Humax CR-3510 Satellite TV System User Manual
Contents
1. HUMAX Guide of Main Menu 23 HUMAX Organize Favorite Services Delete Move Lock Skip or Rename each TV service in a favorite TV group and re group them into your favorite TV group This mode has the same operating methods as Organize All Services Moving the favorite group from the service group 1 Press the gt button to move to Services Plate right window 2 Use the a v buttons to select a service channel you want to move 3 Press the button and the selected service channel will be moved to Favorites Plate left window 4 To finish this menu e Press the lt button to move to Favorites Plate left window Press the button and the message Saving changed Service Information will appear on the center of screen Press the button and the message Do you want to save will appear on the center of screen At this time press the button note 3 1 lt gt buttons Use to move services and favorite window 2 buttons Use to move to the previous page and the next page Organize Radio Services Same functions as Organize TV Services Organize Networks You can edit services using the network unit The network names are displayed on the left side of screen and the TV Radio Services included in the highlighted network are displayed on the right side of screen Only the Delete Rename Function can be used in this mode 3 32. an antenna discharge unit size of grounding ANTENNA LEAD N WIRE Pe cies ieee DISCFA iGE UNIT ELECTRIC VEC SECTION 3810 20 GROUNDING GUNUUL 1 URS NEC SECTION 810 21 GRUJND CLAMPS conductors location of antenna discharge unit See connection to grounding electrodes and POWER SEHVIGE GHOUNDING requirements for the grounding electrode NEG AIONAL LEG IHKIUAL VUE MEG AHI 250 2A 41 A 3 HUMAX e Do not attempt to service the product yourself Refer all servicing to qualified service personnel Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions when the power supply cord or plug is damaged if liquid has been spilled on the unit or if objects have fallen into the unit if the product has been exposed to rain or water if the product does not operate normally by following the operating instructions if the product has been dropped or the cabinet has been damaged when the product exhibits a distinct change in performance e If you make adjustments yourself adjust only those controls that are covered by the operating instructions Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal e When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the orig
3. This consists of three blocks by 30 minutes per block O N NIIA ASSES A d Prd Bae tN TE see 18 HUMAX ps HUMAX Guide of Main Menu 2 Parental Control You can set a parental guidance rating to each program in this mode 1 When the C9 button is pressed after selecting the highlighted parental control on the initial menu screen a display window for entering the PIN Code will appear on the center of screen The default PIN Code is 00090 2 Enter the PIN Code on the display window If any problem occurs when entering a PIN Code you cannot switch to the next mode 3 Set the parental guidance rating of highlighted censorship classification Classification no block or total block Enter the PIN Code to unlock or lock programs 4 To change your PIN Code Select the highlighted Old Pin Code using the 4 buttons and then enter your Old PIN Code Enter a New PIN Code in the highlighted new PIN Code using the 4 buttons To verify the New PIN Code re enter a new PIN Code in the highlighted Verify Changed PIN Code 5 When the entered PIN Code is correct then all settings are completed If the PIN Code is wrong the message PIN Code mismatch will be displayed on the display window When the button is pressed at this time the old PIN Code is valid and the cursor is located in the first position of this menu 3 Installation This mode allows you to customize add a new
4. Audio Output Set the Audio mode which is output from RCA Cinch Jack Stereo Mono Screen Mode Select the aspect ratio of TV which is connected to STB 4 3 or 16 9 Display Format Select the format which the video is to be displayed on screen When your TV set is 4 3 and video source is 16 9 STB will display in Letter box or Center mode as selected When your TV setis 16 9 and video source is 4 3 STB will display in the Pillar box or Full mode as selected NTSC Mode Adjust this value between 3 58 and 4 43 if your TV displays the video only in black and white color Normally NTSC 3 58 mode is used worldwide but some TV sets can support only NTSC 4 43 mode VHF Tuning When you watch TV after connecting a cable between the RF OUT jack on STB and the Input jack RF Input on TV If you select Channel 3 or Channel 4 and then set VHF Tuning to Channel 3 or Channel 4 all services from STB will be viewed through TV Channel 3 or Channel 4 Other Setting Select the OSD transparency and Information Box Display Time OSD Transparency Select the OSD transparent type It affects Information Box Service List Time and Quick mode of TV Guide Use the lt gt buttons to toggle transparent and opaque Info Box Display Time Set the display duration of Information Box displayed on the screen after changing services The time ranges from 0 to 20 seconds Ter Fe fee 23 HUMAX Guide of Main Menu 3 2 Ser
5. INPUT RF INPUT jack on the TV 3 Connect a set of audio video cables between the AUDIO VIDEO OUT jacks on the STB and the AUDIO VIDEO INPUT jacks on the TV Viewing the STB programs 4 Turn on your STB and TV 5 Switch to the Video mode using the TV remote control 6 Operate the STB to watch a program you want An S Video Cable produces better picture quality than a Video Cable Viewing the Free to Air or CABLE programs 7 Switch to the STB Standby mode 8 Switch to the TV Air mode using the TV remote control and then select a TV channel you want to watch Using a HI FI SYSTEM for sound 9 Connect a set of audio cables between the AUDIO OUT jacks on the STB and the AUDIO LINE AUX INPUT jacks on the HI FI SYSTEM 9 HUMAX Connecting the Set Top Box to Your TV and VCR You can view a STB program and record it using a VCR at the same time rrom Cable Antenna 3ource Year Panel VCR Rear Panel ae 1 Connect a parabola antenna cable to the LNB IN jack Connect an AIR or Cable Box Antenna out terminal cable to the RF IN jack 2 Connect between the RF OUT jack on the STB and the ANT INPUT RF INPUT jack on the TV 3 Connect a set of audio video cables between the AUDIO VIDEO OUT jacks on the STB and the AUDIO VIDEO INPUT jacks on the VCR Recording a program from STB e Turn on the VCR to record a program from the STB e When you record a STB program of a specif
6. OUT an S VIDEO signal from oe ee a STB to RF ANT input jack on your TV your STB to an S VIDEO input jack ona l 1 10 os VCR or TV RF IN Use to connect a general AIR ANT and CABLE jacks to a RF in jack on the STB 7 HUMAX Connecting the Set Top Box to Your TV using a RF CABLE From Cable Antenna Source K OF ELECTRIC SHO DO NOT OPEN UNBOUT RS 232C 60060 IV Rear Panel 1 Connect a parabola antenna cable to the LNB IN jack Connect an AIR or Cable Box Antenna out terminal to the RF IN jack 2 Connect between the RF OUT jack on the STB and the ANT INPUT RF INPUT jack on the TV Viewing the STB programs 3 Turn on your STB and TV 4 Tune the STB to VHF Channel 3 or Channel 4 5 Tune the TV to Channel 3 or Channel 4 Same as you tune the STB 6 Operate the STB to select a program you want to watch Viewing the Free To Air or CABLE programs 7 Switch to the STB Standby Mode 8 Select a channel you want to watch using the TV remote control 8 HUMAX Connecting the Set Top Box Connecting the Set Top Box to Your TV using a RCA CABLE CAUTION ISK OF ELECTRIC SHO 3 0 oC BHO od Pro e j UL BS N 3 4 os Be TV Rear Panel 1 Connect a parabola antenna cable to the LNB IN jack Connect an AIR or Cable Box Antenna out terminal to the RF IN jack 2 Connect between the RF OUT jack on the STB and the ANT
7. the volume press the Mute lt button To cancel Mute press the Mute cG button again or press the 13 W G buttons or lt gt buttons HUMAX Changing Services To change services do in the following sequence 1 Press the Number buttons 0 9 on the remote control 2 Press the gt buttons or 4 buttons Or press the Recall Service List 00 EPG 69 button To switch between TV and Radio services press the TV Radio button To select the previous viewed service press the Recall 80 button Soundtrack When you want to watch the Audio Language of soundtrack under servicing press the Soundtrack button firstly The on screen menu is displayed on the top to left side of the screen To change the audio language 1 lt gt buttons Use to select the Audio on the left right or both 2 buttons Use to select the audio language you want 3 D button When this button is pressed the menu screen will disappear keeping the selected audio soundtrack constant When the current service is switched the audio language returns to the audio language that was selected in previoius service If the returned audio language is invalid the audio language that you selected from the audio language menu has the priority of playback Teletext Use your TV remote control unit to control the Teletext service The teletext button doesn t exist on the STB remote control unit When the service supports Tele
8. want The selected service will appear on the right display window e Use the 4 buttons to select a program you want And then press the button on the remote control unit The selected service will appear on the right display window The selected OSD will be highlighted every time the cursor moves To reserve a program you want Select a program you want by using the gt buttons or A V buttons And then press the White button Press the lt gt buttons to watch the program of previous page or the program of next page Press the Yellow D button to watch the reserved program list RN EE OS OO a HUMAX Weekly mode Shows the information of programs that will be played for a week Select a day you want using the lt gt buttons To watch and reserve a program you want do the same steps with the NOW NEXT mode Reserved mode Shows the program lists that you have already reserved on the TV Guide or Information Box Maximum twenty programs can be reserved This program list includes service name date duration time reservation mode and event name To cancel the Reserved service select a program you want to cancel using the a v buttons and then press the White C button Shows a simple TV Guide like an Information box This mode shows in the A V playback mode e Blue vertical line Indicates the current time e Black white bar Shows the proceeding state of program e Time range of bar
9. Digital Set Top Box for HUMAX Contents Important Safeguards ccceeeececeeseeeeeeeees 1 4 Support amp Copyright cccceccesssssseeeeeeeeees 5 Reference 10 6 Connecting the Set Top 60 7 10 Remote Control Unit cceeeeccceeeeeeeeeeees 11 12 Guide Of FUNCTIONS ccccceeeeeeeeeeeeeeeeeees 13 15 Guide of Main Menu ccccccsseeeeeeeeeeeeees 16 30 Troubleshooting Guide cc cccccceeeeeeeeeees 31 32 Menu Map ccccccccsssceccesseeccesseecseeseeeseaeees 33 34 Specification ccccccceesesseeeeeeeeeeeesaaeeeeeeeess 35 36 00000 Important Safeguards This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference that may cause undesired operation This television receiver provides display of television closed captioning in accordance with 15 119 of the FCC rules CAUTION DO NOT OPEN This symbol indicates dangerous This symbol indicates AN voltage inside the product that N important instructions presents a risk of electric shock accompanying the or personal injury product CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANC
10. E TO RAIN OR MOISTURE CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT WARNING TO REDUCE RISK OF FIRE OF SHOCK HAZARD DO NOT EXPOSE THIS RECEIVER TO RAIN OR MOISTURE J HUMAX Always be careful when using your product To reduce the risk of fire electrical shock and other injuries keep these safety precautions in mind when installing using and maintaining your machine Read all safety and operating instructions before operating your product Keep the safety and operating instructions for future reference Heed all warnings on the product receiver and in the operating instructions Follow all operating and use instructions Unplug the product from the wall outlet before cleaning Use a damp cloth Do not use liquid or aerosol cleaners Use a damp cloth for cleaning Never add any attachments and or equipment without approval of the manufacturer Such additions can increase the risk of fire electric shock or other personal injury A Do not use the product where contact with or immersion in water is a possibility such as near bathtubs sinks washing machines swimming pools etc Do not place the product on an unstable cart stand tripod bracket or table where it can fall A falling product can cause serious injury to a child or adult and serious damage to the appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with
11. MAX Guide of Main Menu Manual Search Find the services manually in the transponder you select This search mode included normal advanced and SMATV search Antenna Alternative Use the lt gt buttons to select an antenna number for the required satellite The satellite name will help you select antennas If you want to search in SMATV mode then select the Antenna Alternative 16 Frequency Use the lt gt buttons to enter the Frequency of the transponder you want to find MHz Or use the Number buttons 0 9 on the remote control Polarization Use the lt gt buttons to select the Polarization of the transponder Horizontal 18 V are output through LNB line Vertical 13 5 V are output through LNB line Symbol Rate Inputs the Symbol Rate of the transponder you want to find FEC Forward Error Correction Use the lt gt buttons to select the Forward Error Correction of the transponder You can select the value of auto 1 2 2 3 3 4 5 6 and 7 8 Network Search Select Yes and you can find more services using the home network Automatic Skip If you want to find free services then select Yes The scrambled services will not be automatically stored Advanced Press the button to find services using PIDs and more items for selecting PIDs will be displayed Press the button and Video Audio and PCR PID items will be added Enter the PID values for Video Audio and PCR When the Number b
12. Service Searching Search for new services This mode includes Antenna Setting and Manual Search Antenna Setting Select LNB parameters and switching connections Antenna Alternative Use the lt gt buttons to select an antenna number for the required satellite Antenna alternative 16 is fixed for SMATV and its name can t be changed Satellite Name Selects the satellite name that corresponds to the value of the Antenna Alternative Press the lt gt buttons and the satellite names you can memorize will be listed on the screen Use the 4 buttons to select a satellite name and then press the button This name will help you Select Antenna Alternative In Manual Search menu note 1 Press User defined and the keyboard image will appear on the screen Then you can enter satellite names LNB Frequency Use the lt gt buttons to select a LNB frequency or type on the dish You can select the LNB Frequency If the required LNB frequency is not available then press the Number buttons 0 9 on the remote control 22KHz Tone Use the lt gt buttons to select the antenna tone switch when LNB Frequency is universal 22KHz tone will be switched automatically DiSEqC Input Use the lt gt buttons to select a DiSEqC antenna switch type according to the option and location of DiSEqC switch Type Disabled Tone Burst A to B DiSEqC A DiSEqC B DiSEqC C DiSEqC D HUMAX 26 TTS Te 2 HU
13. connected the LNBs to the correct connections on the switch Check the Signal Level and the Signal Quality in the Signal Status menu Service Search No Signal in manual e Check the Signal Level and the Signal Quality in the Signal Status menu search e Check the LNB replace LNB if necessary e Check the cable from the LNB Check the position of the dish realign dish if necessary DiSEqC 1 0 Check that you have connected the LNBs to the correct connections on the switch Check that you have set the connected setting in the Antenna Setting menu aa HUMAX Problem Solution LED Error Message Amber only e Check whether the system ID is different for Software and STB Invalid system ID Amber amp Red e You need to contact your retail shop Incorrect data block CRC error Amber amp Red amp Green e You need to contact your retail shop Incorrect application CRC error e If you can t solve the problem even referring this Troubleshooting Guide contact us via our homepage Homepage http www humaxdigital com 32 HUMAX Main Menu TV Guide Parental Control Service Organizing System Setting Language Setting Menu Language OEMAR ASAM Organize All Services Audio Language Organize Favorite Subtitle Language Organize Radio Services Organize All Services Time Setting Current Time Organize Favorite Wakeup Time Organize Netw
14. e versions may be found at HUMAX website http www humaxdigital com It is recommended that users register to HCSA HUMAX Customer Service Area and periodically check for the availability of software upgrade There are three methods to upgrade the software a set top box to set top box download copies the software of the main unit into slave unit b pc to set top box download downloads the software directly from pc to the model requiring upgrade 6 HUMAX 0 Connecting the Set Top Box Front amp Real Panel HUMAX cr 3510 1 2 3 4 5 6 7 oF OPERATING LED GREEN Press to change services down and up Indicates that the STB is operating SMART CARD SLOT TV RADIO Insert the SMART CARD with it s Press to switch between TV and IC Chip part facing the bottom side Radio modes ERROR LED AMBER STANDBY Indicates that the STB has an error Press to switch between Operation and STANDBY LED RED erence odes Indicates that the STB is under Standby A CAUTION A RISK OF ELECTRIC SHOCK DO NOT OPEN y ENB OUT RS 232C R AUDIO L VIDEO RF OUT LNB IN RCA AUDIO OUTPUT Use to connect an antenna Use to connect an audio signal from your LNB OUT STB to an audio input jack on a VCR or TV Use it when connecting to another STB RCA VIDEO OUTPUT Use to connect video signal from your STB to a video input jack on a VCR or TV Use it when connecting to your PC RF
15. elect the desired service by using the 4 lt gt buttons 3 Press the button to view the selected service The right side scroll bar of the screen displays the location of the selected service in relation to All Services Service Favorite 1 To add the services to the Service Favorite use the Service Configuration at Service All or Service Organizing menu 2 When you press the Green button in the Service List the favorite service list will be displayed on the screen 3 When you want to see the services added to the favorite group use the 4 lt gt button Guide of Main Menu 1 TV Guide Your STB has an Electronic Program Guide EPG to help you 45 5 4 navigate through all the possible viewing options The TV Guide supplies information such as program listings and start and end times for all available services In addition detailed information about the program listings and start and end times for all available services In addition detailed information about the program is often available in the EPG the availability and amount of these program details will vary depending on the particular broadcaster ar re Ei BFE z T JES Eee 2 Parental Control Access to services and programs is controlled by a PIN Code i e a 4 digit secret code that is defined by the user The very first time you attempt to lock all services or lock programs by ratings the on screen menu will instruct yo
16. ements of Pay Per View events will be displayed e IPPV Impulse Pay Per View You can purchase an event during the active broadcast of the event without pre ordering The entitlements of Impulse Pay Per View events will be displayed In this menu you need PIN code Maturity Rating The STB is required by CryptoWorks TM to include a Parental Control facility for the viewing of restricted programs This can be set to Disable MR or PG Parental Guide to over 18 The correct PIN Code is required to change this option PIN Code In this menu you can make PIN Code enabled disabled or changed e Enable PIN Code You can enable the PIN Code Disable PIN Code You can disable the PIN Code e Modify PIN Code You can change the PIN Code by using the Number buttons 0 9 on the RCU You will need to enter the old PIN Code before you can enter new PIN Code Mail Box The STB can receive maximum 10 mails from program providers To check and see the mails press the button In the Mail list you can view or delete the mails If you store 10 mails and a new mail arrives the oldest mail will be erased and the new mail will be stored 3 6 Default Setting Reset STB to the default start set in the factory Enter the PIN Code and the message The default values are restored will appear on the center of screen If you want to restore again select OK Otherwise select EXIT 4 Utility STB supp
17. g the C_ button or changing services Plate is divided into Service Part and Event Part e Subtitle Teletext Scrambling Service Symbol These are automatically displayed when the broadcasting Station provides appropriate information e Signal Quality Bar EVENT PART Right side of the box EVENT PART consists of the following items Event name Event duration time Description of event State of reserved event Event Part shows the current and next event information gt button Use to move from the current event information to the next event information current event information the help window will appear on the screen the Time button program Once Daily or Weekly mode confirm the action Volume Control lt button Use to move from the next event information to the When the Help 2 button is pressed under I Plate display The Help window shows the extended current event information including Satellite Name Frequency Polarization Symbol Rate FEC The detailed information for the event can be displayed by pressing the Help button in the I Plate with event data displaying mode You can reserve the program in the event data display mode by using When the current data is displaying on the screen you can reset timer When you release the timer program mode then you will be asked to To adjust the volume level use the gt buttons or lt gt buttons To temporarily stop
18. gt buttons to select a new name and then Press the Yellow D button to finish renaming Lock Use the 4 buttons to select a service to be locked by your PIN Code Press the Yellow gt button and the symbol will be displayed at the right side of the service name Press the button and the message Saving changed Service Information will appear on the center of screen and simultaneously the selected service will be locked If you don t want to lock then press the button on the remote control If the message Do you want to save appears on the center of screen then select 600 To watch the locked service be sure to enter your registered PIN Code Skip Use the 4 buttons to select a service you want to skip 2 Press the Blue QO button and the symbol will appear at the right side of the service name Press the button and the message Saving changed Service Information will appear and simultaneously the selected service will be skipped If you don t want to skip then press the button If the message Do you want to save appears on the center of screen select Gx When the 4 buttons or gt buttons are used to select channels the skipped service channels will not be shown To watch the skipped service channels use the Number buttons 0 9 Service List or the EPG mode Rename on the center of screen press the button 24
19. ic time set the Wakeup Time and Service No of the STB Time Setting Mode to meet the starting time of the program and then do ON e Time and Recording Time of the VCR Time Setting Mode See your VCR manual for VCR ON Time and setting the Recording Time Viewing a program from the STB Free To Air or CABLE e See Connecting the Set Top Box to your TV using a RF CABLE 10 HUMAX NUMBER BUTTONS INFORMATION RED SOUNDTRACK GREEN 06 SUBITI E Reserved 11 HUMAX PAUSE BLUE TIME WHITE EXIT v v HUMAX RS 101N Remote Control Unit 15 90900 SANDBY FV SAT Reserved TV RADIO MUTE VENU gt LURSOR JK gt P JEL RUL Hecall NUMBER BUTTONS Press to select a service enter your PIN Code or Numbers on the menu INFORMATION RED Press to display the program information box on the screen This button functions same as the RED button on the menus SOUNDTRACK GREEN Press to display the soundtrack list for the current service And this button functions same as the GREEN button on the menus SUBTITLE Reserved PAUSE BLUE Press to pause the moving picture for seeing more careful And this button functions same as the BLUE button on the menus TIME WHITE Press to display the current time on the screen Press to reserve services on the Information box or EPG And this button functions same as the WHITE button on the men
20. inal part Unauthorized substitutions may result in additional damage to the unit e Upon completetion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in a safe operating condition e CATV system installation this reminder is provided to call the CATV system installer s attention to article 820 40 of the nec that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as Close to the point of cable entry as practical HUMAX 4 Support amp Copyright First and foremost our knowledge of the set top box marketplace along with technical expertise differentiates HUMAX Moreover we maintain very close working relationships with our customers We take a highly disciplined engineering approach to product design manufacture testing acceptance and to technical and maintenance support We conduct comprehensive testing of the units provide complete documentation and support and deliver the highest quality most consistent products on time and every time HUMAX supports you via its homepage with useful information and new software of the HUMAX s homepage Homepage http www humaxdigital com To provide you the convenience of usage HUMAX has the right to make changes and improvements to any of the products described in this manual and the manual of the prod
21. inch AUDIO R L RCA Cinch Volume and Mute Control Resolution 20 bits DAC Max 2 Vrms RS 232C Transfer rate 115 200 bps 9pin D sub Type S VIDEO Y C separated Video output for High Quality RF Modulator RF Connector 75Q IEC 169 2 Male Female Frequency 61 25 MHz 67 25 MHz Output Channel CH3 4 for the Remodulator TV Standard NTSC M Preset Channel CH3 Software changeable by Menu Power Supply Input Voltage 100 250V AC 50 60 Hz Type SMPS Power Consumption Standby Power Protection Physical Specification 0 C to 45 C 10 C to 70 C Storage Humidit 5 95 RH Non Condensing Please note The specification of the STB may be changed without notice in advance 36 HUMAX HTCR3510 700 e Do not attempt to service the product yourself Refer all servicing to qualified service personnel Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions when the power supply cord or plug is damaged if liquid has been spilled on the unit or if objects have fallen into the unit if the product has been exposed to rain or water if the product does not operate normally by following the operating instructions if the product has been dropped or the cabinet has been damaged when the product exhibits a distinct change in performance e If you make adjustments yourself adjust only those controls that are covered by the operating ins
22. lked on or pinched by objects placed on or against them Pay particular attention to cords at plugs convenience receptacles and the point where they exit from the unit e Unplug the product from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time This will prevent damage to the unit due to lightening and power line surges e Avoid overhead power lines An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system be extremely careful to keep from touching the power lines or circuits Contact with such lines can be fatal e Do not overload the wall outlet or extension cords Overloading can result in fire or electric shock e Do not insert anything through the openings in the unit where they can touch dangerous voltage points or damage parts Never spill liquid of any kind on the product e Ground outdoor antennas If an outside antenna EXAMPLE OF is connected to the product be sure the antenna ANTENNA GROUNDING is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code ANSI NFPA No 70 1984 provides information about proper grounding of the mast and supporting structure grounding of the lead in wire to
23. orks Wakeup Service No L Sleep Time A V Output Setting Audio Output Screen Mode Display Format NTSC Mode VHF Tuning Channel Other Setting OSD Transparency Info Box Display Time 33 HUMAX Installation Service Searching Antenna Setting Antenna Alternative Satellite Name LNB Frequency 22KHz Tone DiSEqC Input Manual Search Antenna Alternative Frequency Polarization Symbol Rate FEC Network Search Automatic Skip Advanced Video PID Audio PID PCR PID Conditional Access STBStatus General Smart Signal Detection Card Information Available Entitlements Maturity Rating PIN Code Mail Box Biorthythm Default Setting HUMAX 34 Specification Conditional Access Interface CryptoWorks Embedded 1 Slot Smart Card Tuner amp Channel IF IF Band width LNB Power amp Polarisation 22 KHz Tone Transport Stream Profile Level Aspect Ratio Video Resolution Audio Decoding Audio Mode Sampling Memory Main Processor Graphic MPEG amp 950 MHz to 2150 MHz 75Q unbalanced 25 to 65dBm 480 MHz 36 MHz Vertical 13 5V Horizontal 18V Current 500mA Max Overload Protection Version 1 0 QPSK 2 31 Ms s Convolutional Code Rate 1 2 2 3 3 4 5 6 and 7 8 with Constraint Length K 7 MPEG 2 MP ML 60 Mbit s Max 4 3 16 9 720 x 576 MPEG MusiCam Layer amp II System DRAM 35 HUMAX A V amp Data In Out VIDEO RCA C
24. orts additional functions such as Calendar and Biorythm At the Biorhythm use the 4 v lt gt buttons to adjust your birth year and date to see your current biorhythm status a a pd pp pk RE HS 5 nw oz 3246 TF SM Die 39 di a ii iF jl ti J Fi 30 HUMAX Troubleshooting Guide Problem Solution About STB Does not display any LED Check the main power cable and check that it is plugged into a suitable power outlet on the front panel or STB Check whether STB is in Standby mode has no power No Picture e Ensure that the STB is switched on see above e Check the video output port RCA RF is firmly connected to the TV or VCR e Check that you have selected the correct channel or Video Output on your TV e Check the brightness level of the TV Poor picture quality e See No Picture above e Check the signal level if this is low then try adjusting the alignment of your dish No Sound e See No Picture above e Check the volume level of the TV and STB e Check the Mute status of the TV and STB Remote Control does not Point remote control directly towards the STB operate e Check and replace batteries On Screen Error Messages No or Bad Signal e Check the LNB replace LNB if necessary e Check the cable from the LNB e Check the position of the dish realign dish if necessary e If you are using a DiSEqC 1 0 switch check that you have
25. rvice will be automatically selected Subtitle Language Select the Default Language for Subtitle when changing services Language provided Chinese Danish English Finnish French German Italian Norwegian Portuguese Spanish Swedish and more HUMAX 20 ae HUMAX Guide of Main Menu Time Setting You can set the Current Time and Wakeup Time in this mode Furthermore the Service Number in the Wakeup Time mode and Sleep Time standby mode can be set When a VCR is connected recording can be automatically done according to Wakeup Sleep Time Setting Current Time To set the Current Time enter the Offset value using the standardized information of current service area The time setting will be used as the standardized time for the l Plate TV Guide Wakeup and Sleep timer Time Offset Current time is based on TDT Time and Data Table at the stream of the current service Wakeup Time Select the time when STB is turned on Use the Number buttons 0 9 on the remote control unit to enter your Wakeup Time Wakeup Service No Use the lt gt buttons to set the service number provided for the set Wakeup Time Use the TV Radio lt button on the remote control unit to toggle TV Radio service Service Name The Service Name that has been determined by the Wakeup Service No will be shown Sleep Time Depending on Time Setting select the time when STB is turned off A V Output Setting
26. service and displays the state of the STB Enter the submenus after selecting the Installation Mode in the Main Menu 3 1 System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units This mode includes Language Setting Time Setting A V Output Setting VHF Tuning and Other Setting Language Setting Select the language for Menu Audio or Subtitle 1 Select the highlighted Language Setting using the 4 buttons in the System Setting mode and then press the button 2 Select the highlighted Menu or Audio Subtitle Language and press the lt gt buttons and the language list will be displayed 3 Use the a v buttons to move to a language you want and then press the button to finish setting Menu Language Select a language for the menu or banner OSD in this mode Only English is provided Audio Language Select the Default Language for audio when changing services If you change the current service your STB will initially select the previously memorized Audio Language If the Audio Language of current service 16 not provided at this time you should reselect a language on the Audio Language menu Languages provided Chinese Czech Danish Dutch English Finnish French German Greek Hungarian Italian Portuguese Rumanian Russian Spanish Swedish Turkish and more If no language is provided then the default language of current se
27. text the Teletext icon El is displayed on the i plate 14 HUMAX 1 00965 TORIC J mi ee 7A ki 00905 HHE a TH ki a ITE iA 2 Tomei STS UP ie 2 er _ TE monou e ln HUMAX ii phan Guide of Functions F el Fr Eas my Service List To select the desired service in the service list you should firstly display the service list using button Use 4 v lt gt buttons to select a service and press 09 button Also use gt buttons to select a service directly in the service list The Service List consists of Service All and Service Favorite On the Service List you can change the attributes of a service through the Service Configuration A V button Use to move to the previous or next service lt gt button Use to move to the forward or backward service maximum 6 services Red button CD Service All Green button Service Favorite Service Configuration To change the attributes of a service 1 Use the a v lt gt buttons to move a service you want to change in the Service All or Service Favorite mode 2 Press the Menu 660 button 3 Use the 4 buttons to move to an item such as favorite lock skip delete you want on the Service Configuration screen 4 Use the lt gt buttons to select Press the button to complete Service All 1 To display the service list press the 00 button Use Red CiD button to select the Service All List 2 S
28. the product Follow the manufacturer s instructions when mounting the unit and use a mounting accessory recommended by the manufacturer Move the product and cart with care Quick stops excessive force and uneven surfaces can make the unit and cart unsteady and likely to overturn Provide ventilation for the product The unit is designed with slots in the cabinet for ventilation to protect it from overheating Do not block these openings with any object and do not place the product on a bed sofa rug or other similar surface Do not place it near a radiator or heat register If you place the product on a rack or bookcase ensure that there is adequate ventilation and that you ve followed the manufacturer s instructions for mounting 2 HUMAX Important Safeguards e Operate your product only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your appliance dealer or local power company e Use only a grounded or polarized outlet For your safety this product is equipped with a polarized alternating current line plug having one blade wider than the other This plug will fit into the power outlet only one way If you are unable to insert the plug fully into the outlet try reversing the plug If the plug still does not fit contact your electrician to replace your outlet e Protect the power cord Power supply cords should be routed so that they won t be wa
29. tructions Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal e When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorized substitutions may result in additional damage to the unit e Upon completetion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in a safe operating condition e CATV system installation this reminder is provided to call the CATV system installer s attention to article 820 40 of the nec that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as Close to the point of cable entry as practical HUMAX 4
30. u to assign a PIN Code Later on if necessary you can change it 3 Installation The Installation mode allows you to have the information of setting services and newly set services language time organize search Furthermore you can recognize the states of hardware and software versions and signals from your STB 4 Utility This menu provides Calendar and Biorhythm 16 HUMAX Guide of Main Menu 1 TV Guide You can watch a program being shown and reserve it in the TV Guide mode To enter the TV Guide mode Press the EPG 69 button on the remote control unit or select the TV Guide on the Main Menu To select the TV Radio Guide Press the button on the remote control unit and TV Guide will be switched to the Radio Guide TV Guide mode includes four different modes To select each mode use the following buttons Red Ci_ button Use to display the current or next program list Green button Use to display the program list for one week e Yellow button Use to display the reserved program list e Blue CiD button Use to display the simple TV Guide list Quick mode NOW NEXT mode Show the informations of the program that are played now or will be played next time This mode consists of the service name event name event duration time current time and on screen display window To watch a program you want through the display window Use the gt buttons to select a program you
31. ucts without notice Copyright 2000 HUMAX Co Ltd All rights reserved Warning HUMAX cannot be held responsible for any kind of problems caused by the use of unofficial softeware The use of software versions other than HUMAX official software will void the manufacturer s warranty It is advised that only the formal software released from HUMAX should be used in all HUMAX product range HUMAX Reference 1 Connect a Satellite antenna To the digital receiver you can connect either a single satellite antenna directly or through converter box several antennas or LNB of multi feed equipment You can connect a further Sat receiver for example analog with the receiver of common antenna equipment that has satellite signals 2 Loop Through If you have another analogue or digital STB and you wish to use the same LNB then you can connect it via the loop through Connect one end of a Coaxial cable to the LNB OUT on the STB and connect the other end to the LNB IN on your second STB 3 Software Upgrade HUMAX digital set top box is a highly sophisticated product incorporating one of the best software applications Whenever a problem is found with this software or in fact extra functions or enhanced applications are added the software in the equipment has to be upgraded In order to maintain proper performance of the product it is essential to have the most up to date software The latest news and release of softwar
32. us EXIT Press to return to the previous menu and screen V V Volume up down buttons Press to increase or decrease the volume STANDBY Press to switch between Operation and Standby modes 6 OO TV SAT Reserved TV RADIO Press to switch between TV and Radio modes MUTE Press to temporarily cut off the sound MENU Press to display the Main Menu on the screen or return to the screen from a sub menu screen CURSOR Press to move the highlight bar for selecting options on the menus And this button is used to change services up down and increase or decrease the audio volume OK Press to display the service list This button is used to select the item on the menus P P Program up down buttons Press to tune to the next or previous service Press to move up or down pages on the menus HELP Press to display the help box on the screen EPG Electronic Program Guide button displays the TV Radio Program guide RCL Recall Press to select the channel that was previously viewed e Please note The design of Remote Control Unit may be changed without notice in advance 12 HUMAX Guide of Functions Information Box I Plate SERVICE PART Left side of the box Service Part consists of the following item Plate icon Current Time Service Name Service Number icon The details of Service Part and Event Part are automatically displayed on the I Plate when pressin
33. uttons 0 9 are pressed a hexadecimal table will be displayed Then you can t enter the PID values using the keyboard 3 4 Status Display the STB manufacture information and the signal status bar graphic STB Status Display the STB manufacture information H W version S W version Date and so on Signal Dection This menu will help the satellite dish be aligned up to 100 Signal Level and Quality 3 5 Conditional Access for CryptoWorks Embedded This menu allows the user to view and change information on the Smart Cards such as available entitlements Maturity Rating and PIN Code Besides you can view the mails from program providers General Smart Card Information Card label will be displayed as issuer s name on the TV screen Programs or Bouquets which are encrypted by only CryptoWorks TM and distributor labels are displayed on the TV screen To get more detailed information of viewing rights of channels or bouquets press the button e Smart Card details You can see smart card address the validity date and current maturity rating i a ea a a HUMAX 28 Guide of Main Menu 29 HUMAX PEUCETI C EEE The user will select a single program provider by selecting its distributor label and you can get the information of available entitlements e Subscription You can see the valid period of each service e PPV Pay Per View If You purchased events in advance the entitl
34. vice Organizing This menu gives users access to options that allow them to organize their Networks TV services and Radio services The default PIN Code is Organize TV Services Organize services that are included in memory for TV Organize All Services Delete Move Lock Skip or Rename each TV service on all TV service list Delete Use the a v buttons to select a service you want to delete When the Red CD button is pressed the service will be colored 10 gray 3 When the button is pressed the message Saving changed Service Information will appear on the center of screen and simultaneously the service will be deleted NO If you don t want to delete then press the button If the message Do you want to save appear on the center of screen press the button Move 1 Use the a v buttons to select a service you want to move 2 When the Green C button is pressed the icon amp will appear in front of the service number 3 Use the a v lt gt buttons to move to the location you want to use 4 When the button is pressed the message Saving changed Service Information will appear on the center of screen and simultaneously the location of service will be changed If you don t want to move press the button h s Use the a v buttons to select a service you want to rename Press the White button and the keyboard image will appear Use the 4 v lt
Download Pdf Manuals
Related Search