Using the Yaba X Surface Sound Speaker
Contents
1. Using the Yaba X Surface Sound Speaker Warning Do not use the charging cable to charge any device other than the Yaba X Speaker Step One Turn on the Yaba X Speaker by holding down the power button for 3 seconds The blue lights will turn on when the unit is on The Yaba X comes with a 60 charge Push Push for for MP3 Guitar Step Two Plug in the audio cable into the Yaba X Speaker port Turn on your audio device and plug in the other side of the cable into its audio output port or a guitar with supplied 3 5mm to 1 4inch adapter Step Three Place the Yaba X Speaker on various surfaces The Yaba X Speaker s frequency response and sensitiv ity are dependent on the exciter s resting surface Thinner smaller materials will tend to be louder and facilitate mid tweeter response Thicker larger materials will be slightly quieter but result in more full range sound Step Four Enjoy Volume is controlled by the music playing device that you connected to the Yaba X j Turn off the Yaba X by holding down the power button for about 3 seconds while the unit is on Note For best results use Nonactive Pickups Charging the Yaba X Speaker Connect the charging cable to the Yaba X using the audio jack plug Connect the USB side of the charging cable into any active USB port to begin charging The red charging LEDs will turn on dur ing charging When the Yaba X is fully charged the purple LED will flash Charging should2. ft Audio Cable Frequency Response 50Hz 20000Hz 1 4 to 3 5mm Adapter Input Standard 3 5 mm Audio Jack 3ft USB Charger Cable Enclosure Non Toxic Zinc Metal Soft Carrying Case Internal Battery Lithium Polymer Amplifier 2 4 Watt Class G Amplifier Certifications FCC CE Battery Life 8 Hours Technology Surface Sound Indicator Lights 3 Bi Color LEDs User Manual FE Human Interface Single Button Power Standard Music Guitar Slider Switch Charge Built in Charger with USB Cable TERMS OF USE PLX Devices Inc does not guarantee product functionality with any third party device Implementation and integration of the PLX products with any other device s must be done at your own risk Improper installation and usage may lead to engine damage PLX Devices Inc does not guarantee product functionality with all surfaces LIMITED WARRANTY PLX Devices Inc warrants this product to be free from defects for 1 year from the date of purchase If applicable Oxygen sensors and other non serviceable items are excluded from stated warranty Serviceable goods must be determined by PLX Devices to be defective before any warranty or replacement is issued PLX Devices obligation under warranty shall be limited to repairing or replacing under the discretion of PLX Devices any part proven defective This warranty is limited to the repair or replacement of parts in the manufactured good and the necessary labor done to affect its repair o
3. r replacement SERVICE UNDER WARRANTY In the unlikely event that your PLX Devices hardware should fail during the warranty period a Return Material Authorization number RMA must be first retrieved from PLX Devices Customer Support Support can be contacted through email rma plxdevices com or by phone 408 745 7591 All serviceable goods must be packaged securely with proof of purchase RMA number with all shipping charges prepaid and shipped to PLX Devices Inc Goods returned under warranty must be received by PLX Devices Inc within ten 10 business days after the RMA number has been issued Goods received after this period are subject to fees for the service of repair or replacement All repaired or replaced items shall be warranted for the remainder of the original product warranty or 90 days whichever is longer RETURNS AND RESTOCKING FEE All returns must be within 30 days of receipt A 15 restocking fee will apply to applicable PLX Devices products returned for refund Shipping charges are non refundable once performed All returns are to be packed in original condition including packaging documentation manuals and accessories Returns that do not include all the accessories and components may be returned to the customer or charged on a per item basis The customer assumes responsibility for product until receipt at PLX Devices Inc Shipping via an insurable carrier is recommended Any unauthorized shipping charges will be billed to the cus
4. take roughly three hours to charge completely Charging Charge Complete On f Blinkin Indications l 8 Use provided charge cable only Provided charge cable only provides charging and will not interface computer audio For use with computer use provided audio cable Do not expose Yaba X Speaker to fire or extreme heat Do not disassemble or alter the Yaba X Speaker Do not submerge Yaba X Speaker in water or other liquids or place in a wet environment Do not use Yaba X in an environment outside of a temperature range of 20 degrees C to 85 degrees C Troubleshooting The Yaba X Speaker does not turn on The speaker battery might be low Please use the provided charging cable to charge your speaker The audio signal quality is choppy or the volume is too low The speaker battery might be low Please use the provided charging cable to charge your speaker The audio signal quality seems distorted or the volume is too low Try a different surface or decrease the volume the Yaba X Speaker s frequency response and sensitivity are dependent on the exciter s resting surface Thinner smaller materials will tend to be louder and facilitate mid tweeter response Thicker larger materials will be slightly quieter but result in more full range sound Specifications Physical Dimensions 2 4 x 2 8 x 0 87 61 x 71 x22mm LxWxH lic hiided ienis Weight 5 9 oz 167 g Yaba X Speaker Operating Temperature 0 85 Degress Celsius 3
5. tomer or shipment will be refused DISCLAIMER PLX Devices Inc shall not be liable for direct special incidental or consequential damages resulting from any legal theory including but not limited to lost profits downtime goodwill damage injury to persons or replacement of equipment and property due to improper installation integration and or misuse of any PLX Devices Inc s product s This warranty applies to the original purchaser of product and is non transferable All implied warranties shall be limited in duration to the said 1 year warranty period This product complies with FCC Part 15 rules Operation of this product is permitted in USA this product may not cause harmful interference and is able to accept any harmful interference received including interference that may cause undesired operation DEVICES This Class B digital apparatus complies with Canadian Interference Causing Equipment Regulations
Download Pdf Manuals
Related Search