RADIUS II
Contents
1. DAB Clock Radio Radius ll USER S MANUAL Thank you for purchasing this product Please read this manual thoroughly before operating the unit and keep it for future reference WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN LIGHTNING FLASH WITH ARROWHEAD SYMBOL EXCLAMATION POINT within an equilateral triangle within an equilateral triangle is intended to alter the is used to indicate that a specific component shall be user to the presence of uninsulated dangerous voltage replaced only by the component specified in that within the products enclosure that may be of sufficient documentation for safety reason magnitude to constitute a risk of electric shock to persons To achieve the utmost in enjoyment and performance and in order to become familiar with its features please read this manual carefully before attempting to operate this product this will assure you years of trouble free performance and listening pleasure Important Notes e This safety and operating instruction should be retained for future reference e The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom e Do not install the product in the following areas Places exposed to direct sunlight or close to radiators On top of other stereo equipment that radiate too much heat Blocking ventilation or in a dusty ar2. To continue enjoying your program press to power it on FACTORY RESET X9 Note doing this order you can delete all of the preset stations and return the radio to its original factory settings 1 The path is Press MENU Factory Reset Factory Reset lt No gt Yes 2 Press or P to Yes and then press OK to confirm it is done The preset radio stations are erased and the radio is returned to its original factory settings SW VERSION 1 Press MENU and then press lt 4 SW version 2 Press OK to confirm and you get it VOLUME CONTROL Adjust the radio volume by pressing VOL or VOL SPECIFICATION Audio Output 2Wrms X 2 Frequency Ranges FM 87 5 108MHz DAB 174 240MHz Unit Power input 5Vdc 1200mA Power Supply AC Power Input 100 240V 50 60Hz 0 2A Output 5Vdc 1200mA Dimension 140mm x 140mm x 143mm Product Warranty Subject to the warranty repair conditions below in addition to all rights and remedies to which you may be entitled under the Competition and Consumer Act 2010 Commonwealth and any other relevant legislation the manufacturer warrants this product to be free from defects in materials or workmanship for a period of 12 Months from the original date of purchase Warranty Repair Conditions A This Product Warranty only applies provided the product G Has been purchased in Australia and sold by Authorised Distributors or Dealers and only where th
3. noted instructions or repair which reveals the product is in normal working order Cabinet parts user replacement batteries or leads unless the defective items are reported at the time of purchase Service calls only apply to Television display devices CRT LCD Plasma with screen sizes greater than 68cm in the major metropolitan areas of Australia or the normal operating areas of the nearest Authorised Service Centers Requested service visits to the customer premises will be made during normal working hours of the customary working week upon request by the customer Where such a visit is made on a day arranged by the customer and the service technician is unable to obtain access to the product the Service Centre will be entitled to make a separate charge for service call fee time and distance travelled The AWA Service Centre and its Authorised Service Centres may charge for work done where the product is found to be in good working order Example charges may be made where the problem is found to be due to incorrect setting of customer controls use of poor associated equipment e g poor antenna systems or the inability of the product to operate with faulty or incompatible equipment If the product is sent to an Authorised Service Centre the owner is responsible for the cost of transport to and from the Service Centre In addition the product is at the owners risk while in transit to and from the authorised Service Centre No person is a
4. the appliance beyond that described in the user operation instructions All other servicing should be referred to qualified service personnel DO ensure that all electrical connections including the mains plug extension leads and inter connections between the pieces of equipment are properly made and in accordance with the manufacturer s instructions Switch off and unplug the power before making or changing connections DON T remove any fixed cover as this may expose dangerous voltages DON T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety DON T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation Switch off using the switch on the equipment and make sure that your family knows how to do this Special arrangements may need to be made for infirm or handicapped people DON T continue to operate the equipment if you are in any doubt about if it s working normally or if its damaged in any way Switch it off unplug the mains power and consult your dealer LOCATION OF CONTROL UNIT TOP VIEW UNIT FRONT VIEW 7 SLEEP ALARM 1 ALARM 2 PRESET Display AN lt OK gt screen CHIQI SCAN Re INFO SNOOZE SNOOZE mee All modes I a Press to turn unit on off b When alarm is coming press to turn it off Press to decrease volume level Press to increase vol
5. AUDIO 1 The path is Press MENU Audio press OK to confirm 2 Press dor to cycle through options Treble and Bass 3 Press OK to confirm your preferred option and then follow your radio s demonstration to set the value which you prefer for Treble or Bass level Press OK to confirm it is done OTHER FEATURES SET ALARM XA Note ensure that clock is set already dii 1 2 x 00 1 Press ALARMI it will say Alarm 1 Setup n ea meanwhile f icon will be twinkling Alarm 1 Setup 2 Toset alarm 2 press ALARM2 and icon will be Sparkling now let s take set alarm 1 as example 3 While your radio says Alarm 1 Setup press OK to confirm your radio will now running into Alarm 1 Wizard and then follow your radio s instruction configure the following parameters x Alarm states Off On press or P to On press OK to confirm Source Buzzer DAB FM Alarm sounds frequency Daily Once Weekends or weekdays x Alarm volume press or gt to your favor alarm volume and then press OK to confirm your radio will say Alarm saved To Operate SNOOZE e When Alarm is sound press SNOOZE to postpone it e While in SNOOZE function the relative alarm should be twinkling and shows how long it will be elapsed during this time you also can press to stop snooze and press U again to have your radio play e When radio reached SNOOZE time it should be sound aga
6. IN MODE amp Note a make sure your radio is powered on b using the connection lead your radio will be transformed into a high quality digital audio speaker system 1 Connect one end of the audio lead to the headphone or auxiliary out socket of your secondary device connect the other end to the AUX IN socket on the rear of your radio 2 Press MODE repeatedly until Auxiliary Input Mode is displayed 12 00 Auxiliary Input 20 08 2011 3 To gain optimal volume levels adjust the output volume level on both of the source device and on radio itself is recommended eS Note AUX IN allows for quick and easy connection to an MP3 player or other external sound sources SET TIME 1 The path is press MENU gt lt Time gt press OK to confirm and then turn SELECT to view options as below M lt Set 12 24 hour format gt Set 24 hour and Set 12 hour M lt Set Time date gt Manually set up both Time and Date Ml lt Auto update gt Update from DAB and No update M lt Set date format gt MM DD YYYY and DD MM YYYY 2 Then setting time according to your personal preference SET SNOOZE ZA Note this function is unique designed for postpone your alarm 1 The path is Press MENU Snooze Time press OK to confirm 2 Press dor to view options 5 10 15 20 25 30 minutes the default setting is 5 minutes 3 Press OK to confirm your favor option it is done SET
7. Product Warranty 12
8. e products are used and serviced within Australia Is taken for service when required to an Authorised Service Agent together with written instructions indicating specific problem or function requiring investigation Has valid proof of purchase and presented when warranty service is requested Has only been used in a domestic application Has been installed and operated in accordance as noted in the operating instructions under normal use and reasonable care in the opinion of the Service Centre Has not been damaged by the use of accessories which in the opinion of the Service Centre are defective or incompatible with the product Has not been tampered with or repaired including unauthorised alterations by anyone other than the AWA Service Centre or an Authorised Service Centre This Product Warranty does not cover Damage malfunction or failure resulting from use of incorrect voltages incorrect installation accidental damage misuse neglect build up of dirt or dust abuse wear and tear maladjustment of customer controls mains supply problems thunderstorm activity or Acts of God pixel error infestation by insects or vermin exposure to abnormally corrosive conditions or any foreign object or matter having entered the product Mileage or travelling time in respect of service outside the authorised AWA Service Centre nor pick up and delivery cost incurred Service calls arising from failure to correctly operate the product or to observe
9. ea Areas where there is constant vibration Humid or moist places e Do not place near candles or other naked flames e Operate the product only as instructed in this manual e Before turning on the power for the first time make sure the power adaptor is properly connected O O O O For safety reasons do not remove any covers or attempt to gain access to the inside of the product Refer any servicing to qualified personnel Do not attempt to remove any screws or open the casing of the unit there are no user serviceable parts inside refer all servicing to qualified service personnel SAFETY INSTRUCTIONS READ INSTRUCTIONS All the safety and operating instructions should be read before appliance s operated oh oe ee 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating instructions should be followed WATER AND MOISTURE The appliance should not be used near water for example near a bathtub washbowl kitchen sink laundry tub swimming pool or in web basement VENTILATION The appliance should be situated so that its location or position does not interfere with its proper ventilation Do not place on bed sofa rug or similar surface that may block the
10. in To Turn Off Alarm tS Note a To turn alarm off temporary while alarm is coming press V is OK To turn it off permanently please follow below option b b you can simply do a Factory Reset to cancel Alarm you have set or follow below steps press OK to confirm and then follow your radio s illustration until it indicates you Alarm saved it is done SET LANGUAGE 1 The path is Press MENU gt Language press OK to confirm 2 Press or P to cycle through for which you will find English Frangais Deutsch and Italiano available 3 While your expected one is showing up press OK to confirm it is done OTHER FEATURES SET DIMMER XA Note sometimes you may want to adjust the backlight level of your radio to suit your personal preference 1 Repeatedly press DIMMER to adjust backlight level SET SLEEP amp Note sometimes you may want your radio after a settled time turns it off automatically below shows you how to do it 1 Press SLEEP to directly set sleep it will say Set sleep time sleep off 2 Press SLEEP repeatedly to define the snooze period on which you can find off 15 30 45 60 90 minutes available 3 While your preferred option shows up just stop press SLEEP and it is done 4 To check how long the sleep time will be reached press SLEEP again Radio will automatically put itself into standby mode after the setting time has elapsed
11. ith good signal strength press MENU gt lt Scan setting gt gt Strong stations only press OK to confirm AUDIO SETTING M By default all stereo stations are reproduced in stereo For weak stations this may result in a poor signal to noise ratio hiss Ml To play weak stations in mono press MENU gt lt Audio setting gt gt Forced mono press OK to confirm VIEW STATION INFORMATION XA Note only available for DAB and FM mode lt is possible to browse the information that is displayed on the second line of the display when listening to a DAB FM program by pressing INFO repeatedly OTHER FEATURES STATION PRESETS Your radio can store 10 DAB and 10 FM station presets please note that this function only available at DAB or FM mode To store the current station 1 Press and hold PRESET button until it says Preset Store 2 Press or to cycle through preset stations 1 10 3 When your expected preset station number shows up press OK it will say Preset stored the relative preset number will be showing up SELECT PRESET STATION Please note that this function only available at DAB or FM mode To select a stored station 1 Press MODE repeatedly to convert to relevant mode DAB FM mode 2 Press PRESET button it will say Preset Recall 12 00 Preset Recall 1 89 80MHz gt 3 Press or P to your selecting one press OK to confirm OTHER FEATURES AUX
12. st Or You also can complete this order by press MENU and then press or to Full scan press OK to confirm FM OPERATION TUNE TO FM MODE 42 00 1 Press MODE to turn your radio from DAB Mode to FM Mode X9 Note If your radio currently in AUX mode you can shift to FM Mode by repeatedly pressing MODE SEARCH PROGRAMS 1 For first time use it will start at the beginning of the FM frequency range 87 50MHz Otherwise the last listened FM station should be selected 2 To manually scan FM frequency while frequency is showing up gently and quickly press or P to change it 0 05MHz per step 3 Howto perform auto Scanning three ways a To forward auto Scanning the next active station press and then press OK b To backward auto Scanning the next active station make sure frequency shows up press lt 4 and then press OK c Or w simply press OK or SCAN to conduct auto Scanning To auto Scanning the next active station repeat one way of steps The unit will display the frequency changing until it stops at the next station After it reached one end of the frequency range it will search again from the beginning of frequency range FM OPERATION SCAN SETTING M By default FM scans stop at any available station This may result in a poor signal to noise ratio hiss from weak stations M To change the scan settings to stop only at stations w
13. ume level DAB FM mode Press to display queue information DAB and FM mode SCAN Press to scan stations DAB and FM mode Press and hold PRESET until Preset Store show on display then select PRESET desire channel number by pressing Mor then press PRESET again to store preset Press Preset briefly then select desire channel number to recall preset 1 10 a Press ALARM 2 then set time duration source cycle period and volume by pressing or gt confirm by pressing OK b When alarm is coming press to turn it off a Press to set alarm1 need b When alarm is coming press to turn it off SLEEP Press to set sleep for 15 30 45 60 or 90 minutes period DIMMER Press to adjust dimmer Press to enter system setting Press MENU and then press or gt to browse options Time Audio Lanquage Snooze time Factory Reset SW version etc Press repeatedly to convert among DAB FM Auxiliary Input mode aoka Press or to backward or forward press OK to confirm SNoOzER When alarm activates press to active snooze function and postpone alarm LOCATION OF CONTROL UNIT BACK VIEW Power Supply Unique designed for connect power socket cord AUX IN socket Connects to the external audio device Power Supply Socket AUX IN Socket POWER SOURCE SWITCH ON X Note Position the cable antenna so that it cannot be walked on or pinched by items placed on or against with e E
14. uthorised to make or give any assertions statements or undertakings whether expressed or implied about the product other than or additional to the terms of this warranty This product comes with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Where a failure does not amount to a major failure Big W is entitled to choose between providing you with a repair replacement or refund To obtain compensation you would need to provide documentary evidence of the loss or damage suffered and documentary evidence that such loss or damage was a reasonably foreseeable consequence of a failure by Big W to comply with a consumer guarantee under the Australian Consumer Law Such evidence may include photographs statutory declarations receipts or reports eg from your doctor depending on the loss or damage This warranty is provided by Woolworths Limited of 1 Woolworths Way Bella Vista NSW 2153 Please read instruction manual carefully Should you encounter any problems Please contact Telefix for Warranty Support 1300 366 144 Email warrantyhelo awa com au The original proof of purchase must be kept and produced for service requirements under this
15. ventilation openings in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings HEAT The appliance should be situated away from heat sources such as radiators stoves or other appliances including amplifiers that produce heat POWER SOURCE the appliance should be connected to power supply only of the type described in the operating instructions or as marked on the appliance POWER CORD PROTECTION power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them POWER LINES an outdoor antenna should be located away from power lines OBJECT AND LIQUID ENTRY care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings ESD WARNING the display does not function properly or not reaction to operation of any the control may due to the electrostatic discharge Switch off and unplug the set Reconnect after a few seconds DAMAGE REQUIRING SERVICE the appliance should be serviced by qualified service personal when The power supply cord or plug has been damaged Objects have fallen into or liquid has been spilled into the appliance enclosure The appliance has been exposed to rain The appliance has been dropped or the enclosure damaged The appliance does not appear to operate normally SERVICING the user should not attempt to service
16. xtend the cable antenna found on the rear of radio press to switch it on the display will show Welcome to Digital Radio DAB OPERATION FOR INITIAL USE e For initial use your radio will make an auto Scanning to scan all stations available and store them e Please wait whilst the scan is in progressing as soon as the scan is completed the DAB stations will be displayed in alohanumeric order The first station in the list will be selected Note a if no DAB signal is found in your area it may be necessary to relocate your radio Or to check that DAB coverage is available in your area SHIFT TO ANOTHER PROGRAM uit e DAB 1 While playing a DAB program you can shift to another 1 2 a 00 program by pressing or to browse Station list 2 While your expecting station shows up press OK to lt Classic confirm and it is done DAB OPERATION PRUNE INACTIVE STATIONS XA Note this function only activated in DAB mode doing this to let only active stations ones that are currently broadcasting available 1 The path is Press MENU and then press dor to Prune press OK to confirm your radio will ask you Prune lt No gt Yes 2 Press or gt Yes press OK to confirm UPDATE STATIONS LIST XA Note Put your radio in a place where with strong DAB signal 1 Press SCAN directly the unit will scan all the DAB channels and add any new stations available to the Station li
Download Pdf Manuals
Related Search