Home

Content

1. 08 09 10 11 12 13 08 Battery pack cover 09 Batteries 10 clearance button 11 Interior lock face m button 12 USB port 13 Interior lever 1 1 2 Dimensioned Drawing Y iJ I i i Front view Front view Side view Back view Side view 1 2 Product Features Support of unlocking the door by fingerprint password and mechanical key Visual digital display and easy operation which are more convenient Zinc assembly which is more durable delicate and attractive With functions of low battery warning tamper alarm and pseudo password alarm Adoption of international advanced bio technology is to ensure high quality of the product 1 3 Scope of Application Scope of application government departments public security bureau army banks courts hospitals office blocks residential communities etc 1 4 Unlock Ways Left pull hand door Right pull hand door Left handed door When you stand outside the door and the fixed hinges are on the left the fingerprint lock is then defined as left handed door which is further divided into left push handed door and left pull handed door Right hand door When you stand outside the door and the fixed hinges are on the right the fingerprint lock is then defined as right handed door which is further divided into right push handed door and right pull handed door Note For U20 product you should set the dip switch of left right handed door before the ins
2. 3 4 Adjustment When the lock is fixed on the door please adjust it as per Chapter 2 till the lock works well 20 1 2 3 4 5 6 7 8 9 10 11 4 Maintenance 4 1 Routine Maintenance The lock face is prohibited to contact with corrosive substances so as not to damage the prevention layer of the lock face and affect the glossiness of lock face The lever is a key part of the door lock and its performance will directly influence its operation Do not hang any objects on the lever If the door is deformed the friction between bots and striking box will be enlarged and the bolt cannot extend fully Hereby the position of door striking plate should be adjusted The surface of reader will be dirty or wet after use of a long time Here you can wipe off the dirt with a dry and soft cloth Please replace the batteries timely when low battery warning has been heard Pay attention to the positive and negative poles of batteries during replacement Please keep the mechanical key well Do not use any hard and sharp object including fingernail to scratch the reader Put the finger flat on the reader during acquisition and verification If the lock can not be rotated flexibly or the lock can not be kept in correct position you should invite the professionals to fill the mortise with mechanical lubricant Ensure that transmission part of the assemblies with lubricant to maintain its smoothness and extend its lifet
3. door cannot be unlocked The setting of the access control function shall be completed by the handset provided by the company For details refer to the handset operation manual 2 2 5 Dip Switch Function Dip switch function is applicable for U20 with dip switch Check the setting of dip switch on the interior lock face before operation The form below is about setting of dip switch Door contact locks the Left handed Voice off Reserved door automatically Off Door contact locks the l l Right handed Voice on Reserved door automatically On ON i 2 3 4 Diagram of dip switch Diagram of left right handed door Notes 1 The setting of left handed and right handed shall be consistent with the installation position of the lock or else the lock can not work normally 2 The door contact can lock the door automatically only when the contact is installed 3 Please use a ball point pen or similar tools to toggle the switch to avoid damage to the switch 2 2 6 Double Lock Function When the lock is in unlocked position lift the lever applicable for U30 long beep will be heard and red LED light will flash which means successful operation 2 2 7 Door Contact Function Door contact function is only applicable for U20 products that connect with door contact If door contact is installed and the function that door contact locks the door automatically has been activated refer to section 2 2 5 for details the door
4. long time please take along with your mechanic key and remove the batteries For user who has difficulty to enroll his fingerprint due to poor fingerprint quality he is recommended to enroll with his thumb and enroll over two fingerprints to improve the rate of successful fingerprint acquisition The fingerprint template capacity is 100 while password capacity is 5 groups Please save new users detailed information in Registration Form below for convenience of management Factory default password is 0 12341234 but no fingerprint is included Signals and LED light For every successful operation long beep will be heard once and the green LED light will flash once but when it fails short beep will be heard for twice the red LED will flash once and then exit This user manual is applicable for U series products U30 has been taken as the example in figures and installation instruction in this manual Enrollment Form To facilitate the administration of fingerprints and passwords we have made a form for administrators to record the details of enrollment You can also design a form to meet your requirements for enrollment 1 Product Introduction 1 1 Product Drawings 1 1 1 Outside Drawing 01 02 Ha H 05 06 pS 07 01 Exterior sliding cover 02 Nixie tube 03 Keypad 04 Reader 05 Exterior lock face M button 06 Exterior lever 07 Emergency power supply interfa Note No lever is included in U20
5. Content Product Introducir da roduct Drawing S seii a a a f Application echnical Parametros Basic Function Optional Function O tion and Administration i peration a IMS TAHOM aaas ae E A nstallation and Adjustmen stallation a ISTMO Zeie R Installation Setra iba l Notes for ista irradia dado l OURS MAINTENANCE aaa Packing list Tools for lr stallatior A A wanes a 10 Important Notes The fingerprint lock is a high tech product and its installation will impact its operation and lifetime directly It is recommended to invite a professional to install the lock according to the user manual If the lock can not work after installation please contact with local distributor or agency freely for help If your apartment is under decoration we recommend that you dismount the product and re install it after decoration The aims are to avoid corrosion of the assembly caused by corrosive substances in the decoration which will accelerate the chemical changes on product s surface and avoid the inflexibility of the lock caused by wet paint After installation and adjustment please clear all fingerprints and password in factory default and enroll your own administration password and fingerprints for security Beeps for low battery warnings will be heard if it is in low power Please replace the batteries timely and correctly If you are to be away for several days or the lock does not need to work for a
6. as Section A A LA 18 3 2 3 Step 3 Installation een Mortise Screws Interior mounting plate Interior shim plate Battery Ll y os in AA Screw SU IES cover Screw Interior assembly Spindle Exterior assembly pack cover Exterior T a aR y 19 1 As shown in the figure insert the mortise and fix it on the door with screws 2 As shown in the figure install exterior assembly interior shim plate and interior mounting plate on the door and fix them with raised countersunk screws 3 As shown in the figure install interior assembly and spindle on the interior mounting plate and fix them with screws and install batteries battery pack cover and screw cover 4 As shown in the figure install striking box and Screws striking plate on the frame Striking plate Striking box and fix them with screws And check the mortise at last Door frame 3 3 Notes for Installation 1 Check the door thickness before installation whether it is within the requirements U10 U20 U30 are applicable for door thickness of 35 80mm 2 Do not press the internal wire harness when fixing assemblies 3 During installation handle the lock carefully so as not to scratch the assemblies
7. be displayed on the nixie tube On the other hand you can also input another password numbers will be displayed on the nixie tube Add user 3 Press to confirm password 4 Press to confirm ere user password 8 _ will be displayed on the nixie tube a Pess ie con n Long beep will be heard and green LED light will be on Verify administration Long beep will be heard and green LED ae or administration light will be on PO FOOO will be displayed fingerprint on the nixie tube 2 Press Key 4 4 will be displayed on the nixie tube Delete user Starting the function of delete password password 3 Press to confirm and a group of number will be displayed single on the nixie tube On the other hand you can also input another password numbers Long beep will be heard and green LED 4 Press to confirm light will be on The number just been deleted will be displayed on the nixie tube When clearing all fingerprints and setting the administration password clearing the Notes user password press the corresponding key and hold for 10 seconds otherwise the system will have no response and the operation will fail The password key lock body can only change administration password not modify user password Before clearing the fingerprint if there comes low battery warning the initialization may fail Please replace the batteries before this operation 13 2 Method to verify the adminis
8. can be locked automatically after being closed There is no need to unlock the door by pressing button M if it is not connected press a or turn the turn piece to lock the door when the door is closed but the lock is in unlocked position 10 2 3 Operation and Administration 2 3 1 Keypad Operation Method 1 Keypad Drawing There are six keys on the lock they are 0 1 2 3 4 and Besides inputting numbers the numeric keys can also be used as the function keys Passwords and fingerprints can be managed by pressing the following function keys after the verification of administration password or administration fingerprint is used to confirmation For example you can input 1 to add new fingerprint More details are as follow 2 Password The password consists of one digit password number and 8 digits number You can set 5 groups of passwords and the number is PO P1 P2 P3 P4 P is the operational number PO is administration number you can use it to delete add other user passwords or fingerprints P1 P2 P3 P4 are the default user passwords 3 Fingerprint Number The maximum number of fingerprint is 100 and you can not save one fingerprint for twice Every fingerprint has its number and it consists of a 3digits number such as 000 442 321 etc the number will display in order e g 123 will be displayed as F1 gt 23 F mean fingerprint When you enrol
9. e heard and green LED password or administration light will be on PO FOOO will be displayed fingerprint on the nixie tube 2 Press Key 1 1 will be displayed on the nixie tube Add user Starting the function of add fingerprint and fingerprint a group of number will be displayed on the 3 Press to confirm nixie tube On the other hand you can also input another fingerprint numbers 4 Press to confirm Light on the reader will be on Bp Long beep will be heard and green LED 5 Fingerprint acquisition light will be on 12 Phenomena when the operation is Procedures successful Verify administration Long beep will be heard and green LED password or administration light will be on PO FOOO will be displayed fingerprint on the nixie tube 2 Press Key 2 2 will be displayed on the nixie tube Delete user Starting the function of delete fingerprint fingerprint and a group of number will be displayed single 3 Press to confirm on the nixie tube On the other hand you can also input another fingerprint numbers 4 Press to confirm Long beep will be heard and green LED light will be on Verify administration Long beep will be heard PO FOOO will be password or administration displayed on the nixie tube and green LED fingerprint light will be on 2 Press Key 3 3 will be displayed on the nixie tube Starting the function of add password and a group of number will
10. ie tube green LED light will be password on and long beep will be heard 8 Open the door By 1 Insert mechanical key and mechanical rotate it key 2 Open the door Important note For U20 product you can unlock the door by turning the turn piece or pressing ai on the interior lock face 14 2 3 4 Right of Passwords and Fingerprints o Add fingerprint and user password Administration Delete all fingerprints and all passwords except for PO password Unlock the door Unlock the door Add all fingerprints and user password Administration Delete all fingerprints and all passwords except for PO Unlock the door User fingerprint Unlock the door 2 3 5 Points of Fingerprint Acquisition fingerprint As most information of fingerprint template comes from fingerprint center please put the finger in the right position during acquisition as well as verification Method put the finger on the reader moderately Refer to the following figures E Put the finger on the center of reader OK NO NO fe Keep the finger flat on the reader OK NO NO i Press the reader gently OK NO a ES 1 Keep the finger stable do not move OK NO 2 3 6 Emergency Power Supply In case that battery runs out and mechanical key has not been taken along an external 9V battery 6F22 9V can work as an emergency power suppl
11. ime It is recommended to check the screw condition once every six months or one year Add some graphite powder or pencil powder to the keyway regularly six month or one year or when the key cannot inserted or pulled out smoothly However any oil is rejected so as to prevent the grease sticking the ball spring and the cylinder cannot rotate and unlocked 21 4 2 FAQ 1 After verification Cause incorrect installation of lock Mechanical successful the green problems LED light will be on but the door can not be opened installed incorrectly The mechanical wrong The cylinder is d A 2 Can not unlock the The cylinder is damage door by mechanical key 3 The mortise is damaged 4 There are some mechanical problems with clutch 3 Rotate the exterior lever but the latch can not retract completely Dirt bonded on parts has blocked the cylinder This fingerprint has not been enrolled This fingerprint has been deleted The position of the effective fingerprint is offset too much 4 After verification red LED light is on and short beep is heard but the door can not be unlocked This fingerprint is damaged The finger is too dry or wet or cold Press the reader too tightly so that the fingerprint is deformed Press the reader too slightly or most of the finger is not on the reader 8 Influenced sunlight by direct 22 of mortise or the l
12. l the fingerprint you can set the fingerprint number and every 11 number is just for one fingerprint 0000 is the default number of administration fingerprint and other numbers are of user fingerprint 2 3 2 Management of Passwords and Fingerprints Phenomena when the operation is Procedures successful 1 Remove battery pack cover Clear all Digital key backlighting light will be on fingerprints 2 Press and hold fingerprint Long beep will be heard 00 will be key ifor 10 seconds displayed on the nixie tube and green LED light will be on 1 Remove battery pack cover Long beep will be heard PO will be Set re e vo renin displayed on the nixie tube And then a wes a y will be displayed on the nixie tube and son p will flash tee il will be displayed on the nixie tube Long beep will be heard And green LED light will be on Long beep will be heard and green LED light will be on PO will be displayed on the nixie tube 4 Press to confirm 1 Verify administration password Enrollment of 2 Press Key 1 1 will be displayed on the nixie tube administration 3 Press to confirm FOOO will be displayed on the nixie tube fingerprint and start the function of add fingerprint 4 Press to confirm Light on the reader will be on E l er Long beep will be heard and green LED 9 5 Fingerprint acquisition light will be on 1 Verify administration Long beep will b
13. ock cylinder wire harness is damaged or key is Use correct mechanical key Please turn to professionals for help Try to open the door first and invite a professional to check the replace the new lock and damaged parts with ones Please turn to professionals for help Unlock the door with enrolled fingerprint or password or mechanical key Verify the fingerprint again Put the finger flat on the reader and narrow the distance between reader and finger or unlock the door by password or mechanical key Enroll one fingerprint again It is recommend that one user enroll over 2 fingerprints or unlock the door by password or key Keep the finger wet dry warm before verification or unlock the door by password or mechanical key Use the correct method to verify the fingerprint again Use any opaque object to cover the light and then verify the fingerprint o Pomem O OOO case tation 5 After verification of A enrolled password or OTe connection Wire i Invite a professional to check fingerprint the motor is OOSEDED the door lock and replace the not activated and the Problems with motor damaged parts door can not be unlocked Check the battery after unlocking the door by emergency power supply or 6 No response from AIIENSiocn mechanical key keypad The connection wire harness for exterior and interior assemblies IS loosened The batteries run out or the positi
14. s please follow the 1 1 template in the packing list e Ene a a 6 5 are E 714 00 A y ta a o o i e 81 i i te ee eat aa N 3 231 2 s i m fo han osas y es 1 o 4 0 or pe eS o i a Y tl 3 8 Centerline of Loc fD Pa AE ai eA 6 i 4 j so 12 5 x i p Centerline of handle So S3 Y Mo gt 2 gt T E seg KEE hl eE SH E i _ 620 t i e casos IO A o m22 j 5910 3 1 Template of door lock gl 4 5 CUNITS mm 204020039 SCALE 1 1 3 2 2 Step 2 Drilling Holes for Striking Box As shown in figures below process the striking hole and make sure that it is at the same height with the lock and that it aligns with the edge of door when closed Tapping screw for wooden door A Metric screw for iron door PLA AER es Be y A T ye 27 p aL 2 5 we we T PE alts A l gt aca e
15. ss E EX on Interior lock face the keypad will exit from locking protection status 2 2 Optional Functions 2 2 1 Normally open Function This function is applicable for U10 as well as U30 Method to activate the normally open function When successfully open the door with user fingerprint or user password long beep will be heard once the motor will be activated and the lock is in unlocked status At this time press 0 long beep will be heard once the normally open function will be activated In this condition the door can be opened only by rotating the lever and the green LED light will flash every 2 seconds Method to cancel the normally open function Use the fingerprint or password to unlock the door and do not press any numeric key the normally open function is cancelled 2 2 2 Latch Bolt Alarm Function When the door is not closed completely the latch bolt retracts a little the red LED light will flash and short beeps will be heard This function is applicable for U20 and U30 2 2 3 Connecting the Handset Function It s applicable for locks with handset Refer to manual of handset for details 2 2 4 Access Control Function After successful verification of fingerprint or password the door can be unlocked only within the time period allowed by the access control function If the verification is in the prohibited time period the user number will be displayed on the nixie tube and alarm signals will be heard and the
16. tallation Check 2 2 5 for more details 1 5 Technical Parameter e Emerenoy power supply DOV control system Single circuit Password capacity 10 Fingerprint capacity 100 1 Password length 9 digits 1 digits ID NO 8 digits password 2 Match time lt 1 second 5 o o Note Parameters subject to change without prior notice for technology innovations by the company 2 Operation 2 1 Basic Functions 2 1 1 Unlock Ways By fingerprint 2 1 2 Alarm Function 1 Low battery warning When the lock is in low battery short beep as warning signal will be heard for three times and red LED light flashes every time when unlocking the door by fingerprint or password emptying enrolling or deleting fingerprint Please replace the battery timely The enrolled fingerprint and other settings will not be affected during the replacement of battery 2 Tamper alarm When the exterior case of lock assembly is removed and opened forcibly short beeps as warning signals will be heard for 30 seconds and yellow LED light will flash 2 1 3 Pseudo Password Alarm When incorrect passwords are input for 3 consecutive times within 15 minutes the keypad will enter into the locking protection status and be locked for 15 minute In this condition if any numeric key is pressed alarm signals from the buzzer will be heard Alarm disabled method During the locking period if fingerprint verification is successful or pre
17. tration password input 9 digits i e 1 digit password number and 8 digit password Please keep administration password in mind after setting of it 3 Fingerprint acquisition method When the light on the reader is on put the finger on the reader and the long beep will sound three times it is indicate the acquisition is done If there is just a two short beep it means failed 4 The administration fingerprint and the administration password can add all fingerprints and passwords and delete all fingerprints and password except PO The administration password PO can only be changed by the settings of administration password 5 Only an administration fingerprint number 00 and an administration password number PO can be enrolled if handset is not included in operation Other numbers are for user fingerprints and user passwords which only have the right to unlock the door If handset is included in operation 3 administration password and 20 administration fingerprint can be enrolled in maximum 2 3 3 Unlock Ways Unlock Phenomena when the door is ways successfully unlocked 1 Slide up the sliding cover and Light on the reader and green LED light press MO will be on By Long beep will be heard fingerprint fingerprint 2 Verify the enrolled fingerprint number will be displayed on the nixie tube green LED light will be on 3 Open the door et Password number will be displayed on 1 Input the enrolled password a By the nix
18. ve and negative poles Invite professionals to check the lock after unlocking the door by mechanical key 7 After verification of enrolled password or The lever does not return Verify enrolled password or fingerprint the motor is when verifying the fingerprint fingerprint after returning the activated but the exterior or password lever lever turns uselessly and the door cannot be No spindle is installed in the Invite professionals to check unlocked lever the lock 8 The door lock is in Probl tiara E roblems wi normal open ar Invite professionals to check normally closed status ie lock and cannot be used No spindle is installed in the Me OCK normally lever 23 5 Appendix 5 1 Packing list NON E mnt A Screws for mortise and striking plate optional Mechanical key User manual Template Warranty card 10 Certificate of quality 11 AA batteries 5 2 Tools for Installation Alloy bit 10 Alloy bit 60 Ribbon saw 1 Power board 1 24
19. y Connect it to the interface at the bottom of the exterior assembly to supply power And then unlock the door by fingerprint or password 15 2 3 7 Installation of Batteries Method to install the batteries Remove the battery pack cover upward and install four AA 1 5V batteries and then the battery pack cover Notes select the correct type in case of explosion when out of service for a long period batteries should be taken out never mix the new battery with the used pay attention to the positive and negative poles of batteries preserve the environment by handing over the used batteries to the designed place for reclaim keep batteries out reach of children and pets in case of contact with skin clothes or eyes flush with water and go to doctor 16 3 Installation and Adjustment 3 1 Installation Sketch STR 02 EN I 01 Battery pack cover 09 Interior shim plate 02 AA batteries 10 Countersunk flat head tapping 03 Screw cover screws 04 Round head flat nose metric screws 11 Mortise 05 Interior assembly 12 Exterior assembly 06 Spindle 13 Wooden door 07 Cross recessed raised countersunk 14 Frame head screws 15 Striking box 08 Interior mounting plate 16 Striking plate 17 3 2 Installation 3 2 1 Step 1 Drilling Holes on the Door This product is applicable for wooden doors The hole pattern figure is as follow

Content

Contents

Download Pdf Manuals

Related Search

Related Contents