Bryant P/N TSTATBBP220-01 Thermostat User Manual
Contents
1. YEAR WARRANTY This Bryant Heating amp Cooling Systems herein after referred to as Bryant product is warranted to be free from defects in material and workmanship under normal use and maintenance for a period of one year from the date of original installation whether or not actual use begins on that date A new or remanufactured part at Bryant s sole option to replace any defective part will be provided without charge for the part itself PROVIDED the defective part is returned to our distributor through a qualified servicing dealer The replacement part assumes the unused portion of the warranty THIS WARRANTY DOES NOT INCLUDE LABOR OR OTHER COSTS incurred for diagnosing repairing removing installing shipping servicing or handling of either defective parts or replacement parts Such costs may be covered by a separate warranty provided by the installer THIS WARRANTY APPLIES ONLY TO PRODUCTS IN THEIR ORIGINAL INSTALLATION LOCATION AND BECOMES VOID UPON REINSTALLATION LIMITATIONS OF WARRANTIES ALL IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH THE LIMITED WARRANTY IS GIVEN SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE MAY NOT APPLY TO YOU THE EXPRESSED WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED ENLARGED OR CHANGED BY ANY DISTRIBUTOR DEALER OR OTHER PERSON WHATSOEVER ALL WORK2. for the time chosen When the correct time is shown press the Mode button to modify the day of the week The current day will blink on and off Press the UP ARROW and DOWN ARROW buttons until the correct day is shown Press the Set Clock button again to exit the Set Time mode Gan L Fig 4 Setting the Clock VI PROGRAMMING THERMOSTAT SCHEDULES Before programming thethermostat plan thethermostat daily schedule The schedule is divided into 7 days Monday through Sunday Each day can have 2 Occupied 1 Unoccupied 3 Occupied 1 Occupied 2 Unoccupied or 4 Occupied 1 Occupied 2 Occupied 3 Unoccupied time periods Each occupied time period has a start time stop time heating set point and a cooling set point The unoccupied time period has a heating set point and a cooling set point The unoccupied time period is active whenever an occupied time period is not active Fill in Table 1 below as an aid to programming the daily schedules A Programming Mode To program the daily schedules perform the following procedure 1 Enter programming mode by pressing the Program but ton The Occupied 1 annunciator will appear on thether mostat display See Fig 5 Use the UP ARROW and DOWN ARROW buttons to set the maximum number of Occupied periods available The thermostat can be set to 1 2 or 3 After the number of Occupied periods has been selected press the M ode button 2 The cooling set point for Occupied 1 wi
3. is shown 7 The Start Time for Occupied 1 will be displayed Use the UP ARROW and DOWN ARROW buttons to raise or lower the time until the desired Start Time is shown Press the Mode button to continue See Fig 6 Jam j M Start occupied 1 Fig 6 Start Time Display 8 The Stop Time for Occupied 1 will be displayed Use the UP ARROW and DOWN ARROW buttons to raise or lower the time until the desired Stop Time is shown Press the Mode button 9 The On Off icon will be displayed Use the UP ARROW to turn the Occupied 1 period ON for this day Use the DOWN ARROW to turn the Occupied 1 period OFF for this day Repeat Steps 2 through 9 to program the remain ing schedule for occupied periods 2 and 3 if selected in Step 1 Table 1 Daily Schedule Planner DAY SCHEDULE WEEK NOTE The cooling temperature set point must be higher than the heating temperature set point 11 The Copy command can be used to copy the previous day s schedule if the schedules are the same The copy command becomes available after all the occupied periods are programmed in a day Use the UP ARROW to change the copy command to YES Use the DOWN ARROW to change the copy command to NO Press the Mode button when the choice has been made See Fig 7 If NO was selected the schedule will automatically change to the next day and the user must enter the oc cupied and unoccupied schedules for that day NOTE Occupied 1 schedule hea
4. ICATOR _ Fan On ED Gp ODO HEATING FAN SET POINT OPERATION ROOM TEMPERATURE Fig 1 Thermostat Display ll HEAT OR COOL INDICATOR A Heat or Cool indicator is located on the bottom left cover of the thermostat See Fig 2 The light will be red if the ther mostat is in Heating mode The light will be green if the ther mostat is in Cooling mode II THERMOSTAT FRONT PANEL BUTTONS Thethermostat has buttons on the front cover which are used to raise or lower the desired set point and override the cur rent program See Fig 2 A Set Point Buttons The UP ARROW and DOWN ARROW buttons will raise or lower the current desired temperature set point If the ther mostat is in AUTO mode pressing the UP ARROW or DOWN ARROW buttons will adjust both the heating and cooling set points Pressing the UP ARROW or DOWN ARROW buttons in Cooling mode will adjust only the cooling set points Press ing the UP ARROW or DOWN ARROW buttons in Heating mode will adjust only the heating set points The UP ARROW and DOWN ARROW buttons are also used in Pro gramming mode B Override Button The Override button is used to force the thermostat from Un occupied mode into the Occupied 1 mode comfort settings The Override period will be set at 30 minutes The thermostat will then return to Unoccupied mode To increase the amount of time in Override mode press the Override button again Thirty minutes of override time will be added for each time t
5. UNDER THE TERMS OF THIS WARRANTY SHALL BE PERFORMED DURING NORMALWORKING HOURS ALL REPLACEMENT PARTS WHETHER NEW OR REMANUFACTURED ASSUME AS THEIR WARRANTY PERIOD ONLY THE REMAINING TIME PERIOD OF THIS WARRANTY BRYANT WILL NOT BE RESPONSIBLE FOR 1 Normal maintenance as outlined in the installation and servicing instructions or owners manual including coil cleaning filter cleaning and or replacement and lubrication Damage or repairs required as a consequence of faulty installation misapplication abuse improper servicing unauthorized alteration or improper operation Failure to start due to voltage conditions blown fuses open circuit breakers or other damages due to the inadequacy or interruption of electrical service Damage as a result of floods winds fires lightning accidents corrosive environments or other conditions beyond the control of Bryant Parts not supplied or designated by Bryant or damages resulting from their use Bryant products installed outside the continental U S A Alaska Hawaii and Canada Electricity or fuel costs or increases in electricity or fuel costs from any reason whatsoever including additional or unusual use of supplemental electric heat ANY SPECIAL INDIRECT OR CONSEQUENTIAL PROPERTY OR COMMER CIAL DAMAGE OF ANY NATURE WHATSOEVER Some states do not allow the exclusion of incidental or consequential damages so the above limitation may not apply to you This warr
6. anty gives you specific legal rights and you may also have other rights which vary from state to state CATALOG NO 13TS TA2 Effective on products manufactured after January 1997 Supersedes any other warranty certificates supplied with the product 39004DP 164 Copyright 1998 Bryant Heating amp Cooling Systems Printed in U S A CATALOG NO 809 696
7. he Override button is pressed up to a maximum of 4 hours After the 4 hour limit has been reached press the Override button again to cancel Override mode While in Override mode the Override icon and the Occupied 1 icon will be displayed on the thermostat The time of day and the minutes remaining in Override mode will alternate on the thermostat display The set points are adjustable with the UP ARROW and DOWN ARROW keys during Override mode NOTE If the thermostat is in Occupied mode and the Over ride button is pressed the thermostat will go into Unoccu pied mode immediately The thermostat will remain in Un occupied mode until the next Occupied start time IV THERMOSTAT PROGRAMMING BUTTONS The thermostat has programming buttons which are used to change the set points of the thermostat set the modes and program schedules The programming buttons are acces sible from underneath the thermostat cover To access the pro gramming buttons pull on the hinged thermostat cover See Fig 3 The programming buttons are Mode Fan Holiday Program and Set Clock The UP ARROW and DOWN ARROW buttons are used to scroll through programming set points The buttons are also used to answer yes or no A Keypad Lock The thermostat has a keypad lockout feature which will not acknowledge front panel buttons until the lockout sequence IS entered To disable or lock the keypad press and hold the Mode button While holding down the Mode bu
8. hours without external power or batteries IV FAN OPERATION If Fan On is selected the fan will run continuously during occupied schedule except when Mode is switched to OFF The fan will be off during unoccupied schedule except during heating or cooling operation If Fan On ts not selected the fan will only operate during heating or cooling operation V EMERGENCY HEAT Emergency heat is available for heat pump applications To turn on emergency heat press and hold the Fan button While holding the Fan button press the UP button for 2 seconds An EH will be displayed During emergency heat the fan will operate and the second stage of heat will be energized locking out the first stage compressor To exit emergency heat press and hold the Fan button While holding the Fan button press the UP button for 2 seconds During emergency heat only OFF and HEAT modes are available VI ELECTRIC HEAT When the Electric Heat option in the advanced set up is set to ON configured by installer the thermostat will turn on the fan immediately any time there is a heat demand This feature should only be used on electric heating applications Do not use with gas heat Vil HOLIDAY MODE When the thermostat is in Holiday mode the thermostat will operate under Unoccupied set points To configure and acti vate the Holiday mode press the Holiday button The HOL icon will be displayed along with the remaining days of Holi da
9. led time period starts OPERATION The Mode button selects the operating mode of the thermo stat If OFF is selected the thermostat will not enter Heat ing or Cooling mode If HEAT is selected the thermostat will only enter Heating mode if the room temperature is below the heating set point If COOL is selected the thermostat will only enter Cooling mode if the room temperature is above the cooling set point lf AUTO is selected the thermostat will enter Heating or Cooling mode based on the room tempera ture and the heating and cooling set points If PROGRAM ON is selected the stored schedule is enabled and the ther mostat will follow the Occupied and Unoccupied schedules stored in its memory I AUTO CHANGEOVER When the thermostat mode is set to AUTO the thermo stat will provide automatic changeover from H eating to Cool ing mode and Cooling to Heating mode when required The thermostat will automatically switch to maintain the desired temperature setting The thermostat does not need to be manu ally changed from heating to cooling or cooling to heating operation ll TWO STAGE OPERATION The second stage of heat or cool is turned on when the first Stage has been on for a minimum of 2 minutes and the tem perature differential from the set point is equal to or greater than the set point plus the deadband plus 2 degrees lll CLOCK BACKUP In the event of a power loss the thermostat will keep time for a minimum of 48
10. ll be displayed Use the UP ARROW and DOWN ARROW buttons to raise or lower the cooling set point until the desired temperature is shown The range of acceptable values is 35 to 99 F 1 to 37 C Press the Mode button to con tinue See Fig 5 3 The heating set point for Occupied 1 will be displayed Use the UP ARROW and DOWN ARROW buttons to raise or lower the heating set point until the desired temperature is shown The range of acceptable values is 35 to 99 F 1 to 37 C Press the Mode button to con tinue See Fig 5 10 occupied 1 Fig 5 Setting Occupied 1 Set Points 4 The cooling set point for Unoccupied will be displayed Use the UP ARROW and DOWN ARROW buttons to raise or lower the cooling set point until the desired temperature is shown The range of acceptable values IS 35 to 99 F 1 to 37 C or OF no unoccupied cool ing Press the Mode button to continue 5 The heating set point for Unoccupied will be dis played U se the UP ARROW and DOWN ARROW but tons to raise or lower the heating set point until the desired temperature is shown The range of acceptable values is 35 to 99 F 1 to 37 C or OF no unoccupied heating Press the Mode button to continue 6 The day of the week will be shown Use the UP ARROW and DOWN ARROW buttons to change the day of the week until the desired starting day is shown Possible choices are M Monday through S Sunday Press the Mode button when the desired day
11. re not required During power interruption the internal NEVERLOST memory stores programs for an unlimited time IMPORTANT Thethermostat has a configurable security level If certain functions are not available changing set points chang ing programming schedules the thermostat security level may be configured to exclude those functions Call the installer to reconfigure the security level OM TSTAT 6 11 1 98 Cancels New CONFIGURATION I THERMOSTAT DISPLAY The thermostat display is located in the center of the ther mostat See Fig 1 The following information can be dis played on the screen e mode OFF HEAT COOL AUTO or PROGRAM ON e fan setting FAN ON or blank e override indication e room temperature e desired temperature e service filter indicator e time of day e day of the week e schedule period Occupied 1 2 or 3 or Unoccupied e setup indicator programming mode e lock indicator e start stop indicator Schedule period program mode PROGRAM ON MODE SETUP MODE INDICATOR INDICATOR START STOP OCCUPIED TIMES PROGRAMMING SECURITY UNOCCUPIED INDICATOR INDICATOR MODE INDICATOR CLOCK ons 51 COOLING DAY OF Uan rogramOn Setup zu 4 SET POINT THE WEEK Te Pm StopStart a fa H COOLING W I unoccupie SERVICE piten SMIWIES E gan O COOL MODE INDICATOR INDICATOR AUTO Override _ OVERRIDE AUTO MODE OFF MODE INDICATOR INDICATOR GE ES HEAT ST HEATING OFF MODE 69 9 MODE INDICATOR IND
12. thermostat will enter Heating or Cooling mode based on the room tempera ture and the heating and cooling set points If PROGRAM ON is selected the stored schedule is enabled and the ther mostat will follow the Occupied and Unoccupied schedules stored in its memory Auto Changeover When the thermostat mode is set to AUTO the thermo stat will provide automatic changeover from H eating to Cool ing mode and Cooling to Heating mode when required The thermostat will automatically switch to maintain the desired temperature setting The thermostat does not need to be manu ally changed from heating to cooling or cooling to heating operation D Holiday Mode The Holiday button places the thermostat into Holiday mode During Holiday mode the unoccupied set points are enforced The number of days the thermostat will be in Holi day mode can be set V SET CLOCK The Set Clock button allows the user to change the time and day displayed on the thermostat Press the Set Clock button to enter Set Time mode See Fig 4 The current time will blink on and off Press the UP ARROW and DOWN ARROW buttons until the correct time is shown Hold down the but tons to quickly move through the time display The AM and PM annunciators will automatically change To scroll through by hours only press and hold down the Fan button while press ingthe UP or DOWN ARROW buttons To ensure the sched ules are properly followed make sure that AM or PM is correct
13. ting and cooling set points are the same for each day Occupied 2 and 3 set points may be set to different values for each day of the week If YES was selected the schedule will be copied to the next day The schedule copy may be repeated until Sun day is reached The Sunday schedule cannot be copied to Monday Fig 7 Copy Command Display 12 After all the times and set points for each day have been entered press the Program button to finish en tering the schedule NOTE The thermostat will continue to follow the schedule until a new one is entered If only one occupied schedule is selected the Occupied 2 and 3 schedules are skipped If the start time is set later in the day than the stop time the program will run from midnight of that day to the stop time and then from the start time to midnight If the same start and stop times are programmed for an occupancy schedule the thermostat will bein Occupied mode for 24 hours If one occupied period starts or stops within another occu pied period the lower numbered schedule has priority For example if schedule Occupied 3 is running for 24 hours and occupied schedule 2 comes on from 1 to 3 PM the set points from Occupied 2 are in effect from 1 to 3 PM B Overriding the Schedule The schedule can be overridden during operation by pressing the UP or DOWN ARROW buttons to change the desired tem perature The thermostat will use the new set point until the next schedu
14. tton press the UP and DOWN ARROW buttons simultaneously The Locked icon will appear on the display The thermostat is unlocked by performing the same proce dure Press and hold the Mode button While holding down the Mode button press the Up and Down Arrow buttons simultaneously The Locked icon will be removed from the display B Fan Button Operation The Fan button selects fan operation When the fan is set to FAN ON the fan will run continuously for improved air circulation BACKLIT LCD DISPLAY WARMER OR BUTTON COOLER OR BUTTON OVERRIDE BUTTON HEAT OR COOL INDICATOR Red Heat Green Cool FAN PROGRAM Fig 3 Thermostat Programming Buttons NOTE When the thermostat is in Unoccupied mode the fan will run only during heating or cooling operation even if the fan is set to FAN ON this is the energy saving smart fan feature When the fan is not setto FAN ON noicon displayed on ther mostat screen the fan will run during heating and cooling operation only C Mode Button Operation The Mode button selects the operating mode of the thermo stat If OFF is selected the thermostat will not enter Heat ing or Cooling mode If HEAT is selected the thermostat will only enter Heating mode if the room temperature is below the heating set point If COOL is selected the thermostat will only enter Cooling mode if the room temperature is above the cooling set point If AUTO is selected the
15. user s information METE TEMPSURE COMMERCIAL PROGRAMMABLE THERMOSTAT P N TSTATBBP220 01 CONTENTS Page GENERAL a 234444 2 id ee de io 1 CONFIGURATION 000s cee eens 1 4 I Thermostat Display 1 ll Heat or Cool Indicator 1 lll Thermostat Front Panel Buttons 2 IV Thermostat Programming Buttons 2 Ve SOOT AA ae laos ar en 3 VI Programming Thermostat Schedules 3 OPERATION sesdraatoriatolcalrier isa tee gaye ae 5 I Auto Changeover 222220 nee 5 ll Two Stage Operation 5 lll Clock Backup 0 o oooooommoo 5 IV Fan Operation iia aaa ala 5 V Emergency Heat 5 Vi El ctric Heat 53 2 Set se ee hehe 5 Vil Holiday Mode o oooooo 5 IMPORTANT Read entire instructions before starting the installation GENERAL Bryant s 7 day commercial programmable thermostats are wall mounted low voltage thermostats which maintain room temperature by controlling the operation of an HVAC heat Ing ventilation and air conditioning system Separate heat Ing and cooling set points and auto changeover capability allow occupied and unoccupied programming schedules for energy savings All thermostats allow up to 3 occupied and one unoccupied time temperature setting to be programmed per 24 hour period Each thermostat stores programs for 7 independent days Batteries a
16. y mode operation Press the UP or DOWN ARROWS to select the number of days that the holiday schedule will bein effect A value of O disables Holiday mode The duration can be set from 1 to 99 days The thermostat will enter Holiday mode on midnight of the next day after the mode has been activated Holiday mode will remain in effect until midnight of the last configured day If the Holiday mode is in effect the number of days remain ing will blink on and off and the Unoccupied icon will be displayed The Override button will be active during Holiday mode To turn off the Holiday mode before the remaining config ured days have passed press the Holiday button to enter the configuration mode Press the DOWN ARROW to set the num ber of days to zero Holiday mode will be disabled FIRST is a new residence SECOND THIRD Contact P O Box 4952 Phone 1 800 428 4326 Model No Date of Installation Name of Owner ANNO N Bryant Heating amp Cooling Systems FOR SERVICE OR REPAIR FOLLOW THESE STEPS IN ORDER Contact the installer If his name is not known call your builder if yours Contact the nearest distributor See telephone yellow pages BRYANT HEATING amp COOLING SYSTEMS Consumer Relations Department Syracuse New York 13221 4952 PIRATAS laa a O Ae raros Unit Serial No Installed by Address of Installation AI rn Y THERMOSTAT PRODUCTS LIMITED WARRANTY ONE
Download Pdf Manuals
Related Search