Digital High Defintion 230/12V Satellite Receiver User Manual
Contents
1. DiSEqC 2 0 None o SRSESEREEeRescesrceer ro Motor None eee dose tant 2 Process On the left side of the screen there is a list of satellites which is pre Programmed Settings of the chosen satellite is displayed on the right side Process Select the first satellite to be set up with UP DOWN Press the OK button The chosen satellite is marked with a hook confirming this satellite will be considered in the coming channel scan Press the button RIGHT to access to the right side Select the option with UP DOWN and change the parameter with LEFT RIGHT Press Menu after defining all parameters for this satellite to get back to the Left side If your satellite system can receiver signals from a number of satellites Select a further satellite with UP DOWN Press OK and define the parameter On the right side Repeat this procedure for all satellites available for your receiver Notes After a correct setting an approximate value of the signal quality will be Shown on the lower part of the menu If a satellite is missing on the list press the Red button A dialogue window will appear input the value for longitude east west and frequency and choose Blind Scan in the coming channel san If you add a satellite to the list there will be no display of the signal quality for this satellite in spite of correct setting Signal quality can only be displayed for satellites saved under the transponder list Press GOTO to displa2. As soon as these cable connections have been made correctly you can switch on the devices First step Switch on your TV set Please make sure that your TV set has been adjusted to the receiver In case of a Scart connection the TV set must be set to the correct AV chan nel In case of HDMI connections the TV set must be switched over to HDMI Second step Switch on the receiver As the antenna has not been directed yet the Receiver will show no Signal Message Third step Now you can begin to make the correct settings for your receiver so that then you will be able to direct the antenna with the Easy Find LNB Please proceed as follows Press the OK key of the remote control of your receiver Now you should see the following image on your TV screen BOO LOF HO DOS arte HO POS tani Ho 00S GAT 1 Dh ProShe ben CDT RTL Tele hipi Gh ATL GOS kabel eins Fourth step Press the GoTo key of the remote control of your receiver once Now the Easy Find LNB list appears ASTRA LH LER 1L 1H GUDI Das Erste HO big FOF HO 0003 arte HD DIDS Jai HD pigs SATI PrI Prosieben COO ATL Teicyigi pain RTLA 0009 kabal eins From this menu select the satellite you wish to find with the CHA or CHYF keys The corresponding satellite must be marked grey If this is the case press the OK key to confirm your selection Fifth step Now you see the following image on your TV screen Now press the INFO key of the
3. Panel Remote Control System Connection Satellite Setting Channel Scan Basic Operation Program Setting Picture Setting Channel Search Time Setting Option system Setting USB Time shift and Recording Timer EasyFind Troubleshooing Technical Specifications Notice About Recycling Declaration of Conformity Front and Rear Panel cal ae acl P 1 Front panel 2 Rear panel LNB IN This socket connects to your satellite antenna LNB OUT USB For Software upgrade and media playback IR Sensor Used to Receive the signal from Remote Control HDMI High definition audio and video output used to connect to a HDMI device CVBS L R Connector for the analog output with the delivered chinch cable 12V Power Connector Remote Control POWER SUB T TTX MUTE OR Mm EPG GOTO PAGE REPEAT LANG PAGE MENU A EXIT PVR V FORMAT ASPECT TIMER POWER Switch the receiver in and out of Standbymode 0 9 Numeric keys CH CH Program changing keys MENU Display main menu on TV screen and press again to disappear menu OK To confirm current setting or display channel list in no menu mode VOL VOL To increase decrease volume EPG Shows the Electronic Program Guide FAV Displays your favorite channel list Press FAV again to access to the other favorite lists V FORMAT Switch the HDMI resolutions RECALL Go back to the previous viewed channel RED GREEN YELLOW BLUE Used to
4. navigate bet ween pages in teletext mode and special functions in Menu or EPG TTX Switch in Teletext if current channel has this option and use EXIT key to quit Teletext SUB T Display subtitle options availability depends on the channel LANG Change the Audio Language and Left Right channel availability depends on the channel EXIT Use this key to quit current menu INFO Displays information about the current channel TV RADIO Switch between Digital Radio and Digital TV mode MUTE To switch audio output on off PAGE PAGE To navigate inside the menus ASPECT Switches Aspect Ration such as 4 3 16 9 TIMESHIFT Use to start Time shift function TIMER Use to access ON OFF Timer directly PVR Use to access recorded content in USB drive GOTO Go to desired time in multimedia file Multimedia keys a e e PLAY PAUSE STOP REC T REW FF PREV NEXT REPEAT Repeat play multimedia file Installing the Batteries Remove the battery cover from the rear of the Remote Control and place 2xAAA size batteries inside the compartment Please make sure the battery polarities match the polarity markings inside The compartment 1 Open the cover 2 Install batteries 3 Close the cover Z 7 Using the Remote Control To use the Remote Control point it towards the external IR Sensor of the Digital Set Top Box The Remote Control has a range of up to 6 metres from the Set Top Box at an Angle o
5. remote control of your receiver twice The following will be displayed Das Erste HD Saarching 11484 H Ja ARTRAA LH 1ER 1i 1H ELE OLELE Press the red function key to enable the Easy Find function Now you can go to your antenna to direct it You will note that the LED on your Easy Find LNB has begun to flash This means it is active Now the antenna can be directed to the selected satellite Sixth step Now begin with the direction of your antenna Please proceed as follows Stand behind the antenna and move the antenna completely into vertical position see picture B Make sure that the receiving component of the antenna Easy Find LNB is directed towards the south see picture A wS waagerechter Setenwinkel sH sen rechter Hohenwinkel a Now turn your antenna slowly to the East left or to the West right while observing the still flashing LED diode of your Easy Find LNB depending on where your selected satellite is located 20 b If you are approaching a satellite the LED diode begins to flash faster with red light With increasing signal strength the colour changes to orange and the LED diode does not flash anymore Please note that your antenna is also able to receive other satellites Also with other satellites it is possible that the LED diode changes to orange with or without flashing If you have found the correct satellite the one you have selected it must be possib le to direct t
6. the connection of multiple antennas or LNB to the receiver If you have a DiSEqC switcher you will have to select one of the connections of the satellite chosen on the left side Please check which version 1 0 1 1 can be supported in the manual of your switcher Motor Rotatable antennas require extended configurations We recommend Professional installation from a technician Please set up according to your Antenna You can open further set up windows with the RED and the GREEN Button After the set up has been done for all reachable satellites please press the BLUE button to open the menu for channel scan Channel Scan There appears a window showing channel search upon pressing the BLUE Button on the menu of the satellite setting In this window you can make Three entries to affect the can result Channel Search Crypted All Channels Service Type All Scan mode Default The receiver scans channels according to a pre programmed list This search process goes fast without being able to find programs on new Transponders Blind search The receiver scans every possible frequency It takes a little bit more time than the default scan However it is possible to find programs from unknown transponders Network The receiver scans channels according to a pre programmed list The frequency of a new transponder could be found out through analysis of the known transponders The scan process is shorter than the bl
7. Adjust the position of the Remote Control and is not responding facing or close enough move to the Set Top Box closer to the unit icture is breakingjthe signal is too weak check aerial cable and p TT omeciins 23 24 Technical Specifications tem Sub Item a Frequency 950 2150MHz Tuner Impedance 75 Ohm Symbol rate 2 45Mbps Modulation QPSK 8PSK Decoder Format MPEG4AVC H 264 HP L4 MPEG2MP ML HL 480i1 480p 576i 576p 720p 1 080i Output Format 1080p Output Port HDMI SCART MPEG 1 layer1 amp 2 amp 3 WMA i Decoder Format AC3 Coaxial L R SCART Video Audio Output 900 GB MP3 WMA JPEG BMP AVI Supported Media UJ N O U O O 3 D Q O A O D O rme lt A lt Supply Voltage 100 240V 50 60Hz Maximum Power Consump tion lt 25W Standby Power Consump tion lt 1W Weight _5 kg es Sze _ 168 x 95 x 38 mm SO E Notice about recycling Your product is designed and manufactured with high quality materials and components which can be Recycled and reused This symbol means that electrical equipment at heir end of life should be disposed of separately from your household waste Please dispose of this equipment at your local community waste collection recycling centre In the European Union there are separate collection systems for used electrical and electronic products Please help us to conserve the environment we live in Declaration
8. Digital High Defintion 230 12V Satellite Receiver ews User Manual Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Operate this product only from the type of power source indicated on the label If you are not sure of the type of power connected to your home consult your local power company Disconnect the unit from the mains before any maintenance or installation or oa a procedure 9 Protect the mains cord from damage and stress 10 Only use attachments accessories specified by the manufacturer 11 Unplug this apparatus during lightning storms or when unused for long periods of time 12 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way in cluding damage to the mains cord or plug if the unit has been ex posed to liquid or moisture has been dropped or is not operating correctly 13 Do not impede the air flow into the unit by blocking the ventilation slots 14 Attention should be drawn to the environmental aspects of battery disposal 15 Use the apparatus in moderate climate WARNING To reduce the risk of fire or electric shock do not expose this ap
9. Search To access the menu press MENU and select channel search using the LEFT RIGHT keys a Dish Setup After setup satellite dish you can search the DTV channels Select Dish Setup and press OK to start the Dish Setup Menu Scan a Satellite 1 Select the desired satellite in the satellite list and press the BLUE key to start a Channel Search Menu You can also add a new satellite by pressing the RED key 2 Select Scan Mode in Channel Search Menu 3 Press the OK key to start the channel search Scan a Transponder You can also scan a desired transponder Select the satellite first and then press the GOTO key to show the transponder list select the desired transponder and press the BLUE key to start the transponder scan Please see page 5 8 of this manual for more details b DB Management With this option you can save the channel list on a USB export or load the Channel list from the USB storage import 4 Time Setting a Time Offset Select auto or manual for GMT offset adjustments b Time Zone Select the Time Zone offset when Time Offset is set to manual c Date Set current date when Time Offset is set to manual d Time Set current time when Time Offset is set to manual e Auto Standby Set auto Standby time The unit will enter standby mode after the selected time without user interaction such as press remote control 5 Option To access the menu press MENU and select optional u
10. act position of your specific satellite can be found on www dishpointer com This means you must have a free view in southern direction when you stand behind the antenna Keep in mind that the antenna must never be mounted behind a balustra de a handrail or other obstacles such as trees Please make sure to mount the LNB correctly The following drawing will help you When searching the southern direction the position of the sun might help you During summer time the sun is exactly in southern position at 12 am noon and during winter at 1 pm 18 South East You must have this view when standing behind the antenna In this angle of 90 nearly all common satellite positions such as ASTRA1 19 2 E Eutelsat Hotbird 13 E and Turksat 42 E can be found Depending on which satellite you wish to receive there must be free sight without any obstacles in this angle This must especially be ensured with an installation on a wall Make sure that you can turn your antenna completely without having contact with the wall of your house before installing a corresponding wall bracket not necessarily included in the scope of supply Please note also that the antenna should be mounted in an angle of 90 to the wall After having made all relevant connections you can now start with the setup of the an tenna Please check again that the receiver is connected with the Easy Find LNB at the antenna and the receiver with your TV set
11. ction is deselected by pressing the red function key Signal strength and quality are displayed again Now optimise the antenna direction until you have reached the maximum value on the signal quality bar The value may vary according to the situation weather and signal strength However you should reach a minimum of 60 Exit the menu now by pres sing the EXIT key of your remote control Eighth step Please check once again if you are receiving the programme selected on the receiver Press the OK key of the remote control and then the 1 key You will see the general channel list All satellites Now check also if you can receive further channels of the set satellite The installation process is complete Troubleshooting roblem O power No DTV signal no sound from he speakers nly sound hat to do Power isn t connected Connect the power Retry scan DTV No search program program no or incorrect connection Connect the audio cable with audio cable correctly Please use a bigger Signal is too weak dish Turn off the mute Sound on mute unction Resoulution not supported Press V FORMAT button by TV set to change resolution No or incorrect connection Make sure cables are no image on the with AV cable connected correctly screen emote Control Press lt TV RADIO gt key The program is a radio to program shift into TV mode The battery is exhausted Change battery Remote Control is not
12. ecording follow the following steps hank Adhd Press the blue button on the remote Chantel Type TY Press the red button to add a schedule salen iis i Channa Hamo Das Erste HO Adjust the settings according to the schedule of Start Date MiDyY OS 2172013 the event Start End time record view etc Start Tima 15 09 Press OK button se aay Press EXIT button Made View You will be able to select from the following two options Mode View or Record If at anytime you wish to delete a scheduled event you can press the blue button to view the list of scheduled events Use the arrow keys on the remote to highlight the Event you wish to delete then press the blue button to delete it The recording files can be deleted on this unit You can go to the PVR and press the yellow button to delete it The TV program is recorded to file at mts format which can be played back on this unit and PC using a suitable player but cannot be played back on DVD or PDVD For recording high definition TV programs the version and speed of the USB device should Be 2 0 or above otherwise the unit may not record the HD programs correctly When recording to a USB stick or external Harddisc on this model you have to wait a few seconds before pushing rec after inserting the media Otherwise the unit can freeze in the signal If that happens then please take off the power and connect again to fix this Note We cannot guarantee compatibility ope
13. f up to 60 degrees The Remote Control will not operate if its path is blocked Sunlight or very bright light will decrease the sensitivity of the Remote Control System connection For a basic connection from your Set Top Box to your television set you can use the CVBS Adapter For a higher quality connection use a direct HDMI connection Connect an audio amplifier you have to use also the CVBS Adapter for L R Audio satellite Setting 1 Preparation You will have to know the following parameter to make a successful channel Scanning The satellite orientation If you have more than one antenna or one antenna with more than one LNB You will have to know which type of switch Toneburst od DISEqC is employs And to which port each Antenna LNB is connected For a Unicable SCR EN50494 you will have to Know which IF Channel is Available and its corresponding frequency Please ask the installer if any of the parameter is not known Example A satellite antenna orients satellite ASTRAS 19 2 and has a universal or Digital LNB We recommend the pre programmes list in this case If you would not like to use the pre programmed list the common setup for ASTRA 19 2 is as followed Satellite 019 2E Astra 1H LNB Type 09750 10600 N T LNB Voltage 13 18V naa ba Tite ETA TA MUT tone EAEAN 22KHz AUTO O63 028 28 KA ASTIA ZA Seg Lit Toneburst None nen a0 ME Ku Asta ta OFAI LNAI DiSEqC 1 0 None De nT EA PANT ae
14. he antenna in such a way that the LED diode changes to green without flashing This can only be the case with the satellite you have selected from the menu of the receiver Should it be impossible move your antenna in such a way that it is 1 flatter For this purpose pull at the top of the antenna towards your position A scale of vertical elevati on angles can help you in this process Flevation J Indicator J Flevation Nut Tick Marks Now return the antenna slowly to its initial position towards the south Then adjust the antenna once again so that it is 1 flatter pull it towards your position and move it again to the left in eastern direction Repeat these steps until the vertical elevation angle crosses the horizontal azimuth angle e g for ASTRA1 at 19 2 East and the LED diode on your Easy Find LNB shows a green light without flashing In case of digital satellite reception the receiver receives the transmission signal with a time lag Therefore turn the antenna very slowly and step by step 21 22 Seventh step As soon as you have found the selected satellite you will see the programme list of the set satellite on the screen and also the sound will be transmitted The installation via the Easy Find LNB is done now The current channel will be dis played Das Erste HD en eee CR eo Dee L SN i girn i ta La 14 TO Tageuechew ETRA LHL Eiji BP lng smagadi Frage Li The Easy Find fun
15. ime shift and Recording Time shift Press Time shift Pause key first then at any time you can press the Play key and the unit will start playing recorded programs from the start Press GOTO to select the playing time The Play time cannot exceed the current time Press Fast forward Fast back to move through the current recording Note Time shifting is only available when USB HDD is connected to the system and read write speed is high enough to support that Press Stop key the first time to end the playing mode The unit will keep recording but will return to current time If you press Pause the playback will start again from the beginning of the recording Press Stop key again to stop the recording Recording Press REC key The current program can then be recorded to the USB disc Press REC repeatedly to choose the recording time Press INFO key to see the recording information during the recording as below PYR Mode Disk total Space Disk Free Space File System Cluster Size File Name Max Record Size Max Record Time Record Bitrate Cur Play Size Cur Record Size Timer The most unique feature of the STB is its ability to record live TV There are two ways You can do this The first is to simply connect a USB storage device to your STB And press the record button on the remote The other way is to schedule a program to record using the blue button or from within the EPG menu To schedule a r
16. ind scan but There might be possible missing programs Please select blind scan It takes a little bit longer but will result in a Complete program list If you can have added a new satellite on the menu of Satellite setting please select blind scan for there is no transponder list available for the newly added satellite There is no blind scan option in case of an Unicable system Press the OK button to start the channel scan After the channel scan is completed a live picture of the first found channel will be shown on the screen Basic Operation 1 Program Manage settings To access the menu press the MENU button and select program Using the LEFT RIGHT Program keys to navigate through the menu The menu Bera provides options to adjust the Program Manage Settings Select an option and press Ok or RIGHT to adjust that setting Press the EXIT button to exit the menu a Program Edit To edit your program preferences lock skip favorite move or delete you will need to enter the Program Edit Menu This menu requires a password to access Enter the default password O00000 The master unlock password is 888888 b EPG electronic Program Guide The EPG is an on screen TV guide that shows scheduled programs seven days in advance for every tuned channel Press the EPG button on the remote control to access the guide You can use the UP DOWN key to select the preferred program If
17. of Conformity This product complies with the requirements of the following directives Electromagnetic Compatibility EMC Directive 2007 108 EC Low Voltage Directive LVD 2006 96 EC CE Marking Directive 93 68 EEC Energy Using Products Directive 2005 32 EC The above Directives declare that the DVB T Set Top Box B1602 isin Compliance with following standards EN55013 2001 A1 2003 A2 2006 EN61000 3 2 2006 EN61000 3 3 1995 A1 2001 A2 2005 EN55020 2007 EN60065 2002 A1 2006 ISO IEC 17025 COMMISSION REGULATION EC No 107 2009 25
18. paratus to rain or moisture WARNING The batteries shall not be exposed to excessive heat such as directsun light fire etc Warning e The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus The MAINS plug or an appliance coupler is used as the disconnect device the dis connect device shall remain readily operable The batteries shall not be exposed to excessive heat such as sunshine fire or the like CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR This symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit T This Symbol indicates that there are important operating and maintenance inst ructions in the literature accompanying this unit This Symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts When servicing use only identical replacement parts Package Contents Before installation please check the contents of the package The package should contain the following items 1 DVB S2 Receiver x1 pcs 2 Remote Control x1 pcs 3 AAA Battery for the Remote Control x1 pair 4 User Manual x1 pcs 5 12 230V Power Adapter x1 pcs 6 12V mobile Adapter x1 pcs 7 external Infrarot Sensor x1 pcs 8 CVBS Adapter x1 pcs Table of Contents Front and Rear
19. ration and or bus power with all USB mass storage devices and assume no responsibility for any loss of data that may occur when connected to this unit With large amounts of data it may take longer for the system to read the contents of a USB device Some USB devices may not be properly recognised Even when they are in supported format some files may not play or Display depending on the content Please use external AC DC power adapter if the current consumption of the USB device is larger than 500mA 16 Easy Find LNB in connection For the first time the Easy Find LNB enables the orientation of a satellite antenna wi thout the help of a second person or direct view on the TV set Also this LNB replaces orientation aids such as Sat Finder or other expensive measuring instruments The Easy Find LNB is not included in the scope of supply of the digital satellite recei ver Connection and rough direction of the antenna You must connect the antenna cable to the LNB before directing the antenna Please follow also the instructions in the operating manual of your satellite antenna The receiver should only be connected to the power supply after you have connected the antenna cable to the receiver If you have not mounted and directed your satellite system yet you must first find a suitable location for mounting the antenna Please make sure that the antenna is di rected correctly to the south Further information on the ex
20. sing the RIGHT LEFT Keys The menu provides options to adjust the OSD Language Subtitle Language and Audio Language Select an option and press RIGHT LEFT to adjust the setting Press EXIT to exit the menu a OSD On Screen Display Language Select an OSD Language b Subtitle Language Select the preferred subtitle language 11 12 c Audio Language Select the preferred audio language for watching TV channels If the language is not available the default program language will be used d Digital Audio If no sound is coming from the audio amplifier which is connected to the coaxial cable You can change this setting 6 System Setting a Parental Guidance Set the age for the parental control b Set Password Set or change the password for locked programs Enter your old password or the default password 000000 You will then be asked to enter your new password Press the Ok button to confirm your new password Once it is confirmed press EXIT to exit the menu The master unlock password is 888888 c Restore Factory Default You can cancel all settings and restore the factory default setting Note All settings will be deleted You will have to search the channel list once more d Information Display information of model SW and HM version e Recall list You can change the function of the Recall button If it is set off the Receiver displays the last program upon pressing the Recall b
21. there is more than one page information use the BLUE button for page up and the YELLOW button for page down u EEE e amp Ly ow a ee i Mog J we i Wa i fee a mp fa wie i ia You can select another channels s EPG by LEFT RIGHT buttons view details of each EPG event by INFO button or schedule a recording by OK button Please see page 16 of this manual for details in recording option c Sort Sort your channels from the following options Default Encrypt Freq Service name 2 Picture Setting To access the menu press MENU then select Picture using the RIGHT LEFT key The menu provides options to adjust the video settings Press UP DOWN to select an option and press RIGHT LEFT to adjust the setting Press EXIT to exit the menu Picture auto LOO a Aspect Ratio This setting defines the picture format of your TV and how the content with Different Aspect Ratio can be adapted for your TV b Resolution You can change the setting if the picture resolution doe not appear to be Correct This setting is to match the most common setting for HDMI 480i 480p for NTSC TV system 576i 576p for PAL TV system 720p 1080i 1080p for NTSC or PAL TV system c TV Format If the picture does not appear to be correct you an change this setting This should match the most common setting for TVs in your country NTSC for NTSC system TV PAL for PAL system TV 10 3 Channel
22. utton If it is Set on a list of programs seen at last will be displayed upon pressing Recall f Software Update Used for software update 7 USB To access the menu press the MENU button and select USB using the RIGHT LEFT keys The menu provides options to playback Music Photo and Multimedia files It can support AVI MP3 WMA JPEG and BMP formats Option a Multimedia When a USB device is attached you can select from the Music Photo Movie or PVR options in this menu using the RIGHT LEFT keys and OK to Select If a USB device is not connected the warning message No USB device Is Found will appear b Photo configuration Slide Time adjust slide show interval to 1 8 seconds Slide mode adjust slide show effect as mode 0 59 or random Aspect Ratio Keep Play picture in its original aspect Discard Play picture in full screen mode c Movie Configuration Subtitle Specific Select the subtitle size Available settings are Small Normal and Big Subtitle BG Select the subtitle background colour Available settings are transparent gray yellow green and white Subtitle Font Color Select the subtitle font color Available settings are white black red blue and green d USB PVR Configuration Recording Device Displays information of the connected USB storage device Format Formats of the connected USB device ATTENTION IT WILL DELETE ALL FILES 14 T
23. y the transponder of the chosen satellite Add new Transponder with the RED button and mark the transponder for channel scan With OK 3 Explanation of the parameters LNB Type define the oscillator frequency for your LNB Please take the Correct value from the manual of your LNB standard 09750 10600 If you have a Unicable SCR EN50494 select LNb type Unicable A or B Ais generally the correct choice by a Unicable system for satellite reception Choose a free channel IF channel and the corresponding frequency Please refer to the manual of your Unicable system LNB voltage This parameter defines the storm voltage of the antenna and the signal from the horizontal or vertical polarized transponder will be received The setting will only have to be changed in very rare cases A false setting will result in missing program or no signal reception at all standard 13 18V 22KHz The receiver can switch the LNB with 22KHz signals for the reception of another frequency band The setting will only have to be changed in very rare cases A false setting will result in missing program or no signal reception at all standard Auto Toneburst Toneburst switcher has two input ports It enables the connection of 2 antennas or LNB to the receiver If you have a Tone burst switcher you will have to select one of the both connections A or B for the satellite chosen on the left side DiSEqC DiSEqC switcher has up to 16 input ports It enables
Download Pdf Manuals
Related Search