User Manual
Contents
1. 3 Under after use or turned off 12V output load do not take cameras and other equipment 4 Do not use other 12 6V lithium battery charger please only use the original charger The above points can extend battery life Performance Parameters2. images can be displayed on the screen It supports TVI2 0 Resolution and frame rate include 720P25 30 50 60 1080P25 30 6 kinds TVI video mode LTS coaxial control Coaxitron function Currently only supports LTS Coaxitron protocol access LTS TVI camera or dome camera press MENU key to call up the TVI camera or TVI dome camera s built in menu Some LTS TVI cameras does not have built in menu You will not be able to call up the menu Please check to confirm whether your camera supports built in menu TVI Camera menu use the arrow keys and the Menu button to complete the menu changes Modifying the TVI dome menu is similar to a normal dome camera Use the iris and focus function keys Use the function keys to adjust the TVI dome camera s movement or lens zoom VGA HDMI input Please keep TVI switch to the OFF position Access the corresponding signal source is switched to the corresponding source mode the maximum resolution Can support up to 1920 1440 Analog Video Input Please keep TVI switch to the OFF position Source switching to AV1 the source interface VIDEO IN Insert to display the image of an ordinary analog camera 12V Output 12V output maximum support 2A the maximum power output is 24W You can use the charging port multiplexing 12V DC output and combination line output port Special attention to the following points 1 When not using TVI mode close TVI switch 2 After use turn off the main power switch
3. Package Contents Important Safety and Warning Information Product Appearance Security Tester Manual Handle with care during transport to avoid damage Device should be stored in cool and dry climates Avoid using in harsh environments high temperatures or direct sunlight Be careful with The TFT LCD as it is fragile Do not place device on the front or rear windshield Direct sunlight will increase temperatures of unit and may cause lithium battery explosion BNC Adapter 2 PCS 1 PCS or UNS 6 Please check your local electrical requirements 1 TVI Power 7 VGA Input 7 If there is a problem with your device please contact customer service 2 CVBS Input 8 TVI Input Output Do not attempt to repair or service your device 3 HDMI Input Color Bar Output 8 Taking apart or repairing the device will void the device s warranty 4 Activation 12V Output 5 12V Output Charge 9 Power 6 TVI Input Security Tester Features 7 TFT LCD Monitor e PAL NTSC Auto OSD Menu 12V 2A Output Sleep Color Bar CVBS Output MENU Menu e LTS Coaxial Control Protocol A Up e CVBS Input v Down e Multi Functional Combination Interface e VGA HDMI Input e 18650 Li ion Battery x3 HD TVI2 0 720P 1080P lt gt Video Switch Coaxial control button Battery Cover TVI 2 0 CVBS HDMI VGA Input 7 TFT LCD 18650 Li ion Battery 12V Output OSD MENU Input Color Adjust VGA HDMI OSD Funct
4. ion EXIT E TTT TTT FATT AV TVI VGA HDMI Brightness Contrast Hue Saturation Color Temp Auto Config H Position V Position Phase Clock Language H Position V Position OSD Time out Transparent Reset Display Ratio Sleep Blue Screen Sharpness Mode Power Saving Burnin Fast Operation 1 Power ON Switch power to ON the screen will light up If there is no video the screen will display a blue background The power indicator lights will turn red and blue simultaneously Access signal source and switch to the corresponding input mode AV1 HDTVI VGA HDMI There are 4 kinds of signals mode Open TVI modes Switching TVI to ON it will automatically switch to HDTVI interface no TVI signal will display color bars 2 No input signal will automatically enter power saving mode The LCD screen will be turned off during saving mode the chip goes into standby status and access can be resumed from standby The Wake button can also be used 3 Call Menu Programs set menu protect mode the input source can call up the menu 4 The icon is the sleep button and enters the standby mode If not in use please turn off main power 5 12V output using a DC adapter cable insert the corresponding 12V output port indicator lights means it is operational DC seat required supporting DC head size is 1 3mmx3 6mm During a short circuit overcurrent or under voltage condition the lithium battery protection board will discon
5. nect the battery You can use the ACT button to activate If the battery charge is low it cannot open device and feature will not work Recharge battery after activation 6 To shutdown turn the main power switch to OFF 7 To charge use the 12 6V lithium battery charger other non matching charger cannot be used A normal 12V charger will seriously damage battery and greatly shorten battery life 8 Replace the battery is not recommended to users It may cause burns or accidental damage Replacing the batter will void the devices warranty Proceed at your discretion Remove the back cover via 2 screws to access the batteries Battery protection board is encapsulated within the battery pack 9 Use buttons to control LTS coaxial function The whole system supports LTS dome cameras and ordinary TVI call Menu Parts of TVI LTS camera does not support the built in menu HD TVI Input 1 Turn TVI power switch to ON to access TVI cameras The screen will automatically switch to analog HD TVI source If no TVI video signal it will display color bars by default VIDEO OUT will simultaneously output analog video color bar VIDEO OUT line using a combination of yellow head 2 Access the TVI camera signal TVI IN combination of lines and red head is a loop through you can use any one of the input interface A combination which can be accessed online red head TVI camcorder DC head can output 12V power supply to the camera TVI cameras and TVI video
Download Pdf Manuals
Related Search