Life Fitness CT5500 User's Manual
Contents
1. Life Fitness CT5500 and X9 Cross Trainers How To Install Shaft Collar Service Kit O34 Pedal Lever Nuts 2 Rocker Arms SX C O Torque 30 35 ft Ibs Bolt Bolt N O l l Clevis Covers Pedal Lever RT N iea a i Cover Screws 6 Anti Lift Torque li Bracket N i 6 10 in lbs a Anti Lift Bolts 2 N Arm Extension Torque 30 35 ft Ibs Outer Link Hex Bolt Cover RT 1 Remove the Outer Link Covers by removing six mounting screws from each Outer Link Cover 2 Remove the Anti Lift Bracket by removing two mounting bolts from each Bracket 3 Remove the Clevis Covers from the front of each Pedal Lever Assembly 4 Remove each Pedal Lever Assembly by removing the mounting bolt and nut at each Rocker Arm Joint and the hex nut from each Arm Extension 1 M051 00K61 A080 March 04 2004 Life Fitness CT5500 and X9 Cross Trainers How To Install Shaft Collar Service Kit Continued Washer Snap oe Ring Extension Allen Head z Cap Screw Flat Roller Washers 5 Remove the Allen Head Cap Screw from the end of the Arm Extension 6 Remove the Arm Extension and save the Arm Extension and Allen Head Cap Screw 7 Remove the Snap Ring Wave Washer and Flat Washers on outside of Roller and discard 2 M051 00K61 A080 March 04 2004 Life Fitness CT5500 and X9 Cross Trainers How To Install Shaft Collar Service Kit Continued Snap Ring Flat Washer g Roller Allen Head SA Gan2. Shaft w Collar Arm Cap Screw Extension Torque 30 35 ft Ibs Set Screws 8 Install the new Shaft Collar as shown in the illustration above in place of the discarded washers 9 Make sure the Roller turns freely before tightening the Set Screws on the Shaft Collar 10 Re install the Arm Extension Allen Head Cap Screw Pedal Lever Assembly and Outer Link Cover in reverse order Tighten hardware to specified torque values 3 M051 00K61 A080 March 04 2004
Download Pdf Manuals
Related Search