for the hard of hearing Depending on the TV channel teletext is transmitted in different systems The system utilised can be recognised by the options line at the bottom of the screen The colours used in the options line correspond with the colour keys under the door of your remote control About the Easy Text system select and which results in in transmission switching to standby 0 0 The Easy Text system makes use of a memory with a high level of intelligence By making maximum use of this intelligence it is possible that in most cases the selected page appears on the screen almost immediately The only condition is that the teletext broadcast of the particular TV channel is switched on for at least half a minute The major advantages of this Easy Text system are A considerable reduced waiting time by predicting what you will probably e a fast and direct selection of previous and following pages which are e the precapturing of the page numbers referred to in the displayed page e the direct selection of the pages referred to in the options line e the creation of a habit watcher list frequently used pages are put in a list of preferred pages so that they are immediately available afterwards The
27. h the keys a or w and press OK The GIVE NAME menu appears Select the TV channel to be modified or assigned a name with the keys a w gt or lt and press OK A block appears on the first position of the name Select with the keys or the position of the letter or number you want to change or to enter Select with the keys a or w the letter or number you want to enter or to correct A space numbers or other special characters are located between Z and A Did you fill in a wrong letter or number Select with the keys or lt the position of the letter or number you want to modify Select with the keys a or w the correct letter or number W hen the complete name is filled in Press OK Select another TV channel to be modified or assigned a name with the keys A V gt or lt and press OK Repeat as described above W hen you have finished entering or modifying programme names Press MENU The INSTALLATION menu reappears Reshuffle the programme list 0 0 According to your preference you can change the order of the stored TV channels W hen you are satisfied with the order of the programme list go to page 9 Select Reshuffle with the keys a or w and press OK The menu RESHUFFLE appears Select the TV channel you want to change the programme number of with the keys a w 4 or and press OK Use the keys lt or to select another column of the programme list The programme number and the name o
28. he MAIN MENU appears on the screen Keep the key w pressed and select INSTALLATION INSTALLATION lights up Press OK The INSTALLATION menu appears Select TV Configuration with the keys w or a and press OK The TV CONFIG menu appears Select CD i Photo CD with the keys w or a CD i Photo CD lights up Press the keys lt or to select Present This offers you optimum picture quality for your CD i or Photo CD Audio equipment You can listen to your TV sound via your audio equipment Connect the audio cables to the audio input of your audio equipment and to AUDIO L and Rat the back of your TV Make your audio output selection in the TV Configuration menu See p 10 Camera and camcorder Connect your camera or camcorder at the front side of your TV Connect the equipment to VIDEO and AUDIO L Q for mono equipment Also connect AUDIO R Q for stereo equipment S VHS quality with a S VHS camcorder is obtained by connecting the S VHS cables with the s vHs input and aupio inputs Headphone o Insert the plug into the headphone socket 4 at the front of the TV M o Press mK on the remote control to switch off the internal loudspeakers of 0000 00000 your TV The headphone socket has an impedance of between 8 and 4000 O hm and is of the 3 5 mm jack type In the SOUND menu select Headphone to adjust the headphone volume and balance and to select the audio source for your headphone sound See p 15 E
29. il the TV set is every minute and remains until the TV set switched off with the power key is switched off with the power key If you filled in an incorrect digit o First complete the actual time with arbitrary numbers and then start again Programme Select Programme with the keys w or a Programme lights up Enter with the digit keys the programme number of the TV channel you want your TV to switch over to ovo Have you entered a wrong number o Enter the right digit s again Start time Select Start Time with the keys w or a Start Time lights up Enter with the digit keys the start time of the selected TV programme you want your TV to switch over to oyo gt At the programmed time your TV will OF gt atthe programmed time your TV will switch over from standby to the selected switch over to the selected programme programme number number when you are watching another gt The start time is reset to TV channel gt The start time is reset to Cancel timer Select Cancel Timer with the keys w or a and press OK gt Cancel Timer lights up and the Start Time is reset to 0 o Press MENU The FEATURES menu reappears Vv NSTALLATI ON 0 Recording Source See Peripheral Equipment Recording with your video recorder p 34 Select Programme list Select PROGRAMMES with the keys w or a in the MAIN MENU and press OK A page with an overview of stored TV channels to
30. instructions of the Automatic Installation yooyo V 0 Automatic installation Select Automatic Installation with the keys a or w and press OK The menu AUTOMATIC INSTALLATION appears Press OK again Press the keys or to select On The message Searching appears as the TV searches for all the channels available in your area The automatic installation can be interrupted by pressing the MENU key Every time a TV channel is found it is automatically placed under the next free programme number in the programme list The message Ready appears on the screen when the automatic installation is complete The programmes are stored in the programme list after the message has disappeared If a cable system or a TV channel transmitting a teletext page with the frequencies and programme names of all the TV channels which can be received is detected the search is stopped and a programme list appears The programme list is auto matically filled with all the programme numbers and names of the TV channels transmitted It is possible that the cable company or the TV channel displays a broadcast selection menu Layout and items are defined by the cable company or the TV channel M ake your choice of the presented possibilities with the keys w or a and press OK Press MENU The INSTALLATION menu reappears Go on to page 8 Manual installation Select Manual Installation with the keys a or w and press OK gt The menu MANUAL IN
31. mote your TV should be in the TV operation control a green lamp on the front of your position TV set blinks If this is not the case first press the TV key left of the display The letters TV in the display of the remote control appear in a black block for a few seconds 0 ooo0oyoyo Switch TV on Press on the front of your TV A green lamp lights up and the programme appears Does a red lamp light up Your TV is on standby Read on Switch to standby Press the red standby key at the top of the remote control to switch the TV off temporarily A red lamp on the TV lights up Press the digit keys or P or in order to switch the TV on again If for a period of 10 minutes no aerial signal is received then your set automatically switches to standby Your TV consumes energy in the standby mode Energy consumption contributes to air and water pollution W e advise to switch off your TV overnight instead of leaving it on standby You save energy and the picture tube is demagnetised which maintains good picture quality Select TV channels Select the TV channel with the digit keys or with the key P or onthe remote control For atwo digit programme number enter the second digit within 2 seconds Quickly run through the TV channels from the Favourite list Press the P or key repeatedly Adjust the volume Press 4 or If you want to store the volume adjustment in the memory see the Features menu G
32. nce more Perhaps the batteries are exhausted See Preparation p 3 You can still use the Local Menu keys at the front of your TV Menu Have you selected the wrong menu Press MENU again to exit from the menu Connections Check whether your peripheral equipment is properly connected See p 29 Have you switched on the peripheral equipment No solution Switch your TV set off and then on again Never attempt to repair a defective TV yourself Check with your dealer or call a TV technician when in doubt Your new TV contains materials which can be recycled and reused At the end of life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of Please ensure you dispose of your old TV set in accordance with any local regulations How to dispose of exhausted batteries The Philips batteries supplied do not contain the heavy metals mercury and cadmium N evertheless in many countries exhausted batteries may not be disposed of with your household waste Please ensure you dispose of exhausted batteries according to local regulations Index a analogue 14 audio equipment 30 audio output 10 automatic installation 5 b balance 14 bass 14 bilingual broadcast 21 brightness 22 c C channels 6 camcorder 30 CD i Photo CD 30 child lock 17 clock 22 colour 12 colour keys 26 contrast 12 country 4 d decoder desc
33. nterrupting teletext you can select a page number The page number appears on your screen Press X again Teletext reappears Mix Press The teletext page and the TV programme appear on the screen at the same time Press again O nly the teletext page is displayed Enlarge Press to enlarge the top half of the teletext page Press the keys a or w to scroll the text line per line Press again to enlarge the bottom half of the teletext page Press once more to return to normal page size Reveal Press to call up concealed information such as solutions to riddles and puzzles Press again in order to switch off the concealed information Connect Peripheral Equipment Zz BLE r r EXTERNAL 2 2 3 1 n J 3 5 5 k CABLE EXTERNAL 2 3 LL PRP i m ee e VCR EXTERNAL 3 LRR Te abi There is a wide range of audio and video equipment that can be connected to your TV The following connection diagrams show you where the different equipment should be connected at the back or the front side of the TV TV and video recorder Connect the aerial cables and as shown opposite Better picture quality can be obtained if you also connect a eurocable Search for and store the test signal of the video recorder Unplug the aerial cable from the aerial socket m of your video recorder Switch on your TV and put the video recorder on the test signal See the h
34. number with arbitrary numbers and then start again Go onto 3 Enter the programme number N ow assign a number of your choice to the TV channel you have located In this way you decide the order of all your TV channels Select Programme Number with the keys a or v Select with the keys or or with the digit keys the desired programme number Go onto 4 Store steps 1 to 3 Now the steps 1 to 3 must be stored in the memory Select Store with the keys a or w and press OK Stored appears briefly at the bottom of the screen The programme number and probably the programme name are stored in the programme list after the message has disappeared If you want to store another TV channel Repeat to O If you are connected to acable system Begin immediately with You have already selected the TV system in for all channels If you have finished storing TV channels Press MENU The INSTALLATION MENU reappears 90 hil 92 93 94 95 96 I7 0 gI 92 oe 94 95 96 Sh 98 99 EXT1 EXT2 EXT3 FRONT Enter or modify a programme name 0 1 BBC1 2 BBC2 ENE 0 It is possible to change the name stored in the memory or to assign a name to aTV channel which has not yet been entered A name with a maximum of 5 letters or numbers can be given to the programme numbers 0 to 99 For example SUPER BBC 1 Between 99 and 0 you can also name any peripherals that are connected Select Give Name wit
35. pages are stored in the memory when switching off teletext or when The precapturing of all the subpages to be controlled by the teletext user Switch Teletext on and off Select the TV channel for the desired teletext broadcast Press in order to switch on the teletext If teletext is switched on when a menu is on the screen the menu will automatically be removed gt The main index page appears on the screen together with two information lines at the top and one option line at the bottom of the screen Vo The TV channel reappears Press again in order to switch off teletext Select a Teletext page With the digit keys 00 0 0 Enter the desired page number with the digit keys The page counter seeks the page or the page appears immediately when the page number has been stored in the memory A message appears when you have entered anon existent or an incorrect page number Page numbers beginning with 0 or 9 do not exist Enter the correct page number OF With the option line o Select with the colour keys corresponding to the coloured options at the bottom of the screen and depending on the teletext system the selected TV channel transmits the previous lt amp or the following pages the 2 previously selected pages another subject Quickly run through the teletext pages O oO Press w to run through the previous pages Press a to run through the following pages Select the previo
36. perbass or Personal The sound styles are displayed briefly on the top of the screen Each sound style corresponds with a specific predefined setting of the treble and bass adjustments Personal refers to the personal preference settings of volume balance treble and bass you can adjust in the sound menu and store with General PP store in the FEATURES menu Adjust sound settings Press MENU on the remote control The MAIN MENU appears Select SOUND with the keys a or w and press OK The SOUND menu appears Select with the keys a or w the adjustments of Volume Balance Treble and Bass Press the keys lt or to change the selected adjustment The sound style is set to Manual until the modified adjustments of Treble and Bass are stored If you want to store the modified adjustments for all the TV channels Select Features in the Main Menu with the keys a or w and press OK The FEATURES menu appears Select General PP Store with the keys a or w and press OK The message Stored appears briefly on the bottom of the screen You have created and stored a new Personal sound style Select the sound mode Depending on the sound the TV channel transmits and if your set is equipped with Nicam your TV will choose between stereo or digital sound unless you make a sound choice In case of weak stereo or digital sound signals due to the transmission select analogue Digital sound available or mono Select Sound Mode in the menu
37. r lt to select Yesor No re 7 Me se In this way you decide whether you want to keep the selected TV channel as a FRONT 3 oe favourite TV channel or not 4 Aes Repeat this for every TV channel you like to change into a favourite or a non favourite TV channel FAVOUR TE it Press MENU again if you have finished selecting TV channels in the favourite list PROGRAMMES EET or The INSTALLATION menu reappears oooyyo EXT1 Vo Audio Output Ext2 Output CD i Photo CD Information Line 0 yoo Vo Vo Install TV Configuration Different options can be selected depending on the different peripheral equipment you may have connected to your TV Select TV Configuration with the keys a or w and press OK The TV CONFIG menu appears and Audio Output lights up Audio Output If you have audio equipment or another external sound source connected to your TV you can select two types of audio output Select Variable with the keys or lt if you want to adjust the volume of your audio equipment via the TV Select Constant if you want to adjust the volume with the volume control of your audio equipment Ext2 Output See Record with your video recorder p 34 CD i Photo CD See Connect Peripheral Equipment TV and a CD i Photo CD p 30 Information Line Select Information Line with the keys a or w and press OK Press the keys lt or to select On After the selection of a TV channel or after pressin
38. rambler 10 digital 14 digital scan 13 DNR 22 dynamic contrast 13 e easy text 26 eurocable 29 euroconnector 29 extra loudspeakers 31 f favourite programmes 9 features 17 freeze 22 frequency 7 g general PP store 17 give name 8 h headphone 31 hue 12 i incredible sound 15 info on screen 21 information line 10 installation 5 interrupt the sound 11 I language 4 local menu 16 loudness 14 m main menu 12 manual installation 6 menu language 4 message 18 mono 14 mosaic screen 23 p peripheral equipment 29 permanent programme number 21 personal preferences 22 photofinish 23 picture 12 pip size 17 programme list 20 recording 34 recording source 20 remote control 3 reshuffle 8 S channels 6 search for TV channels 6 select TV channels 11 select TV system 6 selection mode 6 sharpness 12 sleeptimer 17 smart controls 12 14 sound 14 sound mode 14 Spatial 15 special teletext functions 28 speech 14 standby 11 stereo 15 store TV channels 5 strobe 23 subpages txt 27 subtitles 28 S VHS 34 switch TV on 11 teletext 26 timers 19 tint 13 treble 14 TV configuration 10 vertical squeeze 21 video recorder 35 volume 11
39. rom our range of products can be operated with the remote control of your TV Press M on the remote control repeatedly until the arrow in the display indicates the equipment you want to operate with this remote control To operate your TV again first press the TV key and enter the programme number of the TV channel you want to watch with the digit keys Reproduce picture and sound from equipment connected only with an aerial cable Switch your TV on Select the programme number under which you have stored the test signal with the digit keys Switch on your equipment See the handbook for your equipment The picture and or sound is reproduced If you want to watch TV channels again Enter the programme number of the TV channel which you want to watch with the digit keys Reproduce picture and sound from equipment connected with a eurocable Switch your TV on Switch on your equipment Either the picture and or the sound is reproduced or descrambled If this is not the case Press gt repeatedly until the designation EXT1 EXT2 EXT3 Or FRONT appears on the screen according to where you connected your equipment at the back or the front of your TV Either the picture and or the sound is reproduced or descrambled If you want to watch TV channels again Enter the programme number of the TV channel which you want to watch with the digit keys Reproduce picture and sound from equipment connected to the front of the
40. s O gt The PICTURE menu appears PROGRAMMES NSTALLATI ON 0 Select with the keys a and w the adjustments of Contrast Brightness Colour Sharpness Tint Digital Scan and Dynamic Contrast you want to change W hen you are watching a TV channel in the NTSC system the option Hue also nee appears and can be adjusted in the PICTURE menu Col our Sharpness o Press the keys lt or to alter the selected adjustment i er gt The PICTURE menu disappears and only the selected menu item remains Dynamic Contrast including its bar on the screen gt The PICTURE menu reappears after a few moments or by pressing OK Now you can select another adjustment with the keys a and vw gt The picture setting in the Smart Controls for PICTURE is set to Manual until the modified adjustments are stored Sharpness The selected setting for Sharpness is stored only for the selected TV channel after the indication disappeared You can adjust the sharpness for each TV channel separately Sl eepti mer Pip size Child Lock General PP store Message Ti mers Recording Source VVovoyvyo 0 If you want to store the modified adjustments for Contrast Brightness Colour Tint and Dynamic Contrast for all TV channels Press MENU The MAIN MENU reappears Select Features with the keys a or w and press OK The FEATURES menu appears Select General PP store with the keys a or w and press OK The messa
41. s displayed Press to interrupt the scan function and to switch off the mosaic screen Never perform a scan while recording a TV programme with a video recorder recording from EXTERNAL 1or 2 since the scan will be recorded on tape Photo Finish The main picture is displayed in successive frozen pictures The last picture on the bottom right will remain live Press OK again A new photo finish picture is displayed overwriting the old one Press to switch off the photo finish function and the mosaic screen Strobe The picture is reproduced image by image So you get an interrupted movement Press OK again The picture is reproduced image by image at a faster speed Press to switch off the strobe function and to switch off the mosaic screen Pip Picture in Picture For TV sets with the Picture in Picture option W ith pip Picture in Picture you can call up a little screen within the main screen Thus at the same time you can watch a programme from other equipment connected with a eurocable The picture in the small screen has no sound oyyoo 000009 Switch pip on and off O pen the door of the remote control Press 3 The pip screen appears and the picture is the same as in the main screen The name of the pip programme appears briefly on the main screen Press 3 again to switch pip off Select pip connections Press CA repeatedly The name of the connections appears If any o
42. ther peripheral is connected and switched on its programme appears in the pip screen Select on your video recorder the TV channels which you have stored in it For connecting equipment to EXTERNAL 1 EXTERNAL 2 EXTERNAL 3 or FRONT see Connect Peripheral Equipment p 29 0 0 0 ooyoyoy yo Switch screens Press A The main screen and the pip screen exchange places If the TV channel is only in the pip screen and not in the main screen then use P of the pip keys in order to change your TV channel in the pip screen Select Still Picture Press 4 The picture in the pip screen stands still Even when pip is not switched on the main screen will appear as a still picture in the pip screen In this way you make a snapshot of the main screen picture Press amp again or select another channel in the pip screen in order to cancel the still picture Press C to switch pip off Move the pip screen Press Each time you press this key the pip screen moves to another corner of the main screen Select Pip size Press MENU The MAIN MENU appears Select FEATURES with the keys w or a and press OK The FEATURES menu appears Select Pip Size with the keys w and a Pip Size lights up Press the keys lt or to select a Large or a Small pip format Keep MENU pressed for a short while to switch off each menu Teletext Most TV channels broadcast information via teletext Eac
43. tion leave a space of at least 5 cm free all around the set To prevent any fault and unsafe situations please do not place any objects on top of the set Insert the aerial plug tightly into the aerial socket rm at the back of the TV with an aerial cable of good quality 2 CABLE rm 6 o Check if the loudspeaker switch at the back of the TV is in the sq position Insert the mains plug in the wall socket with a mains voltage of 220V 240V Remote control Remove the cover of the battery compartment on the back of the remote control Insert the 2 batteries supplied T ype RO3G 1 5V Click the cover back into place The Philips batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many countries exhausted batteries may not be disposed of with your household waste Please inform yourself on how to dispose of exhausted batteries according to local regulations 0 Press the TV key next to the display gt In the display of the remote control the letters TV appear in a black block for a few seconds You can now operate your TV with the remote control Should your remote control be lost or broken you can still select TV channels adjust the volume and modify some basic picture and sound adjustments with the keys PROGRAM VOLUME and LOCAL MENU behind the front door of your TV See page 16 gt The TV is switched on The screen lights up after a few moments MAI N
44. udy selected teletext page 0 Press the pap key Vv Select subpages W hen a selected teletext page consists of different subpages one of the subpages appears on the screen The coloured number in the first information line refers to the displayed subpage The previously selected teletext page is displayed The other subpages can be selected in 2 ways W ith the keys or p The other subpage numbers appear in white as soon as the transmission has found them and they are stored in the memory so that they are available while the teletext page is on screen o Select with the keys lt or p the previous or the following subpage or gt 0 o By adding a subcode O pen the door of the remote control Press EQ Enter the desired subpage with the digit keys e g 3 for the third page of seven subpages The TV searches for the selected subpage Press E9 again in order to cancel the subcode Press E9 again The information line with the available subpages appears Select the index teletext page o Open the door of the remote control o Press the white colour key G gt The main index usually p 100 appears or gt 0 Press MENU A T O P overview of the teletext subjects available appears N ot all TV channels broadcast the T O P teletext W hen the teletext system is not T O P teletext a message appears at the top of the screen Select with the keys lt gt
45. uld switch itself off to standby Hold the key pressed down The counter runs from Offup to 180 min Hold the lt key pressed down The counter runs from 180 min down to Off If you have set a time then one minute before the TV switches off the remaining minute automatically appears on the screen together with the message Good Night Y ou can always switch off your set earlier or change the set time Pip Size O nly for sets with the Picture in Picture option Press the keys lt or to select a Large or a Small pip format For more information about PiP see PiP Picture in Picture p 24 Child Lock If the child lock is on the TV can only be switched on with the remote control The keys P and behind the door on the TV cannot be used In this way you can prevent unauthorised use of your TV If the message Child Lock ON appears the child lock must be switched off before you can use the keys P and on the TV Press the keys lt or to select Onor Off General PP Store Select General PP Store with the keys w or a Press OK General PP Store lights up and the message Stored appears briefly on the bottom of the screen The adjustments of contrast brightness colour and dynamic contrast made in the picture menu and the adjustments of volume balance treble and bass made in the sound menu are stored in memory for all the stored TV channels Change Clear Type Run oooyo Oo o 0 oyo o
46. xtra loudspeakers To achieve a better sound effect you can connect 2 or 4 extra loudspeakers B mT min 8 O hm See also Spatial and Surround Sound p 15 o Connect the loudspeakers to the connector clips at the back of the TV o Push the connector clip down and insert the ends of the wires into the openings the negative wires usually the darkest ones to the black connector clips the positive wires to the red connector clips O n the back of the TV it is indicated where you connect the FRONT and REAR loudspeakers Do not insert the wires too far In case of 2 extra loudspeakers o Connect them tO FRONT aeeccsssccstsecssssecesersneeeen OF gt Connect them to REAR o Connect the front left loudspeaker to o Connect the rear left loudspeaker to FRONT L the front right loudspeaker to REAR L the rear right loudspeaker to FRONT R REAR R o Put the loudspeaker switch on the back of gt You achieve a surround sound effect the TV in the R amp K position A loudspeaker kit to achieve Surround gt The internal loudspeakers of your TV are Sound containing two extra boxes only to now switched off be connected to REAR and 12 m wire can gt You achieve a better front sound effect be purchased from your dealer Do never connect the loudspeakers from this kit to FRONT In case of 4 extra loudspeakers o Connect them to REAR and FRONT o Press the loudspeaker switch on the back of the TV in the mK position gt The intern
Download Pdf Manuals
Related Search