Instruction Manual
Contents
1. Page 1 of 4 5400 5404 Life Care Recliner CUSTOMER INSTRUCTIONS PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT If you have trouble understanding these instructions contact your dealer or Winco customer support 800 237 3377 before attempting to use this product otherwise injury may occur Winco assumes no responsibility for damage or injury caused by improper assembly installation use or maintenance of these products READ AND FOLLOW ALL DIRECTIONS NEVER use tables as a restraint DO NOT put hands feet or clothing into any openings when changing recliner positions Attendant MUST confirm that users hands amp feet are clear of moving parts when changing recliner positions or INJURY MAY RESULT Stay clear of the recline mechanisms Periodically recheck tightness of all nuts bolts and screws NEVER use the tables or chair arms or backrest or legrest as a seat SERIOUS INJURY MAY OCCUR Chair MUST be in full upright position with casters locked when a patient enters or exits chair NEVER allow a patient to exit a reclined chair with position lock engaged or SERIOUS INJURY MAY RESULT Lock casters at all times except when transporting chair Chair must ALWAYS be positioned on a level surface DO NOT use recliner for Transporting in or with ANY type of vehicle or trailer Winco recliners have not been tested or approved for use by an occupant in any type of vehicle or trailer Immediately rem2. adrest Torso Support Side Cushion IV CHOO TS00 SC00 Visit our website www wincomfg com product documents parts lists for a complete parts list catalog of your chair or call Customer Service 1 800 237 3377 to request it by mail 006324 Rev E Date 06 27 13 JWC Page 4 of 4 5516 SW 1 Lane Ocala Fl 34474 Phone 3352 854 2929 800 237 3377 e Fax 352 854 9544 E W ea Ince mi fe co mi LIMITED WARRANTY customerservicea wincomfe com TERMS Winco Mie LLC warrants this product to be free of manufacturer s defects in material and workmanship provided that the product is used according to normal operating conditions and praper maintenance intended by manufacturer This warranty is available only to the original retail purchaser is non transferable and commences on the date of retail sale proof of purchase required Limited One Year Product Warranty Winco Mfg LLC warrants the complete product for one 1 year At Winco Mfg LLC sole discretion it may repair or replace any components freight tree that are found to be defective during the first year Winco Mig LLC shall not be liable for any labor or any ofher cosis incurred as a result of or in conjunction with a warranty claim Limited Three Year Warranty Winco Mfg LLC warrants recliner mechanisms electrical components vinyl panels and Vinyl on upholstered parts from cracking or delaminating pressurized gas springs and casters when new for a period of thre
3. dically recheck tightness of all screws and bolts and never use the chair arms backrest legrest or tray as a seat or the tray as a restraint Operating Instructions for OPTIONS available for your recliner Lateral Supports LS option only 1 Use Phillips screwdriver to loosen the upper Back Frame screw do not remove 2 Position the T slot on Lateral Support Bracket around the screw between Back Frame and Upholstered Back 3 Be sure that screw is seated completely in T slot and Lateral Support drops down into T slot 4 Re tighten the upper Back Frame screw REPEAT FOR BOTH SIDES Continued on next page 006324 Rev E Date 06 27 13 JWC Page 3 of 4 Side Table To position side tables 1 To raise table grasp center of table and gently raise into place Table will automatically lock into place when released 2 To lower table grasp table at the center raise and pivot down in one movement Pivot Table k Lap Position 1 To place pivot table in lap position pivot the table away from chair and pull over lap 2 Tighten star knob to secure the pivot table in the lap position Exit Position 1 With the table in the lap position loosen star knob amp push table away to exit chair Remove Pivot Table 1 Loosen pivot table star knob 2 Pull up on pivot table until the table stem comes out of the black bracket Other available Options IV Pole Contoured He
4. e 3 years At Winco Mfg LLC s Sole discretion tt may repair or replace components found to be defective Winco Mie LEC shall not be liable for any labor shipping or any oiher costs Incurred as a result of or in conjunction with a warranty claim Limited Lifetime Frame Warranty Winco Mfg LLC warrants steel and aluminum base frames for all products when new for the lifetime of the original purchaser This limited warranty does not apply to paint finish or any components attached to the frame such as upholstery foam casters mechanisms or related parts that are covered under above warranties Winco Mie LLC shall nol be liable for any labor shipping or anv other costs incurred as a result of or in conjunction with ad warrany claim The purchaser s exclusive remedy under this warranty shall be limited to such repair or replacement of defective components at Winco Mfg LLC sole discretion For warranty service contact the dealer that the product was originally purchased from or Winco Mfg LLC directly EXCLUSIONS There are no other warranties conditions representations or guarantees express or implied made or intended by Winco Mfg LLC and all other warranties conditions representations or guarantees including any warranties conditions representations or guarantees under any Sale of Good Act or Like legislation or statute 1s hereby expressly excluded Any and all other implied warranties shall not ex
5. ove from service Any recliner with broken recline mechanisms torn upholstery or other mechanical or visible damage USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS NEVER EXCEED the recommended weight capacity of 275 Ibs 124 7 kg SAVE THESE INSTRUCTIONS for future reference and training 1 2 3 ee ae Se D NOT LIFT OR CHANGE CHAIR POSITION BY USING THE LEGREST THIS COULD CAUSE INJURY TO USER OR DAMAGE TO THE RECLINE MECHANISM AND WILL VOID WARRANTY ALWAYS CHANGE POSITION FROM BACK OF CHAIR 5400 5404 Weight Capacity 275 Ibs 124 7 kg Tools needed Scissors or box cutter to aid in removal of packing material If Optional Lateral Supports LS ordered you will need a Phillips screwdriver for assembly PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY Install the Back 1 After checking your product for any shipping damage chair needs to be positioned upright on level surface Remove packing material amp hardware Cut tape amp plastic with scissors being careful not to damage upholstery 2 Slide the Back Frame over the 7 8 tubes of the Seat Frame FIG 1 amp 1A NOTE To ease assembly spray the Seat Frame Rail ends with WD 40 or similar lubricant approved by your facility 3 Depress the Snap Button in Seat Frame while pushing down on one side of Back Frame FIG 1 amp 1A 4 Repeat procedure on opposite side until both Snap Buttons are sna
6. pped into corresponding holes of Back Frame NOTE Snap buttons must protrude out of holes on back frame FIG 1A 006324 Rev E Date 06 27 13 JWC Page 2 of 4 WARNING Failure to lock back and seat frames together may cause injury Operation of the Chair 5 NON RESTRAINT To make the chair permanently non restraint unbolt the Position Lock Bar from the back of the chair 6 POSITION LOCK Attendant may hold the chair in a reclined position by engaging the Position Lock To safely accomplish this recline the chair to the 2 or 3 recline position and lower the Position Lock with your hand until the notches on the Position Lock bars engage with the Position Lock Pins To release Position Lock raise the Position Lock off of the Pins and return chair to upright position WARNING Attendant must release Position Lock before patient can exit chair If patient attempts to exit chair with Position Lock engaged SERIOUS INJURY MAY RESULT WARNING Failure to release the Position Lock before changing positions will result in damage to the chair and void the warranty 7 To ensure proper operation of the reclining mechanism lubricate all pivot points with a silicone lubricant at least twice yearly Wrinkles in Vinyl Storage and shipping can cause wrinkles of the vinyl on your Winco chair This is normal Please allow 1 2 weeks at room temperature approx 70 degrees to allow for vinyl to expand back to original appearance Perio
7. tend beyond the duration of the express warranty Liability for incidental or consequential damages 1s excluded to the extent permitted by law Some states do not allow the exclusion or limitation so the above limitation or exclusion may not apply to you This warranty gives you specific legal nghts In addition you may also have other nghts which vary trom state to state GENERAL PROVISIONS No warranty herein contained or set out shall apply when damage or repair 1s caused by any of the following 1 Damage in transit 2 Accident alteration abuse or misuse of product i e exceeding weight capacities applying inordinate pressure to footrest leg rest use in Mental Health facilities like institutions or any unintended use of the product or use in unintended environments 1 e outdoor showers MRI rooms etc 3 Fire water damage theft war riot hostility acts of God Examples comained in this list are notte be construed as all inclusive Design appearance parts amp construction are subject to change without notice 006324 Rev E Date 06 27 13 JWC
Download Pdf Manuals
Related Search