Home

NR4HLNR8HL User Manual

image

Contents

1. A V lt gt buttons on the remote control or use the mouse to specify the reaction to a video loss gt ALARM OUTPUT Specify the alarm output channel if a video loss occurs gt BUZZER Specify the output of the buzzer if a video loss occurs gt EMAIL Select to send an email if a video loss occurs To apply the change click lt AP P LY gt in the bottom of the screen When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Rw 49 System Setting System Event You can set any action to an event related to the disk recording network or system Like the other events you may notify the event to the user using the alarm buzzer output OSD pop up or email 1 From lt SYSTEM SETUP gt lt EVENT gt select SYSTEM EVENT gt 2 Use the A lt gt buttons on the remote control or use the mouse to specify the reaction to each event 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Disk gt OVERWRITE START EVENT if you set the disk write mode to lt OVERWRIT E gt this event occurs when the disk is full and the overwriting begins accordingly gt DISK FULL EVENT if you set the disk
2. CAMERA TITLE refer to Setup page 77 CAMERA TITLE CHANNEL IMAGE SETUP es COVERT SETUP MOTION SENSOR DISPLAY 4 Caw AUDIO 5 Cas USER Ce NETANA 1 i 9 4 Mobile Viewer Using GanzView with Android How to download the Android dedicated application From your smart phone access the Market Enter GanzView in the search bar to find it before downloading Install the application on your Smart Phone v The GanzView supports the 1 4 split screen mode With the GanzView Lite you cannot check the log control the PTZ operations or change the system settings To connect to DVR with GanzView 1 Select and run the GanzView 2 Use the Add button to select and add a site to the list GanzView 1 0 7 Add a DVR connection by using Menu gt Add Connection 3 Please enter a Name 4 Provide the IP address HTTP port number and RTSP port number and click lt Save gt 5 Provide the access ID of the DVR as well as the password 6 Select whether or not to save the ID and PW 7 Click lt Save gt Mobile Viewer 8 Select the site that you added in the DVR List Press and hold the mouse button to display the pop up window Connect Edit Delete 9 Select lt Connect gt and try to access If connected successfully you will see the screen as shown Split Mode 1 Click any area on the screen The main menu appears at the bottom of the screen Mobile Viewer
3. From the lt RECORD SETUP gt menu select lt CONTINUOUS MODE gt From lt OPERATION MODES you must set lt RECORD SETUP MODE gt to lt MANUAL CONFIGURATION gt before you can set the lt CONTINUOUS RECORDING gt 2 Use the A V lt gt buttons on the remote control or use the mouse to select either lt SIZE FPS QUALITY gt or lt SCHEDULE gt Size FPS Quality Setting RECORDING 1 Please select the day of the week to perform the continuous recording From lt OPERATION MODE gt F you must set the lt OSPCTHIOENDULE MODE gt iis of the lt MANUAL RECORD gt to lt WEEKLY gt AO before you can specify the lt DAY gt 2 Click a time cell from which you want to edit the SIZE FPS Quality and drag it to a desired cell Or use the A lt gt buttons on the remote control to move to the cell and press ENTER Then use the A V lt gt buttons to move to a desired cell and press ENTER again 3 When the cell selection is completet the SIZE FPS QUALITY table appears EJ Specify the lt RESOLUTION gt lt FPS gt lt QUALITY gt Gum and use of the lt AUDIO gt recording for each channel gt RESOLUTION set the size of the video recording gt FPS set the frame rate per second gt QUALITY set the recording quality gt AUDIO specify the use of the audio recording 4 When done click lt OK gt You can check the recording size in the size table under the time selection bar GSGGGG0
4. Press lt M gt to try to register the DDNS address forcibly gt EXTERNAL IP ADDRESS Indicate the IP address for the internet accessible from the NVR The NVR can be granted access with the web browser at http lt External IP Address gt lt Web Service Port gt The IP address can vary in a dynamic IP environment gt CONNECTED CLIENTS Shows the list of clients that are currently connected Press lt I gt to terminate the connection of an unwanted client forcibly Termination is limited to only users in a lower group than the current user return to the previous menu unue ee z g p eT l Network Map w a E gt IP ADDRRESS Indicates the internal IP address eE of the NVR SS SS SSS SS SSS n SSS aaa SS iL Detail Status You can check the details of the cameras that are connected to each channel Click lt gj gt in the right area of the list to show the details Click lt RESET gt in the IP CAMERA CONFIGURATION window to reset the IP camera When the IP camera settings are complete click lt OK gt System Setting System Setting You can configure the settings of date time system management and keyboard controller system Date Time Specify the current date and time 1 From lt SYSTEM SETUP gt lt SYSTEMS select lt DATE TIME gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to change the time or set the options as necessary
5. QuickLog Frem Audio Channel clo You can use the camera supporting the audio input to listen to the Selection audio Button Microphone Channel Selection Button e Start the panic recording Alarm Indicator a Network Check if network connection is made via an external PC or mobile Connection device Click this to view the details of the concurrent users and to Status check the network connection status For more information refer to Network Setup page 36 Disk Space Date amp Time 01 01 2012 Display the current time and date 03 24 48 Monitoring Timeline Press the gt button on the remote control or move the cursor to the right of the screen to display the timeline Double click the timeline to move to the video screen Drag and drop it to make backup or event search for the specified area Se Expand Collapse the timeline Expand or collapse the timeline Navigation through Timeline Display the recording data with time The color of each bar indicates the following Y Green Continuous Recording Timeline Bar v Red Alarm Recording v Blue Motion Recording v Yellow Panic Recording Quick Menu r ooo _ Description SSS O OO KEE Display the number of the current channel Channel No Start playing the video of the selected channel from the specified time Zoom Snapshot Capture Supported later Audio ON OFF W leige e ato at m NO simu Urn on or off the microphone
6. Recording will proceed only if an alarm event occurs gt MOTION ALARM RECORD Recording will proceed only if a motion is detected or an alarm event occurs gt INTENSIVE MOTION RECORD Normally recording will be performed in a low quality However the quality will switch to high if a motion is detected gt INTENSIVE ALARM RECORD Normally recording will be performed in a low quality However the quality will switch to high if an alarm event occurs gt INTENSIVE MOTION ALARM RECORD Normally recording will be performed in a low quality However the quality will switch to high if an alarm event occurs or a motion is detected Manual Configuration If you set the record mode to lt MANUAL CONFIGURATIONS the manual configuration window will appear where youcan set the manual recording and panic recording options gt MANUAL CONFIGURATION OPTIONS You can configure the recording settings by the time date and channel SCHEDULE MODE Set the recording schedule for a day daily or for a week weekly PRE RECORDING TIME Set the pre recording time POST RECORDING TIME Set the post recording time gt PANIC RECORDING OPTIONS Set the panic recording duration If it is set to lt MANUAL CONFIGURATIONS recording will continue until you turn it off manually 0 3 Record Setting Continuous Recording You can configure the settings of continuous recording time recording size frame rate per second and quality 1
7. gt ENTER buttons on the remote z control or use the mouse to select a lt DAT E gt for the EE schedule 2 Drag the mouse to resize the cell or use the on the A V lt buttons to move to the cell then press ENTER 3 Select a desired alarm output mode gt ON The alarm output is always turned on gt OFF The alarm output is always turned off gt EVENT Trigger the alarm output in sync with the event ae 4 Click lt COPY SCHEDULE gt to check the checkbox fs of the date that you want to copy the schedule at rae 5 When done click lt OK gt to apply the settings To apply the change click lt APPLY gt in the bottom of the screen 7 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu ms g var fan oon aze en Tea T o oe jar om To am ee us an f w f rej wu f ee Tan f es me E ma az a O Event Notification Specify the methods of notification such as buzzer video popup or email if an event occurs 1 From lt SYSTEM SETUP gt lt EVENT gt select lt EVENT NOTIFICATION gt 2 Use the A lt gt buttons on the remote control or use the mouse to select one from lt BU ZZER gt lt DISPLAY gt and lt EMAIL gt 3 Use the A V lt gt ENTER buttons on the remote control or use the mouse to set the output method and duration 4 To apply the change click lt APPLY
8. gt DATE TIME Set the current time and date Click lt J gt to adjust the time manually gt DATE FORMAT specify the date format gt TIME FORMAT specify the time format gt TIME SERVER obtain the current time from the time server Click lt gt to get the current time gt AUTO TIME SYNC automatically synchronize the time with the time server at a specific time gt SYNC AT Set the time to sync with the time server gt TIMEZONE specify the GMT standard time for your local area gt DST You can set up or release the DST Daylight Saving Time 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 39 System Setting System Management You can check update or reset the system information SYSTEM 1 From lt SYSTEM SETUP gt lt SYSTEM gt select P lt SSYSTEM MANAGEMENT gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to set each option of the system management FW UPDATE you can update the current software with the latest version FACTORY DEFAULT Return the NVR settings to the factory default SYSTEM DATA Save the system settings or get the system information from other device SAVE Store the NVR settings to a storage device Connect the storage device
9. lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Sequence Select a split mode for the sequence and also select a list of active items when the sequence is performed 1 From lt SYSTEM SETUP gt lt DISPLAY gt select amane a lt SEQUENCE gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to add a sequence or change the settings of the existing sequence gt ACTIVATION Select a list that you want to Activate the sequence for Only one list will become active gt ADD add a sequence 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu To add a sequence 1 Click lt ADD gt in the bottom of the screen 2 When the ADD dialog appears enter a title using the virtual keyboard 3 Enter the name of the sequence and click lt ADD gt 4 When the lt ADD VIEW TYPE gt dialog appears click lt ADD gt 5 When the SEQUENCE SETUP dialog appears Select a split mode that you want to add from VIEW TYPE gt 3 1 System Setting 6 If the selected split mode is CONFIRMATION displayed on lt VIEW gt select a channel you want to display in each split screen 7 Click lt OK gt The set Sequence mode is
10. to start saving 2 The video from the selected channel will be saved to the PC in the AVI format Default path C SaveFolder Click lt again to stop saving Click lt ActiveX Setting gt to display the context menu where you can change the saving path Print o 1 Click lt gt to start saving 2 The current screen will be printed with the printer connected to the PC Screen capture 1 Click lt ey gt path C SaveFolder Click lt ActiveX Setting gt to display the context menu where you can change the saving path ActiveX Settings 1 Click lt 8 2 When the setup screen appears you can change the settings of the render type audio capture and saving path as well as the video streaming gt Render DirectDraw is recommended in order to enable the hardware acceleration 3 If you want to change the saving path click lt _ gt Save Folder and specify a new path The Windows Vista user cannot change the saving path 4 Change the streaming settings according to the PC specification and network environment Auto mode is recommended gt Sync If this option is set the audio signal will be synchronized with the video signal However you may encounter a delay due to buffering for the synchronization Audio Sync Live CH Capture Type IPG BMP Stream IFrame only Type Main 7 Save Foler C Documents and Settings WKSH WH E SstAWipx Cancel gt Live CH Set the a
11. wi cej informacji o sposobach utylizacji starych urz dze nale y skontaktowa si z w adzami lokalnymi przedsi biorstwem zajmuj cym si utylizacj odpad w lub sklepem w kt rym produkt zostat kupiony deben desechar de forma distinta del servicio municipal de recogida de basura a trav s de puntos de recogida designados por el gobierno o las autoridades locales 3 La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar resqos potenciales para el medio ambiente y la salud publica Para obtener mas informaci n sobre camo deshacerse de sus aparatos el ctricos y electr nicos viejos pongase en contacto con su ayuntamiento el servicio de recogida de basuras o el establecimiento donde adquiri el producto 105 AMERICA CBC AMERICA CORP New York California http www cbcamerica com EUROPE CBC EUROPE LTD London http Awww cbceurope com CBC EUROPE LTD Milan http www cbceurope it cctv info cbce europe it CBC DEUTSCHLAND GmbH Dusseldorf http www cbc de com CBC POLAND Sp zo o Warszawa http www cbcpoland pl CBC Co Ltd MOSCOW REP OFFICE Moscow http Awww cbc ru CBC Beijing Trading CO LTD Beijin http www cbc china cn 10 CBC SHANGHAI TRADING CO LTD Shanghai http www cbe china cn 10 CBC SHANGHAI CO LTD GUANGZHOU OFFICE Guangzhou http www cbc china cn 10 CBC H K CO LTD Hong Kong
12. 1 From lt SYSTEM SETUP gt lt EVENT gt select lt MOTION SENSOR gt 2 Use the A lt gt buttons on the remote control or use the mouse to specify the ignorance interval and operation gt IGNORING INTERVAL Specify the minimum interval of the motion event occurrence For example even if you have set the minimum frequency to 5 seconds and another motion event occurs in less than 5 seconds after the last motion event occurred the new event will be ignored If too many motion events occur adjust to shorten the interval v Motion recording will be triggered immediately after the motion occurred regardless of the above settings gt ALARM OUTPUT Specify the alarm output channel if a motion is detected by the motion sensor gt BUZZER Specify the output of the buzzer if a motion is detected by the motion sensor gt VIDEO POPUP Select to display the video popup if a motion is detected by the motion sensor gt EMAIL Select to send an email if a motion is detected by the motion sensor 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Video Loss You can specify a reaction to the case where no video Is received from the camera 1 From lt SYSTEM SETUP gt lt EVENT gt select lt EVENT LOSS gt 2 Use the
13. 2 Click lt 0 gt in the top left corner to switch to 1 split mode click lt amp gt to switch to 4 split mode v Use the mouse to scroll the screen to the left or right to move to the next camera video screen Using the Log View 1 From the main menu click lt K gt You can check the log of the data stored 2 Select one from Alarm Motion Record Etc and click lt gt You will view the log of related items 9 7 Mobile Viewer Using the Search function 1 From the main menu click lt K gt You can view the video of the recording data 2 Select a desired time and date You can use the vertical time bar to specify the start time 3 Click lt gt to play the video recorded at the specified time 4 Click any area to display the play bar with which you can control the playing direction and speed of the video Using the Setup function From the main menu click lt Ed You will be connected to the web viewer site B BLS ne Teiu Smia a Pri nisl v You wFor details about each displayed item refer to Setup page 77 Archive Viewer You can play the data archived in the NVR You can play the HDD data recorded by the NVR Getting started with the Backup Player 1 Connect the NVR to the backup USB storage m ancir azoo osas device ae 2 Open the folder saving the archived images rates x t E F iip Plage 3 Run the Backup Player 4 Click lt a
14. C WDocuments and Settings WKSH My Documents Wty Pictures WSn Print Out Click lt S gt to capture the current video image Screen Shot v Selected Video Capture the actual frame of the current video v Screen Capture the visible portion of the current video v Format Select a saving format BMP JPG PNG v Path Specify the saving path Default location My Documents My Pictures Channel 1 CH ResHuton 1920 x 1080 _Wideo Time 2011 12 15 17 12 48 101 Archive Viewer Settings Click lt gt to configure the Backup Player settings EE You can check the version of the Backup Player v Maintain image aspect ratio Preserve the aspect ratio of the image aa If you do not mark this option the image will be Maintain image aspect ratio adjusted to fit the screen v About You can check the program information including the current version Settings 102 L Appendix Specification Details Item 8 CH VIDEO INPUT VIDEO 8 x IP Camera Max HD1080p OF CHANNELS 8 CH MAIN MONITOR MAINMONITOR RESOLUTION MOTION DETECTION AUDIO INPUT AUDIO OUTPUT AUDIO CODEC RECORDING CODEC REC RATE REC RESOLUTION ALRM I O ALARM INPUT ALARM OUTPUT STORAGE INTERNAL HDD SATA EXTERNAL STORAGE INTERFACES USB USB2 0 RS 485 RS 232 LAN REMOTE CONTROL EEC WATCHDOG COOLINGFAN POWER POWER SUPPLY POWER CONSUMPTION ENVIRONMENT HUMIDITY TEMPERATURE CHASSIS DIMENSION WEIGHT
15. Connect the HDMI cable between HDMI output port in the bottom rear panel and HDMI port of the monitor or use the HDMI to DVI cable to connect to the DVI port of the monitor Power Connection Two adaptors are provided one for NVR operation DC 12V and the other for PoE Power Over Ethernet DC48V NVR power connection Plug the provided DC 12V adaptor in the rear power port of the NVR PoE Switching hub power connection Plug the provided DC 48V adaptor in the rear power port of the NVR When done attach the adaptor cable clip to the rear panel and insert the cable in CAM3 CAM 5 CAM7 WAN UPLINK D pr CAM CAM 4 CAM 6 CAM 8 LANIDOWNLINK uD MONIT Adaptor cable retainer clip DC48V adaptor DC12V adaptor lt Make connection when the power is not applied yet lt Arrange up the cables and be careful not to peel off the cable coating lt Do not place the power cord under the carpet or rug The power cord is usually earth grounded However even if it s not earth grounded do never modify it on your own for earth grounding Do not insert multiple devices in a single power socket Otherwise it may cause a power overload For stable power supply this product provides two separate adaptors and two corresponding AC cords by factory default Make sure all cables are connected properly INSTALLATION Connecting the camera You can connect a PoE featuring IP camera to the rear CAM1 CAM8 RJ45 port using the CAT5
16. For backup only lt Ifyou need to connect a USB HDD with a high power consumption it is recommended to use a separate power source for that HDD INSTALLATION Network Connection PC connection in the local network You can connect NVR to a PC in the same network and control or manipulate it on the PC monitor Camerat a Pu o Camera2 S i E ET lt Cameras s A n Camera5 SBL y a yi Camera6 Camera7 Cameras Broadband Router IN Or M ha Hub Local PC ii Local PC 1 Connect the WAN UPLINK port in the rear panel to the router or hub 2 Connect the local PC to the router or hub WAN UPLINK Broadband Router or Hub Mtg a Le ae 5 N A i j a To e a HF 4 Local PC Local PC 3 Enter the address in the address bar web browser of the local PC or of the dedicated software program in the format of http IP address web service port Ex http 192 168 1 23 8080 The web service port is set to 8080 by default From the Network Setup screen you can change the port number 4 Provide the ID and password before logging in Then you can view the monitoring screen 5 Access ID factory default ADMIN P W 1234 v For the security purpose change the password right after you purchased the product INSTALLATION PC connection from a remote network You can connect NVR to a PC or mobile device in the s
17. HDDs A system failure or data loss caused by an incompatible HDD will void your warranty lt gt lt gt lt gt lt gt lt gt OVERVIEW ON W Key Features This product allows you to receive audio and video signals from a max of 4 8 CH 1080p H 264 network camera before saving them to the internal HDD Besides you can also transfer them to an external device that can be monitored on your PC or mobile phone remotely 44 444 4 4 Display the video from up to 4 8 CH 1080p network camera in real time Max 120 240 fps Save the video from up to 4 8 CH 1080p network camera in a max of 32 64Mbps 8Mbps per channel Max 120 240fps Play up to 4 8 CH 1080p video in real time Max 120 240 fps H 264 BP MP HP network camera supported BP Baseline profile MP Main profile HP High profile 4 8 built in port PoE switching hub 40W 72W Plug amp Play camera connection Protect the IP camera via secured closed circuit LAN environment Auto notification with self diagnosis HDD S M A R T temperature network connection status fan error etc Dual streaming supported for a remote display Auto resolution amp FPS adjustment for a remote service External eSATA HDD supported various search methods time event bookmark and thumbnail Mass storage backup via USB port or FTP server Dedicated smart phone applications that can be used with iPhone and iPad or on Android OS 1080p Full HD GUI OV
18. If no mouse movement is detected for from 5 seconds to 1 minute the status bar will disappear gt TIMELINE ON FULL SCREEN MODE select to show or hide the timeline in full screen mode AUTO HIDE place the cursor in the right corner to display the timeline If moving the cursor to the left the timeline will disappear ALWAYS ON The timeline will be displayed at all times ALWAYS OFF The timeline will not be displayed gt BORDER LINE specify the display of the cross border between channels in a split mode gt BORDER COLOR select a color for the border gt USER NAME specify the display of the currently logged in users on the status bar gt LANGUAGE select a menu display language 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 3 0 System Setting Monitor If you change from monitoring mode to sequence you will have to set the interval of the sequence 1 From lt SYSTEM SETUP gt lt DISPLAY gt select lt MONITOR gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to set a sequence interval for auto mode to 1 through 60 seconds 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click
19. N O Normal Open Normally the sensor is left Open If the sensor switches to Close an event will be triggered N C Normal Close Normally the sensor is left Close If the sensor switches to Open an event will be triggered gt LINKED CAMERA Set the camera to sync with the alarm sensor if it is triggered If you have set the alarm recording and the sensor detects the recording all synchronized cameras will start alarm recording gt ALARM OUTPUT Specify the alarm output channel if it is detected by the alarm sensor The alarm will be output to the specified channel gt BUZZER Specify the output of the buzzer if an alarm is detected by the alarm sensor gt VIDEO POPUP Select to display the video popup if an alarm is detected by the alarm sensor If there exist multiple lt _LINKED CAMERAS the video popup will be displayed in the maximum split mode gt OSD POPUP Select to display the OSD popup message if it is detected by the alarm sensor gt EMAIL Select to send an email if detected by the alarm sensor 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 48 System Setting Motion Sensor You can set an action to execute when a motion is detected For the settings of the motion sensor move to lt CAMERA SETUP3 gt
20. System iN Web browsers Internet Explorer 7 0 or later Mozilla Firefox 3 6 Google Chrome 4 1 Opera 10 Some web browsers other than Internet Explorer may not fully function CPU cs SIENE Display o Hard Disk Drive 50MB space required for installing the web viewer Additional HDD space is required for saving your recordings The file size of your recording may differ depending on the specified quality Connection Open a browser and enter the IP address of NVR or type the URL in the address bar WEB Remote Viewer Windows Internet Explorer To connect to the NVR from inside Y Check the Network Status and verify the wy iene lt P ADDR ES S and ANE B 5 E RVIC E p ORT Fie Edit view Favorites Tools Help of the NVR page 38 v Enter the IP address and web service port in the address bar of the browser Ex http 192 168 1 116 8080 7 1 192 168 1 116 WEB Remote Viewer To connect to the NVR from outside Using the IP address v Check the Network Status and verify the lt EXTERNAL IP ADDRESS gt and lt WEB SERVICE PORT gt of the NVR page 38 v If using a fixed external IP enter the external IP that is specified in the NVR in the address bar of the web browser Ex If the internal IP address is set to http 222 112 4 48 8080 192 XXx XXX XXX NO access from outside is allowed Using the URL v Check the Network Status and verify the lt DDNS ADDRESS gt and lt WEB SERVICE PORT
21. and end dates and times for your log search 3 Set the display order of the items found gt LATEST The most recent event will be listed on top gt OLDEST The earliest event will be listed on top 4 Click lt SEARCH gt You can check the log for your search at the bottom of the screen 5 Select a log to play the recording data Web Viewer Setup Click lt S ET UP gt to display the remote control screen for the NVR When done click lt OK gt to apply the changes to the remotely connected NVR v Ifthe NVR is in process of system or record setting the remote control will be disabled th you change the settings remotely at will the major Record Settings of the NVR may be changed which is not recommended at all Search Viewer ata Glance CAMERA TITLE Camera cana TT To name the camera title ue You can name the camera title that is displayed on AN each channel screen Select a channel to name and o E provide a new title Then click lt OK gt to apply it O UR v You can enter up to 9 alphanumeric characters for the camera title Image Setting a You can set the image of each channel When done click lt OK gt to apply the changes v The default color value is lt 50 gt Brightness Contrast Tint Color v Ifyou change the default settings the video from the NVR or the video color may not be displayed properly Covert Setting You can set to hide the video of a specific camera from a specifi
22. as well as the remote service port 1 From lt SYSTEM SETUP gt lt NETWORK gt select lt P SETUP gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to specify each item of the network settings gt DHCP If it is checked set the IP address of the NVR to Dynamic IP If the lt DH CP gt item is checked the sub items of IP address gateway subnet mask primary DNS server secondary DNS server will be filled in automatically Bi you select to obtain an IP address from the lt DHCP gt server when the lease time of the DHCP server expires you will lose connection to the IP camera momentarily while the network settings will be updated However the network connection will be restored soon It is recommended to use a fixed IP for stable network connection gt IP ADDRESS Provide the IP address gt GATEWAY provide the gateway address gt SUBNET MASK provide the subnet mask address gt 1ST DNS SERVER Enter the address of the primary DNS server gt 2ST DNS SERVER Enter the address of the primary DNS server gt RTSP SERVICE PORT port number that the remote client receives the NVR video from gt WEB SERVER PORT port number used for connecting to the NVR with the web browser gt PORT FORWARDING If you are using a router you can set the port forwarding so that external access to the NVR is enabled If the router does not support the uPnP protocol you must set the port forwarding m
23. gt 7 f you just want to reserve the data click lt RESERVE gt If the lt TAG NAME gt dialog appears enter the name and click lt OK gt Click lt RESERVE gt to save it to the HDD EPL COSTS Bala aero i E v Using lt RESERVE gt will compromise the recording days available When you have archived the reserved data to an external device it is recommended to delete the internal reserved data 8 To exit the Archive menu click lt CLOSE gt 65 Archiving Reserved data management You can search for the reserved data and delete or import it to a storage device 1 From the lt ARCHIVE gt meun select lt RESERVED DATA MANAGEMENT gt The reserved data will be listed 2 If you want to play the data double click a desired data item or click it and select lt P LAY gt aiessalhliads 3 If you want to import to a storage device connect it to the NVR and click lt EXPORT gt 4 If you want to delete the reserved data click lt gt next to the list Click lt CANCEL ALL gt to cancel reserving the whole page at once 5 To exit the Archive menu click lt CLOSE gt Playing the archived data You can search the storage device for the archived data and check the details of or play it 1 Connect the storage device containing ARCHIVING the archived data 2 When the storage device is recognized click lt GEARCH gt 3 To view the details click lt gt next to the list
24. gt in the bottom left corner to display the file browser Select the archived file to play Look in ARCHIVE_120101_052315 osem apaver 2 chO1 _120101051600_120101051644_00_3M8_ADMIN chOS_120101051600_120101051644_00_4M8_ADMIN My Network Fikes of bape All Supported Fies mul avi 5 Check the integrity of the archived file 6 When done the archived file will be played on the screen Archive Viewer Backup Player At a Glance 2 1 Setup Minimize Close 2 Channel Information Show the channel information and the video resolution 3 Play Time i 4 Play Time Display the current playback time 5 File Search Capture Print 6 Playback Control Control the playback direction and speed of the current video For more information about how to use the playback control buttons refer bar to Using the play page 64 7 Split Mode 8 Audio Setting Show the sound signal status and volume level 9 Play Bar Display the current playback postion in the video 1100 Archive Viewer Video Capture Snap Shot Click lt gt to capture the current video image v Selected Video Capture the actual frame of the current video v Screen Capture the visible portion of the current video v Format Select a saving format v BMP JPG PNG v Path Specify the saving path Default location My Documents My Pictures Video Selected Video Screen Path
25. http www cbc china cn 10 ASIA CBC S PTE LTD Singapore CBC THAILAND CO LTD Bangkok CBC CO LTD MUMBAI REP OFFICE Mumbai CBC CO LTD JAKARTA REP OFFICE Jakarta CBC TAIWAN CO LTD Taipei http Awww computar com tw AAA CBC Co Ltd www GANzZ jp 159 1 0 106
26. item that you want to edit gt DEFAULT LIVE AUDIO CHANNEL select an Audio channel to monitor on the live screen gt NETWORK AUDIO TRANSMISSION decide if NVR transfers the audio signal to the remote client gt RECEIVE NETWORK AUDIO decide if NVR receives the audio signal from the remote client To apply the change click lt APPLY gt in the bottom of the screen When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu AUDIO e 0 Buzzer output You can set to output the buzzer if you manipulate the remote control 1 From lt SYSTEM SETUP gt lt AUDIO gt select lt BUZZER gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select an item that you want to edit gt REMOTE CONTROL specify the output of a beep when you press a button on the remote control 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 33 System Setting User Setting You can configure the settings regarding user management and user and group permissions Management You can add a user account s that can be edited at a later time 1 From lt SYSTEM SETUP gt lt USER gt sel
27. message appears and you will return to the previous menu Event Setup Define various events and specify the conditions to notify the user in various ways Alarm Out Specify the alarm output conditions with the work schedule Alarm Out 1 From lt SYSTEM SETUP gt lt EVENT gt select lt ALARM OUT gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select lt ALARM OUT gt and configure the related settings gt NAME You can rename the alarm gt OPERATION Set the alarm output mode N O Normal Open It normally stays Open However if an event occurs it will switch to Close N O Normal Close It normally stays Close However if an event occurs it will switch to Open gt DURATION Specify the duration of the alarm output TRANSPARENT Keep the alarm out for as much time as the event lasts UNTIL KEY Keep the alarm out until a mouse or remote control button is pressed 5 300 SEC Keep the alarm out for as long as specified gt TEST Forcibly output the alarm for the test purpose 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt C LOS E gt in the lower screen The confirmation message appears and you will return to the previous menu EVENT 495 System Setting ON OFF Schedule You can activate or turn off the alarm output as scheduled 1 Use the A lt
28. signal of the selected channel Monitoring Using the status bar in the live mode Selecting a split mode Click a desired split mode from 1 4 9 6 and 8 split screen Or press the DISPLAY button on the remote control until a desired split mode is displayed v 4CH NVR model support only 1 and 4 split screen modes Auto sequence Click the Sequence button in the status bar or press the SEQ button on the remote control to perform the specified sequence mode You can configure the sequence settings in lt SEQUENCE gt For details refer to Sequence page 31 Zooming You can enlarge the monitoring screen for better view Zooming will enlarge the video of the selected channel If no channel is selected channel 1 will be zoomed 1 Click Zoom in the status bar or move the cursor to a desired channel and right click it to display the context menu Select lt ZOOM gt You can also press the ZOOM button on the remote control 2 Move to the zoom control screen When the menu bar appears in the right bottom use the buttons to control the zooming PEC IN 2012 061d 2s Select a channel to zoom in out EIZ00m out the current enlarged image step by step eimaEnlarge the current image step by step Zoom Box Use the yellow box to move to or select a desired zooming area L Fxit the zooming screen and return to the live screen Monitoring To check the event log You can
29. the signal line to make connection between D of the rear NVR and D of the keyboard controller 2 Make connection between D of the rear NVR and D of the keyboard controller 3 Connect GND on the rear of the NVR to GND of the keyboard controller v For RS 485 connection refer to the user manual of the keyboard controller v Signal connection for POS and ATM is scheduled to be upgraded later RS 232 Connection You can connect a text in device such as POS or ATM For connection of the text in device refer to the user manual of the text in device v Signal connection for POS and ATM is scheduled to be upgraded later Audio Device Connection You can connect an audio output device such as speaker amplifier Connect the audio input device such as microphone to the rear Audio In port connect the audio output device such as speaker amplifier to the Audio Out port INSTALLATION eSATA Storage If the internal storage space is insufficient you can extend your storage capacity by adding an eSATA storage device to the rear eSATA port v Recording may not be enabled with an incompliant eSATA storage For the compatibility list contact the retailer of the eSATA storage USB Device You can connect a USB storage device for saving the video updating the firmware importing exporting user data or settings You can also connect the USB mouse to control all operations of the NVR i e s MS External HDD USB Storage Mouse
30. upgrade process 7 When the upgrade is complete reboot the system X SYSTEM Pla Pe eS ee System Setting System Information You can check the current system version and system related settings 1 From lt SYSTEM SETUP gt lt SYSTEM gt select ESEZ lt SYSTEM INFORMATION gt ae 2 Check the status of the current system ae 3 When done press the EXIT button on the remote is os control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu tw VITEN AAT PAi CAT Diii IA I i a i Sma aa O a o i SSE aa a ey a _ s a rna DEDOQUUU Control Device Configure the settings of the remote control and SYSTEM keyboard controller ijas 1 From lt SYSTEM SETUP gt lt SYSTEMS select lt CONTROL DEVICE gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to set the connection options for the control device gt SYSTEM ID Set the ID of the NVR so that the keyboard controller can identity gt PROTOCOL Set up the protocol of the keyboard controller gt BAUD RATE Specify the RS485 communication speed gt REMOTE CONTROLLER ID Set the ID of the remote control To apply the change click lt APPLY gt in the bottom of the screen When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to t
31. v Click lt VERIFY INTEGRITY gt to check if the data is corrupt or incomplete ARCHIVING 4 Select an item to play from the lost and click lt PLAY gt 5 To exit the Archive menu click lt CLOSE gt 6 6 Archiving Archive Devices Setup Provide the FTP server information for archiving data in the HDD before testing the transfer 1 From the lt ARCHIVE gt menu select lt ARCHIVE DEVICES SETUP gt 2 Move to the FIP information box 3 Fill in each item using a virtual keyboard v HOST NAME enter the address at which you can access the server v PORT enter the port number to which you can access the server v USER NAME enter the user ID with which you can access the server v PASSWORD enter the connection password v DIRECTORY specify the archiving path 4 When all information is filled click lt CONNECTION TEST gt to check the connection status To apply the change click lt APPLY gt in the bottom of the screen 6 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu g ARCHIVING Ol Web Viewer What is the Web Viewer Web RA is a user friendly software application that enables you to control the video data in connection with a remote NVR System Requirements The following is the minimum hardware and operating system requirements to run Web RA Operating
32. write mode to lt ONCES this event occurs when the disk is full 100 gt DISK SPACE EXHAUSTED EVENT Event that is triggered if the disk is almost full Click to specify the threshold percentage of usage to trigger the event gt S M A R T EVENT Occurs if the disk causes the S M A R T error gt NO DISK EVENT Occurs if no disk is recognized after the booting due to a disk failure or cable problem E To detect the disk error it is recommended not to change the settings of the S M A R T event no disk event and buzzer output Record gt PANIC RECORD START EVENT Specify the action to perform when the panic recording begins 50 System Setting System gt BOOTING EVENT This event occurs when the NVR is booting gt LOGIN FAIL EVENT This event occurs when the NVR fails to log in You can specify the times of clicking lt B gt to trigger the event gt FAN ERROR EVENT This event occurs if the CPU cooling fan or unit s cooling fan does not work at all If the fan fails no recording will proceed by the NVR If you encounter a fan failure contact the retailer or the service enter for technical assistance gt TEMPERATURE FAIL EVENT This event occurs if the internal temperature of the NVR exceeds the effective range Then the NVR will not operate normally If this is the case check the followings and take a necessary measure Check if the ventilation of the NVR is clogged with foreign substances If s
33. 10 100Mb Ethernet cable without a separate power source S N Precautions To secure recording stability from an overloaded network traffic hacking attempt or DoS Denial of Service attack only the direct cable connection between camera and NVR is allowed v Ifthe IP camera provides the alarm I O port or Audio I O port you can make alarm or audio connection For more details refer to the user manual of the IP camera lt The Ethernet connection is effective within 100 meter in distance Beyond that you may encounter a data loss or failure to connect to the camera If you need to make cable connection of longer than 100 meters use a separate PoE extender for cable extension lt The total power consumption of the IP cameras should not exceed the rated power capacity of the 48V PoE adaptor Beyond that the video may not be played properly or no video will be displayed at all If this is the case use a separate additional power source for supplying power to the cameras Camera HUB or Router NVR lt For stable operation a dedicated communication line is established for IP cameras in the same network This is why network router or hub connection is not allowed 1 2 INSTALLATION Alarm I O Connection connect the alarm input signal 1 While pressing and holding the A1 or A2 port button in the rear bottom of the NVR insert the alarm signal cable in the hole under the button 2 Insert the grounding wire in t
34. 2002 96 EC 2 Todos os produtos el ctricos e electr nicos devem ser eliminados separadamente da coleta d lixo municipal atrav s de pontos de recolha designados facilitados pelo governo ou autoridades locais A eliminagao correcta do seu aparelho antigo ajuda a evitar potenciais consequ ncias negativas para o ambiente e para a saude humana Para obter informa s mais detalhadas acerca da elimina o do seu aparelho antigo contacte as autoridades locais um servi o de elimina o de residuos ou a loja onde comprou o produto Espa ol Spanish C mo deshacerse de aparatos electricos y electr nicos viejos il punto vendita nel quale avete acquistato il prodotto Polski Polish Utylizacja starych urz dze 1 Si en un producto aparece el simbolo de un contenedor de basura tachado significa que este se acoge a la Directiva 2002 96 EC 1 Kiedy do produktu dotaczony jest niniejszy 2 Todos los aparatos electricos o electr nicos se przekresiony symbol kotowego pojemnika na mieci oznacza to e produkt jest objety europejska dyrektywa 2002 96 EC Wszystkie elektryczne elektroniczne produkty powinny by utylizowane niezale nie od odpad w miejskich z wykorzystaniem przeznaczonych do tego miejsc sk adowania wskazanych przez rz d lub miejscowe w adze Wiasciwy spos b utylizacji starego urz dzenia pomo e zapobiec potencjalnie negatywnemu wp ywowi na zdrowie i srodowisko Aby uzyska
35. 3 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen to return to the previous menu 43 System Setting Disk Operations You can set to delete the recording automatically and set the overwrite options and you can also format the HDD recording data 1 From lt SYSTEM SETUP gt lt STORAGES gt select lt DISK OPERATIONS gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to set the operation conditions of the disk gt DISK WRITE MODE If itis set to lt OVERWRITES the existing data will be overwritten by new recording data if the recording data size exceeds the free space of the HDD If the option is set to lt ONCE gt and the HDD is full the NVR will stop recording and output the beep or alarm that is pre defined at lt EVENT gt gt RECORDING TIME LIMIT The recording data will be deleted after a specific time of reservation If it is set to lt OF F gt this function will be disabled gt DISK FORMAT format the hard disk E Note that formatting the HDD will delete all video data and logs 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu S M A R T settings You can check the S M A R T information of the disk and specif
36. CERTIFICATION eo 1o03 Full HD Display HD1080p 60Hz Yes From IP Camera 8 CH IP 1 CH Internal 8 CH IP 1 CH Internal G 711 H 264 BP MP HP MAX 30 FPS 1080p CH MAX HD 1080p 8 CH IP 2 CH Internal 8 CH IP 1 RELAY Internal 2 YES eSATA 2 ports 8 IPCamera PoE 1 LAN 1 WAN YES YES 20W max without HDD 10 90 NC 0 40degC 32 104degF 305 x 298 x 44 FCC CE 4 CH Remarks 4 x IP Camera Max HD1080p 4 CH Full HD Display HD1080p 60Hz Yes From IP Camera Depend on IP Camera 4 CH IP 1 CH Internal 4 CH IP 1 CH Internal G 711 Depend on IP Camera Depend on IP Camera H 264 BP MP HP MAX 30 FPS 1080p CH MAX HD 1080p Depend on IP Camera Depend on IP Camera 4 CH IP 2 CH Internal 4 CH IP 1 RELAY Internal Depend on IP Camera Depend on IP Camera 2 YES eSATA 2 ports 4 IPCamera PoE 1 LAN 1 WAN YES YES 2 20W max without HDD 10 90 NC O 40degC 32 104degF 305 x 298 x 44 FCC CE English Disposal of your old appliance 1 When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC 2 All electrical and electronic products should be disposed of separately from the municipal Waste stream via designated collection facilities appointed by the government or the local authorities 3 The
37. D AM A v For more information about the alarm ca n03 output and ON OFF schedule refer to CAM AOS Alarm Out page 45 aie CAM a0 CAM Ai08 AOL ALARM OUTPUT ALARM OUT ALARM OUTPUT E oorr Bo even 10 19 92 13 14 15 16 17 18 19 20 21 22 23 EVENT NOTIFICATION Event Notification B EE Specify the notification method using one of n lt BUZZER OUT gt lt DISPLAY gt lt E MAlL gt against an event alarm that occurs Specify the buzzer output time display time and email notification and click lt OK gt to apply the EVENT NOTIFICATION changes n v For more information about the event 5 see notification refer to Event Notification OSD POPUP page 46 EVENT MO TIFIGA MON EMAIL NOTIFICATION 8 2 Web Viewer Alarm Sensor You can configure the settings of the alarm sensor ALARM SENSOR And specify the operation of the sensor if an event Occurs ua PEE wo a TIKAR When done click lt OK gt to apply the changes CAMAS CAA z A D o a v For more information about each of the alarm 5i S m o gt z a aa sensor actions refer to Alarm Sensor mens pE eo m a aA page 48 ee re ae a Noe pact ete Motion Sensor alone You can set an action to execute when a motion is detected cH 5sec 3 D a D When done click lt OK gt to apply the changes oe r K v For more information about how to set the a D a motion sensor refer to Motion Sensor t a 5 gt page 50 cH 5 sec a f o VI
38. DEO LOSS Video Loss You can select an action for lt BU ZZER gt and a 5 lt EMAIL gt and determine what to do on the alarm aoe k z output port if no video is received from the camera w E When done click lt OK gt to apply the changes Pu 8 3 Web Viewer System Event You can set which action to perform if an event related to the disk recording network or system happens You may want to notify the user of the event usingthe alarm output buzzer OSD popup and email SYSTEM EVENT STATUS SYSTEM EVENT STATUS When done click lt OK gt to apply the changes v For more information about how to set the system event refer to System Event page 51 SYSTEM EVENT STATUS SYSTEM EVENT STATUS Web Viewer R e C O rd S e t u p RECORDING CONFIGURA TOH MODE _ Record Setting MANUAL CONFIGURATION OPTIONS You can set the recording options for Auto or Manual aut mode 30 Sac PANIG RECORDING OPTIONS Ok CANCEL When done click lt OK gt to apply the changes nei edie re mm n v For more information about how to set each nT ere mode refer to Operation Mode page 54 O ALWAYS HIGH VIDEO QUALITY MOTION RECORD D ALARM RECORD D MOTIONALIAM RECORD D INTENSIVE MOTION RECORD INTENSIVE ALARM RECORD D INTENSIVE MOTIONALARM RECORD PANIC RECORDING OPTIONS CONTINUOUS REC Continuous Recording SZEMPSIOUALTY SCHEDULE You can configure the settings of sn E continuous recording time recording si
39. E5 EEEEEEEE EJ The video size FPS quality and audio recording options may differ depending on the specification of the IP camera For some IP cameras the video transfer may be interrupted if some of the options are changed 54 Record Setting Schedule Setting 1 Select a start day of the week on the schedule 2 Click a time cell from which you want to make the schedule and drag it to a desired cell Or use the A V lt gt buttons on the remote control to move to the cell and press ENTER Then use the A V lt gt buttons to move to a desired cell and press ENTER again 3 When the time selection is complete you will be prompted to specify the use of recording in the Record Setup window 4 To apply the change click lt APPLY gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu RECORDING Motion Recording Specify the recording size of the motion event if it occurs and make schedule for that recording 1 From the lt RECORD SETUP gt menu select RECORDING lt MOTION RECORD SE 2 Use the A V lt gt buttons on the remote control or use the mouse to select either lt SIZE FPS QUALITY gt or lt GSCHEDULE gt 3 Set each item of lt RESOLUTION gt lt FPS gt lt QUALITY gt and use of the lt AU DIO gt for the motion recording F
40. ERVIEW What s included Mouse Remote Control x1 Power Cable x2 amp Batteries AAA x2 DC 12V Adaptor DC 48V Adaptor Screws Adapter cable retainer clip x2 User manual CD Quick Guide OVERVIEW Front Panel Name i a IR Remote Control Receiver Used for connecting USB storage or mouse POWER REC HETHORE ALARA a OVERVIEW Rear Panel 14CH 18CH NO Name WAN UPLINK 3 ALARM OUT Network port for connection to the Internet router or hub Alarm output device connection port ROM Power Switch T NVR power switch Plug the power cord and turn this switch on RS 232C Signal connection port for POS and ATM Scheduled to be upgraded AUDIO OUT Port for speaker connection 11 12 HD MONITOR Port for connecting a full HD 1920x1080 supported monitor Use the HDMI cable to connect with a 1080p 60Hz monitor 13 14 DC 48V Power input port for the camera PoE compliant Connect to a 48V adapior OVERVIEW Remote Control At a Glance POWER Turn on or off the power SEARCH Display the search window ARCHIVE Display the backup window Channel Function as channel selection button in live or playback mode Or used for entering the password DISPLAY Switch the split mode SEQ Switch to sequence mode SNAPSHOT Turn on or off the power lt i 4 gt I gt Used to change the direction or adj
41. GanzView specification Minimum recommended pecification Android Phone iPhone iPhone 3G iPhone 3GS or higher iPod touch 3rd Generation iPhone OS 3 2 or higher iPhone OS 3 1 3 or higher Mobile Viewer Using the GanzViewer on iPhone How to download the iPhone dedicated application From your iPhone access the App Store Enter GanzView in the search bar to find it before downloading Install the application on your iPhone The GanzView supports the 1 4 split screen mode v With the GanzView Lite you cannot check the log control the PTZ operations or change the system seitings DVR List 11 102 To connect to DVR with GanzView 1 Select and run the GanzView 2 Click lt gt in the top right corner of the DVR List to select and add a site to the list DVR List 1 1 102 Save Server Name 3 Enter the server name and click lt Save gt 4 Provide the IP address HIT TP port number and RTSP port number and click lt Save gt IP and Ports 8 9 Mobile Viewer 5 Provide the access ID of the DVR as well as the password 6 Specify the use of the Auto Login 7 Click lt Save gt ID and Password Auto Login a R Cancel Save DVR List 1 1 102 8 Select the site that you added in the DVR List 00115f00a304 dvrlink net 9 Try to access the DVR If connected successfully you will see the screen as shown 9 0 Mobile Viewer Split Mode 1 Click any area on th
42. HD1080p 4ch 8ch Network Video Recorder PIXEL SM NVR MASTER NR4HL NR8HL USER S MANUAL for necting operating or adjusting this product ead this i asolo booket castilha nd completely AAA CONTENT OVERVIEW 3 Before Installation 4 Key Features 6 Front Panel 7 Rear Panel 8 Remote Control At a Glance INSTALLATION 10 Basic Layout 11 Connecting to an external devices MONITORING 18 Start up Shutdown 20 Live Screen At a Glan SYSTEM SETTING 26 To move to the System Setup menu 27 Camera Setting 30 Display Setting 33 Audio Setup 34 User Setting 36 Network Setup 39 System Setting 43 Storage 45 Event Setup RECORD SETTING 52 To start the Record Setup menu 52 Record Setup SEARCH 58 To move to the Search menu while in monitoring 58 To move to the Search menu while in playback mode 59 Search Settings PLAY 62 If you want to play ARCHIVING 65 To start the Archive menu WEB VIEWER 68 What is the Web Viewer 70 Live 74 Search 76 Setup MOBILE VIEWER 88 GanzView ARCHIVE VIEWER 99 Getting started with the Backup Play 100 Backup Player At a Glance APPENDIX 103 Specification OVERVIEW Before installation Comply with the following instructions to prevent a fire explosion system failure shock or electric lt Remove the power supply module before proceeding lt Check the input voltage AC100V AC240V to the power supply module before connect
43. ME gt and press Test to check if it works properly gt NVR ADDRESS Provide the lt NVR NAME gt and press the lt DDNS REGISTRATION TEST gt button The name will be added automatically gt DDNS CONNECTION TEST Perform the connection test to check if DDNS is normally registered To apply the change click lt APPLY gt in the bottom of the screen When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Email You can register and test an email address so that an email notification is delivered at a specific interval or if an event occurs i 2 Use the A V lt gt ENTER buttons on the remote From lt SYSTEM SETUP gt lt NETWORK gt select lt EMAIL gt control or use the mouse to specify the use of email and select a server gt SERVER Set up the mail server Set the mail Server that will be used for notification to the NVR Use the virtual keyboard to enter your mail server gt PORT Enter the mail server port gt SECURITY If it is set to lt On gt the email will be transferred in secure mode If itis set to lt Off gt the email will be transferred to a server that does not support SSL gt USER Provide the email account ID of the sender gt PASSWORD Provide the password of the sender gt TEST EMAIL ADDRESS Enter an email address for the test purpose gt TEST Send a te
44. ROLLER ID gt and press lt Apply gt Select between 00 and 99 For more details refer to lt GSYSTEM SETUP gt The remote control will be active only if the remote control ID matches with that of the NVR s system ID 2 Press the ID button on the remote control The default remote control ID is 00 3 Use the number buttons to provide a two digit ID If you want to enter 01 for instance enter the number 0 and 1 in sequence Check if the remote control ID is set properly by manipulating the remote control 4 To reset the ID to 00 press and hold the ID button INSTALLATION Basic Layout ss T p f i can i T es ad A ie se lt if k oot i F A x REN i Camera gia Full D monitor a a j ET AR Network CMS p Attached Web viewer Eae 7 Storage Mobile viewer E Control Device Access Controller Precautions To secure recording stability from an overloaded network traffic hacking attempt or DoS Denial of Service attack only the direct cable connection between camera and NVR is allowed Any access from an outside PC to the IP camera will be strictly prohibited for the purpose of secure operation v Signal connection for POS and ATM is scheduled to be upgraded later S Solb INSTALLATION Connecting to an external device Connecting to the monitor This product supports only monitor models featuring 1080p 60Hz HDMI or DVI input
45. Record Setup menu To start the Record Setup menu How to use the mouse Q SEARCH ARCHIVING X iN amp SYSTEM SETUP i AN oo RECORD SETUP a gt LOGOUT SHUTDOWN MENG hs How to use the remote control 1 Q SEARCH ARCHIVING VS SYSTEM SETUP RECORD SETUP LOGOUT SHUTDOWN Record Setup Operation Mode You can set the recording options for Auto or Manual mode 1 From lt RECORD SETUP gt menu select lt OPERATION MODE gt 2 Use the A V lt gt buttons or use the mouse to set lt RECORD SETUP MODE gt to lt AUTO CONFIGURATION gt or lt MANUAL CONFIGURATION gt 3 Set the recording options for each selected Record mode 4 To apply the change click lt APPLY gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu a2 Record Setting Auto Configuration If you choose your preferred record mode the NVR will recommend you the optimized settings for the selected record mode gt ALWAYS HIGH VIDEO QUALITY Recording will proceed in the best quality regardless of the event at all times RECORDING As this option will always make recording in the ae best quality the recording period is the shortest compared to the other record modes gt MOTION RECORD Recording will proceed only if a motion is detected gt ALARM RECORD
46. VR Only authorized users can access the Record Setup menu To move to the Search menu while in monitoring How to use the mouse Q SEARCH P ARCHIVING A SYSTEM SETUP gt gt RECORD SETUP gt MENT 7 A LOGOUT SHUTDOWN How to use the remote control 1 D m amp 2 eee a gt i a 7 gt X SYSTEM SETUP jaw ian y _ C RECORD SETUP ei Poca E gt SHUTDOWN How to use the remote control 2 SEARCH To move to the Search menu while in playback mode How to use the mouse Q SEARCH gt ci gt ARCHIVING As LIVE How to use the remote control I SEARCH Search Time Search With the calendar you can search for the recording data by the recorded date 1 From the lt SEARCH gt menu select lt TIME SEARCH gt 2 Use the A V lt gt buttons or use the mouse to specify the search date and time from the calendar in the lef corner of the screen gt FIRST The first date of recording is automatically selected gt LAST The last date of recording is automatically selected gt amp Press this to display the time selection menu where you can specify the time and date 3 You can identify the type of the recording data by the color in the bar gt Pink Pre recording The pre recording is performed on the recording data after you set the lt PRE RECORDING TIME gt from lt OPERATION MODE gt gt Green Continuous The continuous recordin
47. aT Stee Sc Complete setting the lt SIZE FPS QUALITY AUDIO gt for the alarm recording as well as the lt SCHEDULE gt and click lt OK gt to apply the changes ee r is v For more information about the alarm recording size and schedule refer to ot Alarm Recording page 57 cae 8 6 Web Viewer Panic Recording oe From the lt PANIC RECORD gt menu you can set the 5 resolution FPS quality and audio settings to your E eae ao ileal cue wane er Click lt gt next to each item to display the list of caer me E E aa values available a e a w When you have completed the manual record settings click lt OK gt to apply the changes v For more information about the manual record settings refer to Panic Recording page 97 NE MORK 5 TREAMIMG Network Streaming cue T You can specify the maximum size of network aan aren 7 3 streaming and video resolution for remote users and Se mice ae change the FPS cAMT 6401382 IE x Click lt gt next to each item to display the list of values available When done click lt OK gt to apply the settings Web Viewer Information About Click the ANFORMATION gt tab to check the model DVR Model 08CH 240FPS name of the NVR as well as the web viewer version WEB Version WEB v1 77 12 48 110919 i Mobile Viewer GanzView You can use the smart viewer to monitor the network on a remote site and play the monitoring video anytime anywhere
48. account click lt DELETE gt The lt ADMIN gt account can not be changed or edited Group Authority You can grant different user groups different permissions to a specific menu 1 From lt SYSTEM SETUP gt lt USER gt select lt GROUP AUTHORITY gt 2 Use the A lt gt ENTER buttons or use the mouse to set the permissions for both lt MANAGER gt and lt USER gt groups gt SEARCH Set the permissions for the Search menu gt ARCHIVING Set the permissions for the Backup menu gt SYSTEM SETUP Set the permissions for the System Setup menu gt RECORD SETUP Set the Access Permissions for the Record Setup menu gt EVENT ACTION CONTROL Set the permissions to output the alarm or control the buzzer if an event such as alarm occurs gt LISTEN TO AUDIO Set the permission to listen to the audio gt MICROPHONE Set the permission to speak through the microphone gt REMOTE LOG IN Set the permission to access remotely gt SHUTDOWN Set the permission to shut down NVR from the System menu To apply the change click lt APPLY gt in the bottom of the screen When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 35 System Setting Network Setup You can configure the settings regarding user management and user and group permissions IP Setup Specify the IP address
49. ame remote network and control or manipulate it on the monitor of the PC or mobile device gt Ciir Broadband Router Direct Connection CT internet gt TE a Local PC URE Cinternet gt ADSL Modem i 1 Local PC IES Remote PC Smart Phone 1 Connect the WAN UPLINK port in the rear panel to the router Broadband Router ADSL Modem Local PC 2 Connect the WAN UPLINK port of the router directly to the fixed IP LAN cable or connect it to the ADSL modem 3 If using the router set the port forwarding and enter the DDNS address in the address bar web browser of the remote PC or of the dedicated software program or mobile phone For the IP and DDNS address settings refer to Network Setup page 37 4 Ifthe MAC address of the NVR is 00 1C B8 12 34 56 and the web port number is 8080 enter http 001CB8123456 dvrlink net 8080 in the address bar of the web browser lf you have renamed DDNS as mydvr you can make network connection athttp mydvr dvrlink net 8080 Monitoring Start Up Shutdown START You can connect NVR to a PC in the same network and control or manipulate it on the PC monitor 1 Connect the adaptor to the 48V PoE power input port in the rear panel of NVR v Make connection when the power is not applied yet 2 Connect the adaptor to the 12V power input port in the rear panel of NVR 3 Turn on the power switch in th
50. anually For more information contact your network administrator gt DELETE PORT release the port forwarding settings for the router gt MAX TX SPEED Limit the network transfer rate to access a remote client The video signal may be transferred at a less rate than specified which depends on the status of your network connection 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 3 6 System Setting DDNS You can configure the DDNS settings so that remote users who are connected to the network can access remotely DDNS is an IP redirection service in a dynamic IP environment that redirects maps the new IP address to a registered domain name each time the IP address is changed 1 Use the A lt gt ENTER buttons on the remote From lt SYSTEM SETUP gt lt Network3 gt select iim lt DDNS gt control or use the mouse to specify the use of DDNS and select a server gt DDNS Specify the use of DDNS connection gt DDNS SERVER Select a server to connect to gt NVR NAME Enter the name of the NVR that you want to use as DDNS gt DDNS REGISTRATION TEST Check if the lt NVR NAME gt can be set as DDNS If there is a duplicate name in the server the registration will fail If this is the case rename the lt NVR NA
51. c user Set to hide the camera video so that a specific user or user group can not view To change the covert settings from user group to user move to the lt USER gt menu and make necessary changes When done click lt OK gt to apply the changes COVERT SETUP Web Viewer Motion Setting Specify the use of motion detection and reaction For each channel and set also the daytime nighttime options Select a channel Set the mask area and activation and specify the daytime range When done click lt OK gt to apply the changes MOTION SENSOR v For information about how to set the motion area refer to Motion Area Setup page 29 Display OSD Setting Configure the settings for the time title boundary icon and language that will be displayed on the screen Make changes to each item of the OSD menu and click lt OK gt to apply the changes a a Monitor Settings You can set the interval of an active sequence Specify the interval and click lt OK gt to apply it MONITOR Web Viewer Audio Audio Buzzer You can configure the settings of the voice and audio signal v For details about each displayed item BUZZER refer to Audio Setup page 33 AUDIO User User Management You can add a user account and change the password v For details about each displayed item v refer to User Setting page 34 To add a user click lt Add gt and provide the user informatio
52. check the log of the events that occurred 1 Click Log to display the EVENT LOG window The log list is sorted with the latest one on top 2 Double click a desired log to display the event video You will move to the play screen of the selected log To select an audio input channel Select a channel from which the audio signal will be received If you check the lt LINK TO FULL SCREEN gt option and change the 1 split screen the audio signal will be sync with the selected channel v Even if a channel to syn with is already selected checking the lt LINK TO FULL SCREEN gt option will receive the audio signal only from the selected 1 split screen regardless of the previous setting To select an audio output channel You can select a camera outputting the voice signal from the microphone that is connected to NVR Monitoring To check the alarm status You can check the alarm status of each camera Click lt OK gt to close the window To check the network status You can check the network connection status Click lt OK gt to close the window v For more information refer to Network Status page 38 Be ay Ton QB MG a Im 01 01 2012 To check the disk status You can check the storage space of the current disk and check also if there is any problem with the disk Click lt OK gt to close the window For more information refer to Disk Information page 43 System S
53. comes gt DAYTIME SET specify the time period that will be considered as daytime gt DAYTIME specify the lt SENSITIVITY gt and lt MINIMUM BLOCKSs for the daytime gt NIGHTTIME specify the lt SENSITIVITY gt and lt MINIMUM BLOCKSs for the nighttime Images recorded in a low contrast scene such as at night cause severe noise triggering the motion event too often If this is the case reduce the nighttime sensitivity to a degree OD 2 9 System Setting Display Setting You can configure the display settings regarding the OSD menus monitor and sequence OSD Configure the settings for the time title boundary icon and language that will be displayed on the screen 1 From lt SYSTEM SETUP gt lt DISPLAY gt select lt OSD gt rae 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to set each option of the OSD item gt CAMERA TITLE specify the display of the camera title on the screen gt RECORDING MODE ICON specify the display of the record mode icon on the screen gt AUDIO ICON specify the display of the audio icon on the screen gt STATUS BAR ON FULL SCREEN MODE select to show or hide the status bar in full screen mode AUTO HIDE place the cursor in the lower area of the screen to display the status bar If moving the cursor up the status bar will disappear ALWAYS ON The status bar will be displayed at all times 5 SEC 1 MIN
54. confirmed and will be added to the Add Sequence list in order 8 When done click lt CLOSE gt in the bottom of the screen After the sequence type is saved you will return to the previous screen 9 Right click on the new sequence or press the ENTER button on the remote control to edit or delete it DISPLAY To edit a sequence 1 Select a sequence that you want to edit in the list 2 The EDIT dialog appears 3 Use the A lt gt ENTER buttons on the remote control or use the mouse to edit the selected sequence gt SEQUENCE TITLE enter a new sequence name gt ACTIVATION specify the use of the sequence gt MODIFY change the settings of the sequence mode gt DELETE delete the selected sequence list gt CANCEL cancel the changes 4 Pressing the lt EDIT gt button will display the Edit Sequence window To change the existing settings select a screen mode that you want to edit and right click to display the context menu Then select lt EDIT gt When done click lt CLOSE gt to close the window To apply your changes click lt APPLY gt Ol ND 3 2 System Settin Audio Setup You can configure the settings of the voice and audio signal AUDIO Choose whether to receive the live sound source and select an audio channel 1 From lt SYSTEM SETUP gt lt AUDIOS select lt AUDIO gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select an
55. correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health 4 For more detailed information about disposal of your old appliance please contact your city office waste disposal service or the shop where you purchased the product Fran ais French Elimination de votre ancien appareil 1 Ce symbole representant une poubelle sur roulettes barr e d une croix signifie que le produit est couvert par la directive europ enne 2002 96 EC 2 Tous les produits lectriques et electroniques doivent tre limin s s par ment de la chaine de collecte municipale des ordures par I interm diaire des installations de collecte prescrites et d sign es par le gouvernement ou les autorit s locales Une limination conforme aux instructions aidera r duire les consequences negatives at risques ventuels pour l environnement et la sant humaine Pour plus d informations concernant lelimination de votre ancien appareil veuillez contacter votre mairie le service des ordures menageres ou encore le magasin ou vous avez achete ce produit Deutsch German Entsorgung von Altgeraten 1 Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist unterliegt dieses Produkt der europ ischen Richtlinie 2002 96 EC Alle Elektro und Elektronik Altgerate mussen getrennt vom Hausm ll ber die daf r staatlich vorgesehenen St
56. displayed until a mouse or remote control button is pressed 5 300 SEC Keep the OSD popup displayed for as long as specified 4 7 System Setting Email If an event occurs this will notify registered users of the event by email If you do not want to receive the email uncheck the lt EMAIL NOTIFY gt option in lt MANAGEMENT gt Page 34 gt ADD NEW EMAIL If you want to add a new mail recipient beside the existing ones click this to add the recipient gt MINIMUM EMAIL FREQUENCY Adjust the minimum frequency of sending the email i For example even if you have set the minimum frequency to one minute and another event occurs in less than one minute after the last email sending the email for the new event will be sent one minute after Some email servers can block the email sending if the email delivery cycle is too short and classify it as spam Contact your email service provider to adjust the minimum delivery cycle so that the server does not classify the email as spam Alarm Sensor You can configure the settings of the alarm sensor and specify the operation of the sensor if an event occurs 1 From lt SYSTEM SETUP gt lt EVENT gt select lt ALARM SENSOR gt 2 Use the A lt gt buttons on the remote control or use the mouse to specify the sensor input method and operation gt NAME You can specify the name of the alarm sensor gt OPERATION You can specify the type of the alarm sensor
57. e rear panel of NVR With a beep the logo screen appears several seconds after the front LED turns on 4 When the booting process is completed the live screen then the login screen appears Log In To manipulate or access the menus of NVR you should have logged in 1 When the system starts the login screen appears 2 Select a user and provide the password The default password of the ADMIN account is Ee ADMIN o 4 234 PASSWORD 3 Click lt 0K gt Epopgoponpnnn If the login information is correct and valid you will FN see the live screen ae v For the security purpose change the password right Fe Fen ED EW WC a after you purchased the product Fe ES sce anitik en dees CANCEL Log Out To prevent unauthorized access it is recommended to log out when you leave the screen v Hover the cursor near the bottom of the screen to ia me menu 1 Inthe monitoring screen click lt M ENU gt in the bottom left corner of the screen to lt LOG OUT gt or press the LOGOUT button on the remote control 2 2Access to Search Backup System Setup Record Setup System Shutdown will be restricted Monitoring System Shutdown You can connect NVR to a PC or mobile device in the same remote network and control or manipulate it on the monitor of the PC or mobile device SHUTDOWN 1 w N In the monitoring screen click lt Menu gt in the USER ID ADMIN oo bottom left corner of the screen to l
58. e screen The main menu appears at the bottom of the screen 2 Click lt L gt in the top left corner to switch to 1 split mode click lt q gt to switch to 4 split mode v Use the mouse to scroll the screen to the left or right to move to the next camera video screen 9 1 Mobile Viewer Using the Log View Back Log 1 From the main menu click lt fa gt Date Time Filter Option You can check the log of the data stored Start Motion a No CH Date Time Log Back Log 2 Select one from Alarm Motion Record Etc and f click lt ics gt Date Time Filter Option You will view the log of related items Start Alarm Motion End Record Etc No CH Date Time Log lg LE Mobile Viewer Back Time Line p Using the Search function 1 From the main menu click lt K gt Date Time You can view the history of the data stored a eee eet T anas 1 2 3 a 5 6 T 8 2 Select a desired time and date You can use the vertical time bar to specify the start time 3 Click lt gt to play the video recorded at the specified time a 4 0110120120 oh ma e View p i Time Line De le 4 Click any area to display the play bar with which you can control the playing direction and speed of the video 9 3 Mobile Viewer Using the Setup function Hill AN A peer You will be connected to the web viewer site v For details about each displayed item CAMERA
59. ect lt MANAGEMENT gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to add a user account or select an item that you want to edit 3 To apply the change click lt APPLY gt in the bottom ofthe screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu To add a user account 1 Click lt ADD gt in the bottom of the screen 2 Use the A V lt gt buttons on the remote control and move to a desired item Then press ENTER to select the item gt USER ID enter the user ID using the virtual keyboard gt PASSWORD With the virtual keyboard enter the password gt GROUP From lt ADMIN gt lt MANAGER gt and lt USER gt select a group that the user belongs to gt EMAIL Type in the e mail address to which you will receive notification of an event if it occurs gt EMAIL NOTIFY Choose whether you will receive notification of an event if it occurs gt COVERT CHANNEL You can set the channel to hide from a specific user 3 When done click lt OK gt The added user account will be listed 34 System Setting To edit the user account information 1 From the list of users select a user account to edit and click lt E DIT gt next to it 2 From the Edit window make necessary changes and click lt OK gt 3 To delete the user
60. elect desired menu og Search Thumbnail Search To improve your search you will be provided with a list of thumbnails Select Day Hour or Minute to narrow down the search results 1 From the lt SEARCH gt menu select lt THUMBNAIL SERARCH gt 2 Use the A V lt gt buttons or use the mouse to specify the search date and time from the calendar in the left corner of the thumbnail search screen gt FIRST The first date of recording is automatically selected gt LAST The last date of recording is automatically selected gt CHANNEL Select a channel to search for gt DATE TIME Specify the search date and time v The menus available differ depending on the selected interval mode gt INTERVAL Select a time interval of the thumbnail view 3 Double click a desired play time in the recording data bar or double click a desired time image from the thumbnail list You will move to the playback screen 4 If you want to stop playing and return to the search screen press EXIT or SEARCH on the remote control You can also click lt MENU gt in the lower left corner and select a desired menu lt Day selection screen gt 60 l Search Event Search Search for events that occurred at the specified time and select an event to play from the list 1 From the lt SEARCH gt menu select lt EVENT SEARCH gt 2 Use the A V lt gt buttons or use the mouse to specify the lt S TART g
61. ellen entsorgt werden n Mit der ordnungsgemaBen Entsorgung des alten Ger ts vermeiden Sie Umweltschaden und eine Gef hrdung der pers nlichen Gesundheit Weitere Informationen zur Entsorgung des alten Gerats erhalten Sie bei der Stadtverwaltung beim Entsorgungsamt oder in dem Gesch ft wo Sie das Produkt erworben haben 10 4 Italiano Italian RAEE SMALTIMENTO DELLE VOSTRE VECCHIE APPARECCHIATURE 1 Quande il simbolo del Cassone ette Barrato Portugu s Portuguese Eliminacao do seu antigo aparelho 1 Quando este simbolo de latao cruzado estiver afixado a um produto significa que o produto apposto su un prodotto significa che lo stesso pu ricadere nei termini previsti dalla Direttiva Europea nr 2002 96 EC in funzione dell attuazione definita dalla Legislazione del singoli stati membri dell Unione Europea 2 Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente dai rifiuti municipali tramite appositi contenitori approvati dal Amministrazione Comunale o dalle Autorita Locali Il corretto smaltimento delle vostre vecchie apparecchiature contribuir a prevenire possibili conseguenze di impatto negative sull ambiente e per la salute dell uomo Per maggiori informazioni circa lo smaltimento delle vostre vecchie apparecchiature siete pregati di contattare l ufficio municipale della vostra citta il servizio di smaltimento rifiuti o abrangido pela Directiva Europeia
62. etting To move to the System Setup menu How to use the mouse 5 a gt aH MEN Ae Se How to use the remote control 1 V p w F A fe _ on gt Qi gt How to use the remote control 2 SETUP S SEARCH ARCHIVING gt T i LOG OUT SHUTEEWN a SEARCH ARCHIVING ay RECORD SETUP gt a LOG OUT is w SHUTDOWN SYSTEM SETUP RECORD SETUP gt 26 System Setting Camera Setting You can configure the camera settings on the NVR screen regarding the camera ID image hide show and motion CAMERA ID You can change the camera ID that is displayed on w DUAE the screen 1 From lt SYSTEM SETUP gt lt CAMERAS select lt CAMERA TITLE gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select a channel that you want to rename Alternatively simply double click the camera to rename from the top left corner 3 With the virtual keyboard that appears enter a camera title and click lt OK gt 4 To apply the change click lt A PP LY gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Image Setup Adjust the brightness contrast color and quality for each channel to your preference 1 From lt SYSTEM SETUP gt lt CAMERAS select MAGE SETUP gt 2 Use t
63. g is performed on the recording data gt Red Alarm The alarm event recording is performed on the recording data gt Blue Motion The motion event recording is performed on the recording data gt Yellow Panic The panic manual recording is performed on the recording data 4 Click to move to a desired start time in the time bar or use the buttons at the bottom of the status bar to make search gt Recall the recording data gt Expand the timeline of the time bar to a greater unit of time gt YES Collapse the timeline of the time bar to a smaller unit of time gt E Use this to move to a previous time that is hidden in the time bar as it is expanded to a greater time unit gt J Use this to move to a next time that is hidden in the time bar as it is expanded to a greater time unit 5 Click a thumbnail channel or use the A V lt gt buttons on the remote control to move to a desired channel and press ENTER You can check the video in lt PREVIEW gt FJ Click to move to a desired time or simply double click a desired time in the time bar to play the video data on that time 6 Press the ENTER button again on the remote control with the mouse or simply double click on the channel You will move to the playback screen 7 If you want to stop playing and return to the search screen press EXIT or SEARCH on the remote control You can also click lt MENU gt in the left corner and s
64. gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 46 System Setting Buzzer output You can notify the user of the event using the buzzer gt DURATION TRANSPARENT Keep the buzzer out for as much time as the event lasts UNTIL KEY Keep the buzzer out until a mouse or remote control button is pressed 5 300 SEC Keep the buzzer out for as long as specified Display If an event occurs you can display the video screen or a popup message to notify the user of the event gt VIDEO POPUP Display the video channel that is synchronized with the event on a single split screen Set the DURATION of the single split screen TRANSPARENT Keep the video popup displayed for as much time as the event lasts UNTIL KEY Keep the video popup displayed aed until a mouse or remote control button is pressed as 5 300 SEC Keep the video popup displayed a for as long as specified If multiple events occur at the same time or if multiple event related video channels exist the video popup will be displayed in the maximum split screen mode rather than the single split screen mode gt OSD POPUP This will notify the user of the event with a popup message if an OSD popup event occurs You can adjust the duration of the popup message UNTIL KEY Keep the OSD popup
65. gt of the NVR page 38 v Enter the DDNS address and web service port in the address bar of the browser ay http 001CB8123456 DVRLINK NET 8080 In a router network you have to set the Port Forwarding and DMZ Setting to allow access from outside For the necessary settings of the router refer to the user manual of the router or contact the manufacturer of the router 6 8 Web Viewer 1 Provide the user ID and password Connect to 192 168 1116 v The default User name ADMIN the default rm i password is 1234 1 The server 192 168 1 ia apes saat i Lerner ered Warning This server is requesting that your username and without a secure conection User manne ADMIN Password Pritt 2 Click the upper warning bar to install the Activex S WEB Remote Viewer Windows Internet Explorer Go EA E http 192 168 1 116 8585 html live htm tid mi mb imme Install This Add on For All Users on This Computer What s the Risk v If you fail to download the ActiveX control move to Tools gt Internet Options Security Custom Level Download unsigned ActiveX control and change its setting from Disable recommended to Enable and then click OK WEB Remote Viewer ml Esana 1h TE be This website wants to install the followig Information Bar Help Internet Explorer Security Warning 3 Click lt Install gt Do you want to install this s
66. he A lt gt ENTER buttons on the remote control or use the mouse to set each option of the image menu a 3 Click lt ADVANCED gt and configure the display settings in detail for each camera as necessary v The advanced setting items may differ depending on the camera model 4 To apply the change click lt APPLY gt in the bottom of the screen ba Lae 5 When done press the EXIT button on the remote F control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu It is advisable not to change the lt ADVANCED gt settings once you completed the initial settings properly Covert Setup You can set to hide the camera video so that a specific user or user group can not view Set a channel s that you want to hide from a specific user or user group 1 From lt SYSTEM SETUP gt lt CAMERAS select lt COVERT SETUP gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select a covert channel s from a specific user group gt ADMIN MANAGER USER Set them to lt ON gt The selected channel will be hidden from the applicable user account gt LOGOUT Set it to lt ON gt When the user logs out the selected channel will not be displayed 3 Select display title on live view screen for covert channel either COVERT or NO VIDEO To activate this settings user need to logoff then login NVR again 4 T
67. he GND port 3 To ensure secure connection release the button and pull out the wire to check if it s not pulled out 4 To remove the wire pull it out while holding the upper button To connect the alarm output signal Connect the signal line of an alarm output device to the rear ALARM OUT port 1 Check the relay output type of Normal Open or Normal Close before selecting a proper type N O or N C While holding the N O or N C button arrange the alarm signal cable through the hole under the button v N O Normal Open normally Open but switching to Close if an alarm out occurs v GND Insert the grounding wire v N C Normal Close normally Close but switching to Open if an alarm out occurs 2 Insert the grounding wire in the GND port 3 To ensure secure connection release the button and pull out the wire to check if it s not pulled out 4 To remove the wire pull it out while holding the upper button INSTALLATION Communication Port ALARM OUT RS 485 lt i k 3 a CAMI CaM 3 CAMS CAM 7 WANCU PLIH o e fai ste ALARMIN RS232 OC aay L i E gt eS 3 E p g CAM2 CAM CAME coms LAN OOWNUI r eSATA RS 485 Connection Connect the keyboard controller You can connect a text in device such as POS or ATM After connecting the control device be sure to match the connection settings between NVR and device Make communication settings in lt Control Device gt page 43 1 Use
68. he previous menu 2 42 System Setting Storage You can configure the settings of and view information of the disk and external storage device Disk Information It will show information about the connected disk 1 From lt SYSTEM SETUP gt lt STORAGEs select lt DISK INFORMATION gt 2 Use the A V lt gt ENTER buttons on the remote control or use the mouse to select either lt INTERNAL gt or lt EXTERNAL STORAGE gt Please check the status for each connected device gt START END TIME show the start time and end time of data stored in each disk gt STATUS check if the connected disk is being used by the NVR If you encounter a problem with the disk the NVR will terminate the connection to the disk and mark it as Not In Use gt CAPACITY show the capacity of the disk gt MODEL indicate the disk model gt S M A R T STATUS Read the S M A R T information of the disk and check to display if the current disk is in normal operation NORMAL The disk is in a normal state CHECK The disk has an error so that you need to check the disk or the connection cables of the disk If you leave the problem unresolved no recording may be enabled So it is recommended that you replace the disk immediately ERROR The disk fails or is unable to use due to an error of the disk or the cable The disk should be replaced immediately Contact the retailer or the customer service to replace the disk
69. ing it lt Keep the product away from humidity lt Ensure that all devices connected to the product should be properly earth grounded In operation mode Comply with the following instructions to prevent a fire explosion system failure or electric lt If you need to open the cover consult with a service person who could help you do what you want to do Do not connect multiple devices to a single power socket Keep the product away from dust or too much combustible substances ex propane gas Do not touch it with wet hand Do not insert a conductor in the vent of the ventilation system Do not apply excessive force to unplug the power cord ooo Disassembly amp Cleaning lt When cleaning on the surface use a dry cloth lt Do not wipe the product using water paint thinner or organic solvents lt Do never dismantle repair or modify the product by your own During installation To prevent an accident or physical injury and to operate NVR properly please comply with the followings lt V Secure at least 18 centimeter of distance between cooling fan and wall for a proper ventilation lt Install the product on a flat surface lt Keep it away from direct sunlight or excessive temperature While in use Do not apply force to or shake it while using it Do not move throw away or put excessive force to it Using any unrecommended HDD may cause a system failure Check the compatibility list and use only compatible
70. n If you want to delete the user click lt DEL gt next to it When done click lt OK gt to apply the change ADD x USER ID PASSWORD GROUP ADMIN EMAIL EMAIL NOTI COVERT Ok CHANNEL Group Permission Setting You can grant different user groups different GROUP AUTHORITY permissions to a specific menu Mark the checkboxes of the menu items accessible by the user group RECORD SET When done click lt OK gt to apply the changes ae v For more information about the accessible menu items refer to Group Authority page 35 Web Viewer Network Network Setting You can check the network connection status and IP SETUP change the baud rate Change the maximum transfer rate and click lt OK gt to apply it v For more information about each network entry refer to IP Setup page 37 DDNS Setting ee You can configure the DDNS settings so that C remote users who are connected to the network NaRTESTOEE DONS REGISTRATION 1 can access remotely n Change the DDNS settings and click lt OK gt to apply the changes Email Setting aisi You can register and test an email address so that an email notification is delivered at a specific interval or if an event occurs Provide the necessary information and click lt OK gt to apply it For more information refer to Email page 38 i Web Viewer System Date Time Setting Specify the current date and time DATE TIME When done click lt OK gt
71. ng data 3spitmode 4 Sequence Set the sequence mode switch to the next camera or select the full screen mode You can turn on off the voice signal 5 Play button bar i 6 Ti 6 Time Selection 6 Time Selection Specify the start time of playback time tine 8 REFRESH Reload the time line PLAY Play the video that satisfies your search criteria Backup Archive the video that satisfies your search criteria STA Selecta channel isted in the screen 10 Screen Print out the current screen Image Capture Capture the selected image ActiveX Settings Configure the ActiveX settings or specify the saving path of th e captured image 74 Web Viewer Search by time Use the timeline to search for the data recorded in the NVR 1 Select a date that you want to search stanch OY Ta 2 Click lt REFRESH gt oe i a E 3 Check the existence of recording data in the bottom time line and specify the time range for your search You can specify the start time by moving the time bar 4 Click lt P LAY gt gt REFRESH If your changes are not applied to the current screen reload the changes gt PLAY Play the searched video gt Backup Archive the recorded video Search by event You can sort the recording data items by event to avent facilitate your search z SEARCH ET EVENT 1 Mark the checkbox of the event that you want om STE Ge a a ia to search for eee eee O E ee 2 Specify the start
72. o remove them Keep the NVR away from a heat source such as heater Install it in a flat lower area with good ventilation If the problem persists contact the retailer or service center El To monitor the normal operation of the NVR it is recommended not to change the buzzer output settings of the fan failure event and the temperature fail event Network gt TROUBLE IN INTERNET CONNECTION Occurs if the Internet connection to the NVR fails If you do not want to connect the NVR to the network leave the lt Action gt item blank gt FAIL IN REMOTE LOGIN This event occurs if a remote client fails to log in due to an invalid ID or password You can specify the times of clicking lt gt to trigger the event gt FAIL IN DDNS UPDATE This event occurs if the NVR tried to update the DDNS address but failed v lf the DDNS address fails to be updated the NVR may not connect to a remote client If this is the case enter the IP address from the client side to allow access from the NVR This is just a temporary measure For the IP address move to and check lt EXTERNAL IP ADDRESS gt from the lt NETWORK gt window Note that the lt EXTERNAL IP ADDRESS gt is subject to change if the NVR does not use the static IP EJ Note that the lt EXTERNAL IP ADDRESS gt can change at any time in a dynamic IP environment 51 Record Setting You can configure the record settings for the NVR Only authorized users can access the
73. o apply the change click lt APPLY gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu To change the covert settings from user group to user move to the lt U SER gt menu and make necessary changes page 34 Motion Sensor Set the motion sensor of the camera so that it can detect a motion event 1 From lt SYSTEM SETUP gt lt CAMERAS select lt MOTION SENSOR gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to specify the use of each option item gt ACTIVATION turn on or off the motion sensor gt MOTION MARK Set it to lt On gt The video window will display the motion mark if a motion is detected System Settin gt SENSITIVITY Set the sensitivity level of the motion sensor to either Daytime or Nighttime gt MINIMUM BLOCKS Set the minimum number of blocks that will be considered an event to Daytime or Night if a motion is detected in several blocks in the motion sensor area gt AREA SETUP Specify the motion detection area 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu v The above options such as lt SENSITIVITY g
74. oftware on Name WebViewer Control Publisher CBC Co Ltd x More options Don t Install 4 When the installation is complete GOO x Sc ve ti en you will see the live screen _ gg LL Web Viewer Live Live Screen Ata Glance a uve WEB Ren ve 5 T k Ja TE i y l i d rie gt ite y 5 Py ey P ae gt ot ar natn 4 l ak au s TIT Item Description 1 View selection tab i 2 Live Display the live screen of the currently connected NVR 3 SplitMode 4 Sequence Set the sequence mode switch to the next camera or select the full screen mode 5 Status oro Refresh Time Reload 6 Voice transmission With the microphone your voice will be transmitted to the NVR or you can turn on or off the output of the voice signal output of the voice signal 7 Channel Selecta channellisted inthe sereen 8 Save Save the live video on the screen Print Print out the current screen Capture Capture the selected image ActiveX Settings Configure the ActiveX settings or specify the saving path of th e captured image 70 Web Viewer Switching the split mode Click the Switch button to switch the mode as follows LJ Eel fell Ga G A P CHICAMT ia D e D lt 1 split Mode gt O E el b E H P a Display Channa B amp lt 8 split Mode gt lt 9 split Mode gt Web Viewer To save the video 1 Click lt IA
75. or more information see the Continuous Recording page 54 4 To apply the change click lt APPLY gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 2 4 E z X 25 7 4 55 Record Setting Alarm Recording Specify the recording size of the alarm event if it occurs and make schedule for that recording 1 From the lt RECORD SETUP gt menu select eae lt ALARM RECORD gt 2 Use the A V lt gt buttons on the remote control or use the mouse to select either lt SIZE FPS QUALITY gt or lt SCHEDULE gt 3 Set each item of lt RESOLUTION gt lt FPS gt lt QUALITY gt and use of the lt AUDIO gt for the alarm recording For more information see the Continuous Recording page 54 4 To apply the change click lt APPLY gt in the bottom of the screen 5 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Panic Recording In panic recording mode you can specify the recording size and quality of the video 1 From the lt RECORD SETUP gt menu select S monene lt PANIC RECORD gt ee 2 Set each item of lt RESOLUTION gt lt FPS gt lt QUALITY gt and use of the lt AUDIO gt for the panic recording F
76. or more information see the Continuous Recording page 54 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu Record Setting Network Streaming You can specify the maximum size of network streaming for remote users and set the FPS Even if you set the resolution and FPS to high for the network streaming the NVR will reduce the size or FPS according to the network RECORDING status Speed before transferring the recording omer video 1 From the lt RECORD SETUP gt menu select lt NETWORK STREAMING gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select an item that you want to edit 3 Set the lt MAX RESOLUTION gt and lt MAX FPS gt for each channel 4 When done click lt OK gt To apply the change click lt APPLY gt in the bottom of the screen 6 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu O1 When split screen mode is selected low resolution image will be displayed on each channel of DMS lite or Internet Explorer even though high resolution is selected on this menu 57 Search You can configure the record settings for the N
77. rnal reserved data 6 4 Archiving To start the Archive menu Using the Archive menu during playback 1 During the playback click lt NEW ARCHIVE gt 2 The ARCHIVING SETUP window appears where you can reserve the data 3 Click lt MENU gt in the lower left corner and select the lt ARCHIVE gt menu 4 Press the ARCHIVE button on the remote control Using the Archive menu during monitoring 1 Click lt MENU gt in the lower left corner and select the lt ARCHIVE gt menu 2 Press the ARCHIVE button on the remote control Archive You can archive the searched data or reserve It 1 From the lt ARCHIVE gt menu select lt ARCHIVE gt 2 9elect a date for the archive from the calendar in the left v The date containing recording data will be marked in a colored box FIRST The first date of recording is automatically selected LAST The last date of recording is automatically selected 3 Check the lt START gt and lt N D gt times v Drag the timeline to specify the start and end time 4 Mark the lt LOG gt and lt CODE C gt checkboxes ARCHIVING and select to include the archiving 5 Click lt QU ERY gt The results will be listed in lt ARCHIVING INFO gt v The maximum backup capacity for one time is 20GB v Ifthe archiving request exceeds 20GB the end time will be adjusted to within 20GB 6 If you want to import to a storage device connect it to the NVR and click lt EXPORT
78. st email and check if the test email is delivered normally To apply the change click lt APPLY gt in the bottom of the screen When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will return to the previous menu 37 System Setting Network Status From the network map screen you can check the internet connection status and IP camera connecti on status and check also the details of the connection status for each camera 1 From lt SYSTEM SETUP gt lt NETWORK3 gt select lt NETWORK STATUS gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to select one between lt NETWORK MAP gt and lt DETAIL STATUS gt 3 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation message appears and you will gt MAC ADDRESS Indicates the internal MAC address of the NVR gt DDNS ADDRESS Indicates the internal DDNS address of the NVR gt RTSP SERVICE PORT Indicates the network port of the video service For remote service the router must have set up the port forwarding gt WEB SERVICE PORT Indicates the web service network port For the remote service to be enabled the corresponding port of the router should have set up the port forwarding gt DDNS UPDATE STATUS Shows if the DDNS address was registered to the DDNS server normally
79. t SSHUT DOWN PASSWORD a pee a press the POWER button onthe f f2f gt f4fsf s zfs sfo Ww r i Use the virtual keyboard to enter the password HHHH Be sure to turn off the power switch in the rear _ _ _ panel Bid chi eo ol lt gt 7 ikoa If you turn off the system in an abnormal manner CANCEL such as removing the power cord while the system is in operation the disk will have or increase the bad sectors causing data loss and shortened life cycle of the disk 19 Monitoring Live Screen Ata Glance The live screen largely consists of three components video window status bar and timeline zone Video Window Quick Menu Timeline Status Bar Video Window Icons used in the video window i esecription S Show the camera ID Camera ID CAM1 Record Mode C Icons Displayed if an event recording is reserved Display the recording status when an alarm occurs Display the status of the emergency recording The audio signal is transferring to the connected camera via the microphone A M P I O Icons O Z Motion Detection X Icon a Status Bar Press the v button on the remote control or place the mouse in the lower area of the screen to display the status bar zovs Show the ID of the user who has currently logged in screen Control less Select a split mode Buttons a i Display or hide the OSD menu on the screen ey Move to the Digital Zoom
80. t and lt EN D gt times in the left of the event search list 3 Select a channel to search 4 Mark the checkbox of the event to search from The lt EVENT gt list 5 Press the lt SEARCH gt button The search results will be listed as shown gt TYPE displays the event type gt TIME displays the recording start time gt CONTENTS shows the details of the event found gt ORDER BY If you select lt OLDEST gt the list will be sorted with the earliest one on top 6 Double click a desired event or click lt PLAY gt in the lower right corner to move to the play screen 7 If you want to stop playing and return to the search screen press EXIT or SEARCH on the remote control You can also click lt MENU gt in the lower left corner and select a desired menu mM MOr O82747 hasec by ADMIN Baan SRZ 2238 g B gvi E gs Bist PLAY If you want to play 1 To play the searched data You can search for and play a searched data 2 To play with the live viewer Simply double click a desired time point in the right corner of the play screen v Ifyou move the cursor to the rightmost the Timeline bar will be displayed Select a desired channel in the live screen and right click to select lt P LAY gt in the context menu Then select a desire play time Playback screen configuration Video Window Playback channel selection menu Timeline MEMU Split screen Selection menu Play Time Pla
81. t and lt MINIMUM BLOCKS gt and how to set the motion area may be restricted v depending on the specification of the connected camera Motion Area Setup From the motion setup window click lt AREA SETUP gt in the right corner to display the area setup screen Setting the motion area may differ depending on the camera model Below is a typical setting of the motion area A a 1 Click lt AREA SETUP gt to move to the motion me Lasalle o Ba nm l ern iT Saal 7 sae area setup screen 2 If using the remote control press the ENTER button to mark the current position 3 Use the arrow buttons to move to a desired block and press ENTER The area setup will begin Then use the arrow buttons to specify the area Alternatively you can use the drag and drop method to specify or release the area as using mouse 4 If you select the specified area again it will be released 5 Press the EXIT button on the remote control or right click any area to display the popup window as in the right picture From the popup window move to and specify the lt SENSITIVITY gt and lt MINIMUM BLOCKS gt for the current channel gt CHANNEL select a channel that you specify the sensitivity and minimum blocks for gt SENSITIVITY 1 Low 10 High The higher the number is the more higher the sensitivity level becomes gt MINIMUM BLOCKS 1 High 10 Low The i lower the number is the higher the sensitivity level be
82. to apply the changes v For For more information about each NETWORK TIME SYNCHRONIZATION of the time and date settings refer to Date Time page 39 TIMEZONE DST System Management You can configure the access settings of log in log out and auto logout STSTEM MANAGEMENT System Information You You can check information of system firmware version disk space and network settings as well as the status information of network connection and alarm I O SYSTEM INFORMA TOH STATUS CONTROL DEVICE Control Device Setting Set the connection of both the remote control and the keyboard control Change the communication settings and click lt OK gt to apply the changes v For more information about each communication item refer to Control Device page 43 Web Viewer Storage ew Device Information a You can check a list of internal external storage devices aaeaoinesirs OMMAN 112022 connected to the NVR as well as the recording a a time information of each device S M A R T Status 3 MART SETUP You can check the S M A R T status for each of niema adema the internal and external devices v What is S M A R T This is a sort of HDD self diagnosis tool that detects anyerror on the system and alerts the user if an error occurs Web Viewer Sensor Alarm Output Specify the alarm output conditions with the work schedule When done click lt OK gt to apply the changes i CANA
83. to the USB port of NVR LOAD Apply the settings of the storage device to the NVR Connect the storage device to the USB port of NVR PASSWORD Open or close the dialog box for settings of the menus quit system settings record settings backup and search If itis set to lt Off gt note that the ADMIN account is only effective and access to all menus will be restricted EXPIRED TERM OF PASSWORD You will be prompted to change the current password after a certain period of time AUTO LOGOUT If there is no user input for a certain period of time you can set to log out automatically WAIT TIME Specify the waiting time for Auto Logout AC POWER FREQUENCY Select AC power Frequency of your area 60Hz maximum frame rate will be set to 30fps 50Hz maximum frame rate will be set to 25fps If you have a flicker on the image select suitable the frequency t IESTI MARAG LMENT SYSTEM SYSTEM 3 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen to return to the previous menu 40 System Setting To perform the upgrade 1 Connect the USB storage device that contains the updatable files 2 Click lt USB gt 3 Select one s from the updatable files LIST listed in lt F W gt 4 Click lt UPGRADE gt lt 5 When the confirmation message appears click oo Ezz lt OK gt 6 The progress bar displays the progress of the firmware
84. udio signal to use in live monitoring mode gt Frame Only Only the frames key frames will be transferred gt Type Auto The DVR will optimize the quality and FPS to the network status and specification of the connected PC before transferring the data Main The video will be transferred in high definition HD Second The video will be transferred in a medium definition SD 5 When done click lt OK gt to save your settings Web Viewer Status tab Click lt Status gt at the bottom of the screen You can check the event occurrence for each somone channel of the connected NVR tia a Log tab Click lt Log gt at the bottom of the screen You can check the log of the connected NVR LOG PTZg tab Click lt P T Z gt at the bottom of the screen You can control the operations of a PTZ camera Adjust the focus zooming and iris of the camera You can use the arrow buttons to control the operations step of the camera l gt Pattern You can configure various settings of the camera including the zooming and movement Applied to some PTZ cameras only gt PRESET Move the camera in a predefined direction gt Swing The camera will move back and forth to a set position Web Viewer Search Click lt Playback gt to display the remote control screen for the NVR Search Viewer at a Glance Description 2 2 Playback Screen 2 Playback Screen Play the recordi
85. ust the play speed in playback mode EXIT Exit from the current screen and return to the previous screen ENTER Select a menu item or apply your settings LOGOUT PANI SEARCH ARCHIVE SETUP ALARM asna kanu gt 10 fQ da x DISPLAY SEQ ae j 4 ERZEZE KEYLOCK AUDIO Soi gt t SNAPSHOT PREV NEXT RESERVE ek a aa gt gt a i Po A A gt N we k 1 i lt I ENTER gt 1 11 i a g oo J oe 4 4700M a N y AS 4 N Ve A LOGOUT LOGOUT PANIC Start the emergency recording ALARM Show the alarm status with a popup window SETUP Display the system setup menu ID Set the remote control ID LOG Display the log list KEYLOCK Lock any operation on the unit AUDIO Display the audio channel Selection window RESERVE Turn on or off the power MENU Display the tool bar on the live screen A TaD Use to move through the menus PTZ ZOOM Enter the PTZ or digital zoom Mode and control the operation OVERVIEW Change the remote control ID The remote control will be active only if the remote control ID matches with that specified on the NVR If multiple NVRs are installed on one place and you have just a single remote control use the ID button to set the remote control ID Only the ID matching NVR can be controlled 1 From lt SYSTEM gt lt CONTROL DEVICE gt under the System Setup menu set the lt REMOTE CONT
86. y Bar Video Window Display the current video Timeline Display the type of recording data The vertical bar in the timeline indicates the current point of playback Double click a desired point in the timeline to start playing the video from that point Once you drag to specify an area you can perform the backup or event search for that area Menu split screen selection menu For more information about how to use each button refer to Using the status bar in the live mode page 23 Play Bar You can start playing stop playing or change the play speed of the current video PLAY Event Search Search for events that occurred at the specified time and select an event to play from the list Playback channel selection menu ITEM Ll Description CAM1 Zoom Zoom the video of the selected channel The zooming function is active only in 1 split screen Start bookmarking Snapshot Capture Supported later Using the play bar TEM Description Jump 4 Reverse Fast Play The video will be reversely played at the speed of x64 gt 32 gt 16 gt 8 gt 4 gt 2 in this order Reverse Play Stop playing forward or playback temporarily Play Fast Forward The video will be played forward at the speed of x2 lt 4 lt 8 lt 16 lt 32 lt 64 in this order Start end Add a bookmark for the current playback screen Press this to display bookmark M the SET BOOKMARK window Provide each entr
87. y and click Start The arrow in the bookmark button blinks to indicate that the bookmarking is in process If you press the Bookmark button again the bookmarking stops and the current settings will be reserved Then the reserved data can be backed up in Archive menu or can be played in the RESERVED DATA MANAGEMENT menu 6 3 PLAY Bookmarking During playback you can add a bookmark for reserving the video data You can view the bookmarked data in the Archive menu which can be saved to a connected device for the backup purpose 1 2 v Provide a tag in the lt I AG gt item for data reservation Provide the details of the reserved data in the lt MEMO gt input box Click lt S TART gt You will return to the play screen with the backup progress To stop the bookmarking click lt BOOK MARK f gt To quit the bookmarking click lt S TOP gt To continue with bookmarking just click lt CONTINUE gt Click lt RESERVE gt You can export the reserved data to a connected storage device using the lt ARCHIVE gt menu What is the lt RESERVE gt function With the lt RESERVE gt function you can reserve data even in overwrite mode This is useful if you want to backup data but you have no backup device available such as USB memory If you use Reserve the recording days will be compromised When you have backed up the reserved data to an external device it is recommended to delete the inte
88. y the check frequency v What is S M A R T information v M A R T Self Monitoring Analysis and Report Technology is to detect a HDD that is likely to cause a problem in the future with a warning message 1 From lt SYSTEM SETUP gt lt STORAGEs select lt S M A R T SETUP gt 2 Use the A lt gt ENTER buttons on the remote control or use the mouse to check the S M A R T operation and specify the check interval gt S M A R T STATUS Read the S M A R T information of the disk and check to display if the current disk is in normal operation Click lt DETAIL INFO gt to view the details of the remote control and keyboard controller NORMAL The disk is in a normal state CHECK The disk has an error so that you need to check the disk or the connection cables of the disk If you leave the problem unresolved no recording may be enabled So it is recommended that you replace the disk immediately ERROR The disk fails or is unable to use due to an error of the disk or the cable The disk should be replaced immediately Contact the retailer or the customer service to replace the disk 44 System Setting v M A R T CHECK INTERVAL Specify the S M A R T check interval Click lt CHECK NOW gt to start checking 3 To apply the change click lt APPLY gt in the bottom of the screen 4 When done press the EXIT button on the remote control or click lt CLOSE gt in the lower screen The confirmation
89. ze frame rate ee 1 24 per second and quality ve agg ReSoUUTION ts MO Click lt gt next to each item to display the list of cae 192001080 a npe Of A values available ae ao oa cams soa E i net or e When you complete the recording size and schedule Daa SS settings click lt OK gt to apply your settings ee v For more information about the continuous ane recording size and schedule refer to a P Continuous Recording page 54 G 12 8 24 SELECT ALL Reverse All Delete Al OK CANCEL Web Viewer Motion Recording Set the lt SIZE FPS QUALIT Y AUDIO gt and the MOTION REC lt SCHEDULE gt to apply if a motion event occurs a _ Click lt gt next to each item to display the list of spompesconooooeesseooo values available n Complete setting the lt SIZE F PS QUALITY AUDIO gt seersowuw scneoue for the motion recording as well as the lt SCHEDULE gt l 7 and click lt OK gt to apply the changes v For more information about the motion s 1 recording size and schedule refer to Motion cae Eie E e eie eeel e Recording page 57 cama a a a EDD SESS Se oe eee cans oleae Alarm Recording E oveny Tee Set the lt SIZE FPS QUALITY AUDIO gt and the lt SCHEDULE gt to apply if a motion event occurs O slalelelatedefatotalalslelelelalatetatatmlete Click lt gt next to each item to display the list of i v mla D ciclo ce values available aa dona

Download Pdf Manuals

image

Related Search

Related Contents

ds-50 ds-40 ds-30 online instructions  Benutzerhandbuch  MINUTES of the 1st Casemaker training workshop for students & staff  F P NL E - Dungs Mobile  CSP SwitchKit Installation and Maintenance Guide    COS 6, COS 101 and COS 101S COS 6, COS 101  Voir fiche technique    

Copyright © All rights reserved.
Failed to retrieve file