Home

FUNAI CR320IL8 CRT Television User Manual

1. OWNER S MANUAL CR3201L8 L n Aaw TO RECEIVE DIGITAL SIGNAL YOU MUST CONNECT ANTENNA If you need additional operating assistance after reading this owner s manual or to order replacement accessories please call TOLL FREE 1 800 474 0045 or visit our WEB SITE at http www funai corp com 2007 Funai Electric Co Ltd WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLI ANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To REDUCE THE RISK OF ELEC TRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THIS SYMBOL INDICATES THAT DANGER OUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAIN TENANCE INSTRUCTIONS IN THE LITERA TURE ACCOMPANYING THE APPLIANCE The important note is located on the rear of the cabinet AA GLEE RADE SAFEGUARDS READ INSTRUCTIONS AIl the safety and operating EN instructions should be read before the appliance is operat ed RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS AIl warnings on the appliance and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS AIl operating and use instruc tions should
2. Picture blurred e When the outside antenna is used check the wire condi tion and connection e Try to view other channels It may be the problem on the broadcasting station Ghosts in picture e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condi tion and connection e Electric waves may be interfered due to the electric appli ances etc nearby e Try to view other channels It may be the problem on the broadcasting station I ooo 34 Bars on screen Picture rolls vertically Different color marks on screen Poor reception on some channels Picture OK sound poor Remote control doesn t work Problems on Closed Caption Misspelled captions are displayed Captions are not entirely displayed or captions are delayed behind the dia logue Captions are displayed as a white box No caption is displayed in the Closed Caption supported program No caption is displayed when playing the videotape containing captions Black box is displayed in the screen e When the outside antenna is used check the wire condi tion and connection e Electric waves may be interfered due to the electric appli ances etc nearby e When the outside antenna is used check the wire condi tion and connection e Electric waves may be interfered due to the electric appli ances etc nearby e Try to view other channels It may be the problem on the broadcasting stat
3. e When the scanning and memorizing are com pleted the smallest memorized channel in the CATV will be displayed DTV When scanning DTV Select digital mode by pressing DTV TV 2 Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 3 Select CHANNEL SET e Using CH AY select CHANNEL SET PICTURE gt CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP e Press VOL A 4 Using CH 4 7 select AUTO PRESET CH DTV ADD DELETE DTV gt AUTO PRESET CH DTV AUTO PRESET CH TV DTV AUTO PRESET CH CATV CATV takes approx 50min e Press VOL A Scanning and memorizing the channels auto matically starts AUTO PRESET CH DTV HUU e When the scanning and memorizing are com pleted the smallest memorized channel in the digital broadcasting will be displayed 2 Using CH A V select AUTO PRESET DTV When scanning both TV and DTV at the same time You can access this menu from both modes analog digital Display the menu screen and select CHANNEL SET e Press MENU and select CHANNEL SET using CH A V PICTURE gt CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP e Press VOL A CH TV DTV OTHER SETTINGS ADD DELETE DTV AUTO PRESET CH DTV K AUTO PRESET CH TV DTV AUTO PRESET CH
4. e Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry e Never use a solvent or alcohol Do not spray insec ticide liquid near the TV Such chemicals may Cause damage and discoloration to the exposed surfaces PICTURE TUBE CLEANING Wipe the picture tube of the TV with a soft cloth Before cleaning the picture tube disconnect the power cord SEHVICING Should your unit become inoperative do not try to correct the problem by yourself There are no userserviceable parts inside Turn off unplug the power cord and please call our help line mentioned on the front page to locate an Authorized Service Center A degaussing circuit in this unit clears up color errors on the TV screen Color errors occur when there is any excess magnetism close to the unit This circuit is designed to operate once when the unit is first plugged in If you see minor color errors on the screen unplug the unit for approximately 30 minutes EN S Video output It delivers independently each sig nal of color C and luminance Y to TV as video signals so that higher quality picture will be gained When you plug in the unit again the degaussing cir cuit will operate to clear errors Take this step any time the TV screen is accidentally magnetized or when you move the unit IR SIGNAL CHECK If the remote control doesn t work properly you can test if the remote control send
5. interlaced video signal EN EXTERNAL CONNECTION When using the Audio Video cables This is the general method to connect this TV to video devices with the video or audio output jacks such as a VCR etc When the audio jack of video devices is monaural connect the audio cable to the AUDIO L jack T d Video cable not included oc rd To VIDEO1 To video input jack output jack O VIDEO 4 INPUT IO OUTPUT lt lt LL LT ANT IN ak S R z o audio output jacks COMPONENT INPUT A To AUDIO Rear of this TV input jacks Audio cable not included When using the S Video cable This is how to connect this TV to the video devices with the S VIDEO OUT jack You can expect better pic ture quality than the normal video cable connection Use the S Video cable not included for connection S Video cable not included To S VIDEO input jack To S Video Ex output jack VIDEO 1 INPUT AUDIO VIDEO S VIDEO of OUT OUT cooo cI D oo L T DVD VCR with the S Video output jack ci To audio output jacks l Rear of this TV Audio cable not included To AUDIO input jacks NOTE If you connect to the S VIDEO jack and the VIDEO jack at the same time S Video connection will have priority 9 EN USING FRONT A V CONNECTION This is how to use the A V jack in front of this TV and connect to external devices This is useful when you use game playing devices
6. CATV CATV takes approx 50min e Press VOL A Scanning and memorizing the channels auto matically starts AUTO PRESET CH TV DTV DIT e When the scanning and memorizing are com pleted the memorized smallest channel in the analog broadcasting will be displayed If no analog channel is memorized the smallest memorized channel in the digital broadcasting will be displayed NOTES e If you press POWER or MENU while setting AUTO PRE SET CH AUTO PRESET CH setting will be canceled e If there is no TV signal input NO TV SIGNALS will appear on the display after the completion of channel scanning NO TV SIGNALS 29 EN CHANNEL ADD DELETE The CHANNEL ADD DELETE function lets you add the channel that was not added by the AUTO PRE SET CH function due to the bad reception status at the initial setting You can also delete the unneces sary channels Number buttons CH A V lt gt _ _ ____ _ Select analog mode by pressing DTV TV 2 Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGESP FRA V CHIP SET UP CAPTION OFF 3 Select CHANNEL SET e Using CH A F select CHANNEL SET PICTURE gt CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF e Press VOL A The following CHANNEL SET screen is dis played K ADD DELETE AUTO PRESET CH TV AUTO PRESET CH CATV AUTO PRESET CH
7. DELETE with VOL A V NOTE e Color of channel number displayed at the right top of the screen Blue Green The selected channel will be added Pink Red The selected channel will be deleted 6 To exit the menu press MENU NOTES e The menu will disappear automatically after about 10 sec onds e In the digital mode DTV you can add or delete channels only for Major channel e Once you delete a DTV channel you cannot add the chan nel again without performing AUTO PRESET CH again Refer to AUTO PRESET CH on page 28 LANGUAGE SELECTION You can change the language used on the menu screen ENGLISH SPANISH or FRENCH can be selected How to change the language in the menu screen shown below OM CH A V MENU VOL A V a lt j UU Display the menu screen ei e Press MENU Lu The following menu screen is displayed O K PICTURE CHANNEL SET ENGESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 2 Select ENG ESP FRA e Using CH A select ENG ESP FRA PICTURE CHANNEL SET gt ENGJESP FRA V CHIP SET UP CAPTION OFF DTV SET UP e Every time you press VOL A V the language will be switched as below Select the language ENG lish t ESP a ol t FRA n ais 3 To exit the menu press MENU 31 EN D S T After the initial setting you set when you first turned on the power you can set the D S T Daylight Saving Time again When
8. aes owe OEE RRR eee Sos ee K ee 28 AUTO PRESET Gal acexe6 cook beh or es hs beni ehh eee ee een eee et erent a ehe tees omaweye ee es 28 CHANNEL ADD DELETE lt x2 es cmrewds heb som bem hob ood ede ee ES R EEO REO RE Ree ewe ee ee ex 30 LANGUAGE SELECTION 2 c42cd eu 4880660840680 56068050 Sew bd whe R EEE EE ORE eee KR ee ou 31 5 TTT 32 TIMEZONE onc 6 RZ R 9 9 Fede eed toa bk Bh eee eee kee ee ee Bee Be bee 33 MISCELLANEOUS lt lt x eee 34 TROUBLESHOOTING GUIDE ose ncaa see ede eee os ee eee eee Se eee L 34 GEO GOARI serri bee eka w ee eee ee be eee ees Ree Be eee ee eee eee 36 MAINTENANCE A aa peed ci sea head dee woh ee N oe bol ee eh ew bee eh ee wo ee ee ee 36 SPECIFICATIONS se oes ose eb eee A R Oe eee eee one eed 37 WARRANTY Gore cotter ic ee ee ah ee Sh wm oh ee ea ee a ae a ee eh ae ae ae Back cover SYMBOLS USED IN THIS MANUAL The following is the description for the symbols used in this manual Settings only for the analog mode Settings only for the digital mode s If there is no symbol under the function heading those are common settings for the analog mode and digital mode EN PREPARATION FOR USE CONNECTION This section describes how to connect this TV to reception and other sources MAKE SURE YOU HAVE AN ANTENNA As DTV is only available over the air you need an antenna to receive a digital signal ANTENNA BASIC CABLE CONNECTION 1 When connecting TV to antenna Connect the coaxial cable
9. and in particular specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical The serial number of this product may be found on the back of the TV No others have the same serial num ber as yours You should record the number and other vital information here and retain this book as a perma nent record of your purchase to aid identification in case of theft Model No Date of Purchase Serial No Dealer Phone No Dealer Purchase from Dealer Address EN FEATURES e DTV TV CATV This TV lets you easily switch TV NTSC and DTV ATSC with the remote control This feature enables you to simply view from conventional analog TV to Standard Definition TV High Definition TV You can also con nect this TV to CATV if you have a CATV box s Program Information Display DTV You can display the title contents and other information of the current DTV program on the screen s Auto Preset Channel This TV can automatically scan and memorize the channels receivable in your residential area This feature eliminates the need of a difficult setting procedure e V CHIP This feature lets you set the viewing limitations to prevent your children from watching inappropriate programs e Closed Caption Decoder This TV contains the built in Closed Caption Decoder that displays text across the screen It allows you to read the dialogue of a TV program or othe
10. be followed CLEANING Unplug TV from the wall outlet before clean ing Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning EXCEPTION A product that is meant for uninterrupted service and that for some specific reason such as the possibility of the loss of an authorization code for a CATV converter is not intended to be unplugged by the user for cleaning or any other purpose may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5 ATTACHMENTS Do not use attachments not recommend ed by the TV manufacturer as they may cause hazards WATER AND MOISTURE Do not use this TV near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like ACCESSORIES Do not place this TV on an unstable cart stand tripod bracket or table The TV may fall causing serious injury to Someone and serious damage to the appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the TV Any mounting of the appliance should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn PORTABLE CART WARNING SYM
11. can check the remained time per 1 minute by pressing SLEEP SLEEP 16 NOTES e When you disconnect the unit from the AC outlet or when a power failure occurs the sleep timer setting will be can celed e To cancel the sleep timer press SLEEP repeatedly until SLEEP 0 is displayed e The Sleep Timer setting display will automatically disappear after 10 seconds MENU SCREEN This section describes the overview of the menu screen displayed when you press MENU For more details see the reference page for each item The menu screen consists of the function setting items below gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP e PICTURE You can adjust the picture quality BRIGHT CON TRAST COLOR TINT SHARPNESS Refer to PICTURE ADJUSTMENT on page 20 s CHANNEL SET You can automatically scan the receivable chan nels and add or delete the channel as necessary Refer to AUTO PRESET CH on page 28 s ENG ESP FRA You can change the language ENGLISH SPAN ISH FRENCH displayed in the menu screen Refer to LANGUAGE SELECTION on page 31 e V CHIP SET UP You can set the viewing limitations Refer to V CHIP on page 24 e CAPTION You can change the display format for CLOSED CAPTION which displays the dialogue of a TV program or other information across the screen Refer to CLOSED CAPTION on page 21 DTV e DTV SET UP You can set the scree
12. e Every time you press VOL A V tal mode LETTERBOX and ZOOM will be switched You can select your favorite display mode and enjoy alternately the program D10 0 WwW D10 OM DW NZ CH A V LETTERBOX ZOOM LETTERBOX E MENU VOL A V Display the digital supported program in full screen j i i LLI Black borders will spread in the upper and V lower screen C lt DI ZOOM 5 aa a2 ont Enlarge and display the center area of the digital Display the menu screen supported program a e Press MENU a The right and left side of image will be cut off The following menu screen is displayed 4 To exit the menu press MENU gt PICTURE CHANNEL SET NOTE eres f You may not switch the display mode depending on the pro CAPTION OFF gram DTV SET UP 2 Select DTV SET UP e Using CH AY select DTV SET UP PICTURE CHANNEL SET ENG ESP FRA V CHIP SET UP CAPTION OFF gt DTV SET UP e When you press VOL A the menu screen will be displayed as below gt DTV DISPLAY LETTERBOX DTVCC D S T Daylight Saving ON TIME ZONE ALASKA 27 EN Orther SETTINGS AUTO PRESET CH If you switch wires e g between antenna and CATV or if you move the TV to a different area after the initial setting or if you need to add the DTV channel you deleted you will need to perform AUTO PRESET CH again This function lets you easily select the receivable channels with CH A and the TV memori
13. etc When the audio jack of external devices is monaural connect the audio cable to the AUDIO L jack Ex Video cable not included To video output jack Front of this TV 009 VIDEO L AUDIO R PS LA Video Camera Video Game T To VIDEO input jack To audio output jacks Audio cable not included To AUDIO input jacks DIGITAL AUDIO CONNECTION If you connect this TV to a digital supported audio device you can enjoy much more of the digital broadcast ing programs with the feeling of being at a live program Use the digital audio coaxial cable not included for connection Digital audio coaxial cable O O not included C a See C To DIGITAL AUDIO ee oo OUT jack COAXIAL 0 q To coaxial digital audio input jack COMPONENT INPUT MD deck DAT deck etc Rear of this TV Dolby Digital decoder pDdOIDOLBY Manufactured under license from Dolby Laboratories Dolby and the double D DIGITAL symbol are trademarks of Dolby Laboratories 10 EN INSTALLING THE BATTERIES UU Install two AA batteries matching the polarity indi cated inside battery compartment of the remote control BATTERY PRECAUTIONS e Be sure to follow the correct polarity as indicated in the battery compartment Reversed batteries may cause damage to the device e Do not mix different types of batteries together e g Alkaline and Carbon Zinc or old batteries w
14. BOLE D AVERTISSEMENT POUR APPAREIL ET MEUBLE A ROULETTES AMEUBLES Cet appareil ne doit tre plac que sur un meuble avec ou sans roulettes recommande par le fabricant Si vous l installez sur un meuble a roulettes d placez les deux ensembles avec pr caution Un arr t brusque l utilisation d une force excessive et des surfaces irr guli res risquent de d stabiliser l ensemble et de le renverser VENTILATION Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheat ing these openings must not be blocked or covered The openings should never be blocked by placing the TV ona bed sofa rug or other similar surface This TV should never be placed near or over a radiator or heat register This TV should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to cme 31 K 10 POWER SOURCES This TV should be operated only from P 9 k the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your appliance dealer or local power company For TVs intended to operate from battery power or other sources refer to the operating instructions GROUNDING OR POLARIZATION This TV is equipped with a polarized alternating current line plug a plug havi
15. DTV DISPLAY LETTERBOX DTVCC D S T Daylight Saving ON MW Ww WM Ww TIENT gt TIME ZONE ALASKA 4 Select your TIME ZONE VOL A V e When you use VOL A V the TIME ZONE will be switched as below U ALASKA Display the menu screen Le E HAWAII Ww e Press MENU or The following menu screen is displayed PACIFIC Lu t gt PICTURE MOUNTAIN O CHANNEL SET ENG ESP FRA S CENTRAL DTV SET UP EASTERN ATLANTIC 2 Select DTV SET UP l e Using CH A V select DTV SET UP e Based on the world standard time information re acquired from digital broadcasting the time dif ACES ference will be adjusted as below V CHIP SET UP a ALASKA e When you press VOL A the following menu PACIFIC screen is displayed MOUNTAIN K DTV DISPLAY LETTERBOX ae Saving ON EASTERN TIME ZONE ALASKA 5 To exit the menu press MENU 33 EN MiisceLLaneous TROUBLESHOOTING GUIDE Before calling for service check the following chart again No power e Be sure the Power cord is connected to outlet s If a power failure occurs unplug the power cord for 30 minutes to allow the unit to reset itself No picture or sound e Check if the power is on e Check the outlet connection e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condi tion and connection e Try to view other channels It may be the problem on the broadcast
16. ER THIS WARRANTY This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by an unauthorized service center This limited warranty does not apply to any product not purchased and used in the United States This warranty only covers failures due to defects in material or workmanship which occurs during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or product not sup plied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication alter ation faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CON TROL ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PAR
17. ESSORIES e Owner s Manual e Remote control unit 1EMN22170 NE614UE e Batteries AA x2 for remote control not included s If you need to replace these accessories please refer to the PART NO above the illustrations and call our help line mentioned on the front page e Depending on your antenna system you may need different types of Combiners Mixer or Separator Splitter Contact your local electronics store for these items PRECAUTIONS e Place your TV in a room with adequate ventilation e Keep your TV set away from sources of direct heat such as heat registers or direct sunlight s Do not place your TV on soft surfaces such as rugs or blankets e Leave enough room for air to circulate around the bottom top and back of the set FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner s manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made RADIO TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed a
18. HING EXTERNAL INPUT When you connect external devices including a video cassette recorder and home audio system you can easily switch the input mode with the remote control OM BW CHANNEL INPUT SELECT Switch the input mode e When you press INPUT SELECT on the remote control the input mode will be switched as below TV channel VIDEO 1 or S VIDEO Rear 1 VIDEO2 Front 4 COMPONENT Rear e To use the VIDEO 1 INPUT jack on the rear of the TV select VIDEO 1 If you use the S VIDEO jack S VIDEO is dis played e To use the jack on the front of the TV select VIDEO 2 e To use the COMPONENT INPUT jacks on the rear of the TV select COMPONENT 18 EN e When you press INFO the current external input mode will be displayed at the top right of the screen 1 When using VIDEO 1 INPUT jack VIDEO 1 2 When using VIDEO 2 INPUT jack VIDEO 2 3 When using COMPONENT INPUT jacks COMPONENT 4 When using S VIDEO INPUT jack S VIDEO Optionat SETTINGS SLEEP TIMER The SLEEP TIMER function will automatically turn off the power of the unit at a preset time OM CHANNEL RECALL 7 Use SLEEP TIMER e Press SLEEP on the remote control e The setting display for SLEEP TIMER is shown in the screen SLEEP 0 2 Set the timer e Every time you press SLEEP the time increases by 10 minutes e You can set the timer up to 90 minutes e After setting you
19. K BLOCK BLOCK 7 To exit the menu press MENU NOTES e You cannot access the setup menu when the PROTECTED PROGRAM by message appears You need to move to an unblocked channel to access the setup menu e When you select a rating and set it to BLOCK the higher ratings will be blocked automatically The lower ratings will be available for viewing e When you set X to VIEW all ratings turn to VIEW auto matically OPTIONAL SETTINGS 25 EN CHANGE CODE 4 Display the CHANGE CODE screen e Using CH A select CHANGE CODE TV RATING MPAA RATING gt CHANGE CODE e Press VOL A 5 Change the access code e Use the Number buttons on the remote con trol and enter the NEW CODE 4 digit e Enter code again in CONFIRM CODE space NEW CODE CONFIRM CODE L 6 To exit the menu press MENU NOTES e Make sure to enter the exact same new code in the CONFIRM CODE space as one in the NEW CODE space If they are different the NEW CODE space is cleared for reentering e Your personal access code will be erased and return to the default 0000 when a power failure occurs or when you turn off the power using a wall switch If you forget the code unplug the power cord for 10 seconds to restore the access code to 0000 26 EN CHANGING THE SCREEN DISPLAY MODE 3 Select the display ag ttst S 2 types of display modes can be selected in the digi
20. Malaysia L4908UJ 1EMN22170 Kk KKK
21. TICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED IN TO AN AUTHORIZED SERVICE CENTER THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT IF NO PROOF OF PURCHASE IS ATTACHED THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED IMPORTANT THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE IF AT ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT PLEASE CONTACT FUNAI CORP ATTENTION FUNAI CORP RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS To obtain warranty service you must take the product or deliver the product freight prepaid in either its original packaging or packaging affording an equal degree of protection to any AUTHORIZED SERVICE CENTER FUNAI CORP will not reimburse you for any service done by unauthorized service providers without prior written approval To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries please contact us at FUNAI CORPORATION Customer Service Tel 1 800 474 0045 http www funai corp com 19900 Van Ness Avenue Torrance CA 90501 Printed in
22. TV DTV AUTO PRESET CH CATV CATV takes approx 50min 30 EN 4 Select ADD DELETE e Using CH A V select ADD DELETE gt ADD DELETE AUTO PRESET CH TV AUTO PRESET CH CATV AUTO PRESET CH TV DTV AUTO PRESET CH CATV CATV takes approx 50min e Press VOL A 5 Select the channel you want to add or delete s Using CH A V or the Number buttons select the channel ADD DELETE TV e Select ADD or DELETE with VOL A V NOTE e Color of channel number displayed at the right top of the screen Blue Green The selected channel will be added Pink Red The selected channel will be deleted 6 To exit the menu press MENU DTV Select digital mode by pressing DTV TV 2 Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 3 Select CHANNEL SET e Using CH A V select CHANNEL SET PICTURE gt CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP e Press VOL A 4 Select ADD DELETE DTV e Using CH A V select ADD DELETE DTV K ADD DELETE DTV AUTO PRESET CH DTV AUTO PRESET CH TV DTV AUTO PRESET CH CATV CATV takes approx 50min e Press VOL A 5 Select the channel you want to add or delete s Using CH A V or the Number buttons select the channel ADD DELETE DTV e Select ADD or
23. V CHIP SET UP e Using CH A V select V CHIP SET UP PICTURE CHANNEL SET ENGJESP FRA gt V CHIP SET UP CAPTION OFF DTV SET UP e Press VOL A The access code entry screen is displayed ACCESS CODE ea 24 EN 3 Enter the access code s Use the Number buttons and enter the 4 digit number e When you have not set up your access code enter OOOO e When the access code is correct the following V CHIP SET UP screen is displayed gt TV RATING MPAA RATING CHANGE CODE See the following description for setting each item AI TV RATING 4 Display the TV RATING screen e Using CH A V select TV RATING Press VOL A gt TV RATING MPAA RATING CHANGE CODE 5 Set TV RATING e Using CH A V select the rating gt TV Y VIEW lt Selection gt eTV Y eTV Y7 lt Rating Category Explanations gt Appropriate for all children Appropriate for children 7 and older General Audience Parental Guidance suggested Unsuitable for children under 14 Mature audience only e TV G e TV PG e T V 14 e TV MA 6 Set BLOCK or VIEW e Press VOL A and set to BLOCK or VIEW for the rating without sub categories TV Y VIEW TV Y7 _ MEW gt TV G BLOCK TV PG DLSV BLOCK TV 14 DLSV BLOCK TV MA LSV BLOCK e For the rating with sub categories they are dis played by pressing VOL A twice Press CH AY and select the rating Then pre
24. and refer servicing to qualified service person nel under the following conditions a When the power supply cord or plug is damaged or frayed b If liquid has been spilled or objects have fallen into the TV c If the TV has been exposed to rain or water d If the TV does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni cian to restore the TV to its normal operation e If the TV has been dropped or damaged in any way h When the TV exhibits a distinct change in performance this indicates a need for service REPLACEMENT PARTS When replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part Unauthorized substitu tions may result in fire electric shock injury to persons or other hazards 20 21 SAFETY CHECK Upon completion of any service or repairs to this TV ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition 22 HEAT This TV product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat EN IMPORTANT SAFEGUARDS SUPPLIED ACC
25. ay without the express written consent of Funai All other trademarks used herein remain the exclusive property of their respective owners Nothing contained in this manual should be construed as granting by implication or other wise any license or right to use any of the trademarks displayed herein Misuse of any trademarks or any other content in this manual is strictly prohibited Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law EN SUPPLIED ACCESSORIES PRECAUTIONS FEATURES Contents IMPORTANT SAFEGUARDS 0 0 0 00000 eee ee eee eee eee ee eee 2 SUPPLIED m TTT 4 PRECAUTIONS eeii ote eeu ew Bae oe ea es ee ee ede ba dane LE oe deen ee 4 FEATURES esestee Sete ces ase ee Ge BeBe aek eee ae he Rea wee dee ee Be smet eee eee ee ee oe ost 5 PREPARATION FOR USE lt lt lt x eee 7 CUINES PION a a e e 5 wate wad eeu ds hace oe A a tetas T ARA TE R RA RTE RA E H ANTENNA BASIC CABLE CONNECTION 7 CONNECTION TO CABLE SATELLITE BOX 00 ee eee eee eee ee ee eee ee ees 8 COMPONENT CONNECTION 42640544600 fee endured anid eda bed acaded ad weleae eae ROMS 8 EXTERNAL CONNECTION lt e e a R Ra aR RRR ad s R aR RR ad 24 s dad edo see ee be ox 9 USING FRONT A V CONNECTION 224 0cd ween ov boeawewsdews oOo aed weee gece edsi wae 10 DIGITAL AUDIO CONNECTION eau bdbave wauewebeed acd wawe cd Je4 bud wees 10 INSTALLING THE BATTERIES da ad wow eae bOG avs wa
26. c waves are interfered due to buildings weather conditions etc incomplete captions may be dis played e Broadcasting station may shorten the program to insert the advertisement The closed caption decoder cannot read the information of the shortened program e The videotape may be illegally copied or the caption sig nal may fail to be read while copying e TEXT mode is selected for caption Select C1 C2 or OFF MISCELLANEOUS 35 GLOSSARY ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broad casting standards High Definition TV HDTV Ultimate digital format that pro Letterbox Letterbox refers to the format dis playing a wide screen picture on a standard 4 3 aspect ratio televi sion screen with black bars above and below It is used to maintain the aspect ratio of the original source such as a motion picture SAP Secondary Audio Program Second audio channel delivered separately from main audio chan nel This audio channel is used as an alternate in bilingual broad casting duces high resolution and high 16 9 or wider icture quality E NTSC Standard Definition TV SDTV Standard digital format that is sim ilar to the NTSC picture quality Acronym that stands for National Television Systems Committee and the name of the current ana log broadcasting standards MAINTENANCE CABINET CLEANING
27. e DTV To select the minor channel MUTE button p16 VOL A V buttons p13 To adjust volume and to change settings to move to next screen for menu items MENU button p19 To view on screen menu VOLUME A V buttons p13 To adjust volume CHANNEL A V buttons p13 To select channels POWER button To turn TV on off U DDD O MENU V VOLUME A CHANNEL A POWER Infrared Sensor Window To receive the infrared rays transmitted from the remote control W atcuine TV INITIAL SETTINGS This section describes the initial settings when you first turn on the power after purchase The initial setting items are shown below NOTE Be sure that antenna or cable is connected properly before plugging the power cord e LANGUAGE SELECTION You can select the menu language displayed on the screen among English Spanish and French s D S T Daylight Saving Time You can set the air time display for digital broad casting When you set this function to ON the date information adjusted for the area set by TIME ZONE will be adjusted to the one added by anoth er 1 hour In addition the time difference will be adjusted as follows 2 a m on first Sunday in April to 3 a m 1 hour ahead and 2 a m on last Sunday in October to 1 a m 1 hour behind s TIME ZONE The EPG information in digital broadcasting is adjusted based on the area set in TIME ZONE s AUTO PRESET CH TV DTV When using antenna The channels br
28. e TEXT1 T1 and TEXT2 T2 display half screen text by scrolling such as a channel guide schedule or announcement OPTIONAL SETTINGS NOTES e If the closed caption is not broadcasted nothing is displayed e When your TV receives a special effects playback signal i e Search Slow and Still from a VCR s video output channel CH3 or CH4 the TV may not display the correct caption or text e Captions and texts may not match the TV voice exactly e Interference may cause the closed caption system not to function properly e The caption or text characters will not be displayed while the menu display or functions display is shown e If a black box appears on the screen this means that the TV is set to TEXT mode To clear screen select CAPTION C1 C2 or OFF DTV Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 21 EN 2 Select DTV SET UP e Using CH A select DTV SET UP PICTURE CHANNEL SET ENGESP FRA V CHIP SET UP CAPTION OFF gt DTV SET UP e Press VOL A The following screen is displayed gt DTV DISPLAY LETTERBOX D S T Daylight Saving ON TIME ZONE ALASKA 3 Select DTVCC e Using CH A select DTVCC DTV DISPLAY LETTERBOX K DTVCC D S T Daylight Saving ON TIME ZONE ALASKA e Press VOL A The following scree
29. e eObe ee aed wee edd Het eve awe 11 BATTERY PRECAUTIONS 4 0 0 ceceees eed andwaweee R R R ee eed Hat R R a bae dwn BOs we N 11 PUNCTIONS a R R a babe eae eet os eee E R Pe A ee ee ee oe 12 REMOTE CONTROL AND CONTROL PANEL FUNCTION 0 00000 eee eee 12 WATCHING TV ie cc ee ee 13 INITIAL SE THINGS 52seustabewehe eee ead b eee ne ene ova er ees bee eee ee dee eee eee 13 SWITCHING ANALOG MODE DIGITAL MODE 0 000 ce ee eee 15 CHANNEL SELECTION sxcceseadetutau cea a Rew tee eed eee dee es Reh kaw ee 15 VOLUME ADJUSTMENT on cccuaiacdwew 6 baw ooh bee RRR R bene bd aw od ow ed bebe d aw eed 16 SWITCHING AUDIO ee tes we eek ts ee oe es Beton Ge ee oe Stn Oe He es ke ee ee Oe eee 16 SCREENINFORMATION lt lt lt a K a R R 505 ic6 bod RN oe A pce od Haw ee eed Oe Shee ee oR eee ees 17 SWITCHING EXTERNAL INPUT osc oe6 cei bed dee oud bate od Maw wad SES Oe Oa be a es 18 OPTIONAL SETTINGS lt lt oon te SG ee we ree th ws wae et ean Se we wae 19 SLEEP VINER sesadu sena ennan eee eee R eee DER eae ee PERE ee es Oe eae ee 19 MENU SCREEN aaea nend Oates a eee ae Be ea ewe a ER Oath ees ee oer eee ees 19 PICTURE ADJUSTMENT saranta ainikien Card oe he ee oath bes Bee eee erase eee es 20 CLOSED CAPTION ax o saena eae tac coe oS Sek Bee ee ee aa HE eek ee ee ee Oat beara es Be eae ees 21 MORIR eee ae ates Boe ek a ee se ae ee ee ee ee ee ee Be ee es 24 CHANGING THE SCREEN DISPLAY MODEL 27 OTHER SETUINGS 255 05 6 ne oe ee eee
30. e power e When no channel can be received by AUTO PRESET CH NO TV SIGNALS is displayed on the screen NO TV SIGNALS 14 EN SWITCHING ANALOG MODE DIGITAL MODE You can easily switch the TV NTSC and DTV ATSC with the remote control and enjoy viewing the High Definition TV programs as well as the Standard Definition TV programs with simple operation DTV TV C DW OOo 1 Press DTV TV on the remote control e The analog mode and digital mode switch alter nately e When you press DTV TV in external input the analog mode and digital mode will be switched NOTE When you switch the analog mode to the digital mode it may take a while until the digital channel selection is completed The following screen is displayed while switching the mode NOW SCANNING CHANNEL SELECTION You can select the channel by using either CH AY or the Number buttons How to select the channel in each way is shown below Number buttons CHANNEL RECALL ENT CH A V 100 Using CH 4 7 s Using CH A change the channel e When you press CHANNEL RECALL the previously selected channel will be selected e Same operation is available with CHANNEL A F on the front panel of the main unit 2 Using the Number buttons e When you select a channel from 1 to 99 press the channel number you want to view with the Number buttons The selected channel will be displayed e When you s
31. el programs provide a little poorer image quality than the High Definition Television HDTV programs they have such an advantage as it will not move back other programs even when a sport relay is extended PREPARATION FOR USE 11 EN Functions REMOTE CONTROL AND CONTROL PANEL FUNCTION POWER button To turn TV on off Number buttons p15 To select channels ENT button p15 To confirm the command of channel number buttons CH A buttons p13 To select channels and move up down through menu items MENU button p19 To display on screen menu INPUT SELECT button p18 To select TV or external input mode to access camcorders games etc SLEEP button p19 To turn the power off automatically at preset time AUDIO L R input jacks p10 VIDEO input jack p10 0080 12 EN AUDIO INFO CHANNEL RECALL INPUT GEND SELECT SLEEP i VIDEO L AUDIO R AUDIO button p16 s Analog mode TV To select audio mode e Digital mode DTV To select audio language DTV TV button p15 To switch between digital mode DTV and analog mode INFO button p17 s Analog mode TV To display channel No e Digital mode DTV To display channel information CHANNEL RECALL button p15 To return to previously viewed channel 100 button p15 e CATV To enter the channel number for 100 or higher channels e Digital mod
32. elect a channel larger than 100 press 100 first Then use the Number buttons to press the lower 2 digits e To search the minor channel of the major chan nel currently viewed in DTV press 100 If you know the minor channel while viewing the major channel with 1 digit channel number press the major channel number and press ENT Then press the minor channel number you want to view In case the major channel number is 2 digits press the major channel number and press the minor channel number directly If you press ENT after pressing the 2 digit major channel number the smallest minor channel will be selected e When you press CHANNEL RECALL the previously selected channel will be selected NOTE In the DTV broadcasting one channel sometimes broadcasts multiple programs depending on the air time In this case the main channel is called major channel and the sub channel is called minor channel 15 EN WATCHING TV VOLUME ADJUSTMENT This section describes how to adjust the volume when viewing TV The MUTE function which is use ful when you have a visitor or a phone call will be also described MO BD ENT HANNEL RECALL VOL A V MUTE 7 Using VOL A V e You can adjust the audio volume with VOL A V s The volume bar is displayed at the bottom of the screen when adjusting the volume e Same operation is available with VOLUME A V on the front panel
33. ghtning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the TV due to lightning and power line surges 15 POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touch ing such power lines or circuits as contact with them might be fatal 16 OVERLOADING Do not overload wall outlets and exten sion cords as this can result in a risk of fire or electric shock 17 OBJECT AND LIQUID ENTRY Never push objects of any kind into this TV through openings as they may touch dan gerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the TV 18 SERVICING Do not attempt to service this TV yourself as Opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel GROUND pe ea ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 lt GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H 19 DAMAGE REQUIRING SERVICE Unplug this TV from the wall outlet
34. ight Saving and TIME ZONE is not set you cannot select AUTO PRESET CH e Make sure if the TV is connected to antenna or cable When antenna is connected select AUTO PRESET CH TV DTV at the procedure below When connected to CATV select AUTO PRESET CH CATV Here describes the case for searching and memorizing channels for TV DTV e Using CH A select AUTO PRESET CH TV DTV 1 PLEASE CONNECT ANTENNA TO THE UNIT 2 SET UP THE ITEMS WITH AVAND Y BUTTONS D S T Daylight Saving ON TIME ZONE ALASKA gt AUTO PRESET CH TV DTV AUTO PRESET CH CATV e When you press VOL A the channel scanning in both analog and digital modes will automati cally start AUTO PRESET CH TV DTV 0 TO e When scanning is completed the lowest mem orized channel will be displayed NOTES e The initial AUTO PRESET CH function can be executed for either TV DTV or CATV only once If you want to scan both TV DTV and CATV you need to select CHANNEL SET in the MENU screen to scan and memorize other channels after initial presetting is completed Refer to page 28 e You can exit the initial AUTO PRESET menu by pressing MENU e When you press MENU while scanning the scanning is interrupted and the lowest memorized channel is displayed e If you press POWER the power will be turned off When the scanning is not completed initial AUTO PRESET CH screen is displayed every time you turn on th
35. ing station e Turn off the power and wait for about 1 minute then turn it on again No color e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condi tion and connection e Try to view other channels It may be the problem on the broadcasting station e Adjust the COLOR in the MENU screen Sound OK picture poor e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condi tion and connection e Electric waves may be interfered due to the electric appli ances etc nearby s Adjust CONTRAST and BRIGHT in the MENU screen e Try to view other channels It may be the problem on the broadcasting station Picture distorted e When the outside antenna is used check the wire condi tion and connection e Try to view other channels It may be the problem on the broadcasting station Weak picture e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condi tion and connection s Adjust CONTRAST and BRIGHT in the MENU screen e Try to view other channels It may be the problem on the broadcasting station Lines or streaks in picture e When the outside antenna is used check the wire condi tion and connection e Electric waves may be interfered due to the electric appli ances etc nearby e Try to view other channels It may be the problem on the broadcasting station
36. ion e Move the TV apart from electric appliances nearby Turn off the power and wait for about 30 minutes then turn it on again e Try to view other channels It may be the problem on the broadcasting station e Check the antenna or cable connection to the main unit e When the outside antenna is used check the wire condi tion and connection e Electric waves may be interfered due to the electric appli ances etc nearby e Try to view other channels It may be the problem on the broadcasting station e Electric waves may be interfered due to the electric appli ances etc nearby e Try to view other channels It may be the problem on the broadcasting station e Check the antenna or cable connection to the main unit e Check the battery life of the remote control e Check if there is an obstacle between the sensor and the remote control e Test the signal output If OK then possible remote sensor trouble Refer to IR SIGNAL CHECK on page 36 e Closed captioning production companies may broadcast programs without correcting the misspelling in a live broadcast e Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts Most captioning production companies can display a dialogue to a maximum of 220 words per minute If a dialogue exceeds that rate selective editing is used to insure that the captions remain up to date with the current TV screen dialogue e When electri
37. itched as below MIDDLE LARGE T SMALL FONT STYLE Font style of the displayed caption can be switched as below STYLE1 8 STYLE2 8 STYLE3 8 STYLE4 8 STYLE5 8 STYLE6 8 a STYLE8 8 CHARACTER EDGE Text edging of the displayed caption can be switched as below NONE RAISED DEPRESSED UNIFORM SHADOW LEFT SHADOW RIGHT FORE OPACITY Text opacity of the displayed caption can be switched as below SOLID TRANSLUCENT FLASH FORE COLOR Text color of the displayed caption can be switched as below TRANSPARENT m ITE BLACKI RED GREEN ee EELO MAGENTA CYAN BACK OPACITY OPTIONAL SETTINGS Background opacity of the displayed caption can be switched as below SOLID TRANSLUCENT FLASH BACK COLOR Background color of the displayed caption can be switched as below TRANSPARENT d ITE BLACKI m GREEN tie a a MAGENTA CYAN 23 EN V CHIP You can set the viewing limitations to prevent your children from watching inappropriate programs including disagreeable expression and description The viewing limitations set for the program can be released by entering the access code Number buttons Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 2 Select
38. ith fresh ones e If the device is not to be used for a long period of time remove the batteries to prevent damage or injury from possible battery leakage e Do not try to recharge batteries not intended to be recharged they can overheat and rupture Features of digital broadcasting Digital broadcasting uses the newest broadcasting technology such as compression of audio and video signals and provides much more improved image and sound quality than analog broadcasting For image quality digital broadcasting have realized the High Definition Television HDTV that can display sharper and finer images than Standard Definition Television SDTV with double scanning lines and can adopt the 16 9 wide screen format that fits more to range of human vision For audio quality digital broadcasting offers the multi channel surround broadcast to give you the feeling of being at a stadium or a theater In addition digital broadcasting enables to broadcast 2 or 3 programs of Standard Definition Television SDTV which is the analog television format at the same time by 1 channel This feature has made the program planning more diversified In addition digital broadcasting has overcome problems experienced with analog television such as ghosting or interference with digital technology Minor channel of digital broadcasting In digital broadcasting the selected channel can have the sub channel It is called the minor channel Though the minor chann
39. n display or CAPTION in the DTV mode Refer to CHANGING THE SCREEN DISPLAY MODE on page 27 NOTES e DTV SET UP can be displayed only in the DTV mode e To move to the normal screen press MENU WATCHING TV OPTIONAL SETTINGS 19 EN PICTURE ADJUSTMENT You can adjust the brightness contrast color tint and sharpness of the picture OM Ww VOL A V Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGJESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 2 Select PICTURE e Using CH A V select PICTURE and press VOL A to confirm gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP e The adjustment bar for picture quality item is displayed in the screen BRIGHT H UU 20 EN 3 Adjust the picture quality e Using CH A select the picture quality item you want to adjust saa sid CON and at ON TINT 3 SHARPNESS e Using VOL A V adjust the picture quality BRIGHT A To increase brightness V To decrease brightness CONTRAST A To increase contrast V To decrease contrast COLOR A To brilliant V To pale TINT A To green V To purple SHARPNESS A To clear V To soft NOTES e The display will disappear automatically after 10 seconds unless you press a button e Magnetism from nearby appliances and speakers might affect the c
40. n is displayed gt CAPTION SERVICE OFF USERSETTING OFF CAPTION SIZE MIDDLE FONT STYLE STYLE1 8 CHARACTER EDGE NONE FOREOPACITY SOLID FORECOLOR WHITE BACK OPACITY SOLID BACKCOLOR BLACK 4 Select CAPTION SERVICE e When you press VOL A V you can switch CAPTION as below Select CAPTION SERVICE you want to use OFF erin 16 ae 2 E2 6 m2 E4 6 a a SERVICE6 6 22 EN NOTE CAPTION SERVICE you can switch differs depending on the broadcast description 5 Use USER SETTING e The USER SETTING function lets you change the caption size and font style e Using CH A V select USER SETTING CAPTION SERVICE SERVICE1 6 gt USER SETTING OFF CAPTION SIZE MIDDLE FONT STYLE STYLE1 8 CHARACTER EDGE NONE FORE OPACITY SOLID FORECOLOR WHITE BACK OPACITY SOLID BACKCOLOR BLACK e Press VOL A and set USER SETTING to ON 6 Set each item e When USER SETTING is set to ON you can set the following items K CAPTION SERVICE SERVICE1 6 USER SETTING ON CAPTION SIZE MIDDLE FONT STYLE STYLE1 8 CHARACTER EDGE NONE FORE OPACITY SOLID FORECOLOR WHITE BACK OPACITY SOLID BACK COLOR BLACK e Using CH A V select the item you want to set e You can switch the setting for each item with VOL A V e The setting description for each item is shown below CAPTION SIZE Text size of the displayed caption can be sw
41. nd used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND A NOTE ABOUT RECYCLING This product s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding
42. ng one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try revers ing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 12 POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying par ticular attention to cords at plugs convenience recepta cles and the point where they exit from the appliance FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ELECTRIC SERVICE EQUIPMENT NEC NATIONAL ELECTRICAL CODE S2898A 13 OUTDOOR ANTENNA GROUNDING If an outside anten na or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna dis charge unit connection to grounding electrodes and requirements for the grounding electrode Fig A 14 LIGHTNING For added protection for this TV receiver dur ing a li
43. oadcasted in TV and DTV are automatically scanned and memorized Only the receivable channels in the area where this TV is used will be memorized s AUTO PRESET CH CATV When using basic cable The channels broadcasted in CATV are automati cally scanned and memorized D OOO D00 ENT CH A V VOL A V 2 Using VOL A V set D S T Daylight Saving Select your language When you first turn on the power the following screen is displayed SELECT LANGUAGE ENGLISH NEXT PRESS 4 ESPANOL DESPUES PRESIONE Y FRAN AIS APRES PRESSEZ A e At initial language screen press CH A for English press CH Y for Spanish press VOL A for French The next menu will be displayed in the selected language after you press the button FUNCTIONS WATCHING TV to ON 1 PLEASE CONNECT ANTENNA TO THE UNIT 2 SET UP THE ITEMS WITH AV ANDY BUTTONS gt D S T Daylight Saving ON TIME ZONE AUTO PRESET CH TV DTV AUTO PRESET CH CATV 3 Using CH A F select TIME ZONE 1 PLEASE CONNECT ANTENNA TO THE UNIT 2 SET UP THE ITEMS WITH AV ANDY BUTTONS K TIMEZONE AUTO PRESET CH TV DTV AUTO PRESET CH CATV D S T Daylight Saving ON L e Every time you press VOL A V the area will be switched as below ALASKA Hawa aint ais PACIFIC EASTERN MOUNTAIN lt CENTRAL e Set your area 13 EN 4 Set the AUTO PRESET CH NOTES e If D S T Dayl
44. of the main unit VOLUME DI TI 2 Using MUTE e Press MUTE on the remote control to mute the sound The colored volume bar is displayed on the screen while muting VOLUME TL e To release the MUTE status press MUTE again or press VOL A V 16 EN SWITCHING AUDIO This section describes how to switch the audio in the analog mode and how to switch the audio lan guage in the digital mode MW 7 FRYVF9Y 1 Switch the audio e Every time you press AUDIO the audio will be switched as below MAIN l SAP 4 MONO MAIN Outputs main audio SAP Outputs second audio channel MONO Outputs mono audio DTV Switch the audio language e When you press AUDIO the currently selected language and the number of received languages will be displayed on the screen Audio language e Every time you press AUDIO the language will be switched o e Languages you can switch differ depending on the receiving broadcast NOTE If you press AUDIO in external input the audio will not be switched SCREEN INFORMATION You can display the currently selected channel number or other information such as the audio mode on the screen for checking MD INFO OM W W D 1 1 In the analog mode the currently selected channel number and the audio mode are displayed Display the channel number and the audio mode e Press INFO on the remote control The curren
45. olor of the TV picture If this happens press POWER to turn off the TV and turn it on again after about 30 minutes CLOSED CAPTION You can view specially labeled cc TV programs movies news and prerecorded tapes etc with either a dialogue caption or text display added to the program You can also change the font size and font style of the caption in the digital broadcasting VOL A V Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 2 Select CAPTION e Using CH A V select CAPTION PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP gt CAPTION OFF DTV SET UP 3 Switch the CAPTION mode e When you press VOL A V CAPTION will be switched as below oe T2 C1 t t mmi C2 CAPTION MODE C1 C2 e CAPTION C1 Displays standard closed captions what a char acter is saying 4 To exit the menu press MENU e CAPTION2 C2 Displays foreign language closed captions for eign language words showing what a character is saying e There are three display modes according to programs Paint on mode Displays input characters on the screen immediately Pop on mode Once characters are stored in memory they are displayed all at once Roll up mode Displays the characters continu ously by scrolling max 4 lines TEXT MODE T1 T2
46. on your home outlet to the ANT IN jack of this TV 2 When connecting TV to basic cable without box Connect the coaxial cable on your home outlet to the ANT IN jack of this TV VHF UHF antenna 6 YT KQ Coaxial cable not included eeeeede080 Coaxial cable Cable TV not included company Once connections are completed turn on the TV and begin initial setup Rear of this TV Channel scanning is necessary for the TV to memorize all available channels in your area Refer to INITIAL SETTINGS on page 13 NOTES e For your safety and to avoid damages to the unit unplug the coaxial cable from the ANT IN jack before moving the unit e If you use an antenna in order to receive analog TV the same antenna generally will work for DTV reception Outdoor or attic antennas will be more effective than set top versions e Some cable channels cannot be viewed when the TV is connected to an aerial antenna because DTV program does not cover all cable channels You can watch them by switching to the cable connected to CATV e To easily switch between antenna and cable wires you can purchase an Antenna Selector commercially available EN CONTENTS PREPARATION FOR USE CONNECTION TO CABLE SATELLITE BOX 1 Connect the coaxial cable on your home outle
47. r information in the Closed Caption supported programs e MTS SAP Tuner This feature allows you to select with the remote control your desired audio language s Auto Shut Off Function The power of the unit is automatically turned off when there has been no signal and no key input for more than 15 minutes e Sleep Timer This feature will automatically turn off the power of the unit at a specific time e On Screen Function Display ENGLISH SPANISH FRENCH This feature lets you select the language displayed in the MENU screen from ENGLISH SPANISH or FRENCH e Stereo Sound Function s Full Function Remote Control e PLL Frequency Synthesized Tuning e Flat Screen Picture Tube s S VIDEO Input e Front Rear AV Input s Component VIDEO Input s Rear Digital Audio Output 2007 Funai Electric Co Ltd All rights reserved No part of this manual may be reproduced copied transmitted disseminated tran scribed downloaded or stored in any storage medium in any form or for any purpose without the express prior written consent of Funai Furthermore any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited Information in this document is subject to change without notice Funai reserves the right to change the con tent herein without the obligation to notify any person or organization of such changes FUNAI with 3 is a registered trademark of Funai Electric Co Ltd and may not be used in any w
48. s out the infrared sig nal with AM radio or a digital camera including built in camera of cellular phone It will help to define the cause of malfunction e With an AM radio Tune an AM radio to a station with no broadcasting Press a a button on remote control toward ER the radio Sound will be fluttering a when you press any key and the radio receives the signal This means the remote control unit is working e With a digital camera including built in camera of cellular phone Direct a digital camera to remote con trol press and hold a button on remote control If infrared light appears through digital camera the remote control is working Specirications GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Television system ATSC Sound output NTSC M TV Standard QW 8 ohm x 2 Closed Caption OTHER SPECIFICATIONS System 15 119 FCC Analog CC e Remote control 15 122 FCC Digital CC Channel coverage Operating VHF 2 13 temperature UHF 14 69 DIV 2 69 Power requirements CATV 2 13 A W Power consumption W 1 W 84 Maximum l A 5 A 1 5A Picture tube Tuning System Channel frequency Dimensions synthesized tuning system Channel access Direct access keyboard programmable Weight scan and up down Terminals Antenna input VHF UHF DTV CATV 75 ohm unbalanced F type S Video input Mini DIN 4 pin jack Video input RCA connec
49. ss VOL A and set to BLOCK or VIEW VIEW BLOCK VIEW VIEW BLOCK VIEW BLOCK VIEW BLOCK VIEW BLOCK Sub categories lt Selection gt e TV Y7 FV Fantasy Violence e TV PG TV 14 TV MA D Suggestive Dialogue TV PG TV 14 only Coarse Language Sexual Situation Violence lt Rating Category Explanations gt NOTES e You cannot access the setup menu when the PROTECTED PROGRAM by message appears You need to move to an unblocked channel to access the setup menu e When you select a rating and set it to BLOCK the higher ratings will be blocked automatically The lower ratings will be available for viewing e When you set TV MA to VIEW all ratings turn to VIEW automatically 7 To exit the menu press MENU MPAA RATING 4 Display the MPAA RATING screen e Using CH A V select MPAA RATING e Press VOL A TV RATING gt MPAA RATING CHANGE CODE 5 Set MPAA RATING e Using the CH A select the rating VIEW VIEW VIEW VIEW VIEW VIEW lt Selection gt lt Rating Category Explanations gt General Audience Parental Guidance suggested Unsuitable for children under 13 Restricted under 17 requires accompanying parent or adult guardian e NC 17 No one under 17 admitted eX Mature audience only eG e PG s PG 13 eR 6 Set BLOCK or VIEW e Press VOL A and set to BLOCK or VIEW VIEW VIEW VIEW BLOC
50. t to the input jack of the CABLE SATELLITE box 2 Use the coaxial cable to connect the ANT IN jack of this TV and the output jack of the CABLE SATELLITE box Required cables in 2 and connecting methods differ depending on the CABLE SATELLITE box For more information please contact the store where you purchased the CABLE SATELLITE box or nearby electric appliance stores EX Satellite a Cable box or Satellite box Rear of this TV SE eos Q O i i LST T Cable TV Coaxial cable Lon out Coaxial cable ANTIN Bs company not included not included If you connect a cable system directly contact the CATV installer COMPONENT CONNECTION This is the best method to connect this TV to video devices with the component output jack such as a DVD player etc It can minimize the deterioration of image quality Use the component cable not included for connection Component video cable not included To component video output jacks To COMPONENT INPUT jacks COMPONENT VIDEO OUT DIGITAL AUDIO OUTPUT o L DVD Player with the component video output jacks COMPONENT INPUT Rear of this TV To audio output jacks To AUDIO INPUT jacks Audio cable not included NOTE This TV can only accept a 480i
51. tly selected channel number and the audio mode are displayed at the top right of the screen CH 10 STEREO e To clear the display press INFO again e The following screens are displayed when con necting to external devices 1 When using video cable for connection VIDEO 2 2 When using component video cable for con nection COMPONENT DTV In the digital mode the detailed information for the currently selected channel such as the program guide is displayed Display the detailed information for the channel e Every time you press INFO the display mode will be switched as below gt DISPLAY OFF l Z INFO1 T 1 O INFO2 lt x e The following information is displayed in the INFO1 mode 1 Channel number 2 Channel title 3 Program title max 2 lines displayed 4 Audio language OTHER is displayed when the audio language cannot be acquired or the acquired languages are other than ENG LISH SPANISH or FRENCH 5 Program air time 2 1 3 5 4 e The program guide added to the displayed information in the INFO1 mode is displayed in the INFO2 mode Program guide NOTES e When the program guide is displayed in more than 6 lines use VOL A V and scroll for reading e No description provided is displayed when the program guide is not provided e While the information is displayed in the INFO2 mode the CLOSED CAPTION function is interrupted 17 EN SWITC
52. tor x 2 1 x Front 1 x Rear Audio input RCA connector x 4 2 L R x Front 2 L R x Rear Coaxial digital audio output One pin jack 500mVpp 75 ohm Component Video Audio input One pin jack Y 1Vpp 75 ohm Two pin jacks Cb Cr 700mVpp 75 ohm RCA connector x 2 L R Stereo Sound System 2 speakers Digital encoded infrared light system 5 C to 40 C 41 F to 104 F AC120V 60Hz 140W 32 H 26 2 665mm W 33 4 849mm D 21 3 540mm 112 6 Ibs 51 0kg e Designs and specifications are subject to change without notice and without our legal obligation e If there is a discrepancy between languages the default language will be English MISCELLANEOUS SPECIFICATIONS 37 EN ilo LIMITED WARRANTY FUNAI CORP will repair this product free of charge in the USA in the event of defect in materials or workmanship as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year from the date of original retail purchase Two 2 years for Picture Tube Certain parts are excluded from this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UND
53. you set this function to ON the clock will automatically move forward one hour at 2 00 a m on the first Sunday in April and move back one hour at 2 00 a m on the last Sunday in October ENT RECALL DTV Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF DTV SET UP 2 Select DTV SET UP e Using CH 4 select DTV SET UP PICTURE CHANNEL SET ENGESP FRA V CHIP SET UP CAPTION OFF gt DTV SET UP e When you press VOL A the following menu screen will be displayed gt DTV DISPLAY LETTERBOX DTVCC D S T Daylight Saving OFF TIME ZONE ALASKA 32 EN 3 Select D S T Daylight Saving e Using CH A V select D S T Daylight Saving DTV DISPLAY LETTERBOX DTVCC gt D S T Daylight Saving OFF TIME ZONE ALASKA 4 Set D S T Daylight Saving e Using VOL A V set to ON or OFF DTV DISPLAY LETTERBOX DTVCC gt D S T Daylight Saving ON TIME ZONE ALASKA 5 To exit the menu press MENU NOTE When you set D S T to OFF the date and time information adjusted for the area set by TIME ZONE is displayed TIME ZONE 3 Select TIME ZONE If you move the TV to a different area after the ini e Using CH 4 V select TIME ZONE tial setting you set when you first turned on the power you can set the area again
54. zes them even if you switch wires OM e Make sure if the TV is connected to antenna or cable When aerial antenna is connected select AUTO PRE SET CH TV or AUTO PRESET CH TV DTV at step 4 When connected to CATV select AUTO PRESET CH CATV When scanning TV or CATV Select analog mode by pressing DTV TV 2 Display the menu screen e Press MENU The following menu screen is displayed gt PICTURE CHANNEL SET ENGESP FRA V CHIP SET UP CAPTION OFF 3 Select CHANNEL SET e Using CH A F select CHANNEL SET PICTURE gt CHANNEL SET ENGVESP FRA V CHIP SET UP CAPTION OFF e Press VOL A 28 EN 4 For TV channels e Using CH A V select AUTO PRESET CH TV ADD DELETE gt AUTO PRESET CH TV AUTO PRESET CH CATV AUTO PRESET CH TV DTV AUTO PRESET CH CATV CATV takes approx 50min e Press VOL A Scanning and memorizing the channels auto matically starts AUTO PRESET CH TV UID e When the scanning and memorizing are com pleted the lowest memorized channel in the analog broadcasting will be displayed 4 For CATV channels e Using CH A V select AUTO PRESET CH CATV ADD DELETE AUTO PRESET CH TV gt AUTO PRESET CH CATV AUTO PRESET CH TV DTV AUTO PRESET CH CATV CATV takes approx 50min e Press VOL A Scanning and memorizing the channels auto matically starts AUTO PRESET CH CATV HIH III

FUNAI CR320IL8 CRT Television User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents