User Manual DVM-HDBT-RXLPOC
Contents
1. interference in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference Any changes or modifications not expressly approved by the manufacture would void the user s authority to operate the equipment E FE Fe SA 1 RAL c or Q 6 6 Ola S SiWwO HDBaseT Receiver with PoC SAFETY PRECAUTIONS To insure the best from the product please read all instructions carefully before using the device Save this manual for further reference Unpack the equipment carefully and save the original box and packing material for possible future shipment Follow basic safety precautions to reduce the risk of fire electrical shock and injury to persons Do not dismantle the housing or modify the module It may result in electrical shock or burn Using supplies or parts not meeting the products specifications may cause damage deterioration or malfunction Refer all servicing to qualified service personnel To prevent fire or shock hazard do not expose the unit to rain moisture or install this product near water Do not put any heavy items on the extension cable in case of extrusion Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards Install the device in a place with fine ventilation to avoid damage caused by overheat Keep the module away from liquids Spillage int2. technology to deliver HDMI signal two way IR control bi directional RS232 data up to 70m with perfect quality It also supports CEC and PoC It works well with HDBT transmitters or other devices boasting HDBT OUT port 1 2 Features Support Full HD Delivers resolutions including 800x600 60HZ 1024x768 9 Hz 1280x720 60HZ 1280x1024 60Hz 1366x768 60Hz 1600x1200 260Hz 1920x1080 60Hz 1920x1200 60Hz 3D 4K X 2K Max transmission distance is up to 70 meters over single CAT5e CAT6 cable High Bandwidth 10 2Gps HDTV Compatible use HDMI 1 4 and HDCP compliant Support PoC amp CEC Connect with a displayer to transmit EDID and HPD signals constantly by using a CAT5e cable Use HDBaseT technology Bi directional RS232 IR control LED indicators show work status Wall table mountable aluminium enclosure PT case design 1 3 Package List lt 1 HDBaseT Receiver lt 2x Mounting brackets 4 Screws lt 1 RS232 cable lt 4 Plastic cushions lt 1 User Manual Notes Please confirm if the product and the accessories are all included if not please contact with the dealers HDBaseT Receiver with PoC 2 Product Appearance Lite Malan Tx Rx O HDBTIN HDMIOUT IRIN IR OUT RS232 r ttt tq 60620 Description 00 Working status indicator blink when the device is working e el Twisted Pair link status indicator illuminates when the port has a LI
3. years which starts from the first day the product leaves warehouse check the SN mark on the product Proof of purchase in the form of a bill of sale or receipted invoice must be presented to obtain warranty service 2 What the warranty does not cover Warranty expiration Factory applied serial number has been altered or removed from the product Damage deterioration or malfunction caused by Normal wear and tear Use of supplies or parts not meeting our specifications No certificate or invoice as the proof of warranty The product model showed on the warranty card does not match with the model of the product for repairing or had been altered Damage caused by force majeure Servicing not authorized Other causes which does not relate to a product defect Delivery installation or labor charges for installation or setup of the product 3 Technical Support Email to our after sales department or make a call please inform us the following information about your cases Product version and name Detailed failure situations The formation of the cases Remarks For any questions or problems please try to get help from your local distributor SOMMER CABLE SOMMER CABLE GmbH Humboldtstra e 32 36 75334 Straubenhardt Germany Telefon 49 0 7082 49133 0 Support Tel 49 0 7082 49133 10 Fax 49 0 7082 49133 11 E Mail info sommercable com Internet www sommercable com
4. NK connection HDCP compliance indicator illuminate green when the connected N device supports HDCP blink green when the connected device does not support HDCP POWER Illuminate red when powered on LED Connect to the HDBT OUT port of other devices e g HDBaseT Transmitter with a CAT5e cable support bi directional PoC HDMI OUT Connect to HDMI display Connect with IR receiver the IR signal received from this port can only send out via other devices e g HDBaseT Transmitter HDBT IN IR IN Q e Connect with IR transmitter the sent IR signal are received by IR OUT other devices e g HDBaseT Transmitter Serial port 3 pin captive screw connector connects with the RS232 ER control terminal supports bi directional RS232 control Connect with power supply not necessary if the other device s connects with power and supports PoC DC 24V LL Pictures shown in this manual are for reference only HDBaseT Receiver with PoC 3 System Connection 3 1 Usage Precautions 1 System should be installed in a clean environment and has a prop temperature and humidity 2 All of the power switches plugs sockets and power cords should be insulated and safety 3 All devices should be connected before power on 3 2 System Diagram The following diagram illustrates typical input and output connections that can be utilized with HDBaseT Receiver Transmitter 2
5. SOMMER CABLE gt 9 User Manual DVM HDBT RXLPOC DVM HDBaseT Receiver 70m PowerOverCable All Rights Reserved Version DVM HDBT RXLPOC 2015V1 0 HDBaseT Receiver with PoC Preface Read this user manual carefully before using this product Pictures shown in this manual is for reference only different model and specifications are subject to real product This manual is only for operation instruction only not for any maintenance usage The functions described in this version are updated till March 2015 Any changes of functions and parameters since then will be informed separately Please refer to the dealers for the latest details All product function is valid till 2015 6 10 Trademarks Product model and logo are trademarks Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner No part of this publication may be copied or reproduced without prior written consent FCC Statement This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications It has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a commercial installation Operation of this equipment in a residential area is likely to cause
6. e same TIA EIA T568A eel TIA EIA T568B Pin Cable color BN VJ Cable color orange orange white 1 green green white 4 blue brown white white 8 brown 1st Group 12 45 38 FJ 3rd 12345678 _ orange __ brown white brown 154 ou as 3rd Group 4th Group Note To make a better transmission cable connectors MUST be metallic the shielded layer of cable MUST be connected to the connector s metal shell HDBaseT Receiver with PoC 4 Specification Input amp Output 1 IR 3 5mm mini jack Input 1 HDBT RJ 45 1 RS232 3 pin pluggable terminal block 1 HDMI HDMI female Output 1 IR 8 5mm mini jack 1RS232 3 pin pluggable terminal block Video Signal HDMI1 4 Audio Digital audio transmit through HDMI audio Transmission Mode HDBaseT 800x600 260Hz 1024x768 Hz 1280x720 60Hz Resolution 1280x1024 60Hz 1366x768 60Hz 1600x1200 60HZz 1920x1080 260Hz 1920x1200 60Hz 3D 4K X 2K lt 0 005 1KHz Dimension W H D 110 x 77x 30 mm Weight 0 5Kg All nominal levels are at 10 HDBaseT Receiver with PoC 5 Panel Drawing 110 03 mm 30 00 mm HDBaseT Technology HDCP Compliant 4Kx2K Support e 60m with PoC 77 00 mm HDBaseT Lite Receiver PoC ur m M OUT IE O Om ON LINK OUT xt rm e dicc HDBTIN HDMIOUT IRIN IROUT RS232 DC24V 6 Troubleshooting amp Maintenance Problems Ca
7. ee ae YL Rs232 lt a lt gt lt gt Gastro panel A BP R Emitter a IR Remote SE D DVD CAT5e 3 3 Connection Procedure Exampled by connecting to HDBaseT Transmitter Step1 Connect HDMI source such as Blue ray DVD to HDMI IN port of HDBaseT Transmitter with HDMI cable Step2 Connect HDBT OUT port of HDBaseT Transmitter to HDBT IN port of HDBaseT Receiver through a CAT5e CAT6 cable Step3 Connect a HDMI displayer such as HDTV to HDMI OUT port of HDBaseT Receiver with HDMI cable Step4 Both HDBaseT Transmitter and HDBaseT Receiver have IR IN and OUT When one end is used as an IR receiver the other end will be used as an IR transmitter For example When IR IN of HDBaseT Transmitter connects with an IR receiver the IR transmitter must be connected to IR OUT of HDBaseT Receiver Step5 Connect the RS232 port of the devices to be controlled and the receiver or the transmitter Step6 Connect with DC 24V power adaptor s One is sufficient as the other end can be 3 HDBaseT Receiver with PoC energized with PoC function 3 4 Application HDBaseT Receiver has a good application in various occasions such as computer realm monitoring big screen displaying meeting room education and bank amp securities institution etc 3 5 Twisted Pair Cable Connection The twisted pair used in this extender MUST be a straight through cable The connectors can be T568A or T568B but both sides must be th
8. o the housing may result in fire electrical shock or equipment damage If an object or liquid falls or spills on to the housing unplug the module immediately Do not twist or pull by force ends of the optical cable It can cause malfunction Do not use liquid or aerosol cleaners to clean this unit Always unplug the power to the device before cleaning Unplug the power cord when left unused for a long period of time Information on disposal for scrapped devices do not burn or mix with general household waste please treat them as normal electrical wastes HDBaseT Receiver with PoC Contents Ds UC T 1 1 Introduction to HDBaseT 1 2 Features m We Package x 2 Prod ct Appearance acc MU ARN MR cet 3 System GONNECHON ee ee 3 1 Usage Prfecalitions Sarasin nee 3 2 OV SIGN Diagramm a einer 3 9 ConnecHor POCO God eee reno gets oO saure eei mui ae eR P 3 5 Twisted Pair Cable CornectlOn iiie eere coco eee aaa A ODECA epp Hn S ANG DIAWING ERREUR 6 Troubleshooting amp Maintenance 7 After sales SeiVIl e ee een eine ee HDBaseT Receiver with PoC 1 Introduction 1 1 Introduction to HDBaseT Receiver HDBaseT Receiver adopts HDBaseT
9. uses Solutions h ncorrect setting on the Check the display s setting Poor quality of output display images or Bad quality of the cable ry another high quality connection cable Check with oscilloscope or multimeter if there is any signal at the input output end No output image Make sure the connection is Fail or loose connection good h ler f Thereadenderie broken Send it to authorized dealer for repairing Wrong RS232 Make sure the RS232 communication parameters communication parameters are correct No ne at the input output Cannot control the device by control device e g through RS232 port The device has already been Send it to authorized dealer for broken repairing Static becomes stronger when connecting the video connectors Cannot control the The device has already been Send it to authorized dealer for device by 5232 IR broken repairing Check the grounding and Bad grounding make sure it is connected well HDBaseT Receiver with PoC LL If your problem persists after following the above troubleshooting steps seek further help from authorized dealer or our technical support 7 After sales Service If there appear some problems when running the device please check and deal with the problems reference to this user manual 1 Product Limited Warranty We warrant that our products will be free from defects in materials and workmanship for three
Download Pdf Manuals
Related Search