Home

User Manual - GC-SAT

Contents

1. Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features Setup Menu Press the ENTER key to select The Digital Alarms Digital Alarms screen displays Factory Reset Firmware Version Digital Alarms Digital One Mode Digital One Timer Digital Two Mode Setting digital sensor mode The digital mode defines the parameters that must be broken before an alarm is raised Setting sensor timer threshold From the Digital Alarms screen use the arrow keys to navigate ey 57 r igi r r u rrow key vig Digital Alans Digital One Mode Digital One Timer Digital Two Mode to the digital mode setting for alarm 1 Digital One or alarm 2 Digital Two Press the ENTER key to select The alarm mode screen displays i Digital One Mode Normally Closed Normally Closed Normally Open Using the arrow keys navigate to the parameter required eg Not Installed Press the ENTER key to select Setting digital sensor timer The timer threshold defines the duration the mark parameter is not met before an alarm is raised Setting sensor timer threshold From the Digital Alarms screen use the arrow keys to navigate to the digital timer threshold setting for alarm 1 Digital One or alarm 2 Digital Two Press the ENTER key to select The alarm timer screen displays Flightcell DZM2 Operating Manual Firmware
2. gt gt Sat Isolated Emergency Mode NOTE When in the menu system the Flightcell DZM2 will automatically return to the Main Screen after 30 seconds unless another key is pressed Navigating the menu In the menu system press the EES EMER arrow keys to move up and down the menu options Press the quick key to move directly to the first item in the menu list Press the quick key to move directly to the last item in the menu list Selecting a menu option Main Menu Press the ENTER key to select a highlighted menu Flight Order Number option i fed Messages Messages Returning to the previous screen Press the CANCEL key to deselect a menu option and return to the previous screen Flightcell DZM2 Operating Manual Firmware v3 XX Page 16 of 95 Getting to know your Flightcell DZM2 Using the Flightcell DZM2 menu Altering a menu setting gt 6 Sat Volume CE arrow key to increase a setting eg a Press the volume or level setting Press the arrow key to decrease a setting eg a volume or level setting Saving a menu setting Press the ENTER key to save modified settings for a selected menu item Canceling a menu setting If a menu setting has not been saved Press the OR press the Exiting the menu END key to exit the menu system and return to the Main Screen Press the NOTE When in th
3. To check new settings have been applied click the button again to refresh existing settings displayed in the left column of the Audio Settings screen NOTE OTAC is not available for audio setting configuration E i Pare bok 7 ran ey ee ee ee I RE EE IN Flightcell DZM2 Operating Manual Firmware v3 XX Page 89 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility Configuring Subscriber Line Integrated Circuit SLIC settings for the optional cabin phone To configure the Flightcell DZM2 via a data connection At the bottom right of the SLIC Settings screen enter the serial number of the Flightcell DZM2 being configured HE Tees het from Local L m j DZM I button These To view existing settings for this Flightcell DZM2 click the will display in the left column of the SLIC Settings screen Enter new settings into the right column of the SLIC Settings screen ee Send to Local DZM To apply new settings to the Flightcell DZM2 click the I button eam gamme meg dn Tho erin ca DZM To check new settings have been applied click the button again to refresh existing settings displayed in the left column of the SLIC Settings screen NOTE OTAC is not available for SLIC setting configuration FG amn na a lecer Local DZM SLIC Steen JOBOOOI20 1 0 0 00 0 00001 8 7 3 1004 10240 omm Post Cosed 40014 Flightcell
4. Always Installer Menu Available Protection j Setup Menu Cancel Queued p44 p30 MAIN MENU Audio Menu p39 Received Compose Flight Ord ae 32 Messages Messages Tracking p34 p29 p27 Audio Menu Tracking Menu Setup Menu Sat Volume ICS Level DZM Antenna Diags Tracking Setup Auto Power On Installer p40 to ICS p73 p35 p53 p44 Password p78 Cell Volume MOSER Analog Alarms p41 DZM p74 y Sat Type p77 p79 Tracking Setup Sub Menu Aux Volume DZM Sidetone Enable Disable fi Cell Destination Digital Alarms p42 p75 p54 p63 ed UA p81 Sat MIC Gain GPS MSG Tones GPS Display Preferred Device ke Factory Reset p72 p76 Options p69 p64 p45 p83 Cell MIC Gain Keypad Tones Heading SBD Enable Backlight Mode Firmware p73 p76 Variation p56 p65 p45 Version p48 Heading Timer SBD Message LCD Contrast Language p57 Size p67 p46 Select p84 Periodic Timer Powerup Installer Menu p55 Message p68 p47 Manual Position AFF Settings p53 p70 Low Speed Emergency p58 Timer p68 Collective Altitude Switch p59 Threshold p61 Sat Destination Altitude Timer p62 p61 Flightcell DZM2 Operating Manual Firmware v3 XX Page 15 of 95 Getting to know your Flightcell DZM2 Using the Flightcell DZM2 menu Accessing the menu 9 Flightcell DZM2 EL Press the MENU key to enter the menu system SAT Idle
5. Analog Alarms ANLI Low Threshold ANL1 Threshold Timer Press the ENTER key to select The alarm low threshold screen displays Flightcell DZM2 Operating Manual Firmware v3 XX Page 79 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features ANL1 Low Threshold r Press the ea arrow key to increase the low threshold OR press the arrow key to decrease the low threshold NOTE Sensor thresholds are recorded as percentages of the possible maximum measurement Press the ENTER key to select Setting analog sensor high threshold The high threshold defines the maximum measurement permitted before an alarm is raised Setting sensor high threshold From the Analog Alarms screen use the arrow keys to navigate Analog Alarms to the high threshold setting for alarm 1 ANL1 or alarm 2 ANL2 ANL1 High Threshold ANL1 Threshold Timer ANL2 Low Threshold Press the ENTER key to select The alarm high threshold screen displays ANL1 High Threshold Pr EN a Press the arrow key to increase the high threshold OR press the threshold arrow key to decrease the high NOTE Sensor thresholds are recorded as percentages of the possible maximum measurement Press the ENTER key to select Flightcell DZM2 Operating Manual Firmware v3 XX Page 80 of 95 Flightcell DZM2 adva
6. Screen When dialing calls the following key functions are available DIGIT keys key CONNECT key ENTER key END key key key Press the 0 to 9 digit keys to dial a phone number Press and hold for the international dialing prefix for GSM and Iridium networks only page 19 Press to call a phone number that has been entered page 19 Press to call a quick dial number than has been selected page 20 Press to call a phonebook directory number that has been selected page 21 Press to answer an incoming call page 24 Press to dial a phone number that has been entered Press to end a call page 19 Use to enter symbol during a call when touch tone dialing is required page 23 Use to enter symbol during a call when touch tone dialing is required page 23 Flightcell DZM2 Operating Manual Firmware v3 XX Page 14 of 95 Getting to know your Flightcell DZM2 Using the Flightcell DZM2 menu Using the Flightcell DZM2 menu The menu system is used to access and configure a wide range of Flightcell DZM2 settings Menu Overview The Flightcell DZM2 menu layout is shown in the diagram below Refer to the page number displayed in brackets for more detailed information about each menu option NOTE Refer to Using the Installer Menu to protect advanced settings on page 47 for further information about how to protect critical settings gt KEY
7. Send to Local DZM button To check new settings have been applied click the gt GetfomboesMm button again to refresh existing settings displayed in the left column of the Tracking Settings screen To apply new settings to the Flightcell DZM2 click the OR Flightcell DZM2 Operating Manual Firmware v3 XX Page 87 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility To configure the Flightcell DZM2 via Over The Air Configuration OTAC At the top right of the Tracking Settings screen enter the Iridium satellite phone number and the serial number of the Flightcell DZM2 being configured Get from Remote DAM To view existing settings for this Flightcell DZM2 click the button These will display in the left column of the Tracking Settings screen If the new settings you have entered in the right column and the existing Flightcell DZM2 settings in the left column differ all differences will be highlighted yellow in the left column of the Tracking Settings screen Send to Remote DM To apply new settings to the Flightcell DZM2 click the button To check new settings have been applied click the Getto Renate DZM button again to refresh existing settings displayed in the left column of the Tracking Settings screen NOTE When using OTAC existing settings may take up to 30 seconds to display this is the time taken to send an SMS message to the Fli
8. DZM2 Operating Manual Firmware v3 XX Page 90 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility Configuring Clear Phonebook entries The Clear unencrypted Phonebook is managed via the Flightcell Configuration Utility only These settings cannot be changed directly through the Flightcell DZM console To configure the Flightcell DZM2 via a data connection Enter new or edit existing name phone number details into the Clear Phonebook screen To apply new settings to the Flightcell DZM2 click the button NOTE OTAC is not available for clear phonebook configuration Pe T EES TaT P Phoe Bok F Flightcell DZM2 Operating Manual Firmware v3 XX Page 91 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility Configuring Secure Phonebook entries The Secure encrypted Phonebook is managed via the Flightcell Configuration Utility only These settings cannot be changed directly through the Flightcell DZM console To configure the Flightcell DZM2 via a data connection Enter new or edit existing name phone number details into the Secure Phonebook screen Send to Local DZM button To apply new settings to the Flightcell DZM2 click the NOTE OTAC is not available for secure phonebook configuration Flightcell DZM2 Operating Manual Firmware v3 XX Page 92 of 95 APPENDIX B Installing and using the Fli
9. Flightcell DZM gt The world s most advanced all in one communications and tracking system Iridium satellite phone GPS flight following Audio MP3 integration FUEGO ENTRAR AISLAR OA slobaicom Unit 11 33 Riley Road Woodmead 27 11 6123660 sales gc sat com www gc sat com Operation Manual English General Aviation Unit FC 2306 www flightcell com Registered in U S Patent and Trademark Office Version history English General Aviation Manual Version history English General Aviation Manual Issue Date Author Description PCB Revision Issue 1 14 May 2009 A Whitlock Firmware 3 XX Document created F Flightcell DZM2 Operating Manual Firmware v3 XX Page 2 of 95 Contents Contents Version history English General Aviation Manual ax arnnnavnnnnnnnnnnnnnnannunnvnnnnnnnvnnnnnnnnnnnnnnnnvannnnnnnnnnnnnnenne 2 Flightcell DZM2 at a glaNCe rrnasvnnunnnannnnnnnnnnannnnnnnnennnnnnnnrnnnvnnnnennnvnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 6 Getting to know your Flightcell DZM2 rruurnanvvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnnnnnnnnnnnnnnnnvnnnnnnnnvnnenn 7 Switching the Flightcell DZM2 on and Off sccxssrccsinexszocsisedisiandfesecasisteeticadivensendincossseendeaesbiniionadenierdetendencnszendecevt 8 The UR eC DZM2 LCD een 9 The FUT TNS 12 Using the Flightcell DZM2 menu cscccesseccocceserccsececseccescesersessenecserecseccencesensencneucteceesec
10. Antenna Diags Antenna Diags Tracking Setup Press the ENTER key to select The Antenna Diags screen displays showing antenna GPS status signal to noise ratio and satellite information Antenna Diagnostics Waiting for lock SNR 42dB Hz satellites detected CANCEL key to return to the Tracking Menu END key to return to the Main Screen What does the antenna diagnostics information mean Antenna GPS status information is shown on line one of the display GPS Lock displays when there is a good GPS signal providing positioning information Waiting For Lock displays after the Flightcell DZM2 has recently been re powered and is calculating or waiting for sufficient signal before providing position information Even under good conditions it may take up to 2 minutes to acquire a GPS lock or 15 minutes the first time the Flightcell DZM2 is used in a different hemisphere Signal to noise ratio SNR shows on line two of the display in numerical and graphical form This provides the average strength of the five best incoming satellite signals or an average of all visible satellites if there are fewer than five Normal SNR value is around 40db Hz A minimum of 30db Hz is usually required to obtain a GPS lock Low values are usually due to weak signals from satellites which can be caused by some sort of physical obstruction Low values can also be caused by excessive electrical noise being
11. Press to answer an incoming call page 24 Press to send current GPS position data for a point of interest page MARK key 25 When on a phone call press and hold this key to activate this function AFF key Press to start and stop Automated Flight Following AFF page 37 EMERGENCY Press and hold to start and stop an emergency distress signal page key 25 Press to enter a phone number to dial from the satellite phone page DIAL SAT key 19 DIAL CELL key Press to enter a phone number to dial from the cell phone page 19 Press to terminate a phone cal page 19 I END key l Press to undo last action and return to the Main Screen MR1 key Press to dial the phone number saved as quick dial 1 page 20 MR2 key Press to dial the phone number saved as quick dial 2 page 20 Flightcell DZM2 Operating Manual Firmware v3 XX Page 12 of 95 Getting to know your Flightcell DZM2 MR3 key MESSAGES key DIRECTORY key ISOLATE key CANCEL key MENU key ENTER POWER key The Flightcell DZM2 keypad Press to dial the phone number saved as quick dial 3 page 20 Press to view received messages page 29 When on a phone call press and hold this key to activate this function Press to select a number from the phonebook directory page 21 When on a phone call press and hold this key to activate this function Press to isolate mute audio between the Flightcell DZM2 and the Satel
12. message at the bottom of the screen advises what collective switch position the Flightcell DZM2 senses Press the ENTER key to save You are returned to the Tracking Setup sub menu NOTE Manual GPS data will be transmitted regardless of Collective Switch settings This allows positions to be marked while on the ground or hovering in a helicopter Flightcell DZM2 Operating Manual Firmware v3 XX Page 60 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Setting automatic GPS transmission based on altitude change The Flightcell DZM2 can be set to automatically transmit current GPS position to an authorized recipient destination whenever the aircraft has a sudden descent Altitude Threshold The Altitude Threshold defines the rate by which the aircraft s altitude must change in order to trigger an automated GPS transmission For example if the Altitude Threshold is set to 1000 meters per second any altitude descent less than 1000 meters per second will not generate an automated GPS transmission Setting the Altitude Threshold From the Tracking Menu use the arrow keys to navigate to j Tracking Tracking Setup Tracking Setup ENTER key to select The Tracking Setup E Tracking Setup Altitude Threshold Altitude Timer ENTER key to select The Altitude Threshold Altitude Threshold Press the sub menu displays
13. Flightcell DZM2 Operating Manual Firmware v3 XX Tracking Tracking Setup Tracking Setup AFF Settings Emergency Timer Altitude Threshold AFF Settings Page 70 of 95 Flightcell DZM2 advanced setup guide Configuring advanced audio settings Press the ENTER key to save 0 MENU CANCEL OR press the MENU or CANCEL keys to K abort the change Flightcell DZM2 Operating Manual Firmware v3 XX Page 71 of 95 Flightcell DZM2 advanced setup guide Configuring advanced audio settings Configuring advanced audio settings Various advanced audio settings may be adjusted for the Flightcell DZM2 and connected devices These are described in the following sub sections NOTE Refer to Controlling audio settings on page 39 for further information about controlling basic audio settings during flight Setting satellite phone MIC gain Satellite phone MIC gain is audio from the Flightcell DZM2 going out to the connected satellite phone The satellite phone MIC gain may be adjusted on the Flightcell DZM2 AN The following MIC gain settings have dramatic effect on the way your Flightcell Dzmm operates Adjust MIC gain settings only with extreme caution Altering the satellite phone MIC gain on the Flightcell DZM2 From the Audio Menu use the arrow keys to navigate to Sat MIC Gain Audio Menu Sat Mic Gain Aux Volume evel DZM gt ICS Pr
14. Keypad Tones ENTER key to select The GPS MSG Tones GPS MSG Tones Press the screen displays Using the arrow keys navigate to the keypad mode required eg On Press the Audio Menu ENTER key to save You are returned to the Switching keypad tones on and off Flightcell DZM2 keypad tones may be switched on or off as required Keypad tones are the sounds that are emitted when keys on the Flightcell DZM2 are pressed Turning keypad tones on and off From the Audio Menu use the arrow keys to navigate to Keypad Audio Menu Tones Keypad Tones Press the ENTER key to select The Keypad Tones mr screen displays Keypad Tones Using the arrow keys navigate to the keypad mode required eg On Press the Audio Menu ENTER key to save You are returned to the Flightcell DZM2 Operating Manual Firmware v3 XX Page 76 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features Configuring other Flightcell DZM2 advanced setup features This section describes how more advanced Flightcell DZM2 settings may be configured using the Setup Menu NOTE Refer to Using Flightcell DZM2 common setup features on page 44 for further information about configuring common setup features using the Setup Menu Setting satellite phone type To send audio and data over the satellite network the type o
15. Password Installer Password Crypto Settings Analog Alarms Press the ENTER key to select The Installer Password screen displays N Installer Password Enter the new 4 digit password pin Flightcell DZM2 Operating Manual Firmware v3 XX Page 78 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features Press the ENTER key to save A Pin Updated Pin Updated displays Using analog alarms for monitoring The Flightcell DZM2 provides two general purpose analogue sensor inputs When installed these sensors monitor against minimum maximum and duration parameters configured by the user When the parameters are exceeded the Flightcell DZM2 transmits your current GPS position and alarm message to a specified destination Accessing analog alarms Accessing Analog Alarms From the Setup Menu use the arrow keys to navigate to Analog Setup Menu Alarms Analog Alarms Digital Alarms Factory Reset Press the ENTER key to select The Analog Alarms screen displays Analog Alarms ANL Low Threshold ANLAT Threshold Timer Setting analog sensor low threshold The low threshold defines the minimum measurement permitted before an alarm is raised Setting sensor low threshold From the Analog Alarms screen use the arrow keys to navigate to the low threshold setting for alarm 1 ANL1 or alarm 2 ANL2
16. Use the arrow keys to navigate to Altitude Threshold Press the screen displays Fal MES Press the ri oh arrow key to increase the altitude threshold OR press the threshold arrow key to decrease the altitude Press the ENTER key to select and save You are returned to the Tracking Setup sub menu Altitude Timer The Altitude Timer defines how soon after each altitude descent the next GPS position transmission will be automatically transmitted Setting the Altitude Timer From the Tracking Menu use the arrow keys to navigate to Tracking Setup Flightcell DZM2 Operating Manual Firmware v3 XX Page 61 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Tracking I ENTER key to select The Tracking Setup Tracking Setup Press the E sub menu displays Use the arrow keys to navigate to Altitude Timer Tracking Setup ENTER key to select The Altitude Timer Altitude Timer Press the screen displays ka 7 i Press the a arrow key to increase the automated altitude Altitude Timer descent time interval OR press the arrow key to decrease the automated altitude descent time interval NOTE The minimal Altitude Timer interval is 30 seconds Press the t ENTER key to select and save You are returned to the Tracking Setup sub menu Checking satellite messag
17. arrow keys to navigate to Cell Destination Flightcell DZM2 Operating Manual Firmware v3 XX Page 63 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Tracking Setup Cell Destination Preferred Device SBD Enable Press the t ENTER key to select The Cell Destination screen displays current setup Cell Destination 0276717300 Finding messaging destination addresses The messaging destination addresses for some commonly known tracking providers are detailed below If your tracking service provider is not listed here contact your provider directly to request the appropriate messaging destination addresses Tracking Provider Cellular Network Satellite Network SMS Destination SMS Destination SBD Destination Guardian MapTracks Not available fcQbo gways1 com tcp gways1 com 9100 New Zealand Telecom 027 6717300 027 6190359 TrackPlus New Zealand Vodafone in dzm daestra com service daestra com 11002 021 02574831 Australia 61 427 767958 Flight Explorer using SatCom Direct 3PDI Not available fc fdfmail com 63 144 240 225 10800 Setting preferred messaging device The Flightcell DZM transmits GPS position and custom flight information using SMS or SBD messaging over Satellite and cellular networks Messages are queued and transmitted using a device with adequate signal strength If both the satellite and cellular networks have adequate signa
18. backlight brightness From the Setup Menu use the arrow keys to navigate to a j i Setup Menu Backlight Brightness Backlight Brightness Backlight Mode LCD Contrast ENTER key to select The Backlight Brightness screen displays Press the Backlight Brightness Using the arrow keys navigate to the mode required eg Ext Control 0 28 VDC EXT Control 0 5SVAC EXT Control 0 28VDC NOTE The first 2 EXT options may be used when the High Flightcell DZM2 is connected to aircraft dimmer control Alternatively use the High Medium and Low options to set backlight brightness levels Press the ENTER key to save You are returned to the Setup Menu Setting backlight mode The Flightcell DZM2 LCD display backlight mode may be customized Backlight mode options The following LCD display backlight mode options are available Always On The backlight will remain on at all times when the Flightcell DZM2 is on Keypad Timeout The backlight will switch on only when a key is pressed It will remain on for 15 seconds Always Off The backlight will remain off at all times Flightcell DZM2 Operating Manual Firmware v3 XX Page 45 of 95 Flightcell DZM2 operator s guide Using Flightcell DZM2 common setup features Setting the backlight mode From the Setup Menu use the arrow keys to navigate to Backlight Mode setup Menu Backlight Mode LCD Co
19. has not been received No further automated attempts are made NOTE Refer to Using automated flight following AFF on page 37 for further information about AFF Emergency Mode flashes at the bottom of the Main Screen when in Distress Emergency mode NOTE Refer to Sending an emergency distress signal on page 25 for further information about Distress Emergency mode The Menu Screen displays when you are accessing the Flightcell DZM2 menu system The menu system is used to view and configure Flightcell DZM2 Main Menu Flight Order Number settings I I lei j i A B NOTE Refer to Using the Flightcell DZM2 menu on page Received M ssages 15 for further information about using the menu Compose Messages Flightcell DZM2 Operating Manual Firmware v3 XX Page 11 of 95 Getting to know your Flightcell DZM2 The Flightcell DZM2 keypad The Flightcell DZM2 keypad ES DIAL SAT The keypad on the Flightcell DZM2 English General Aviation unit has various functions as described below Refer to each page number in brackets for further information about the key function When the Main Screen displays each key has a quick key function Press to call a phone number that has been entered page 19 Press to call a quick dial number than has been selected page 20 CONNECT key Press to call a phonebook directory number that has been selected page 21
20. keys to navigate to Sat Destination Tracking Setup 9 ENTER key to select The Sat Destination Sat Destination screen displays current setup SBD Enable SBD Message Size Press the Sat Destination data tracking com Checking cellular messaging destination The recipient destination for messages sent over the cellular network must be specified This is critical to the delivery of tracking mapping and other data to appropriate parties Messages are usually sent to a central ground data server which follows pre configured rules to distribute any received data appropriately The satellite messaging destination is set using the Flightcell Configuration Utility However you may check satellite messaging destination settings directly from the Flightcell DZM2 console as described below NOTE Refer to APPENDIX B Installing and using the Flightcell Configuration Utility on page 86 for further information about the Flightcell Configuration Utility NOTE The Flightcell DZM currently supports WaveCom GSM Maxon CDMA and MultiTech CDMA cell phone modems Cellular messages may be sent to other phones supported by the network provider For users who have a cellular connection with Vodafone New Zealand cellular messages may also be sent to an email address Specifying cellular messaging destination Tracking 2 Press the ENTER key to select The Tracking Setup Tracking Setup se O Use the
21. only be viewed and edited by first entering the Installer Password NOTE Refer to Updating Installer Menu password on page 78 for further information about the Installer Password Which settings are protected by the Installer Menu Refer to the Menu Overview on page 15 to see which settings are protected by the Installer Menu Enabling or disabling Installer Menu security From the Setup Menu use the arrow keys to navigate to J Setup Menu Installer Menus Installer Menu Installer Password Crypto Settings Press the ENTER key to select The Installer Menu screen displays Installer Menu Enter the Installer Password NOTE Refer to Updating Installer Menu password on page 78 for further information about the Installer Password NOTE Pin Invalid will display when the incorrect password is entered Installer Menu Using the arrow keys navigate to the Installer Menu security mode required On will display the full extended menu options including critical settings Off will display the standard menu options only No critical settings may be accessed or altered Press the ENTER key to save Flightcell DZM2 Operating Manual Firmware v3 XX Page 47 of 95 Flightcell DZM2 operator s guide Using Flightcell DZM2 common setup features Identifying firmware version and serial number The Flightcell DZM2 firmware version and serial number may be identi
22. text messaging Using text messaging The Flightcell DZM2 uses text messaging functionality to Receive text messages sent from the Iridium satellite network or by email Transmit flight order number information NOTE Refer to Sending flight order number information on page 32 for further information about transmitting flight order number information Transmit GPS position data NOTE Refer to Using GPS tracking on page 34 for further information about transmitting GPS position data NOTE Other types of text messages may be created and transmitted using a laptop computer or PDA connected to the Flightcell DZM2 Using the Received Messages screen The last 30 text messages received will remain in the Received Messages memory The most recent message will have the lowest message number NOTE The oldest message will be replaced when the next new message is received Messages cannot be deleted manually STEP 1 Accessing the Received Messages screen MESSAGES key OR press the MENU key to enter the menu system The Main Menu displays Using the arrow keys navigate to Received Messages Press the ENTER key to select The Received Messages screen displays STEP 2 Viewing received messages From the Received Messages screen use the arrow keys to navigate to the required message Please return to base for reassignment Time GMT Press the ENTER key to s
23. the GPS position NOTE Refer to Sending message codes on page 26 for further information about sending coded messages Press the ENTER key to select and save You are returned to the Tracking Menu Enabling disabling and suspending automated GPS tracking You may define whether or not automated GPS tracking may be used on the aircraft or vehicle By default GPS tracking is enabled unless manually overridden NOTE Refer to Configuring GPS tracking on page 51 for further information about important settings that need to be configured before GPS data will be transmitted Enabling disabling or suspending GPS tracking From the Tracking Menu use the arrow keys to navigate to Tracking NY Tracking Setup Tracking Setup ENTER key to select The Tracking Setup sub menu displays Press the Use the arrow keys to navigate to Enable Disable Flightcell DZM2 Operating Manual Firmware v3 XX Page 54 of 95 Flightcell DZM2 advanced setup guide Press the ENTER key to select The Enable Disable screen displays Using the arrow keys navigate to the GPS tracking setting required Tracking On enables GPS tracking to be used Tracking Suspend disables GPS tracking for the current flight mission only GPS will automatically be re enabled when the Flightcell DZM2 is next powered up Tracking Off disables GPS tracking until it is manually re enabled Press t
24. to press and hold the ISOLATE key to reinstate phones Setting auxiliary device audio volume External audio devices eg music players may be connected to the aircraft or vehicle s intercom interphone system ICS via the Flightcell DZM NOTE This is dependent on provision being made for the connection of an external audio device by your engineers Altering the auxiliary volume From the Audio Menu use the arrow keys to navigate to Aux Audio Menu Volume a Press the ENTER key to select The Aux Volume screen displays Aux Volume FI gt MR Press the arrow key to increase the auxiliary volume Flightcell DZM2 Operating Manual Firmware v3 XX Page 42 of 95 Flightcell DZM2 operator s guide Controlling audio settings OR press the arrow key to decrease the auxiliary volume NOTE 0 is the lowest volume 100 is the highest volume 22 is the default Press the ENTER key to save You are returned to the Audio Menu Flightcell DZM2 Operating Manual Firmware v3 XX Page 43 of 95 Flightcell DZM2 operator s guide Using Flightcell DZM2 common setup features Using Flightcell DZM2 common setup features This section describes how common Flightcell DZM2 settings may be configured using the Setup Menu NOTE Refer to Configuring other Flightcell DZM2 advanced setup features on page 77 for further inf
25. transmit GPS data Press the ENTER key to save You are returned to the Tracking Setup sub menu NOTE Automatic GPS transmission occurs the defined number of minutes after the last GPS transmission If the last transmission was sent using manual transmission the next automated transmission will occur the defined number of minutes after the manual transmission was sent Setting automatic GPS transmission based on heading change The Flightcell DZM2 can be set to automatically transmit more frequent GPS positions to an authorized recipient destination whenever the aircraft changes its heading or turns Heading Variation Angle The Heading Variation defines the angle by which the aircraft s heading direction must change in order to trigger an automated GPS transmission For example if the Heading Variation is set to 10 degrees any direction changes less than 10 degrees will not generate an automated GPS transmission Setting the Heading Variation From the Tracking Menu use the arrow keys to navigate to Tracking Tracking Setup Tracking Setup ENTER key to select The Tracking Setup C sub menu displays Press the Use the arrow keys to navigate to Heading Variation Press the ENTER key to select The Heading Variation screen displays Flightcell DZM2 Operating Manual Firmware v3 XX Page 56 of 95 Flightcell DZM2 advanced setup guide gt
26. volume 50 is the default volume Press the ENTER key to save You are returned to the Audio Menu Isolating muting phones Mute the audio between the Flightcell DZM and connected cell and satellite phones using the Isolate Phones function When isolated there is no audio output to the phones and incoming audio volume from the phones is reduced This means the crew can hold a private discussion while still being able to hear the party on the other end of the phone link Keypad tones if enabled and incoming audio from auxiliary audio devices are still audible NOTE Refer to Switching keypad tones on and off on page 76 for further information about keypad tones Refer to Setting auxiliary device audio volume on page 42 for further information about auxiliary audio devices STEP 1 Isolating muting phones Flightcell DZM2 Operating Manual Firmware v3 XX Page 41 of 95 Flightcell DZM2 operator s guide Controlling audio settings Flightcell DZM2 ISOLATE quick SAT Idle key Cell Sat Isolated displays on the Main Screen when gt gt Sat Isolated phones are isolated When in the Main Screen press the NOTE When on a phone call you need to press and hold the 9 150 ISOLATE key to isolate phones STEP 2 Reinstating full phone audio From the Main Screen press the ISOLATE quick key to reinstate full phone audio NOTE When on a phone call you need
27. volume on the handset is set to above halfway STEP 2 Altering the satellite phone audio volume on the Flightcell DZM2 From the Audio Menu use the arrow keys to navigate to Sat Audio Menu Volume sat Volume Sat Mic Gain Aux Volume Sat Volume 10 Press the ENTER key to select The Sat Volume arrow key to increase the sat phone volume screen displays yi Press the eS OR press the arrow key to decrease the sat phone volume NOTE 0 is the lowest volume 100 is the highest volume 10 is the default volume Press the ENTER key to save You are returned to the Audio Menu Setting cell phone audio volume Flightcell DZM2 Operating Manual Firmware v3 XX Page 40 of 95 Flightcell DZM2 operator s guide Controlling audio settings Cell phone phone audio is sound from the cell phone device being received into the Flightcell DZM2 Audio from the satellite phone may be adjusted on the Flightcell DZM2 Altering the cell phone audio volume on the Flightcell DZM From the Audio Menu use the arrow keys to navigate to Cell Audio Menu Volume Cell Volume Aux Volume Sat MIC Gain Press the ENTER key to select The Cell Volume screen displays Cell Volume Press the OR press the arrow key to decrease the cell phone volume NOTE 0 is the lowest volume 100 is the highest
28. 0 byte minimum message charge by your satellite network provider By selecting Maximum Information each message will be approximately 32 bytes so will cost around 10 more to transmit Specifying SBD message size From the Tracking Menu use the arrow keys to navigate to Trackin g Tracking Setup Tracking Setup ENTER key to select The Tracking Setup sub menu displays ee Tracking Setup 5BD Message Size Powerup Message Press the Use the arrow keys to navigate to SBD Message Size Backlight Brightness Press the ENTER key to select The SBD Message Size screen displays SBD Message Size Using the arrow keys navigate to the mode required eg Minimum Information Minimum Information Maximum Information Press the ENTER key to save You are returned to the Setup Menu Flightcell DZM2 Operating Manual Firmware v3 XX Page 67 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Setting time interval for alert messaging You may define the time interval that emergency distress and under fire alert signals are transmitted by the Flightcell DZM2 Setting the emergency timer From the Tracking Menu use the arrow keys to navigate to Tracking Setup Tracking ENTER key to select The Tracking Setup Tracking Setup Press the sub menu displays Use the arrow keys to navigate to Emergency Ti
29. 6 MRS Press the angle arrow key to increase the heading variation OR press the variation angle 4 arrow key to decrease the heading NOTE The Heading Variation may be set between 2 and 90 degrees The default is 10 degrees Press the ENTER key to select and save You are returned to the Tracking Setup sub menu Heading Variation Timer Configuring GPS tracking Tracking Setup Heading Variation The Heading Timer defines how soon after each heading direction change the next GPS position transmission will be automatically transmitted For example an aircraft that is circling is constantly changing heading direction so the time period between automated GPS transmissions may be defined using the Heading Timer Setting the Heading Variation Timer From the Tracking Menu use the arrow keys to navigate to Tracking Setup Press the ENTER key to select The Tracking Setup sub menu displays Use the arrow keys to navigate to Heading Timer Press the ENTER key to select The Heading Timer screen displays TS Press the arrow key to increase the automated heading variation time interval OR press the heading variation time interval Flightcell DZM2 Operating Manual Firmware v3 XX arrow key to decrease the automated Tracking Tracking Setup Tracking Setup heading Timer P
30. AEAEE T E AE 44 SOHO DIKI DAINU TOSS orasi ae EAEI ONN EEEE OA AEAEE OTOT 45 SET DININ TOTE EEE ENE EE 45 SENO LECO CONU GC TETEN ee eee ER eee ee 46 Using the Installer Menu to protect advanced Settings wisssscccnnsccnnnnennnnnenneneeneeeenneeeneneenn nr EEA enn ENA S raneren anenn 47 Identifying firmware version and serial UNIDOS vassssecccsescncenennnnscnensnnensnnnseanensnnanencnnnsstanensansnssesessanessanssens 48 Flightcell DZM2 advanced setup guide sruuunnsvunnnnvnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnennnnnnennnnnnvnnnnnnnnnnnnnnnnnnnv vennen 49 Configuring your Iridium satellite phone ssicsdecnscandataatant drcnwenteniadenad Guaeauttnnsisnanetanenennsialeasaranpaianaia Seineeuadananeeas 50 Overmiadmng satele phone amenna TOCK vassverk 50 Configuring satellite phone service center Number issseccneecnnncnnnnnsnnccnnsnnessnunsnnsanenanansanenanansannsnnasssunsnansasaags 50 TI CUE GPS ge EEE EE EEE 51 ACCESSING 10 01802 0 1 GERE 55 Enabling and disabling manual GPS tracking assccsecccnvncenneneeneneenneeen aner reser eee eH rann EEAEE endr ndnn ener EEE EEE EEE EE DEES 55 Enabling disabling and suspending automated GPS tracking usrssccssccneccnscccsesenensssuscsnscnsessesensesnsnsssesssenssans 54 Setting automatic GPS transmission based on time WLCIVA viscseccnscccnucenenensusnnensnsnssansennsnsnsenensnensnsessnenssans 55 Setting automatic GPS transmission based on heading Change rrausarrnnarrnnnnrnnnnrnnnnnennnrr sner sanerrnnrrrnnner eneren 56 Set
31. Arrow keys are used for navigating menus CANCEL MENU View received Undo last action Access menus to Power DZM 2 text messages Delete numbers edit settings on and off Numeric keys may or text be used for phone dialling Vent patch to equalize internal pressure Serial number Main connector 55 PIN D38999 24WE GPS antenna 35AN connector TNC Flightcell DZM2 Operating Manual Firmware v3 XX Page 6 of 95 Getting to know your Flightcell DZM2 Getting to know your Flightcell DZM2 Learn how to Switch your Flightcell DZM2 on and off Read the Flightcell DZM2 LCD display Use the Flightcell DZM2 keypad Use the Flightcell DZM2 menu Flightcell DZM2 Operating Manual Firmware v3 XX Page 7 of 95 Getting to know your Flightcell DZM2 Switching the Flightcell DZM2 on and off Switching the Flightcell DZM2 on and off Switching the Flightcell DZM2 on If Auto Power On is enabled the Flightcell DZM2 will automatically switch on when power supply is connected OR to switch on manually press the ENTER key once NOTE If Auto Power On is disabled you will need to press the ENTER key to switch on manually NOTE It may take a few seconds for the Flightcell DZM2 to switch on Switching the Flightcell DZM2 off de Power Off If Auto Power On is enabled the Flightcell DZM2 will Powering Down automatically switch off when po
32. Cell Phone Press the ENTER key to save You are returned to the Setup Menu Enabling messaging modes To transmit GPS position data using a satellite phone messaging modes need to be selected The diagram below shows the different messaging modes available on the Flightcell DZM2 listed in order of ascending cost Your Iridium satellite phone can use 2 different transmission modes to send data Short Burst Data SBD and Short Message System SMS SBD is the default mode as it is usually clearer faster and more economic than SMS However if you are only flying a small number of hours SMS may be more economic NOTE Please confirm the most cost effective mode for your operation with your network service provider Flightcell DZM2 Operating Manual Firmware v3 XX Page 65 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Short Burst Data SBD SAT PHONE Short Massaging Service SMS Setting up transmission via the satellite network From the Tracking Menu use the arrow keys to navigate to if Trackin g w Tracking Setup Tracking Setup Press the ENTER key to select The Tracking Setup sub menu displays Tracking Setup SBD En able Use the arrow keys to navigate to SBD Enable ar Message Press the ENTER key to select The SBD Enable screen displays l l o SBD Enable Using the arrow keys navigate to the mode require
33. ENTER key to select The Tracking Setup sub menu displays Use the arrow keys to navigate to Powerup Message Press the ENTER key to select The Powerup Message screen displays Using the arrow keys navigate to the powerup mode required eg On Press the ENTER key to save You are returned to the Tracking Setup sub menu Tracking Tracking Setup Tracking Setup Powerup Message Backlight Brightness PhoneBook Settings Powerup Message NOTE When aircraft is powered up a powerup message will not be sent immediately as it cannot be transmitted until a valid GPS lock is obtained Setting GPS display options You may set your current GPS position to display at all times at the top of the Flightcell DZM2 Main Screen By default onscreen GPS position is switched off unless manually overridden Setting GPS display options From the Tracking Menu use the arrow keys to navigate to Tracking Setup Press the ENTER key to select The Tracking Setup sub menu displays Use the arrow keys to navigate to GPS Display Options Press the ENTER key to select The GPS Display Options screen displays Flightcell DZM2 Operating Manual Firmware v3 XX Tracking Tracking Setup Tracking Setup GPS Display Options Heading Variation Heading Timer Page 69 of 95 Flightcell DZM2 advanced setup guide Use the arrow k
34. GPS position reports based on specified factors Flightcell DZM2 Operating Manual Firmware v3 XX Page 25 of 95 Flightcell DZM2 operator s guide Sending alert signals position reports and message codes Manually transmitting GPS position L MARK quick key to send current GPS position data to an authorized recipient From the Main Screen press the Message Queued destination The SMS Queued screen displays before returning to the Main Screen Sending message codes The Flightcell DZM2 can attach special message codes to manual GPS position reports Each of the codes from code 001 to code 255 can be used to designate a specific situation report Only the 3 digit code itself is transmitted when this code is selected on the Flightcell DZM2 the corresponding message is shown When the message is received on the ground the message code is used to retrieve the message from a database There are 2 methods that may be used to do this NOTE Manual position must be enabled to manually transmit your GPS position Refer to Enabling and disabling manual GPS tracking on page 53 for further information about enabling and disabling various manual position sending modes NOTE Message codes available for use may be customized using the Flightcell DZM Configuration Utility Refer to APPENDIX B Installing and using the Flightcell Configuration Utility on page 86 for further information about th
35. LL DZM o o gt ICS to E hone INTERCOM DZM Audio HAL cain INTERPHONE CELL PHONE SYSTEM ICS Auxiliary Device Audio Volume AUXILIARY AUDIO DEVICE Accessing the Audio Menu Audio settings are configured using the Audio Menu Accessing the Audio Menu Press the MENU key to enter the menu system The Main Menu displays Using the arrow keys navigate to Audio Menu Press the ENTER key to select The Audio Menu displays Flightcell DZM2 Operating Manual Firmware v3 XX Page 39 of 95 Flightcell DZM2 operator s guide Controlling audio settings Setting the satellite phone audio volume Satellite phone audio is sound from the satellite phone device being received into the Flightcell DZM2 Audio from the satellite phone may be adjusted on both the Flightcell DZM2 and the satellite phone connected to it Audio volume on the Iridium phone should be set to half way or below and the DZM2 controls used to adjust sat phone volume to the aircraft audio system NOTE Do not adjust volume on the satellite phone handset to above halfway or an undesirable echo will be heard by the party on the other end of the phone link STEP 1 Altering the satellite phone audio volume on the handset Adjust audio volume using the Up and Down buttons to the left of the LCD display For best performance set the volume on the satellite phone handset to 3 NOTE Undesirable echo occurs when
36. MENU key to enter the international dialing prefix GSM and Iridium networks OR press the 0 key where the 0 number is required Use the CANCEL key to delete backspace any digits entered if required The phone number entered will display Flightcell DZM2 Operating Manual Firmware v3 XX Page 19 of 95 Flightcell DZM2 operator s guide Making and answering calls OR press the amp DIAL CELL keys followed by the ENTER key to redial the last number called STEP 3 Dialing the number R Flightcell DZM2 CONNECT Press the CONNECT key to dial the number The phone SAT Calling status on the Main Screen displays Calling When the call is 64354491 7 connected the phone status displays On Call NOTE It may take up to 30 seconds for the satellite phone ois being called to respond Flightcell DZM2 NOTE If the call is canceled before connection the phone SAT On Call 64354491 2 status displays Disconnecting before returning to Idle STEP 4 Terminating the call Flightcell DZM2 Press the END key to terminate a call at any time The SAT ldle phone status returns to Idle NOTE The call will also be terminated if the party at the other end of the audio link hangs up Making a call using quick dial You may manually enter phone numbers into the Flightcell DZM2 to make an audio call STEP 1 Selecting to make a clear or secu
37. NG samene 30 Sending flight order number INFORMA ON as rss bGiad nise 32 Recording and transmitting flight order Number m rrrurrrr nnrr nnrr ser nnee nn ener nern ann EEDEAEEEAE EEDA TE ener EEE SEH EEE EE DEES 32 Usina GPS ee 34 Manually asian GPS POSITON ERE NE ER 34 Automatically transmitting GPS position iscceuccrucnnuscanscensnsannannennnansensnansenenscanecausnsnaecansannansensannsciassseassasaes 34 OSING GPS AEE GAG NOSUCS eden 35 Flightcell DZM2 Operating Manual Firmware v3 XX Page 3 of 95 Contents Using automated flight following AFF scesetsadsinexatnaacagiinenavassanesadeuictoenseduntunnntinagaicerererdepiauanauaagnieeeecsiansaaaeins 37 Registering AFF mission Start and ENG DOMME xeric cincweseswececuakeny innen Eiei AREA EREA EADAE KERALA ES EERE 37 Controlling Melb le ogi en g a EE NE ee ener ees 39 ACCESSING MEO AUTIO MONU ee 39 Setting the satellite phone audio VOIUTIC ssscsscnsnunnnecnnunsnnnsnnunnnannannennnnnaansanesannsnansnnannnansannsnnanseunsnnasanansqins 40 Setting CCl Phone Audio WOE SEE EEE EE LEEA 40 Loung CIO POS EE EE EEE nas ater nein eco ena taco oman meta AAE 41 Setting auxiliary device audio VOMUTIC aan taeancieneitans EGEDE BER 42 Using Flightcell DZM2 common setup features cccecccccesecesccceeseceesceeeacceeacenseceueecceueceeeeeeessenaveneascaneseeaseeesy 44 PCCESSING TIC NPE ERREN E EAEE TAE EEEE E ITERE EEEE EN RA 44 USING AUD FONEF ON ariari a EEEE A AE A EEE AE A EES E A EAA ETEA AT
38. PS position may be manually transmitted to an authorized recipient destination NOTE Refer to Configuring GPS tracking on page 51 for further information about important settings that need to be configured before GPS data will be transmitted NOTE Refer to Sending current position on page 25 for further information about how to send manual position reports NOTE Refer to Sending message codes on page 26 for further information about how to attach message codes to manual GPS position reports Enabling manual transmission of GPS position From the Tracking Menu use the arrow keys to navigate to j Tra cking w Tracking Setup Tracking Setup Press the i ENTER key to select The Tracking Setup sub menu displays Tracking Setup Using the arrow keys navigate to Manual Position Manual Position Collective Switch Flightcell DZM2 Operating Manual Firmware v3 XX Page 53 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Manual Position Press the V ENTER key to select The Manual Position Disabled screen displays Position Only Position With Msg Using the arrow keys navigate to the manual sending mode required Disabled disables manual position reporting on the Flightcell DZM2 Position Only means only the GPS position is transmitted when the MARK key is pressed Position With Msg means that message codes may be sent with
39. age 57 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking va CRITICAL NOTE The Variation Timer must be set to a lower value than the Periodic Timer to function successfully NOTE The Variation Timer may be set between 0 to 60 minutes The default is 2 minutes To disable automatic heading change GPS transmission decrease the heading variation time interval to 0 This will default to Disabled When disabled the Flightcell DZM2 will not automatically transmit GPS data on heading change Press the ENTER key to select and save You are returned to the Tracking Setup sub menu Setting automatic GPS transmission based on low speed limit The Flightcell DZM2 uses the Low Speed setting to transmit GPS information on take off and landing providing good start and end points to flight paths Automated GPS position will not be sent when the aircraft s ground speed is less than the specified Low Speed limit When aircraft speed increases above this limit it transmits as a take off When aircraft speed decreases below this limit it transmits as a landing NOTE For helicopters the Low Speed setting should be set as low as possible to ensure automated GPS transmissions continue to occur when there are small changes in speed while hovering Alternatively use the Flightcell DZM2 Collective Switch function to transmit helicopter take off and landing information Refer to Setting
40. automated operator services and some PABX systems Common examples of where DTMF signaling is used are when selecting choices from telephone menus of call centers using phone banking etc When on a call DTMF is shown on the top line of the display This indicates that DTMF signaling is available When on a call the number keys and the used to send DTMF tones when required EMERGENCY their quick key functions Flightcell DZM2 Operating Manual Firmware v3 XX Page 23 of 95 Flightcell DZM2 operator s guide Making and answering calls Answering an incoming call The Flightcell DZM2 can receive incoming calls through the satellite phone STEP 1 Incoming call detected When the Flightcell DZM2 detects an incoming call on the satellite phone an alert displays on the LCD screen Incoming Call STEP 2 Answering the call R Flightcell DZM2 Press the CONNECT key to answer the incoming call SAT On Call The phone status displays On Call STEP 3 Rejecting or terminating the call Flightcell DZM2 Press the END key to terminate a call at any time or to SAT ldle reject the call The phone status returns to Idle NOTE The call will also be terminated if the party at the other end of the audio link hangs up Using the optional cabin phone A standard corded or cordless phone can be installed in the aircraft cabin for passenger use This is connected to the DZM2
41. automatic GPS transmission based on collective switch position on page 59 for further information about using the Collective Switch function NOTE Manual GPS data will be transmitted regardless of the Low Speed setting This allows positions to be marked while on the ground or hovering in a helicopter Setting the Low Speed Limit From the Tracking Menu use the arrow keys to navigate to Tracking Tracking Setup Tracking Setup ENTER key to select The Tracking Setup Lg Press the Vi sub menu displays From the Tracking Setup sub menu use the arrow keys to navigate to Low Speed Flightcell DZM2 Operating Manual Firmware v3 XX Page 58 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Tracking Setup Press the i ENTER key to select The Low Speed screen EM ET displays Collective Switch Sat Destination Press the arrow key to increase the low speed limit OR press the limit arrow key to decrease the low speed NOTE The Low Speed limit may be set between 5 and 100 knots The default is 10 knots To disable decrease the Low Speed setting to 0 This will default to Disabled When disabled the Flightcell DZM2 will transmit GPS data even when stationary and will not register take off and landings NOTE If the Collective Switch is used to trigger take off and landing information the Low Speed setting will be automat
42. bout using the Low Speed setting Flightcell DZM2 Operating Manual Firmware v3 XX Page 59 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Collective switch settings are usually configured upon initial installation only Adjust collective switch settings only with extreme caution Setting the Collective Switch From the Tracking Menu use the arrow keys to navigate to h i Tracking Tracking Setup Tracking Setup ENTER key to select The Tracking Setup sub menu displays Press the Tracking Setup Use the arrow keys to navigate to Collective Switch Collective Switch sat Destination SBD Enable Press the ENTER key to select The Collective Switch screen displays er Collective Switch Using the arrow keys navigate to the collective switch mode required Normally Closed Normally Open Select Normally Closed if the collective switch is closed Not Installed when the helicopter is in flight Select Normally Open if the collective switch is open when the helicopter is in flight This is the most common configuration of a collective switch Select Not Installed if the Flightcell DZM2 collective switch hardware is not connected to the physical switch in the helicopter NOTE The Collective Switch screen displayed enables you to check that the collective switch mode is configured correctly the Check Collective
43. d eg On ENTER key to save You are returned to the NOTE SBD transmission cannot take place when the Iridium Press the Setup Menu satellite phone is being used for a voice call However the Flightcell DZM2 is configured to automatically revert to SMS transmission mode when a voice call is in progress NOTE If SBD transmission is disabled all position data sent via your Satellite phone will be transmitted by SMS Flightcell DZM2 Operating Manual Firmware v3 XX Page 66 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Setting satellite message size When transmitting GPS position over the satellite network using Short Burst Data SBD mode you may define the level of detail included within each message The Flightcell DZM2 sends full position reports at programmed intervals Between each position report it also records intermediate positions know as breadcrumbs that provide additional tracking information Breadcrumbs may also be included as part of each normal position report SBD message size options The following SBD message size options are available Minimum Information The current GPS position plus the previous 2 recorded GPS positions will be transmitted Maximum Information The current GPS position plus the previous 3 recorded GPS positions will be transmitted NOTE By selecting Minimum Information you should only be charged for the 3
44. d page 66 NOTE By connecting your Flightcell DZM2 to a laptop computer running Flightcell DZM Configuration Utility software these settings may be very quickly and easily configured Refer to Using GPS tracking on page 34 for further information about installing and using the Flightcell DZM Configuration Utility AN The following GPS settings have dramatic effect on the way your Flightcell D2M operates Adjust GPS settings only with extreme caution Flightcell DZM2 Operating Manual Firmware v3 XX Page 52 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Accessing the Tracking Menu Tracking settings are configured using the Tracking Menu on your Flightcell DZM2 or by connecting your Flightcell DZM2 to a laptop computer running Flightcell DZM Configuration Utility software NOTE Refer to APPENDIX B Installing and using the Flightcell Configuration Utility on page 86 for further information about installing and using the Flightcell DZM Configuration Utility 0 Main Menu MENU 3 From the Main Screen press the MENU key to enter Tracking the menu system The Main Menu displays Setup Menu Cancel Queued Accessing the Tracking Setup menu Using the arrow keys navigate to Tracking Press the ENTER key to select The Tracking Menu displays Enabling and disabling manual GPS tracking Using the Flightcell DZM2 your current G
45. d press OK Enter 00881662900005 Press OK Flightcell DZM2 Operating Manual Firmware v3 XX Page 50 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Configuring GPS tracking Whether you plan to use the Flightcell DZM2 to transmit GPS data manually or automatically you need to do the following NOTE Refer to Using GPS tracking on page 34 for further information about using GPS tracking during flight NOTE Refer to Enabling messaging modes on page 65 for further information about SBD and SMS messaging TASK 1 Set up your tracking service Notify your tracking service provider of The serial number of your Flightcell DZM2 Refer to Identifying firmware version and serial number on page 48 for further information about how to identify the serial number of your Flightcell DZM2 The IMEI identification number of your satellite phone handset This is a 16 digit number located on a sticker under the Iridium battery Request from your tracking service provider The satellite phone SMS destination address The satellite phone SBD destination address The cellular SMS destination address NOTE Refer to Finding messaging destination addresses on page 64 for messaging destination addresses for some known tracking providers TASK 2 Set up your satellite network service If you will be using SBD messaging to transmit GPS position data Notify your satellite network service pro
46. de text This utility can also setup parameters using Over The Air Configuration OTAC This is useful when ground staff wish to change the Flightcell DZM2 settings for aircraft that is away from base NOTE At the current time phonebook entries and message text cannot be changed using OTAC System requirements for using the Flightcell Configuration Utility To install and operate the Flightcell Configuration Utility you will need A laptop computer installed with MS Windows 2000 or above A data connection to the Flightcell DZM2 for full use of the utility Firmware version 3 00 or above installed on your Flightcell DZM2 When setting up parameters via a data connection you will need the following information The serial number of the Flightcell DZM2 being configured When setting up parameters via Over The Air Configuration OTAC you will need the following information The Iridium satellite number of the Flightcell DZM2 being configured The serial number of the Flightcell DZM2 being configured Flightcell DZM2 Operating Manual Firmware v3 XX Page 86 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility Using the Flightcell Configuration Utility Using a laptop computer installed with the Flightcell Configuration Utility you may create and edit various settings on the Flightcell DZM2 Accessing the Flightcell Configuration Utility Click on the Flightcell Configu
47. e Flightcell DZM Configuration Utility METHOD 1 Send using the quick key Select By Number MARK key to send current GPS position data to an authorized recipient destination From the Main Screen press the Enter Message Number If coded message codes are enabled the Select By Number screen displays No Number displays until a message code number is entered Select By Number Enter the number of the message code to be attached to the manual GPS position report OR skip this step to send GPS position report only when no message code is required Flightcell DZM2 Operating Manual Firmware v3 XX Page 26 of 95 Flightcell DZM2 operator s guide Sending alert signals position reports and message codes Send Message Press the ENTER key The message corresponding to Target in sight the message code number entered will display Press the ENTER key to confirm and send The Message Queued screen displays before returning to the Main Screen Message Queued r 3 CANCEL OR press the CANCEL to cancel message selection NOTE Using this method the GPS position is recorded at the time the BARK MARK key is pressed not when the message is actually sent like in the Method 2 below METHOD 2 Send using the Compose Messages menu 0 Main Menu MENU Press the MENU key to enter the menu system The Compose Messa
48. e menu system the Flightcell DZM2 will automatically return to the Main Screen after 30 seconds unless another key is pressed Flightcell DZM2 Operating Manual Firmware v3 XX Page 17 of 95 Flightcell DZM2 operator s guide Flightcell DZM2 operator s guide Learn how to Use the Flightcell DZM2 functions that are often required by the pilot during flight NOTE Refer to Flightcell DZM2 advanced setup guide on page 49 for further information about how to configure advanced Flightcell DZM2 settings Flightcell DZM2 Operating Manual Firmware v3 XX Page 18 of 95 Flightcell DZM2 operator s guide Making and answering calls Making and answering calls Making a call using manual dial You may manually enter phone numbers into the Flightcell DZM2 to make an audio call STEP 1 Selecting to make a call using the satellite phone or cell phone From the Main Screen press one of the following keys Phone Number Select ENTER ENTRAR to redial MR1 3 for quick dial DIR for phonebook Oto enter new number Press the the satellite phone OR press the amp DIAL CELL key to make a manual call from the cell phone The Phone Number Select screen displays STEP 2 Entering the phone number From the Phone Number Select screen press the 7 0 6435458651 key to enter a new number Using the 0 to 9 keys enter the phone number Press and hold the
49. elect The message displays Flightcell DZM2 Operating Manual Firmware v3 XX Page 29 of 95 Flightcell DZM2 operator s guide Using text messaging MI J DIR FUEGO Use the S and arrow keys as required to view the whole message CANCEL CANCEL key to return to the Received Messages screen Press the Press the END key to return to the main screen Receiving a text message When a new text message is received Message Received flashes on the LCD screen of the Flightcell DZM2 Please return to base for reassignment Time GMT Press the ENTER key to view the message The Inbox displays showing details of the incoming message Press the I END key to return to the Main Screen Canceling unsent text messages A queue of unsent messages may build up due to low satellite network coverage levels or because a lot of text messages were generated in a short time Unsent messages may be cancelled from the queue if required Cancelling unsent messages queue The number of queued text messages displays on the Main Main Menu Screen Cancel Queued Press the MENU key to enter the menu system The Main Menu displays Using the arrow keys navigate to Cancel Queued Flightcell DZM2 Operating Manual Firmware v3 XX Page 30 of 95 Flightcell DZM2 operator s guide Sending flight order number information Press the ENTER k
50. ess the lt ENTER key to select The Sat MIC Gain screen displays I in Press the 3 arrow key to increase the sat phone MIC gain OR press the arrow key to decrease the sat phone MIC gain NOTE 0 is the lowest volume 100 is the highest volume 80 is the default volume Press the Audio Menu ENTER key to save You are returned to the Setting cell phone MIC gain Flightcell DZM2 Operating Manual Firmware v3 XX Page 72 of 95 Flightcell DZM2 advanced setup guide Configuring advanced audio settings Cellular MIC gain is audio from the Flightcell DZM going out to the connected cell phone The cell phone MIC gain may be adjusted on the Flightcell DZM AN The following MIC gain settings have dramatic effect on the way your Flightcell Dzmm operates Adjust MIC gain settings only with extreme caution Altering the cell phone MIC gain on the Flightcell DZM From the Audio Menu use the arrow keys to navigate to Cell MIC Gain Audio Menu Cell Mic Gain ICS Level DZM gt ICS ICS Level ICS gt DZM Press the ENTER key to select The Cell MIC Gain screen displays Cell MIC Gain gt 6 MRS Press the gain 4 arrow key to increase the cell phone MIC OR press the MIC gain arrow key to decrease the cell phone NOTE 0 is the lowest volume 100 is the highest volume 80 is the default
51. ey to select The Cancel Queued screen displays confirming the queue has been deleted before returning to the Main Screen Flightcell DZM2 Operating Manual Firmware v3 XX Page 31 of 95 Flightcell DZM2 operator s guide Sending flight order number information Sending flight order number information Use the Flightcell DZM2 to record customized flight information in numerical format Flight order number information can be transmitted to an authorized recipient destination using text messaging NOTE Configuration of the recipient server destination requires setup by a suitably qualified software technician Contact Flightcell International Ltd for assistance with configuring recipient server destinations NOTE Refer to Checking satellite messaging destination on page 62 for further information about checking the recipient destination when sending messages over the satellite network Refer to Checking cellular messaging destination on page 63 for further information about setting the recipient destination when sending messages over the cellular network Recording and transmitting flight order number STEP 1 Accessing the Flight Order Number screen From the Main Screen press the MENU key to enter the menu system The Main Menu displays Using the arrow keys navigate to Flight Order Number Press the m The Flight Order Number screen displays showing the last flig
52. eys to navigate to GPS Display Options Using the arrow keys navigate to the GPS display option required Off switches onscreen GPS position display off dddmm mmmm sets onscreen GPS position display to degrees and minutes to 4 decimal points dd mm ss s sets onscreen GPS position display to degrees minutes and seconds Speed and Heading sets onscreen GPS position display to knots and degrees relative to true north rather than magnetic north format NOTE No GPS Lock displays on the Main Screen if the Flightcell DZM2 does not have a valid GPS lock Press the ENTER key to save Configuring GPS tracking Tracking Tracking Setup Tracking Setup GPS Display Options Heading Variation Heading Timer GPS Display Options ae dddmm mmmm ddmm s 5 5 Speed and Heading Enabling and disabling automated flight following AFF You may define whether or not the automated flight following AFF function may be used on the aircraft or vehicle By default the AFF function is disabled Enabling and disabling AFF use From the Tracking Menu use the arrow keys to navigate to Tracking Setup Press the ENTER key to select The Tracking Setup sub menu displays Use the arrow keys to navigate to AFF Settings Press the t ENTER key to select The AFF Settings screen displays Using the arrow keys navigate to the AFF setting required eg On
53. f satellite phone connected to the Flightcell DZM2 must be specified NOTE The Flightcell DZM2 currently supports Iridium 9505 and 9505A satellite phones with the latest firmware releases For the 9505 model phone the latest firmware version is LAC0307 For the 9505A model phone the firmware versions operating may be LAC0307 ISO5004 or ISO6004 To check the firmware version of Iridium satellite phones type 91 into the phone Compatible satellite phones can be supplied by Flightcell International Specifying satellite phone type or no satellite connection From the Setup Menu use the arrow keys to navigate to Sat S etup Menu s Type Sat Type Backlight Brightness Backlight Mode Press the t ENTER key to select The Sat Type screen displays Using the arrow keys navigate to the connection type required eg Iridium 9505 A No Data Connection NOTE If the Flightcell DZM2 is not connected to a supported satellite phone select No Data Connection Press the ENTER key to save You are returned to the Setup Menu Setting cellular modem type To send audio and data over the cellular network the type of cell phone modem connected to the Flightcell DZM must be specified NOTE The Flightcell DZM currently supports WaveCom GSM Maxon CDMA and MultiTech CDMA cellular modems The default is MultiTech CDMA Compatible cell phone modems can be supplied by Fl
54. fied Viewing firmware version and serial number From the Setup Menu use the arrow keys to navigate to Setup Menu Firmware Version Firmware Version Press the ENTER key to select The Firmware Version screen displays showing model firmware version and serial number information Firmware Version Flightcell DZM2 Firmware 2 00 B060123456 Flightcell DZM2 Operating Manual Firmware v3 XX Page 48 of 95 Flightcell DZM2 advanced setup guide Flightcell DZM2 advanced setup guide Learn how to Configure your Iridium satellite phone handset Configure advanced Flightcell DZM2 settings not commonly requiring change by the pilot during flight NOTE Refer to Flightcell DZM2 operator s guide on page 18 for further information about common Flightcell DZM2 functions that are used by the pilot during flight Flightcell DZM2 Operating Manual Firmware v3 XX Page 49 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Configuring your Iridium satellite phone This section describes how to carry out initial configuration of your Iridium satellite phone handset Overriding satellite phone antenna lock Some early versions of the Iridium satellite phone will not work unless the antenna is locked in the 10 o clock or 2 o clock position If you receive an antenna alert when the satellite phone handset is installed in the Iridium phone mount you will need to ove
55. ge page or email NOTE An appropriately configured receiving server is required to receive distress signals and alert nominated parties NOTE Refer to Setting time interval for alert messaging on page 68 for further information about setting the time interval for alert messaging STEP 1 Transmitting an emergency distress signal From the Main Screen press and hold the EMER key to send an emergency distress signal Emergency Mode flashes at the bottom of the LCD Main Screen when in emergency distress mode STEP 2 Switching emergency distress signal off From the Main Screen press and hold the EMER key to return to normal mode NOTE If the Flightcell DZM2 was escalated from under fire alert mode directly into emergency distress mode it will return to under fire alert mode when the emergency distress signal is switched off Sending current position Your current GPS position may be manually transmitted at any time NOTE Manual position must be enabled to manually transmit your GPS position Refer to Enabling and disabling manual GPS tracking on page 53 for further information about enabling and disabling various manual sending modes NOTE Refer to Sending message codes on page 26 for further information about how to attach message codes to manual GPS position reports NOTE Refer to Automatically transmitting GPS position on page 34 for further information about sending automatic
56. ges Main Menu displays Sat Phone Reset l Audio Menu Using the arrow keys navigate to Compose Messages i Compose Messages Press the ENTER key to select The Compose Pick From List Messages sub menu displays Select By Number Using the arrow keys navigate to the compose message option required Pick From List Pick From List provides a list of messages to select from 3 Target in sight 4 Target destroyed 5 Returning to base Select By Number provides a list of message numbers to select from Send Message Press the ENTER key to select Target in sight Using the arrow keys navigate to the message from the Pick From List screen or enter message number from the Select By Number screen required Flightcell DZM2 Operating Manual Firmware v3 XX Page 27 of 95 Flightcell DZM2 operator s guide Using text messaging Press the t ENTER key The message corresponding to Message Queued the message code number entered will display ENTER key to confirm and send The Message Queued screen displays before returning to the Main Press the Screen OR press the selection CANCEL key to cancel message NOTE Using this method the GPS position is recorded at the time the ENTER key is pressed and the message is sent Flightcell DZM2 Operating Manual Firmware v3 XX Page 28 of 95 Flightcell DZM2 operator s guide Using
57. ghtcell Configuration Utility Configuring message code text Message code text is managed via the Flightcell Configuration Utility only These settings cannot be changed directly through the Flightcell DZM console To configure the Flightcell DZM2 via a data connection Enter new or edit existing text for message codes into the Fixed SMS Message screen To apply new settings to the Flightcell DZM2 click the NOTE OTAC is not available for message code configuration 7 fn Fri iaa ll ir dd ill hal ae bet keel bl m j f i r Kle 3 PSSS BT ee Cl DO Ld ed pi a if 1 J m FE Flightcell DZM2 Operating Manual Firmware v3 XX Page 93 of 95 Warranty and contact details Warranty and contact details Limited warranty for your Flightcell DZM Flightcell International Ltd s quality products are proudly designed and manufactured to the highest standards in New Zealand Your Flightcell DZM is warranted for 24 months from date of sale This warranty covers Flightcell manufactured items only Any ancillary items may be covered by individual manufacturer warranties The warranty is void if any labels are removed or if it is determined that your Flightcell DZM has been connected to a power supply delivering more than 32 Volts connected with reverse polarity installed in direct contravention to the guidelines outlined in the technical
58. ghtcell DZM2 via the Iridium network and to receive a reply Fj DF I Ci aw br Fie Tool Help Tracking Settings Aude S tingt SLIC Settings Ch Phone Book Secure Phone Book Fror SHS Messages Fomai Vernon Emy Merages Pradsmed Message Foanat Data Destination Humber GPS Ties im Course Times nt Course Orange Angie Eneeeperecy Tire ak Min Speed fits Sensor 1 Harik Sensori Min i Senace 1 Times xk Sensor 2 Max XE Senco 2 Min Et Sennor 2 Times nk Aiud Alarm Times n HE Comm Fort Opent VTM Ei Getting Sets from Local DEM Caen Port Cial COM 4 NDIE Incommg Setngn do sok marth Duby Settings Flightcell DZM2 Operating Manual Firmware v3 XX Page 88 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility Configuring audio settings To configure the Flightcell DZM2 via a data connection At the bottom right of the Audio Settings screen enter the serial number of the Flightcell DZM2 being configured HE Tees het from Local L hd DZM I button These To view existing settings for this Flightcell DZM2 click the will display in the left column of the Audio Settings screen Enter new settings into the right column of the Audio Settings screen Rt gat A th aaah AST Send to Local DZI 1 vt To apply new settings to the Flightcell DZM2 click the I button freed sa Ae FEE Ok free al PR bet from Local DZM
59. he ENTER key to save Tracking Configuring GPS tracking Tracking Setup Enable Disable Heading Variation Heading Timer Enable Disable Tracking On racking Suspend Setting automatic GPS transmission based on time interval The Flightcell DZM2 can be set to automatically transmit current GPS position to an authorized recipient destination at specified time intervals Enabling automated transmission of GPS data based on periodic time interval Tracking From the Tracking Menu use the arrow keys to navigate to riding san Tracking Setup Press the ENTER key to select The Tracking Setup Tracking Setup sub menu displays Periodic Timer Manual Sending Low Speed Use the arrow keys to navigate to Periodic Timer Press the ENTER key to select The Periodic Timer Periodic Timer screen displays Pal in s s Press the arrow key to increase the automated time interval Flightcell DZM2 Operating Manual Firmware v3 XX Page 55 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking OR press the time interval arrow key to decrease the automated NOTE The Periodic Timer may be set between 0 to 60 minutes The default is 4 minutes To disable automatic GPS transmission decrease the time interval to 0 This will default to Disabled When disabled the Flightcell DZM2 will not automatically
60. he way your Flightcell D2M operates Adjust ICS audio settings only with extreme caution Altering the ICS to DZM audio level on the Flightcell DZM2 From the Audio Menu use the arrow keys to navigate to ICS F Audio Menu Level ICS gt DZM ICS Level ICS gt DZM DZM Sidetone GPS MSG Tones ENTER key to select The ICS Level ICS gt DZM screen displays Press the ICS Level ICS gt DZM re a MRS Press the S arrow key to increase the audio level Flightcell DZM2 Operating Manual Firmware v3 XX Page 74 of 95 Flightcell DZM2 advanced setup guide Configuring advanced audio settings OR press the arrow key to decrease the audio level NOTE 0 is the lowest volume 100 is the highest volume 50 is the default volume NOTE This value should never be set to 0 Setting to 0 prevents all audio going out to the ICS from being heard Press the t ENTER key to save You are returned to the Audio Menu Setting Flightcell DZM2 sidetone When users wear a headset they can hear their own voice in their headphones The audio from their microphone is amplified and sent to the headphones This is called sidetone Sidetone is usually but not always provided by the audio panel or intercom interphone ICS Some installation configurations may require the Flightcell DZM2 to provide sidetone The Flightcell DZM2 sidetone setting is used to enable or di
61. her end or the satellite phone loses connection SAT Iridium Disconnected displays when either the Iridium phone has been removed from the phone mount or there is no connection to the phone mount SAT Sending SMS displays when an SMS message is being transmitted SAT Sending SBD displays when an SBD message is being transmitted NOTE Refer to Making and answering calls on page 19 for further information about using the satellite phone to make and receive calls The cell phone status displays on the Main Screen CELL Initializing displays when the cell phone is on and initializing The cell phone is not available for use at this time CELL Idle displays when the cell phone is powered on and connected to the Flightcell DZM2 but it is not in use Flightcell DZM2 Operating Manual Firmware v3 XX Page 9 of 95 Getting to know your Flightcell DZM2 The Flightcell DZM2 LCD display CELL Calling displays when the cell phone is dialing a clear call before a connection is established CELL On Call displays when the cell phone is connected on a clear call CELL Disconnecting displays when a call using the cell phone is terminated at the other end or the cell phone loses connection Satellite phone activity indicators display on the right of the Main Screen g displays when the satellite phone is powered on and ready for use NW displaye when the satellite phone is offline or stil
62. ht order number entered STEP 2 Recording flight order number ENTER key to select To update the flight order number if required Use the or more digits CANCEL key to move back and delete one Using the 0 to 9 number keys to enter new digits up to 7 digits Flightcell DZM2 Operating Manual Firmware v3 XX Main Menu Flight Order Number Received Messages Compose Messages Flight Order Number 1234567 Page 32 of 95 Flightcell DZM2 operator s guide Using GPS tracking STEP 3 Transmitting flight order number Flight Order Press the ENTER key to save and send the flight order y Queued number recorded The Flight Order Queued screen displays Flightcell DZM2 Operating Manual Firmware v3 XX Page 33 of 95 Flightcell DZM2 operator s guide Using GPS tracking Using GPS tracking The Flightcell DZM can transmit GPS position data to an authorized recipient destination using a satellite phone and or a cell phone The operator may manually transmit GPS position data or configure the Flightcell DZM to transmit automatically based on definable factors NOTE Refer to Configuring GPS tracking on page 51 for further information about important settings that need to be configured before GPS data will be transmitted NOTE GPS tracking is not a comprehensive surveillance and alert system Refer to Using automated flight following AFF o
63. iately configured receiving server and compatible computer mapping system AFF provides automatic surveillance over an aircraft or vehicle s mission Registering the start and end of a flight mission AFF tracks all points in between and automatically raises alerts if no position data is received from the aircraft for a specified time period set on the receiving server NOTE Refer to Enabling and disabling automated flight following AFF on page 70 for further information about enabling AFF for use in your aircraft NOTE This AFF feature is only available with some mapping systems Please contact your mapping service provider about availability of the AFF service on their network and to register for this service NOTE A manual distress signal may be sent from the aircraft or vehicle even when AFF is switched off Refer to Sending an emergency distress signal on page 25 for further information about sending a distress signal NOTE Using AFF does not affect GPS tracking configuration and all position transmissions will be sent as normal Refer to Using GPS tracking on page 34 for further information about using GPS tracking Registering AFF mission start and end points Automated flight following AFF must be activated and deactivated at the start and end of the flight mission NOTE To operate the AFF function must be enabled for use Refer to Enabling and disabling automated flight following AFF on page 70 for further i
64. ically set and cannot be disabled Press the ENTER key to save You are returned to the Tracking Setup sub menu Setting automatic GPS transmission based on collective switch position The Flightcell DZM2 Collective Switch feature is used as an alternative to the Low Speed setting for helicopters As helicopters are used for hovering the Low Speed setting may falsely record take offs and landings when they have not occurred With a physical connection to the helicopter s collective switch the Flightcell DZM2 instead triggers take off and landing events based on the lifting and lowering of the collective plus the helicopter s speed The Flightcell DZM2 s collective switch configuration is set based on the normal physical position of the switch in the helicopter during flight For example if the helicopter s switch is normally open when the collective switch is up off the floor during flight the Flightcell DZM2 will not transmit GPS position when the physical switch is closed collective switch down on the floor GPS position will only transmit when the physical switch is open collective switch up off the floor and deemed to be in flight NOTE If the Collective Switch is used to trigger take off and landing information the Low Speed setting will be automatically set and cannot be disabled Refer to Setting automatic GPS transmission based on low speed limit on page 58 for further information a
65. ightcell International Flightcell DZM2 Operating Manual Firmware v3 XX Page 77 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features Specifying cell phone modem type or no cellular connection From the Setup Menu use the arrow keys to navigate to Cell Setup Menu Type Cell Type Backlight Brightness Backlight Mode Press the ENTER key to select The Cell Type screen displays Cell Type Using the arrow keys navigate to the connection type required eg WaveCom GSM WaveCom GSM Maxon CDMA NOTE If the Flightcell DZM is not connected to a supported MultiTech CDMA cell phone modem select No Data Connection Press the ENTER key to save You are returned to the Setup Menu Updating Installer Menu password When security is applied to the Installer Menu many Flightcell DZM2 settings may only be viewed and edited by first entering the Installer Password NOTE Refer to the Menu Overview on page 15 to see which settings are protected by the Installer Menu NOTE Refer to Using the Installer Menu to protect advanced settings on page 47 for further information about using the Installer Menu NOTE The Installer Menu must be switched off to be able to view and change the Installer Password Updating the Installer password From the Setup Menu use the arrow keys to navigate to setup Menu Installer
66. imposed on a strong signal such as nearby arc welding equipment or variable speed drives It is possible that the SNR may be high but a GPS lock cannot be achieved This may be due to a low number of visible satellites a minimum of 4 satellites is required or satellites not in suitable strategic locations to acquire a GPS lock ie they may be close to the horizon Flightcell DZM2 Operating Manual Firmware v3 XX Page 35 of 95 Flightcell DZM2 operator s guide Using automated flight following AFF Number of satellites currently visible shows on line three of the display Satellites Used displays when you have a GPS lock The greater number of satellites being used to calculate your position the more accurate the position Satellites Detected displays when the Flightcell DZM2 is attempting to acquire a GPS lock This defines how many satellite signals are being received NOTE It can take up to three minutes to obtain a GPS lock if the DZM has not been used for some time If the GPS diagnostics screen shows no satellites after some time there may be an antenna connection fault Flightcell DZM2 Operating Manual Firmware v3 XX Page 36 of 95 Flightcell DZM2 operator s guide Using automated flight following AFF Using automated flight following AFF UIn addition to GPS flight tracking the Flightcell DZM also has Automated Flight Following AFF capabilities Used in conjunction with an appropr
67. ing destination The recipient destination for messages sent over the satellite network must be specified This is critical to the delivery of tracking mapping and other data to appropriate parties Messages are usually sent to a central ground data server which follows pre configured rules to distribute any received data appropriately The satellite messaging destination is set using the Flightcell Configuration Utility However you may check satellite messaging destination settings directly from the Flightcell DZM2 console as described below NOTE Refer to APPENDIX B Installing and using the Flightcell Configuration Utility on page 86 for further information about the Flightcell Configuration Utility NOTE Your Iridium satellite phone can use 2 different transmission modes to send data Short Burst Data SBD and Short Message System SMS Only the recipient destination for SMS messages may be specified from the Flightcell DZM2 Contact your satellite network service provider to configure the recipient destination for SBD messages Checking satellite phone messaging destination SMS only From the Tracking Menu use the arrow keys to navigate to Tracking Setup Flightcell DZM2 Operating Manual Firmware v3 XX Page 62 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking Tracking Press the ENTER key to select The Tracking Setup Tracking Setup sub menu displays Use the arrow
68. installation manual physically damaged or a fault has occurred due to the product being used beyond what is considered normal use Causing unusual deterioration of the product If the product is deemed to be faulty or in need of repair please contact Flightcell International Ltd to obtain a Returned Materials Authorization Flightcell International contact details Flightcell International Ltd PO Box 1481 98 Vickerman Street Nelson 7040 New Zealand Telephone 64 3 5458651 Fax 64 3 5488091 Email admin flightcell com Website http www flightcell com Flightcell DZM2 Operating Manual Firmware v3 XX Page 94 of 95 User notes User notes Flightcell DZM2 Operating Manual Firmware v3 XX Page 95 of 95
69. l attempting to power on m 8 displays satellite phone signal strength Cell phone signal strength indicators display on the right of the Main Screen Yaani minimum of three bars must be shown on the signal strength indicator to attempt transmission gt gt Cell Sat Isolated displays at the bottom of the Main Screen when satellite or cell phones are isolated muted NOTE Refer to Isolating muting phones on page 41 for further information about muting phones Automated Flight Following AFF status information displays at the bottom of the Main Screen when AFF is switched on AFF Requesting displays when AFF is switched on and confirmation of AFF operation is requested from the receiving server AFF Active displays when the receiving server confirms AFF is operating Flightcell DZM2 Operating Manual Firmware v3 XX Page 10 of 95 Getting to know your Flightcell DZM2 The Flightcell DZM2 keypad AFF Cancelling displays when AFF is switched off and confirmation of AFF termination is requested from the receiving server AFF Terminated displays briefly when the receiving server confirms AFF has been terminated No Response Retry displays when AFF operation or termination confirmation has not been received after several attempts Press the ENTER key to keep re trying No AFF Server Response displays to advise AFF operation or termination confirmation
70. l strength the Flightcell DZM will use the preferred device specified Flightcell DZM2 Operating Manual Firmware v3 XX Page 64 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking NOTE A minimum of three bars must be shown on the signal strength indicator on the Main Screen for the Flightcell DZM to attempt to transmit an SMS message via the cellular network NOTE The satellite phone activity indicator on the Main Screen must be showing as active a for the Flightcell DZM to attempt to transmit a message via the satellite network NOTE Refer to Configuring GPS tracking on page 51 for further information about important settings that need to be configured before GPS data will be transmitted NOTE Refer to Enabling messaging modes on page 65 for further information about SBD and SMS messaging Specifying the preferred messaging device From the Tracking Menu use the arrow keys to navigate to i j j Tracking Tracking Setup Tracking Setup ENTER key to select The Tracking Setup LG sub menu displays Press the Tracking Setup Use the arrow keys to navigate to Preferred Device Preferred Device SBD Enable SBD Message Press the ENTER key to select The Preferred Device screen displays Preferred Device Using the arrow keys navigate to the preferred device required eg Sat Phone Sat Phone
71. lect setup Menu Press the ENTER key to select The Language Select Language Select Using the arrow keys navigate to the language required eg ee ut English Language Select English Press the ENTER key to save You are returned tothe Espa ol Setup Menu Flightcell DZM2 Operating Manual Firmware v3 XX Page 84 of 95 APPENDIX A Sending text messages to a Flightcell DZM2 APPENDIX A Sending text messages to a Flightcell DZM2 SMS text messages can be sent to an aircraft or vehicle equipped with a Flightcell DZM Messages may be sent using the different methods outlined below NOTE Incoming text messages will display on the Flightcell DZM LCD screen when received If a computer with Flightcell SMS Console software is connected to the Flightcell DZM the incoming text message will also display on the computer screen when received Sending an SMS text message from another Iridium satellite phone SMS text messages may be sent from an Iridium satellite phone in the usual manner Sending an SMS text message from the Iridium network website Iridium provides a quick utility for sending SMS text messages via their website Using an internet browser go to the Iridium website at http www iridium com This is also accessible from the left column of the Flightcell International homepage at http www flightcell net From the top right of the page click on Send a Satellite Mes
72. lite or cell phone page 41 When on a phone call press and hold this key to activate this function Press to delete numbers shown on the display undo last action and return to previous screen Press to enter the menu system to configure Flightcell DZM2 settings page 16 When on a phone call press and hold this key to activate this function Press or press and hold to switch the Flightcell DZM2 on or off page 8 Press to select an option highlighted on the screen When the Menu Screen displays the following key functions are available ARROW keys MENU LIST QUICK keys ENTER key CANCEL key Press the up and down arrow keys to navigate through the menu options page 16 Press the left and right arrow keys to increase or decrease Flightcell DZM2 settings eg volume or level setting page 16 Press the 3 key to move directly to the first item in a menu list page 16 Press the 9 key to move directly to the last item in a menu list page 16 Press to select a menu item page 16 Press to save modified settings for a selected menu item Press to delete numbers shown on the display undo last action cancel any unsaved settings and return to previous screen Flightcell DZM2 Operating Manual Firmware v3 XX Page 13 of 95 Getting to know your Flightcell DZM2 END key The Flightcell DZM2 keypad Press to exit the menu system undo last action and return to the Main
73. m the receiving server AFF Terminated displays at the bottom of the screen when the receiving server confirms AFF has been terminated Ko Response Retry displays when AFF termination confirmation has not been received after several attempts Press the E ENTER key to re try Ho AFF server rsponse displays to confirm AFF termination confirmation has not been received No further automated attempts are made NOTE It is essential to register the AFF end point at termination of flight mission or an emergency alert will be raised and acted upon when the Flightcell DZM loses power ie when the aircraft is switched off If the bottom line of the display shows AFF Gancelling or HoAfFserverrsponse it s recommended that you make a radio or phone call to the appropriate personnel to advise completion of your mission Flightcell DZM2 Operating Manual Firmware v3 XX Page 38 of 95 Flightcell DZM2 operator s guide Controlling audio settings Controlling audio settings Various audio settings may be adjusted for the Flightcell DZM2 and connected devices These are shown in the diagram below and further described in the following sub sections NOTE Refer to Configuring advanced audio settings on page 72 for further information about configuring more advanced audio settings SAT PHONE Sat Phone Sat Phone Audio Volume MIC Gain TE to Cell Phone ICS Audio Audio Volume ee mM DZM Sidetone A FLIGHTCE
74. mer Tracking Setup ENTER key to select The Emergency Timer Emergency Timer Altitude Threshold Altitude Timer Press the screen displays n n Press the arrow key to increase the time interval Emergency Timer OR press the arrow key to decrease the time interval NOTE The minimum time interval for the Emergency Timer is 60 seconds Press the ENTER key to save You are returned to the Tracking Setup sub menu NOTE Refer to Sending an emergency distress signal on page 25 for further information about sending emergency distress and under fire alert signals Setting GPS location upon power up When powerup messaging is enabled the Flightcell DZM2 will send the current GPS location of the aircraft as soon as it powers up and a GPS lock is obtained If powerup messaging is switched off GPS transmissions will not begin until aircraft take off NOTE Following the initial powerup message being transmitted all other GPS message transmission depending GPS tracking settings confirmed on your Flightcell DZM2 will commence only once the aircraft starts moving Flightcell DZM2 Operating Manual Firmware v3 XX Page 68 of 95 Flightcell DZM2 advanced setup guide Switching powerup messaging on or off Configuring GPS tracking From the Tracking Menu use the arrow keys to navigate to Tracking Setup Press the
75. minate a call at any time The SAT Idle phone status returns to Idle Press the NOTE The call will also be terminated if the party at the other end of the audio link hangs up Making a call using the phonebook directory The Flightcell DZM2 can quickly dial phone numbers stored in the phonebook directory Flightcell DZM2 Operating Manual Firmware v3 XX Page 21 of 95 Flightcell DZM2 operator s guide Making and answering calls NOTE The phonebook directory is managed using the Flightcell DZM Configuration Utility Refer to APPENDIX B Installing and using the Flightcell Configuration Utility on page 86 for further information about the Flightcell DZM Configuration Utility STEP 1 Selecting to make a call using the satellite phone or cell phone From the Main Screen press one of the following keys Phone Number Select ENTER ENTRAR to redial MR1 3 for quick dial DIAL SAT key to make a manual call from DIR for phonebook Oto enter new number Press the the satellite phone OR press the amp DIAL CELL key to make a manual call from the cell phone The Phone Number Select screen displays STEP 2 Selecting the number from the phonebook directory DR Ballet From the Phone Number Select screen press the key The phonebook directory Browse screen displays 2 Base Control Tower Press the or arrow keys to move down and up the directory en
76. n page 37 for further information about automatic surveillance and alerting Manually transmitting GPS position Your current position may be transmitted manually at any time NOTE Refer to Sending current position on page 25 for further information about how to send current position data Automatically transmitting GPS position Using the Flightcell DZM2 your current GPS position may be automatically transmitted to an authorized recipient Automatic transmissions may be based on one or many of the factors below A specified time interval When changes occur in heading direction Aircraft take off and landing speed When the aircraft descends in altitude very quickly In emergency or under fire situations NOTE The Flightcell DZM2 requires a valid GPS lock in order to automatically transmit GPS position data Refer to Using GPS antenna diagnostics on page 35 for further information on GPS lock NOTE Refer to Configuring GPS tracking on page 51 for further information about configuring settings to enable automatic transmission of GPS position Flightcell DZM2 Operating Manual Firmware v3 XX Page 34 of 95 Flightcell DZM2 operator s guide Using GPS tracking Using GPS antenna diagnostics Use the Flightcell DZM2 antenna diagnostics function to view information about GPS antenna and signal quality Viewing GPS diagnostics information From the Tracking Menu use the arrow keys to navigate to E Tracking
77. nced setup guide Configuring other Flightcell DZM2 advanced setup features Setting analog sensor timer input The timer threshold defines the duration the minimum or maximum measurement may be exceeded before an alarm is raised Setting sensor timer threshold From the Analog Alarms screen use the arrow keys to navigate Analog Alarms to the threshold timer setting for alarm 1 ANL1 or alarm 2 ANL2 ANL1 Threshold Timer ANL2 Low Threshold ANL2 High Threshold Press the ENTER key to select The alarm threshold ANL1 Threshold Timer timer screen displays 7 p Press the arrow key to increase the threshold timer OR press the timer arrow key to decrease the threshold NOTE Timer thresholds are recorded in seconds Press the ENTER key to select Using digital alarms for monitoring The Flightcell DZM2 provides two general purpose digital sensor inputs When installed these sensors monitor against parameters configured by the user When the parameters are not met the Flightcell DZM2 transmits your current GPS position and alarm message to a specified destination NOTE One of these digital sensor inputs is used to monitor the collective switch when fitted Accessing digital alarms Accessing Digital Alarms From the Setup Menu use the arrow keys to navigate to Digital Alarms Flightcell DZM2 Operating Manual Firmware v3 XX Page 81 of 95
78. nformation on how to do this By default the AFF function is enabled unless it has been manually overridden STEP 1 Registering AFF start point at commencement of flight mission Flightcell DZM2 AFF quick key A SAT Idle message is immediately sent to the receiving server From the Main Screen press the AFF Requesting AFF Reguestin9 displays at the bottom of the screen when AFF is switched on Confirmation of AFF operation is being requested from the receiving server AFF Active displays at the bottom of the screen when the receiving server confirms AFF is operating Flightcell DZM2 Operating Manual Firmware v3 XX Page 37 of 95 Flightcell DZM2 operator s guide Controlling audio settings Ko Response Retry displays when AFF operation confirmation has not been received after several attempts Press the SEEE ENTER key to re try Ho AFF server rsponse displays to advise AFF operation confirmation has not been received No further automated attempts are made if this message is received AFF has NOT been activated STEP 2 Registering AFF end point at termination of flight mission Flightcell DZM2 AFF quick key A SAT Idle message is immediately sent to the receiving server From the Main Screen press the AFF Cancelling AFF Gancelling displays at the bottom of the screen when AFF is switched off Confirmation of AFF termination is being requested fro
79. nnnnnennnvnnnnnrnnvnnnnernnvrnnnnnnennnvnnnvennnvenn 72 Seung satele PHONE LEREN 72 Selig Cel PRONE MIC GAIA rn 72 SEG DZ 10 ICS AUGO EEE EE 73 Flightcell DZM2 Operating Manual Firmware v3 XX Page 4 of 95 Contents SEUNIT ICS 10 LN GUGIO EEE NE 74 SENO FUICEN DMZ GIRONE SENERE 75 Switching GPS MSG confirm tones on and Olf csusccnunensenennneccnnencnneuencansnsnensnsenensanscsaansceansnsansnanesensansnsanesens 76 Switching Keypad tones on and Oll ERE 76 Configuring other Flightcell DZM2 advanced setup FEAtUFeS c cccccecscecsseescesscereceeecerssensscsussneveeavenesensesneses 77 TGS LS POE VOO EEE EE EN A E TE ema 77 NNN 77 Updating Installer Menu password EE EE EN 78 USING andog ANS TOP MONLO verse AAAA AEE RAE 79 ACCESA OD UE ae EE te EA AAA EAEE E A EE EE 79 Setting analog sensor low CAPCSIOIG srssnirrars arsar irnni nakar EAE ERARA RATAR ERASER AREER EEEO ARAARA EA AEDE ARREAK 79 Setting analog sensor HIGH CAPCSHOI waeasescncencccenencnsnensenensneccannscnauencanananenensenensansenaansceauansansssnesssuanensanesens 80 Selg analog sensor OE NI avsenderen EE 81 USING GOE JETS NOM OG rs EE 81 ACCESSING EYE r r eneren 81 Se OA SENEO NONE s rede 82 Se NBA NOT ET vre Aasen 82 keong TACIOIV TET ENN hrs ETE TEETE AEDE 83 Seed 81000806 DEPP Najad 84 APPENDIX A Sending text messages to a Flightcell DZM2 arrvuuunnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnennn 85 APPENDIX B Installing and using the Flightcell Configura
80. ntrast Installer Menu Press the ENTER key to select The Backlight Mode screen displays Backlight Mode Always On Using the arrow keys navigate to the mode required eg Keypad Timeout Press the ENTER key to save You are returned to the Setup Menu Setting LCD contract Flightcell DZM2 LCD display contrast may be adjusted Setting LCD contrast From the Setup Menu use the arrow keys to navigate to LCD Setup Menu Contrast LCD Contrast Installer Menu Installer Password Press the ENTER key to select The LCD Contrast k screen displays __ LCD Contrast MR3 Press the fr arrow key to increase the contrast level OR press the arrow key to decrease the contrast level NOTE 0 is the lowest level 100 is the highest level 75 is the default level Press the ENTER key to save You are returned to the Setup Menu Flightcell DZM2 Operating Manual Firmware v3 XX Page 46 of 95 Flightcell DZM2 operator s guide Using Flightcell DZM2 common setup features Using the Installer Menu to protect advanced settings Some Flightcell DZM2 settings should only be altered by an authorized technician These settings can be protected from accidental alteration by using the Installer Menu security function How does the Installer Menu protect critical settings When security is applied to the Installer Menu these settings may
81. ormation about configuring other advanced setup features Accessing the Setup Menu Accessing the Setup Menu 0 f Main Menu Press the MENU key to enter the menu system The Setup Menu Main Menu displays Cancel Queued Using the arrow keys navigate to Setup Menu Press the ENTER key to select The Setup Menu displays Using Auto Power On When Auto Power is switched on the Flightcell DZM2 switches on automatically when aircraft power is switched on NOTE The default setting for Auto Power On is On Switching Auto Power on or off From the Setup Menu use the arrow keys to navigate to Auto j g i Setup Menu Power On Auto Power On Sat Type Backlight Brightness Press the ENTER key to select The Auto Power On screen displays Auto Power On Using the arrow keys navigate to the auto power mode required eg 0n Flightcell DZM2 Operating Manual Firmware v3 XX Page 44 of 95 Flightcell DZM2 operator s guide Using Flightcell DZM2 common setup features Press the ENTER key to save You are returned to the Setup Menu Setting backlight brightness The Flightcell DZM2 LCD display backlight brightness may be adjusted Set a specific brightness level or use an external signal from the aircraft s instrument light control NOTE The Flightcell DZM2 supports 0 5VAC and 0 28VDC external control signals Setting the
82. phone service center number on page 50 for further information about configuring the satellite phone service center number Ensure the antenna override is activated on your satellite phone handset Refer to Overriding satellite phone antenna lock on page 50 for further information about how to override the antenna lock TASK 5 Set up your Flightcell DZM2 i To send audio or data over the satellite network the type of satellite Set satellite phone type D phone connected to the Flightcell DZM must be specified page 77 Set satellite messaging To send data over the satellite network the recipient destination must destination be specified page 62 To send audio or data over the cellular network the type of cellular Set cellular modem type l modem connected to the Flightcell DZM must be specified page 77 Set cellular messaging To send data over the cellular network the recipient destination must destination be specified page 63 Where both satellite and cellular devices are configured you may PEP preterred messaging gece specify a preferred device to be used by the Flightcell DZM2 page or disabling unnecessary devices 64 i GPS data may be transmitted using different messaging modes A Set messaging mode l l messaging mode needs to be configured to send GPS data page 65 When transmitting GPS position data using SBD messaging mode the Set message size level of details included within each message may be define
83. ration Utility icon from your computer desktop The application opens displaying the following configuration tabs Tracking Settings for configuring GPS tracking settings Audio Settings for configuring audio settings SLIC Settings for configuring Subscriber Line Integrated Circuit settings of the optional aircraft cabin phone Clear Phone Book for managing entries stored in the clear unencrypted phonebook directory Secure Phone Book for managing entries stored in the secure encrypted phonebook directory Fixed SMS Messages for configuring text within message codes NOTE The bottom of the Tracking Settings screen provides details of actions being performed through the Flightcell Configuration Utility at all times p ae F n ms PR tm tg EE or TEF zx n EE Ae ae rs af Port penh SOOM 14 from Lord EM eran Local DAM Settings 60000009 Sn 6129001 cote GA s TRA CO 111280000 300 030 10030 semen Port Cloped VA WCC 14 OTE ireug Seir do mol natch Oubgeng Satine Configuring GPS tracking settings To configure the Flightcell DZM2 via a data connection At the bottom right of the Tracking Settings screen enter the serial number of the Flightcell DZM2 being configured Get from Local DZM To view existing settings for this Flightcell DZM2 click the button These will display in the left column of the Tracking Settings screen Enter new settings into the right column of the Tracking Settings screen
84. re call From the Main Screen press one of the following keys f Phone Number Select ENTER ENTRAR to redial MR1 3 for quick dial DIR for phonebook Oto enter new number Press the amp the satellite phone OR press the amp DIAL CELL key to make a manual call from the cell phone Flightcell DZM2 Operating Manual Firmware v3 XX Page 20 of 95 Flightcell DZM2 operator s guide Making and answering calls The Phone Number Select screen displays STEP 2 Selecting the number from the phonebook directory From the Phone Number Select screen press the TR ME i Flightcell 6435458651 a K pe Or quick select memory redial key The name and or number details will display Entry Empty will display if the quick select memory redial key entry is blank OR press and hold the ENTER key to call the last dialed number STEP 3 Dialing the number Flightcell DZM2 Press the CONNECT key to dial the number The phone SAT Calling status on the Main Screen displays Calling When the call is 6435449172 connected the phone status displays On Call NOTE It may take up to 30 seconds for the satellite phone to none Flightcell DZM2 NOTE If the call is canceled before connection the phone SAT On Call status displays Disconnecting before returning to Idle 64354491 2 STEP 4 Terminating the call Flightcell DZM2 9 END key to ter
85. rride this antenna lock Overriding the antenna lock Enter the code 92 into the satellite phone ANTENNA ALERT OFF displays Power the satellite phone off and re start for the override code to take effect Once the satellite phone has been powered on again it will not require the antenna to be rotated NOTE For the 9505 satellite phone the override code operates in handsets operating firmware version LAC0307 For the 9505A satellite phone the override code operates in handsets operating firmware versions LAC0307 ISO5004 or ISO6004 Enter the code 91 to identify the firmware version of your Iridium satellite phone handset NOTE Refer to Configuring GPS tracking on page 51 for further information about important settings that need to be configured before GPS data will be transmitted Configuring satellite phone service center number The service center must be set up on your Iridium satellite phone before you can send SMS messages NOTE The service center number is set up only once after which it is permanently stored in the satellite phone NOTE Refer to Configuring GPS tracking on page 51 for further information about important settings that need to be configured before GPS data will be transmitted Setting the service center number on the satellite phone handset Press the Envelope key on the keypad of the Iridium satellite phone Scroll to Message Settings and press OK Scroll to Service Center an
86. s SLIC Subscriber Line Interface Connection Making an outgoing call from the cabin phone To make a call on the cabin phone dial as you would a normal international call using the international dialing prefix 00 For example to dial a number in the United States dial 001 area code phone number The Flightcell DZM2 is configured to provide privacy to the party making the call from the aircraft If the cabin phone is in use the Flightcell DZM2 shows Passenger using phone Press END to to hang up The crew connected to the Flightcell DZM2 using their headsets cannot hear the conversation If the crew need to use the phone urgently they can press the End key to terminate the passenger s call If the crew are using the Flightcell DZM2 then the cabin phone gives a Busy tone preventing the use of the cabin phone by any other party Flightcell DZM2 Operating Manual Firmware v3 XX Page 24 of 95 Flightcell DZM2 operator s guide Sending alert signals position reports and message codes Sending alert signals position reports and message codes Sending an emergency distress signal In emergency a distress signal may be transmitted using the Flightcell DZM2 In distress mode the Flightcell DZM2 transmits position data with a distress tag attached at selected time intervals The receiving server identifies the distress signal and automatically raises an alarm alerting nominated parties by text messa
87. sable the Flightcell DZM2 s sidetone When ICS sidetone is On audio received from the ICS into the Flightcell DZM2 is passed back out to the ICS ICS sidetone is required to be activated where no sidetone is provided by an ICS or if there is no ICS Switching Flightcell DZM2 sidetone on or off From the Audio Menu use the arrow keys to navigate to DZM Audio Menu DZM Sidetone Sidetone GPS MSG Tones _ Keypad Tones Press the ENTER key to select The DZM Sidetone screen displays DZM Sidetone Use the arrow keys to navigate to the DZM sidetone option required eg On or Off On Press the ENTER key to select and save The Audio Menu displays NOTE The DZM2 sidetone is switched On by default This may cause excessive noise in some systems so if sidetone is provided by the aircraft ICS during calls it should be switched to Off Flightcell DZM2 Operating Manual Firmware v3 XX Page 75 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features Switching GPS MSG confirm tones on and off Flightcell DZM2 GPS MSG tones may be switched on or off as required GPS MSG tones are the sounds that are emitted when messages are queued or not transmitted Switching GPS MSG confirm tones on and off From the Audio Menu use the arrow keys to navigate to Fa Audio Menu GPS MSG Tones GPS MSG Tones
88. sage The Send a Satellite Message window displays Enter the destination phone number of the Iridium satellite phone in the To field Enter your message in the Message field Click Send Message The message will be sent Sending an SMS text message from another cell phone SMS text messages may be sent from most cell phones NOTE Some cellular networks may not send messages to Iridium phones It is suggested that you send a test transmission to determine whether this service is available on our cellular network Sending an SMS text message from an email program SMS text messages may be sent from any email program eg Microsoft Outlook in the usual manner Use the destination phone number in the To field of the email eg 8816XXXXXXxX msg iridium com Flightcell DZM2 Operating Manual Firmware v3 XX Page 85 of 95 APPENDIX B Installing and using the Flightcell Configuration Utility APPENDIX B Installing and using the Flightcell Configuration Utility About the Flightcell Configuration Utility The Flightcell Configuration Utility is installed on a laptop computer When the laptop computer is connected to the Flightcell DZM2 it may be used to configure various settings including GPS tracking settings Audio settings Subscriber Line Integrated Circuit SLIC settings for the optional aircraft cabin phone Phonebook directory entries for both clear and encrypted calls Message co
89. sensescesentaneaeesensensenee 15 PT FET OG A EEE yaaa E E ei NN ER vata N T T tate 15 TNO OSSIAN GTI ENE cia eee ec ENDE sare TER AA E 16 NENNE 16 see NNN 16 KUNN O CIE NEVIS STEN ae eaemben 16 MENNENE 17 sand NE SCLUND aerar aana AAT E EAA EAA IATE AT AA E EREE EA E EEEE 17 Mere 17 122 414 510 amp 1618 10 1 EE EEEE E EEA E N NE EE IP Flightcell DZM2 operator s GgUide rr ms rruurnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnenenennnnnennnnnnnnnnnennnnennnnnnnnennnnnnnnrnnnnn 18 Making and answering CAMS EEE EE aE e 19 MAKING G Call USING IGRI OI ieit EEEE EEE EEEE NEEE EEEE ae 19 MAKING ACH USING GUK ONV EE 20 Making a call using the phonebook directory ssssssessrsrrrsnrnsnrnnnnnnsnnnsnnsnrnnsnnnsernsnrnnnrnnnnnnannnnnnnnnnnnnnsnnnnnnnnnnnn 21 Using touch tone dialing DIME GUHNG A CIN SEE 23 PS U GN INCONMNG EEE LEN 24 USING UIC 6 5 4 0 41 COUN DONG EEE 24 Sending alert signals position reports and message codes vrarrnurnnnnnannnnrnnnnnnnrnnrnnnnnnnenannnnrrnnennrnnnnnnennnnnnrnnnenn 25 Sending an emergency distress Signal caseccnceucncnnuncnsnenenenannscananensauencanssnuenensanensanscsaansceanansansssnanssuansnsaneseas 25 Sending CUNEN PONTON EEE EE 25 SENG MES SIGO COD CS s nnene EES AEEA EEE AE AESSR E 26 Fe Eg 050 NE E E E E E tet 29 Using the Received Messages Screen wescssencrescnnennnnencccnuncananensnnnnanensnnansnsanssannnsanauenenensenanensansnanessaaansssanasens 29 RE AGE KNE SE ENE EEE SNE TEN 30 Canceling UNSEN text MESSI
90. ting automatic GPS transmission based on low speed MITC issccscccseccnecensuscnessnenscansensusnsusennssnsnsssessnessnins 58 Setting automatic GPS transmission based on collective switch position sissiesenesenesscnnscnnccnsusenncsnsnsnsnssnenenins 59 Setting automatic GPS transmission based on altitude Change wiscrssecnsvccnnncsensnsennnsensnnennnnsensnssennassnnsssnnssgs 61 Checking satellite messaging destination ascsescnnenccsnnccnnuncccanencnnssansnennensnsanssanensanausneanssanansnsansnanessanansnsaneseas 62 Checking cellular messaging destination wascsescnnecuncenccnnunccnenencnnncnensnnensnsanssanensaeansnenansenansnsansnaneseananssaansnsas 63 Finding messaging destination addresses r rrrunarrnnarrnnrrnnnrrnnnr ener nnerr onder TEESE EEDA onder noden TEESE ener EEE SEE EEE E EES 64 Setting preferred messaging device wi sscseccncencccnsnccnsnensenensunscnnansnnanensansnanensnsansnsanencannsceansssansssuesennansssanssens 64 Franin Messaging 812 0 0 EEE EEE EN EE NE 65 Setting satellite message Size EE EEE EE ENE EN EE 67 Setting time interval for alert MESSAGING wssceseccnnecnsncnnenennnnccnnanecnanencansnanenennansnsanssanansneanessansssnesesuanensanssses 68 Setting GPS location UPON DOWEL UD sanne dene NANANA EEEE E EEEN 68 VES 69 Enabling and disabling automated flight following AFF ssscsescnncccneccnecensnsnnenenenssnssansensnssaensnnnsnensnsessninstans 70 Configuring advanced audio settingsS rr rarrranrrrrannrannrnnnnnnnnrnnvrnnnnrnnrrnnnnnn
91. tion Utility sruuunnavvrnnnnnnvvnnnnnnnvennnnnnnvenn 86 About the Flightcell Configuration Utilitsscccccccsccevscesscenscevscevsccesssescenscsvssevsssenssenssenssevssevssecsssesssenstensssvase 86 System requirements for using the Flightcell Configuration Utility ccccccerssssrsessvssserssserscsesssesssesssensssenseses 86 Using the Flightcell Configuration Utility cccccccveccesccessccsscescensecescsessenscenssevssecsssesssenstevssevssersssesssenssensssvase 87 Warranty and contact details cis scicncaicdsasveninnivvcsnddnicaendnsandinauskeseassesdnnscsaiaseddsanndcdsssdsanandatsataddspsunidudnabeens 94 Limited warranty for your FlightcelP DZM cisccerscerssssesccenscsessssensssesusensuseesssensssesssesssensusecsusssssensssensssnsssenss 94 Flightcell International contact details vasccecccesssesscevsccvsccvsesesssesscenscesesesssesscenssenssesssesssenssenssevssensssenssensees 94 VET Jr 95 Flightcell DZM2 Operating Manual Firmware v3 XX Page 5 of 95 Flightcell DZM2 at a glance Flightcell DZM2 at a glance INTEREST Mark point of ALERT ISOLATE interest and send Send alert Send distress preset message signal message ENTER T Confirm settings Connect call CLEAR Clear calling MR3 mode Memory redial 3 SECURE MR2 Secure calling Memory redial 2 mode MR1 NVG compatible Memory redial 1 backlit display AISLAR END Isolate phone call End call Return to main screen DIR Select number from Phonebook
92. tries to locate the desired entry Entry Empty will display if the phonebook directory entry is blank Flightcell 6435458651 NOTE This phonebook directory screen will show the name of the contact for each phonebook entry If no name is recorded it will show the phone number Press the ammen ENTER key The full name and number details recorded for the phonebook directory entry will display STEP 3 Dialing the number R Flightcell DZM2 Press the 4 CONNECT key to dial the number The phone SAT Calling status on the Main Screen displays Calling When the call is 6435449172 connected the phone status displays On Call NOTE It may take up to 30 seconds for the satellite phone to respond Flightcell DZM2 Operating Manual Firmware v3 XX Page 22 of 95 Flightcell DZM2 operator s guide Making and answering calls NOTE If the call is canceled before connection the phone 2 2 j Flightcell DZM2 SAT On Call 6435449172 status displays Disconnecting before returning to Idle STEP 4 Terminating the call Flightcell DZM2 END key to terminate a call at any time The SAT Idle phone status returns to Idle Press the NOTE The call will also be terminated if the party at the other end of the audio link hangs up Using touch tone dialing DTMF during a call Dual tone multi frequency DTMF signaling commonly known as touch tone dialing uses key tones to signal to
93. v3 XX Page 82 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features ea Digital Alarms MARS ee E Press the I arrow key to increase the timer threshold Digital One Timer Digital Two Mode Digital Two Timer OR press the pene Digital One Timer NOTE Timer thresholds are recorded in minutes arrow key to decrease the timer Press the ENTER key to select Restoring factory default settings The Flightcell DZM2 factory default settings may be restored if required Restoring to factory default settings From the Setup Menu use the arrow keys to navigate to Factory setup Menu Reset Factory Reset Firmware Version Press the ENTER key to select The Factory Reset screen displays Factory Reset Press ENTER to reset to Factory Defaults Press the r 3 CANCEL OR press the unchanged ENTER key to reset factory settings Any other key to exit CANCEL key to leave the current settings You are returned to the Setup Menu Flightcell DZM2 Operating Manual Firmware v3 XX Page 83 of 95 Flightcell DZM2 advanced setup guide Configuring other Flightcell DZM2 advanced setup features Selecting language preference You may select the language that displays on the Flightcell DZM2 LCD screen Selecting language preference From the Setup Menu use the arrow keys to navigate to Language Se
94. vider of the IMEI identification number of your satellite phone handset This is a 16 digit number located on a sticker under the Iridium battery Notify your satellite network service provider of the satellite phone SBD destination address This should be provided by your tracking service provider or refer to Finding messaging destination addresses on page 64 You will also need to agree a contract for the SBD service with your satellite network service provider If you will be using Iridium SMS messaging to transmit GPS position data Check your satellite network service provider supports SMS messaging If you will only be using SMS messaging you should also agree a bulk SMS message plan with your satellite network service provider to obtain discounted prices for SMS messages Flightcell DZM2 Operating Manual Firmware v3 XX Page 51 of 95 Flightcell DZM2 advanced setup guide Configuring GPS tracking TASK 3 Setting up your cellular network service If you will be using a cellular modem to transmit GPS position data Notify your cellular service provider of the phone number of your cellular modem You will also need to agree a bulk SMS message plan with your cellular network provider TASK 4 Set up your Iridium satellite phone handset If you will be using a satellite phone to transmit GPS position data Enter the satellite phone service center number into your satellite phone handset Refer to Configuring satellite
95. volume Press the ENTER key to save You are returned to the Audio Menu Setting DZM to ICS audio level The audio level from the Flightcell DZM2 being received into the intercom interphone system ICS may be adjusted on the Flightcell DZM2 AN The following ICS audio settings have dramatic effect on the way your Flightcell D2M operates Adjust ICS audio settings only with extreme caution Altering the DZM to ICS audio level on the Flightcell DZM2 Flightcell DZM2 Operating Manual Firmware v3 XX Page 73 of 95 Flightcell DZM2 advanced setup guide Configuring advanced audio settings From the Audio Menu use the arrow keys to navigate to ICS a Audio Menu Level DZM gt ICS ICS Level DZM gt ICS ICS Level ICS gt DZM DZM Sidetone Press the ENTER key to select The ICS Level DZM gt ICS screen displays ICS Level DZM gt ICS Fal a Press the arrow key to increase the audio level OR press the arrow key to decrease the audio level NOTE 0 is the lowest volume 100 is the highest volume 16 is the default volume Press the ENTER key to save You are returned to the Audio Menu Setting ICS to DZM audio level The audio level from the intercom interphone system ICS going out to the Flightcell DZM2 may be adjusted on the Flightcell DZM2 AN The following ICS audio settings have dramatic effect on t
96. wer supply is disconnected NOTE If Auto Power On is disabled you will need to press and hold the i the LCD display screen reaches the end ENTER key until the progress bar on NOTE Refer to Using Auto Power On on page 44 for further information about Auto Power On NOTE A connected Flightcell satellite phone cradle will switch on and off automatically whenever the Flightcell DZM2 is switched on or off Flightcell DZM2 Operating Manual Firmware v3 XX Page 8 of 95 Getting to know your Flightcell DZM2 The Flightcell DZM2 LCD display The Flightcell DZM2 LCD display The LCD display screen on the Flightcell DZM2 has Main Screen and Menu Screen modes The Main Screen displays the operating status of the Flightcell DZM2 The satellite phone status displays on the Main Screen Flightcell DZM2 SAT Initializing displays when the satellite phone is on and SAT Idle initializing The satellite phone is not available for use at this gt gt Sat Isolated time Emergency Mode SAT Idle displays when the satellite phone is powered on and connected to the Flightcell DZM2 but it is not in use SAT Calling displays when the satellite phone is dialing a clear call before a connection is established SAT On Call displays when the satellite phone is connected on a Clear call SAT Disconnecting displays when a call using the satellite phone is terminated at the ot

Download Pdf Manuals

Related Search

Related Contents

24240558301-A SP16G-A CD  PONTA DE PROVA DE ALTA TENSÃO HV-40A  CBA0001 - Mastro  Le guide de prise en main Z500  2014年10月号 (PDFファイル:6.6MB)  Manual de usuario - Recambios, accesorios y repuestos  Original Power 90342 mobile device charger  BMW 2015 i8 Owner's Manual  189€ - POLE VERT  Tripp Lite Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) - Gray, 2-ft.  

Copyright © All rights reserved. Failed to retrieve file