Zanussi ZWF 3100 User manual
Contents
1. M9604 To cancel the running wash programme and to switch the machine off the water select SPIN or amp DRAIN programme 43 Description Possible option Prelavado Inicio retardado U Rinse hold Lavado rapido Wash at 40 C 4 rinses Spin impulse Prelavado Inicio retardado WO Rinse hold Lavado rapido Wash at 30 C 3 rinses Short spin Prelavado Inicio retardado U Rinse hold Lavado rapido Cold wash 3 rinses Short spin Wash at 30 C 3 rinses Short spin Inicio retardado U Rinse hold Prelavado Inicio retardado U Rinse hold Lavado rapido Cold wash 3 rinses Short spin Cold wash or wash at 30 C depending on the selected position 3 rinses Short spin Inicio retardado Rinse hold Load 2kg 2kg 2kg 2kg 2kg 1kg ENGLISH Programme table Special washing programmes Programme cl Washing Stains and type of fabric dial programme position With this programme it is possible to rinse and spin garments which have been washed by hand The machine performs 3 rinses and it finishes with a short spin ACLARADOS This programme can be used to perform a short spin for garments washed by hand for example to wring them out before hanging them up This programme can be used to drain and spin too when U RINSE HOLD option has been selected To drain the water from the last rinse in programmes with U RINSE HO2. The drainage system pipes are blocked The laundry load is off balance redistribute the garments in the drum to allow the machine to spin The machine does not drain and or does not spin There is water on the floor There is too much detergent or an inappropriate detergent has been used it makes too much foam Check whether there are any leaks from one of the inlet hose fittings It is not always easy to see this as the water runs down the hose check to see if it is damp The drain hose may be damaged or is not securely positioned to prevent leaks The detergent dispenser drawer is clogged The drainage system pipes are blocked 47 Problems Unsatisfactory washing results The machine vibrates when spinning The door does not open Spinning starts late or the machine does not spin The machine makes an unusual noise No water is visible in the drum 48 Possible cause Little detergent or an inappropriate one has been used An insufficient amount of detergent leaves the laundry looking grey Stubborn stains have not been treated prior to washing The correct wash programme has not been selected Too much laundry has been placed in the drum The transit bolts and packaging have not been removed The machine is in contact with the wall or furniture The machine is not level and stable check diagonally The laundry is not well distributed in the drum There may not be enough la
3. The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent Pour liquid detergent into the dispenser drawer compartment marked WY just before starting the programme Any fabric softener or starching additives must be poured into the compartment marked amp before starting the wash programme Follow the product manufacturer s recommendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer 38 Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric load size degree of soiling and hardness of the water used Water hardness is classified in so called degrees of hardness Information on hardness of the water in your area can be obtained from the relevant water supply company or from your local authority Follow the product manufacturer s instructions on quantities to use Use less detergent if you are washing a small load the laundry is lightly soiled large amounts of foam form during washing Degrees of water hardness Degrees Level Characteristic German French dH T H 1 soft Ale 2 medium 2 3 hard is 4 very hard more than more than 37 G International wash code symbols These symbols appear on fabric labels in order to help you choose the best way to treat your laundry SY ww w Ww Energetic wash Y Max wash Max wash Max wa
4. specifications DIMENSIONS Height 85 cm Width 60 cm Depth 60 cm MAXIMUM RECOMMEND LOAD Cotton linen 5kg Synthetics 2kg Delicates 2 kg Woollens 1kg SPIN SPEED ZWF 380 800 rpm m x ZWF 3100 1000 rpm max POWER SUPPLY VOLTAGE FREQUENCY 230 V 50 Hz TOTAL POWER ABSORBED 2100 W MINIMUM FUSE PROTECTION 10A WATER PRESSURE Minimum 50 kPa Maximum 800 kPa C This appliance complies with the following EEC Directives 73 23 EEC of 19 02 73 relating to low voltage 89 336 EEC of 03 05 89 relating to electromagnetic compatibility 30 Installation Transit security bars Hydraulic connection Before starting the machine up the transport security bars must be removed as follows There should be a COLD WATER tap near the You are advised to keep all the transport security washing machine with a screwing on connection bars In case the appliance has to be transported pipe of 3 4 gas for the water supply a sink a wash again basin or a drainage system in the wall Previously check if 1 Unscrew and remove the three rear screws by means of a key the running water is clean If not run off a reasonable amount of water to flush out any debris that may have collected in the pipes itis not a hot water tap ENGLISH Have the permanent drainage system in the wall checked by a plumber 1 Carefully screw the pipe to the tap taking care not to damage the screwdrive and fix the nut well on
5. the appliance is provided with such a device Make sure your socket outlet is provided with an adequate earthing too The manufacturer declines any liability in case of accidents or incidents should these safety measures not be observed The power supply cable only can be replaced by a person of our Service Force Cenire Your new washing machine This new machine meets all modern requirements for effective treatment of laundry with low water energy and detergent consumption The balance control device reduces the risk of instability in machine movement and it guarantees a quieter operation ENGLISH Description of the appliance 1 Detergent dispenser drawer 2 Programme chart 3 Control panel 4 Door handle 5 Drainage area door 6 Adjustable feet Detergent dispenser drawer U Prewash u Main wash amp Fabric softener starch 33 Use Control panel ZANUSSI ESSENTIAL BLANCOS AHORRO ENERG A C s PLANCHADO FACIL CARGA MIXTA si u ACLARADOS E5 DESCARGA kW CENTRIFUGADO O PARADA O 1 Detergent dispenser drawer Programme option buttons Depending on the programme different option buttons can be combined When these buttons are pressed the corresponding lights come on When they are pressed again the lights go off If an incompatible option with the selected programme has been chosen the corresponding light flashes for about 2 seconds The option buttons 8H 4H INICIO R
6. the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product Tips for environmental protection To save water energy and to help protect the environment we recommend that you follow these tips Normally soiled laundry may be washed without prewashing in order to save detergent water and time the environment is protected too e The machine works more economically if it is fully loaded 29 e With adequate pre treatment stains and limited soiling can be removed the laundry can then be washed at a lower temperature Measure out detergent according to the water hardness the degree of soiling and the quantity of laundry being washed Installation instructions A It is dangerous to alter the specifications or attempt to modify this product in any way AN Care must be taken to ensure that the appliance does not stand on the electrical supply cable Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person AN The power supply cable only can be replaced by a person of our Service Force Centre Technical
7. to the end in order to avoid leaking 2 Lean the appliance back on the rear and fit one of the polystyrene angles between the appliance and the floor Make sure the hoses are not squashed 2 If necessary turn the hose adequately by unscrewing the nut at the rear of the appliance Now tighten the nut anew to avoid leaks Open the tap and assure that it does not leak and close it again 3 Carefully remove the plastic bags on the left and the right pulling them to the centre of the appliance 3 Place the discharging hose in a washbasin or sink with the aid of the bent piece delivered separately The bent piece has to be entered into the tube s mouth in order to assure the support Aforesaid piece allows the hose to be fixed to the wall by means of an opening on the upper part and that way the hose does not move and its falling is avoided P0002 4 Place the machine in an upright position and remove the three plastic bolts 5 Plug the 3 holes with the plastic plugs which you can find in the envelope containing the instruction booklet 31 1 5 m Max LD 60 cm Min 90 cm Max IMPORTANT The distance from
8. 35 292 955 1 ZANUSSI LAVADORA WASHING MACHINE ZWF 380 ZW F 3100 MANUAL DE USO USER MANUAL CE Dear customer Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages We recommend that you keep this instruction booklet for future reference and pass it on to any future owners Transport damages When unpacking the appliance check that it is not damaged If in doubt do not use it and contact the Service Centre The symbols you will see on some paragraphs of this booklet have the following meaning The warning triangle and or the key words Warning Caution emphasize information that is particularly A important for your safety or correct functioning of the appliance The information marked with this symbol provides additional instructions and practical tips on the use of i the appliance Y Tips and information about economical and ecological use of the machine are marked with this symbol 26 Contents Warnings 28 29 Maintenance 45 P Bodywork 45 Disposal 29 Detergent dispenser drawer 45 Tips for environmental protection 29 ile A 2 ater inlet filter 46 Technical specifications 30 emergency empiying Our x E Frost precautions 46 A MSI ANON e Something not working 47 49 iin Unpacking 31 Hydraulic connection 31 Levelling 32 Electrical connection 32 Your new washing machine 33 Description of the appliance 33 Detergent dispe
9. ETARDADO PRELAVADO LAVADO RAPIDO and REDUCCION DE CENTRIFUGA must be selected after the required programme has been chosen by turning the programme selector see section 8 and before starting the machine by pressing INICIO PAUSA button 2 8H 4H INICIO RETARDADO button This button allows the delay of starting of the washing programme by 8 H and 4 H hours The delay which has been selected is indicated when the corresponding light comes on To use this option proceed as follows 1 Select the required programme by the programme selector see section 9 2 Press the required option buttons 3 Push 8H 4H INICIO RETARDADO button as many times as necessary to get the required delay until the corresponding light comes on 4 Press INICIO PAUSA button The machine will begin the countdown IMPORTANT e If you would want to cancel 8H 4H INICIO 34 ZWF 3100 RETARDADO option or to change the selected delay proceed as follows 1 Turn the dial programme selector to position O 2 Start the normal process to select a programme again If you need to stop the machine to put in more laundry having selected 8H 4H INICIO RETARDADO option first proceed as follows 1 Depress INICIO PAUSA button 2 Wait two or three minutes before opening the door to give the electric locking mechanism time to release 3 Place the laundry in the drum 4 Press again the INICIO PA
10. LD option selected DESCARGA To cancel the running wash programme and to switch the machine off O PARADA Possible option 3 rinses Short spin Water drain Inicio retardado U Rinse hold Load 5 kg 5 kg 5 kg When this option is selected the last rinse water does not drain to avoid wrinkling in the fabrics To drain the water select O SPIN or 4 DRAIN programme 44 Maintenance 1 Bodywork 3 Cleaning of the drainage area Clean the outside of the machine with warm water The drainage area must be cleaned if the pump has and a neutral non abrasive household detergent been blocked with objects such as buttons safety Rinse with clean water and dry with a soft cloth pins coins etc or if lint has built up because Important do not use methylated spirits solvents or clothes that generate lint have been washed at high similar products to clean the bodywork temperatures Pull out the plug from the power socket If necessary wait until the water has cooled down Open the drainage area door ENGLISH 2 Detergent dispenser drawer After a while detergents and fabric softeners leave Place a bowl to collect the water deposits in the drawer Release the emergency emptying hose place it in Clean the drawer from time to time by rinsing it under the bowl and remove its cap when the bowl is full a running tap To remove the drawer from the put the cap back on the emergency emptying hose machine p
11. USA button The 8H 4H INICIO RETARDADO option can t be selected with programmes amp DRAIN or SPIN 3 PRELAVADO button Adds a pre wash phase at the start of the cycle with water heating to 30 C In COTTON and SYNTHETIC cycles performs a short spin before passing to the washing phase This option cannot be selected for LANA and LAVADO A MANO cycles 4 LAVADO R PIDO button Using this option you can get good washing results in a short period of time since with option the COTTON SYNTHETICS and DELICATES programmes are modified in order to obtain short washing times recommended for small or lightly soiled loads This modification consists of reducing the number of rinse cycles one less and also increases the water level used in the remaining two rinse cycles 5 INICIO PAUSA button 7 Programme progress display After selecting the required programme by the The light LAVADO will iluminate during all the programme selector see section 8 press this programme turning off when it has finished button to start the machine the corresponding light stops flashing and will keep lighting until the programme finishes To interrupt the running programme depress The light FIN will illuminate to indicate that the selected programme has finished INICIO PAUSA button the corresponding m light starts to flash To restart the programme from the point at O 700 2 which it was inter
12. apkin 1009 quilt cover 700 g sheet 500 g pillow case 200g tablecloth 250g towelling towel 200 g tea cloth 100g night dress 200 g ladies briefs 100g man s work shirt 600 g man s shirt 200g man s pyjamas 500 g blouse 1009 men s underpants 1009 Removing stains Stubborn stains may not be removed by just water and detergent It is therefore advisable to treat them prior to washing Blood treat fresh stains with cold water For dried stains soak overnight in water with a special detergent then rub in the soap and water Oil based paint moisten with benzine stain remover lay the garment on a soft cloth and dab the stain treat several times Dried grease stains moisten with turpentine lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth Rust oxalic acid dissolved in hot water or a rust removing product used cold Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole Mould stains treat with bleach rinse well whites and fast coloureds only Grass soap lightly and treat with bleach whites and fast coloureds only Glue moisten with acetone lay the garment on a soft cloth and dab the stain Lipstick moisten with acetone as above then treat stains with methylated spirits Remove any residual marks from white fabrics with bleach Red wine soak in water and detergent rins
13. e and treat with acetic or citric acid then rinse Treat any residual marks with bleach ENGLISH Ink depending on the type of ink moisten the fabric first with acetone then with acetic acid treat any residual marks on white fabrics with bleach and then rinse thoroughly Tar stains first treat with stain remover methylated spirits or benzine then rub with detergent paste do not use acetone on artificial silk Detergents and additives Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment Although biodegradable detergents contain substances which in large quantities can upset the delicate balance of nature The choice of detergent will depend on the type of fabric delicates woollens cottons etc the colour washing temperature and degree of soiling All commonly available washing machine detergents may be used in this appliance powder detergents for all types of fabric powder detergents for delicate fabrics 60 C max and woollens liquid detergents preferably for low temperature wash programmes 60 C max for all types of fabric or special for woollens only The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme If using concentrated powder or liquid detergents a programme without prewash must be selected
14. ems listed below During machine operation it is possible that FIN light flashes to indicate that something is not working correctly A flashes door open 2 flashes the water is not drained e 1 flash there is no water filling Once the problem has been eliminated press INICIO PAUSA button to restart the programme If after all checks the problem persists contact your local Service Centre ENGLISH Problems which can be resolved without a technician s help Problems Possible cause The door has not been closed The plug is not properly inserted in the power socket There is no power in the socket The main fuse or the fuse in the plug has blown The programme selector dial is not correctly positioned and INICIO PAUSA button has not been pressed The machine does not start up The water tap is off The filter in the inlet hose is blocked The inlet hose may be squashed or kinked The door has not been closed The machine does not fill The end of the drain hose is lower than the machine The end of the drain hose is submerged in water There is no air circulation in the installation between the machine drain hose and the one in the house The machine fills then empties immediately The drain hose may be squashed or kinked U RINSE HOLDoption has been selected The drain pump may be blocked The drain hose extension is not correct Follow the instructions to connect it to the drain
15. h are designed to be machine washed Follow the instructions on each garment label Do not overload the appliance Follow the instructions in the instruction book Make sure that all pockets are empty Objects such as coins safety pins pins and screws can cause extensive damage Do not machine wash garments saturated with petroleum methylated spirits trichlorethylene etc If such fluids have been used to remove stains prior to washing wait until they have completely evaporated from the fabric before placing garments in the appliance Place small items such as socks belts etc ina cloth bag or pillowcase to prevent them getting trapped between the drum and the tub Use only the recommended quantities of fabric softener An excessive amount could damage the laundry 28 e Leave the porthole door slightly ajar when the appliance is not in use This preserves the door seal and prevents the formation of musty smells e Always check that water has emptied out before opening the door If not drain the water following the instructions in the instruction book Always unplug the appliance and shut the water tap after use General safety e Repairs to the machine must be carried out only by qualified personnel Repairs carried out by inexperienced persons could cause serious danger Contact your local Service Centre e Never pull the power supply cable to remove the plug from the socket always take hold of the plug i
16. hat the drum is empty If you do not intend to put in another wash turn off the water tap Leave the door open to prevent from forming mildew and unpleasant smells ATTENTION lf the J RINSE HOLD option has been selected the last rinse water does not drain To drain the water carry out the following steps 1 Turn the programme selector dial to O 2 Select DRAIN or SPIN programme 3 Press INICIO PAUSA button ENGLISH Programme table Washing programmes for cotton and linen Programme selector Washing F i Load dial programme Stains and type of fabric Description Possible option position Wash at 90 C Prelavado oven BLANCOS For heavily soiled cotton items 3 rinses Pliers nae 5 kg Spin Lavado rapido ENERGIA White cotton for example Wash at 60 C Prelavado 60E moderately soiled work oe 3 rinses Inicio retardado 5 kg ALGODON garments sheets household Spin U Rinse hold linen underwear towels Prelavado Fast coloured cotton or linen Wash at 40 C 40 COLORES Inicio retardado ALGODON RESISTENTES fabrics moderately soiled shirts 3 rinses Rinse hold 5 kg blouses underwear Spin Lavado r pido E Prelavado Non fast coloured cotton or linen Wash at 30 C mae 30 CUIDADOS fabrics moderately soiled shirts 3 rinses lee retardado 5 kg ALGODON COLORES Rinse hold blouses underwear Spin Lavado rapido Cold wash l Prelavado X da Elo For slightly soiled cotton fab
17. light will illuminate 35 8 Programme selector dial The selector dial can be turned either clockwise or counter clockwise Use this selector dial to select the required programme At the end of each programme the selector dial must be turned to position O to switch off the machine ATTENTION If the programme selector dial is turned to another position programme when the machine is working the lights of the programme progress display start to flash The machine will not perform the new selected programme but it will continue running on the same cycle REMEMBER In the event a wrong programme has been selected and the machine is already working proceed as follows 1 Turn the programme selector dial to position O 2 Select the new required programme e If the machine has not already gone through the rinse cycle when you decide to change the running programme in the new programme the water and the detergent from the previous cycle will be re used making it an energy saving tool On the other hand if it is already in the rinse phase detergent bleach must be re measured 3 Press INICIO PAUSA button to start the new cycle 36 i Washing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer s washing instructions Sort the laundry as follows whites coloureds synthetics delicates woollens Temperatures 90 for norma
18. lly soiled white cottons and linen e g tea cloths towels tablecloths sheets for normally soiled colour fast garments e g shirts night dresses pyjamas in linen cotton or synthetic fibres and for lightly soiled white cotton e g underwear x cold for delicate items e g net curtains mixed 30 40 laundry including synthetic fibres and woollens 60 Before loading the laundry Never wash whites and coloureds together Whites may lose their whiteness in the wash New coloured items may run in the first wash they should therefore be washed separately the first time Make sure that no metal objects are left in the laundry e g hair clips safety pins pins Button up pillowcases close zip fasteners hooks and poppers Tie any belts or long tapes Remove difficult stains before washing Rub particularly soiled areas with a special detergent or detergent paste Treat curtains with special care Remove hooks or tie them up in a bag or net Maximum loads Recommended loads are indicated in the programme charts General rules Cotton linen drum full but not too tightly packed Synthetics drum no more than half full Delicate fabrics and woollens drum no more than one third full Washing a maximum load makes the most efficient use of water and energy For heavily soiled laundry reduce the load size 37 Laundry weights The following weights are indicative bathrobe 1200 g n
19. nser drawer 33 Use 34 Control panel 34 Controls 34 36 Washing hints 37 Sorting the laundry 37 Temperatures 37 Before loading the laundry 37 Maximum loads 37 Laundry weights 37 Removing stains 37 Detergents and additives 38 Quantity of detergent to be used 38 International wash code symbols 39 Operating sequence 40 41 Washing programmes 42 44 27 A Warnings The following warnings are provided in the interests of overall safety You must read them carefully before installing or using the appliance Installation All internal packing must be removed before using the appliance Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed Refer to the relevant paragraph in the instruction book Any electrical work required to install this appliance must be carried out by a qualified electrician Any plumbing work required to install this appliance must be carried out by a qualified plumber After having installed the machine check that it is not standing on its electrical supply cable If the appliance is placed on a carpeted floor ensure that air can circulate freely between the feet and the floor The power supply cable only can be replaced by a person of the Technical Service Use This appliance is designed for domestic use It must not be used for purposes other than those for which it was designed Only wash fabrics whic
20. penser drawer until it stops U rinse hold option Measure the required amount of detergent pour it into the main wash compartment WJ and into the compartment marked UJ 1000 om if UJ PRE WASH option O 500 has been chosen ou vano O FIN 6 Select the required option push button s 3 Measure the fabric softener BHO preuvaDo RAPIDO HO O O If required pour fabric softener into the compartment co marked amp the amount used must not exceed the MAX mark in the drawer C Close the drawer gently AL 067A 40 7 OPTIONAL Select if required 8H 4H INICIO RETARDADO option button Push 8H 4H INICIO RETARDADO button as many times as necessary until the corresponding light to the required delay 8 H 4 H comes on 8HO 4HO INICIO RETARDADO AL 067B 8 Start the machine Before starting the machine check that e the appliance is plugged in e the water supply tap is turned on e the drain hose is correctly and securely positioned e the door and the detergent dispenser drawer are closed To start the selected programme push INICIO PAUSA button the corresponding light will stop flashing and will remain lit until the end of the programme INICIO PAUSA O O AL 068 If 8H 4H INICIO RETARDADO option has been chosen the machine will begin the countdown 9 Modification of a running washing
21. programme Once the programme has started it only can be modified by turning the programme selector dial to O and afterwards the new programme can be chosen The washing water remains in the tub provided that the machine does not reach the rinse phase since in this case the machine drains it automatically Start the new programme by pressing INICIO PAUSA button 41 10 Interrupting a programme Depress INICIO PAUSA button to interrupt a running programme the corresponding light will begin flashing Press this button again to re start the programme 11 Opening the door after the programme has started Firstly stop the machine by pressing INICIO PAUSA button After about two or three minutes the door can be opened If the door does not open this means that the temperature of the water is too high that the water level exceed the lower limit of the door which could cause overflowing or that the drum is spinning If the door cannot be opened but you need to open it switch the machine off by turning the selector dial to O After approximately two or three minutes the door can be opened PAY ATTENTION TO THE WATER LEVEL AND TEMPERATURE 12 At the end of the programme The machine stops automatically Release of the lock is indicated when FIN light comes on Turn the programme selector dial to position O to switch the machine off Remove the laundry from the drum and carefully check t
22. ress the button in the rear left hand corner Empty the bowl Repeat the procedure until you have completely emptied the washing machine To facilitate cleaning the top part of the additive compartments can be removed To continue unscrew the lid of the diaphragm by turning it counter clockwise and pull it out Always keep a rag nearby to dry up spillage of water when removing the cover Remove the objects such as buttons coins and the lint that has been accumulated in the area of the pump impeller by rotating it Screw the lid of the diaphragm clockwise be sure is completely tighten Replace the emergency emptying hose in its initial position and close the drainage area door Detergent can also accumulate inside the drawer recess clean it with an old toothbrush Refit the drawer after cleaning 45 4 The water inlet hose filter If your water is very hard or contains traces of lime deposit the water inlet filter may become clogged It is therefore a good idea to clean it from time to time Turn off the water tap Unscrew the water inlet hose Clean the filter using a hard bristle brush Tighten up the inlet hose 5 Emergency emptying out If the water is not discharged outlet pump is blocked filter or drain hose are clogged proceed as follows to empty out the machine pull out the plug from the power socket close the water tap open the drainage area door place a bowl to collect the
23. rics 3 rinses ana 5kg i Spin Lavado r pido To cancel the running wash O PARADA programme and to switch the machine off When this option is selected the last rinse water does not drain to avoid wrinkling in the fabrics To drain the water select O SPIN or amp DRAIN programme In compliance with EC directive 92 75 the consumption figures indicated on the energy label refer to the 60 C wash programme for cotton programme 60E with a wash load of 5 Kg 42 Programme table Washing programmes for synthetics mixed fabrics delicates and wool Programme selector dial position 40 SINTETICOS 30 SINTETICOS de SINT TICOS 30 DELICADOS X DELICADOS 30 LANA When this option is selected the last rinse water does not drain to avoid wrinkling in the fabrics To drain Washing programme PLANCHADO F CIL SINT TICO EN FR O LAVADO A MANO DELICADOS EN FR O PARADA Stains and type of fabric Special programme for synthetic fabrics which makes ironing easier Synthetic or mixed fabrics underwear coloured garments perma press shirts blouses Slightly soiled delicate synthetic fabrics Especially delicate fabrics Delicate fabrics such as curtains Use this wash cycle to wash Woolmark garments according to the instructions on the garments label and following the instructions booklet provided by the manufacturer of this machine
24. rupted press INICIO PAUSA O 5o mm button again oe 6 REDUCCION CENTRIFUGADO un button This button allows the reduction of the final and the ne intermediate spin speed or to select the U ANTIARRUGAS option The light FIN flashes in the event of operating problems 4 flashes door open e 2 flashes problem with water draining e 1 flash problem with water supply For more information see paragraph Something not working at the end of this booklet 1000 Press this button so many times as it was necesary until the relevant light turns on corresponding to the wished option The speeds on the lights reference to cotton programmes in both models ZWF380 and ZWF3100 For the model ZWF3100 The light 1000 r p m correponds to 900 r p m in synthetics and wool programmes and in the delicates programmes corresponds to 700 r p m The lights 700 r p m and 500 r p m are common for all programmes making reference to the same speed For the model ZWF380 The light 800 r p m correponds to 700 r p m in the delicates programmes The lights 700 r p m and 500 r p m are common for all programmes making reference to the same speed NOTE In both models by default the light of spin speed will turns on according to the selected programme J RINSE HOLD by selecting this option the water of the last rinse is not drained in order to prevent the fabrics from wrinkling When the programme has finished FIN
25. sh Max wash temperature temperature temperature temperature Y 95 C 60 C 40 C 30 C a ET Hand wash Do not w7 27 207 w wash at all ENGLISH Delicate wash A Bleaching LN Bleach in cold water ZS Do not bleach A Ironing cl Hot iron max 200 C el Warm iron max 150 C c Lukewarm iron max 110 C A Do not iron O O O R Dry cleaning Dry cleaning Dry cleaning in Dry cleaning Do not in all solvents perchlorethylene in petrol dry clean petrol pure alcohol pure alcohol R111 amp R 113 and R 113 high I temperature O JO BR NY O temperature y Drying Flat On the line On clothes Tumble dry Do not hanger tumble dry 39 G Operating sequence Before washing your first load of laundry we recommend that you run a cotton cycle at 60 C with the machine empty in order to remove any manufacturing residue from the drum and tub Pour half of the normal amount of detergent into the main wash compartment and start up the machine 1 Place the laundry in the drum 4 Select the required programme Open the door by pulling the handle outwards Place Turn the programme selector to the required the laundry in the drum one item at a time shaking programme them out as much as possible Close the door 2 Measure the detergent 5 Select the spin speed or Pull out the dis
26. ter consumption Performance is nevertheless excellent The machine makes an unusual noise The machine is fitted with a commutator motor which improves machine performance ENGLISH 49 EHPOESL Z 12 2004
27. the floor to the highest part of the hose should be between 60 to 90 cm It is advised to be between 60 and 70 cm The hose must not be bent nor twisted to avoid clogging Should a prolongation of the discharging hose be unavoidable this must never surpass 1 5 m and must be of the same diameter as the original hose Make sure the hoses are not too tense Levelling Level the appliance by loosening or tightening the feet Once in the right position fix the feet by pushing the nuts A see graphic P0254 against the base of the case Accurate levelling will prevent vibration noise and displacement of the appliance during operation Some vibration is inevitable especially if placed on a wooden floor Wooden floors are particularly susceptible to vibrations If possible always place the appliance on a solid floor 32 Electrical connections Before plugging the appliance make sure that 1 the mains of your installation is the same as on the rating plate of your appliance the plate is sticked to the rear of the appliance 2 The meter the fuses the wiring and the socket outlet can support the max power absorbed stated on the rating plate 3 The socket base and the plug must fit in adequately without any reducing interposition multiple outlets or adapters If necessary replace the socket outlet by an adequate one The applicable rules for electrical security require an adequate earthing The plug of
28. tself e During high temperature wash programmes the door glass may get hot Do not touch it Child safety Children are often not aware of how dangerous electrical appliances can be When the machine is working children should be carefully supervised and not be allowed to play with the appliance The packaging components e g plastic film polystyrene can be dangerous to children danger of suffocation Keep them out of children s reach vs Disposal Packaging materials The materials marked with the symbol 43 are recyclable gt PE lt polyethylene gt PS lt polystyrene gt PP lt polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers Machine e Keep all detergents in a safe place out of children s reach Make sure that children or pets do not climb into the drum e When the appliance is to be scrapped cut off the electrical supply cable and destroy the plug with the remaining cable Disable the door catch in order to prevent children from becoming trapped inside while playing T 9 l Z m The symbol x on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for
29. undry in the drum The programme is still running The door lock has not released yet Water in the tub if there is water in the tub the door cannot be opened WJ RINSE HOLD option selected The electronic off balance detection device has interrupted the spin because the laundry is not evenly distributed in the drum The laundry is redistributed by reverse rotation of the drum This may happen several times before the off balance disappears and normal spinning can resume If after 10 minutes the laundry is still not evenly distributed in the drum the machine will not spin In this case redistribute the load manually and re select the spin programme The machine is fitted with a type of motor which makes an unusual noise compared to other traditional motors This new motor ensures a smoother starting and an even distribution of the laundry in the drum when the machine is spinning At the same time it increases the appliance stability Appliances using modern technology are energy efficient They use very little water without affecting washing results If you are unable to identify or solve the problem contact our service centre Before telephoning make a note of the model serial number and purchase date of your machine the Service Centre will require this information Water is not visible in the machine The machine which is the result of modern technology runs in a very economical way with low wa
30. water release the emergency emptying hose place it in the bowl and remove its cap when the bowl is full put the cap back on the emergency emptying hose empty the bowl repeat the procedure until you have completely emptied the washing machine replace the emergency emptying hose in its initial position and close the drainage area door if necessary wait until the water has cooled down 46 6 Frost precautions If the machine is installed in a place where the temperature could drop below 0 C proceed as follows disconnect the appliance close the water tap if necessary wait until the water has cooled down open the drainage area door place a bowl to collect the water that will flow out release the emergency emptying hose place it in the bowl and remove its cap when the water stops flowing out put the cap back on the emergency emptying hose replace the emergency emptying hose in its initial position and close the drainage area door By doing this any water remaining in the machine is removed avoiding the formation of ice and consequently breakage of the affected parts When you use the machine again make sure that the ambient temperature is above 0 C Something not working Certain problems are due to lack of simple maintenance or oversights which can be solved easily without calling technical service Before contacting your local Service Force Centre please check the following possible probl
Download Pdf Manuals
Related Search