Philips 22PFL3404D/12 Flat Panel Television User Manual
Contents
1. 4 3 Shows the classic 4 3 format Subtitle zoom Displays 4 3 pictures over the full area of the screen with sub titles visible Part of the top of the picture is clipped off Movie exp 14 9 Not for HD and PC mode Scales 4 3 format to 14 9 DE E Movie exp 16 9 Not for HD and PC mode Scales 4 3 format to 16 9 Wide screen Stretches the classic 4 3 format to 16 9 Unscaled For HD and PC mode only and in selected models only Allows maximum sharpness Some distortion may be present due to the broadcaster s systems Set your PC resolution to wide screen mode for best results Use smart sound Use smart sound to apply pre defined sound settings 1 Press xS L gt The Smart sound menu appears 2 Press to select one of the following smart sound settings e Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Personal Applies the settings that were customised in the sound menu J Press 81 to confirm your choice L gt The selected smart sound setting is applied Adjust sound settings 1 Press 3 2 Press AY to select Sound L gt The Sound menu appears J Press AVP to select and adjust e Smart sound Accesses pre defined smart sound settings e Bass Adjusts the bass level e2. English O d Standby On e Switches the TV to standby if it is on e Switches on the TV if it is in standby EX Toggles the main menu on or off 8 Not used Toggles teletext on or off f amp 8s Selects connected devices BEER STI EH Sets a delay after which the TV switches to standby amp 2 Accesses options relating to the current activity or selection iA Confirms an entry or selection and displays the channel grid when watching TV A Navigation buttons Navigates through the menus 1 FT Displays programme information if available 3 Mutes or restores audio output 08 Switches to the next or previous channel When the TV menu is on this functions as Page Up Down 0 9 Numeric buttons Selects a channel or setting O RERB Launches the picture menu REFS Launches the sound menu EN v Increases or decreases volume 4 RE sie UHR e Returns to a previous screen e Returns to the previously viewed channel m 39 Switches between channel grid and programme list Miz Switches Stereo and Nicam Stereo to Mono Selects first language Dual 1 or second language Dual II in bilingual programmes Toggles the demonstration menu on or off f amp xX Selects a picture format BRA Enables Incredible Surround for stereo sources Enables spat
3. Noise reduction Filters and reduces noise in an image e Colour temperature Adjusts colour temperature e Dig CrystalClear Digitally adjusts picture quality to optimal contrast colour and sharpness e Dynamic contrast Automatically enhances contrast in an image A Medium setting is recommended e Dynamic backlight Adjusts the brightness of the TV backlight to match lighting conditions e MPEG artifact re Smoothes out transitions on digital pictures You can switch this feature on or off e Colour enhancement Makes colours more vivid and improves the resolution of details in bright colours You can switch this feature on or off e PC mode Adjusts the picture when a PC is connected to the TV via HDMI or DVI e Picture format Changes the picture format e Horizontal shift Adjusts the picture horizontally for PC VGA or CVI input e Vertical shift Adjusts the picture vertically for PC VGA or CVI input Change picture format 1 Press 9 5 L A picture format bar appears 2 Press AY to selecta picture format L gt The selected picture format is activated Press 1 to confirm your choice sp i Summary of picture formats The following picture settings can be configured Note Depending on the format of the picture source some picture settings are not available Super zoom Not for HD and PC mode Removes the black bars on the side of 4 3 broadcasts There is minimal distortion
4. Treble Adjusts the treble level e Volume Adjusts the volume e Balance Adjusts the balance of the right and left speakers to best suit your listening position e Dual l Il Selects between audio languages if dual sound is broadcast e Mono Stereo Selects between mono or stereo if stereo is broadcast e Surround Enables spatial sound e Auto volume Automatically reduces sudden volume changes for example when switching channels When enabled this produces a more consistent audio volume e Delta volume Levels out volume differences between channels or connected devices Switch to the connected device before you change the delta volume Create and use lists of favourite channels You can create lists of your preferred TV channels and radio stations so that you can find those channels easily Tip You can create and store up to four favourite lists on your T V Select a favourite list 1 when watching T V press 1 to display the channel grid 2 Press iT Ly The channel options menu appears J Press Wik to select Show favourite ch L gt The favourite lists appear Press AY to select a favourite list Press 1 L gt Only channels in the favourite list appear in the channel grid Un A View all channels You can exit a favourite list and view all installed channels 1 when watching T V press 1 to display the channel grid 2 Press il L gt The channel opt
5. antenna connection e Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is a picture but sound quality is poor Note f no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but s
6. or view the channel grid 5 Press 32 to exit Note You can restore a skipped channel to your channel listing see Step 2 Search and store new TV channels on page 16 Rename channels Channels can be renamed so that a name of your choice appears whenever the channel is selected 1 When watching T V press iA to display the channel grid 2 Select the channel you want to rename Pese GAN The channel options menu appears 4 Press to select and enter Rename chan L gt A text input box appears Press AY4b to select characters 5 6 Press 1 to confirm each of the characters Tip Rename channels the length of the name is limited to six characters Use Aa to change upper case letter to lower case letter and vice versa Rearrange channels After you install channels you can rearrange the order in which they appear 1 when watching T V press to display the channel grid 2 Press 242 L gt The channel options menu appears Press to select and enter Reorder Select the channel you want to reorder Press 1 to start reordering Press to select the new position for the channel Press 14 to confirm the new position Press 40 Done reordering appears Press HM to finish reordering 0 Press gt RE SUB WHR to exit 0 CON AUA W EN 17 English 7 Connect devices This section describes how to
7. software Installation J Select Start and press 983A to re install channels Start automatic installation This takes a few minutes L gt As the system searches for channels you have the option to Stop the process 4 i you want to stop searching select Stop and press 1 L gt A dialogue box appears asking you if you really want to Stop or Continue with the process D Press lt P to select Stop or Continue 6 Press iA to confirm your choice 7 When done press 3 amp amp to exit Manually install channels This section describes how to search and store analogue I V channels manually 1 Press R 2 Select Installation gt Channel install gt Analogue Manual he Analogue Manual menu appears EN 15 English Channel assistant Analog Manual Preferences q Sound Menu language Factory settings Current software Features Installation v wo Press AY to select the item you want to adjust e Colour system e Sound system e Search e Fine tune e Store cur chan Store new channel e Skip channel Step 1 Select your system Note Skip this step if your system settings are correct Press 3 NA Select Installation gt Channel install 7 Analogue Manual he Analogue Manual menu appears Press AY 4b to select and enter Colour system Press 14 to confirm Press AY 4b to select and enter
8. the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature e Enter 8888 The TV menu is in the wrong language e Change the TV menu to your preferred language When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance 22 EN TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the T V source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an
9. 80 x 768 60Hz e 1280 X 1024 60Hz e 1360 x 768 60Hz Video formats e Resolution refresh rate e 480 60Hz e 480p 60Hz e 5 6i 50Hz e 5 6p 50Hz e 720p 50Hz 60Hz e 10801 50Hz 60Hz e 1080p 24Hz 25Hz 30Hz 50Hz 60Hz Note Some formats may not be supported due to compatibility issues between devices Tuner Reception Transmission e Antenna input 75ohm coaxial IEC75 e TV system PAL B G PAL D K PAL e Video playback NTSC SECAM PAL Remote control e PFO1CO9B e Batteries 2 x AAA LRO3 type Power e Mains power 220 240V 50 60Hz Standby power lt 0 3 W e Ambient temperature 5 to 40 degrees Celsius Supported TV mounts To mount the TV purchase a Philips TV mount or a VESA compatible TV mount To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5 cm from the back of the TV VN Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage TV screen Required Required size inches pitch mm mounting bolts 19 100x100 4xM4 22 100x100 4xM4 26 100x200 EN 21 English 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from
10. Register your product and get support at www philips com welcome EN User manual ZH CN AP Fit 22PFL3409 93 PHILIPS Contents 1 Notice 2 2 Important 3 3 Your product 5 Product overview 5 4 Use your product 7 Switch your TV on off or to standby 7 Switch channels 7 Watch connected devices 8 Adjust TV volume 8 5 Use more of your product 9 Access V menus 9 Change picture and sound settings 9 Create and use lists of favourite channels 11 Use timers 12 Use TV lock 13 Use the TV clock 14 Change TV preferences 14 Start demo T4 Reset the TV to factory settings 14 6 Install channels 15 Automatically install channels 15 Manually install channels 15 Rename channels 17 Rearrange channels a7 7 Connect devices 18 Back connector 18 Side Connector 18 Connect a computer 18 Use Philips EasyLink 19 Use a Kensington lock 20 8 Product information 21 Supported display resolutions 21 Tuner Reception Transmission Remote control Power Supported TV mounts Troubleshooting General TV issues TV channel issues Picture issues Sound issues HDMI connection issues Computer connection issues Contact us 10 Index EN 21 21 21 21 24 22 22 22 23 23 23 23 24 English 1 Notice 2009 Koninklijke Philips Electronics rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective ow
11. Sound system Press 4 to confirm No Uu W Press to exit Step 2 Search and store new TV channels 1 Press R 16 EN 2 Select Installation gt Channel install gt Analogue Manual The Analogue Manual menu appears Press AY 4b to select and enter Search Press AY or use Numeric buttons to manually enter the three digit frequency Press 814 to begin search Press 4 when the new channel is found Noo AW Press to select Store new channel to store the new channel under a new channel number Press lt P to select Yes and press 1 to store new channel 9 Press to exit Fine tune analogue channels 1 Press 3 amp 8 2 Select Installation gt Channel install 7 Analogue Manual The Analogue Manual menu appears Press to select and enter Fine tune Press AY to adjust frequency Press 1 when done Press AY 4b to select and enter Store cur chan to store the channel number Press lt P to select Yes and press 1 to store current channel CON OUR Press to exit Skip channels 1 Press 324 2 Select Installation gt Channel install gt Analogue Manual The Analogue Manual menu appears J Press to select and enter Skip channel 4 Press lt P to select Yes and press H to skip current channel L gt The selected channel is skipped when you press 9 on your remote control
12. connect various devices with different connectors and supplements examples provided in the Quick Start Note Different types of connectors may be used to connect a device to your TV depending on availability and your needs Back connector jets lesece nm 1 SERV C For software update 2 PC IN VGA and AUDIO IN Audio and video input from a computer 3 TV ANTENNA Signal input from an antenna cable or satellite 4 AV IN Analogue audio and video input from analogue or digital devices such as DVD players satellite receivers and VCRs 5 AV OUT Audio and video output to analogue devices such as another T V or a recording device 6 CVI 1 CVI 2 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 7 HDMI 1 Digital audio and video input from high definition digital devices such as Blu ray players Side Connector 2 009 VIDEO 1 AUDIO L R Audio input from analogue devices connected to VIDEO VIDEO Composite video input from analogue devices such as VCRs Connect a computer Before you connect a computer to the TV e Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer Connect a computer with one of the following connectors Note Connections via DVI or VGA require an additional audi
13. e TV controls Set or change the TV lock code Press X Press AY 4b to select Features gt Set code Press gt to enter the code setup Enter your code with the Numeric buttons AW N Re enter the same code in the new dialogue box for confirmation L gt Ifthe code is set successfully the dialogue box will disappear However if the code cannot be set you will be prompted to re enter the code 6 f you want to change the code select Features gt Change code 7 Enter your current code using the Numeric buttons L gt If the code is validated you will be prompted to enter your new code 8 Enter the new code using the Numeric buttons L gt You will be prompted to re enter the new code for confirmation Tip f you forget your code enter 8888 to override any existing codes Lock or unlock the TV Locking the TV prevents your child from accessing all channels and connected devices 1 Press 2 Press AVP to select Features gt TV lock J Press to enter TV lock L gt A screen prompting you to enter code appears Enter your code Press AY to select Lock or Unlock Press HM L gt All channels and connected devices are locked or unlocked ON amp 7 Press 3224 to exit Note Restart the TV for the change to take effect Lock or unlock one or more channels 1 When watching T V press to display the channel grid 2 Pres
14. ecommended or authorised in this manual shall void the warranty Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Copyright All other registered and unregistered trademarks are the property of their respective owners Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Portions of this software are copyright The Fr
15. ee Type Project www freetype org Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire e Never expose the T V to rain or water Never place liquid containers such as vases near the T V If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the T V remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the T V e Two people are required to lift and carry a TV that weighs more than 25 kg e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined wei
16. er cord from the power outlet ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable e Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time e Ifthe TV is transported in temperatures below 5 C unpack the TV and wait until the T V temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and colour fading wipe off water drops as soon as possible Recycling we Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheeled b
17. g for optimal picture quality continuously under any signal conditions Press Wid to start the demo Press 3 amp amp to exit Un A Reset the TV to factory settings You can restore the default picture and sound settings of your TV Channel installation settings remain the same 1 Press 2 Select Installation gt Factory settings J Press to enter the Factory settings menu Reset is highlighted 4 Press Wii to reset to factory settings 5 Press 32 to exit 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to reinstall and fine tune channels Automatically install channels This section describes how to search and store channels automatically Step 1 Select your menu language Note Skip this step if your language settings are correct 1 Press 2 Select Installation gt Menu language J Press to enter Menu language 4 Press AY to select a language setting English Channel install Preferences Factory settings Current software Press 1 to confirm Os Ul Press to exit Step 2 Install Channels 1 Press 324 2 Select Installation gt Channel install gt Channel assistant Channel assistant Analog Manual Menu language Preferences Factory settings Current
18. g them Use the source button fet auus mx ESR 8X9 WE ERNS 1 Press SS L gt The source list appears 2 Press A or V to select the connected device 3 Press 1 to confirm selection Adjust TV volume 1 1 a VOLUME 1 1 1 wae SOURCE To increase or decrease volume e Press amp amp e Press VOLUME the side of the TV To mute or unmute sound e Press 8 to mute audio e Press 8 amp amp again to restore audio 5 Use more of your product Access TV menus Menus help you to install channels change picture and sound settings and access other features 1 Press L gt The menu screen appears Smart picture Contrast Brightness Colour Hue Sharpness Noise reduction Installation Colour temperature 2 Press the to select and navigate through one of the following menus e Picture Adjusts the picture setting for optimal viewing e Sound Adjusts the sound setting e Features Accesses different features like timer TV lock and demo e Installation Selects channel installation menu adjusts preferences and resets the TV to factory settings J Press 81 to confirm your choice Ea e When the menu is on 8 functions as Page Up Down Press 3 at any time to exit the menu Press D 3 amp 1 SGB WIR to m
19. ght of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating Never install the TV in a confined space Always leave a space of at least 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the T V Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches EN 3 English the value printed on the back of the T V Never connect the TV to the power outlet if the voltage is different e Risk of injury fire or power cord damage Never place the TV or any objects on the power cord e To easily disconnect the TV pow
20. ial mode for mono sources 4 Use your product This section helps you perform basic operations see Use more of your product on page 9 Switch your TV on off or to standby To switch on e standby indicator is off press POWER at the side of the TV e standby indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L gt The standby indicator switches to red To switch off e Press OPOWER at the side of the TV L gt The standby indicator switches off Ea Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet Note f you cannot locate your remote control and want to switch on the TV from standby press Jii or SOURCE at the side of the TV Switch channels e Press 338 on the remote control P CH on the side of the TV e Press M to use the channel grid e Enter a channel number using the Numeric buttons Note When you use a favourite list you can only select those channels in the list see Select a favourite list on page 11 EN 7 English Watch connected devices Note For easy access add new devices to the home menu before selectin
21. ilips Electronics N V All rights reserved Document order number Q41G2202813 4A joe x
22. in symbol attached to a product it means the product is covered by the European Directive 2002 96 EC Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences for the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on the separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences for the environment and human health 3 You r product Remote control Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Product overview This section gives you an overview of commonly used controls and functions Side controls and indicators iR SUBIR 1 POWER Switches the product on or off The product is not powered off completely unless it is physically unplugged P CH Switches to the next or previous channel PHILIPS TELEVISION SOURCE Selects connected devices VOLUME Increases decreases volume EN
23. ions menu appears J select Show favourite ch gt AII EN 11 English 4 Press Wi L gt All channels display in the channel grid Note All favourite channels are marked by an asterisk in the channel grid Add a channel to a favourite list Tip View all channels before adding a channel to a favourite list 1 when watching TV switch to the channel you want to add to a favourite list see Switch channels on page 7 Press 3438 L gt The channel options menu appears N Press AY to select Mark as favourite Press 1 L gt The favourite lists appear AW Press AY to select a favourite list to add the channel to 6 Press HM L gt The channel is added to the favourite list Remove a channel from a favourite list Note Select the favourite list to edit before removing a channel When watching TV press to display the channel grid 2 Press iM L gt The channel options menu appears Press 1 to enter Show favourite ch 12 EN Press AY to select a favourite list and press 1 to enter the list Press to choose the channel that you wish to remove from the list Press 22 Press AY to select Unmark as fav Press MA ty The channel is removed from the favourite list COND Ww A Use timers You can set timers to switch the TV on or switch to standby at a specified time Automatica
24. lly switch the TV to standby sleeptimer Sleeptimer switches the TV to standby after a pre defined period of time Tip You can always switch off your TV earlier or reset the sleeptimer during the countdown Press 3 amp 8 1 2 Select Features gt Sleeptimer L gt The Sleeptimer menu appears UJ Press lt P to set the sleep time L gt The sleep timer can be up to 180 minutes in steps of five minutes If set to zero minutes the sleep timer is switched off 4 Press Wi to activate the sleeptimer L gt The TV switches to standby after the pre defined period of time Automatically switch the TV on on timer You can switch the TV to a specified channel at a specified time from standby Press Select Features gt On timer Press gt to enter the On timer menu Press to select Activate and set a frequency Once Daily or Off Press 1 to confirm Press to select Time and set the starting time Press Done to confirm CON QU BRWN Press AY 4b to select Programme and set the channel 9 Press 1 to confirm 1 0 Press 3 amp amp to exit El Select Off to switch off On timer When On timer is switched off only Activate option is available Set the TV clock before you activate On timer feature Use TV lock You can prevent your children from watching certain programs or certain channels by locking th
25. logue channel fine tune B Batteries Bracket C Channel list favourite troubleshooting update Channels favourite list install automatic manual rearrange rename tune Computer format technical specifications Connections HDMI troubleshooting mains cord technical specifications troubleshooting D Demo Devices watch Display resolution E EasyLink disable 24 EN 16 21 11 22 12 11 15 15 17 17 16 21 23 18 21 23 14 21 19 enable one touch play one touch standby Environmental care F Factory settings Favourite list select set up H HDMI cable troubleshooting Home mode Installation automatic manual L Location M Menu main menu O One touch play One touch standby P Picture format picture format change troubleshooting Picture settings R Reception Remote control technical specifications 19 20 14 11 11 23 14 15 15 14 19 20 10 22 22 16 21 S Smart settings Sound settings T Technical specifications Timer on timer Troubleshooting Tune channels TV adjust volume menu standby switch channels switch off switch on troubleshooting tuner technical specifications wall mount TV lock lock channels lock connected devices V Video format video format technical specifications Volume adjust 2 71 11 21 EN 25 English PHILIPS Q41G2202813 4A 2009 Koninklijke Ph
26. ners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Philips cannot be held responsible either for any errors in the content of this document or for any problems as a result of the content in this document Errors reported to Philips will be corrected and published on the Philips support website as soon as possible Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not r
27. o cable HDMI cable e cable Use Philips EasyLink Your TV supports Philips EasyLink which enables one touch play and one touch standby between EasyLink compliant devices Note Compliant devices must be connected to your TV via HDMI Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it 1 Press MENU 2 Select Installation gt Preferences gt EasyLink J Select On or Off Use one touch play 1 After enabling EasyLink press play on your device L gt The TV automatically switches to the correct source EN 19 English Use one touch standby 1 Press and hold OStandby on the TV s or device s remote control for at least three seconds L gt The TV and all connected HDMI devices switch to standby Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington ock between the slot and a permanent object such as a heavy table 20 EN 8 Product information Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats for connections using HDMI and VGA e Resolution refresh rate e 640 x 480 60Hz e 800 600 60Hz e 1024 x 768 60Hz e 1280 x 720 60 Hz e 12
28. ound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP support can delay the time taken for a TV to display content from a HDMI device e Ifthe TV does not recognize the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e Ifa HDMI to DVI adaptor or HDMI to DVI cable is used check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only Computer connection issues The computer display on the TV is not stable e Check that a supported resolution and refresh rate is selected on the computer e Set the TV picture format to unscaled Contact us If you cannot resolve your problem refer to the FAQs for this product at www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in the Addendum Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Note Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 23 English 10 Index A Ana
29. ove back one screen Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Use smart picture Use smart picture to apply pre defined picture settings 1 Peso REAR L gt The Smart picture menu appears 2 Press to select one of the following smart picture settings e Personal Lists customised personal picture settings e Vivid Maximises picture settings e Standard Adjusts picture settings to suit most environments and types of video e MOVIE Applies picture settings ideally suited for movie viewing e Game pplies picture settings maximised for fast moving games e Energy saving Applies low energy picture settings J Press WU to confirm your choice L gt The selected smart picture setting is applied Manually adjust picture settings 1 Press R 2 Press Wii to select Picture The Picture menu appears J Press AYP to select one of the following picture settings e Smart picture Accesses pre defined smart picture settings e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Brightness Adjusts the intensity and details of dark areas EN 9 English e Colour Adjusts colour saturation e Hue Compensates colour variations in NTSC encoded transmissions e Sharpness Adjusts the level of sharpness in image details e
30. s AY4b to select a channel to lock or unlock EN 13 English Press 39 Press AY to select Lock channel or Unlock channel AW For each selection press 1 to lock or unlock the channel Note Restart the TV for the change to take effect Use the TV clock You can display a clock on the TV screen Set the TV clock 1 Press 2 Select Features gt Clock L gt The Clock menu appears 3 Press AY 4b or Numeric buttons to enter time 4 Press Done to confirm 5 Press 3 amp amp to exit Note The clock is disabled automatically after three seconds Change TV preferences Press Select Installation gt Preferences U Press gt to enter Preferences e Location Optimises TV settings for your location home or shop e Volume bar Displays the volume bar when adjusting the volume e EasyLink Enables one touch play and one touch standby between EasyLink compliant devices e E sticker For shop mode only Sets the location of the e sticker Press to select your preference Press HMA Press 3 amp 38 to exit ON amp Start a TV demo 1 Press 3224 2 Select Features gt Demo The Demo menu appears 3 Press the AY to select a demo e Dig CrystalClear Digitally adjusts picture quality to optimal contrast colour and sharpness e Active Control Automatically adjusts the picture settin
Download Pdf Manuals
Related Search