KRAM Interface Lead
Contents
1. Interface Leads Interface Leads Ath Move the 12pin mini Fakra connectors to the connector on cableset Instruction for If the original car connector is equipped with a plug in the CD changer E socket it will have to be moved to connector on the cableset If the car Line In cable 68785 VW AUDI SKODA ues connector is fitted with a plug in the Accessories slot It will also have to be moved to the connector on the cableset The Line in amp mute wires will have to be removed from the plug on the Interface Lead and fitted directly to the connector in the Accessories slot This is done by Remove the pin holder from the connector by lifting the locking mecha nism with a small screwdriver and pulling the pin holder outwards Remove the pins from the pin holder This is done by pressing the pin lock with a small screwdriver Insert the pins into the connector fitted into the radio connector Re member to point the pin locks in the right direction White Black Yellow White Made in Denmark by through the car front speaker Kram Telecom A S When the Interface Lead is installed correctly it will redirect your call Remember to use a carkit Interface adaptor to connect the carkit to the EN785 Line In cable P interface Leads Product description Line In cable 68785 VW AUDI SKODA 2003 Interface Leads are used for car stereos with a Line In func tion or VDA preparation It enables the use of the car speakers wh2. en answering making calls from your cell phone Thereby using the radios build in mute Speaker function This is achieved by connecting the carkit di rectly to the cars Line In input VDA connector By using the radios built in relays the telephone conversation is send through the car speakers while the radio is muted This way you will achieve a perfect hands free sound without interfer ence from the car radio For a complete cable set two item no is required The first is a car specific Interface Lead The second is a carkit specific In terface adaptor cable Power supply of the carkit All Interface Leads are delivered with a power connector for the carkit that way you avoid cut ting the cars wiring loom Please check the radio instruction manual for special issues regarding the connection and set up of the radio when con necting a carkit See our complete Interface program on www kram dk Interface Leads Installation description Line In cable 68785 VW AUDI SKODA 2003 1st Remove the radio and disconnect the Fakra connector from rear of the radio Insert the Interface Lead between the radio and the removed Fakra connector R p W Speakers Accessories i CD Changer Front view of connector 2nd Choose mute position This cable has two mute positions available Please chose the right mute position by switching the to bullet connec tors The correct position can often be seen on a label on the rad
3. io MUTE IN 1 is used for older VW Audi Skoda cars MUTE IN 2 is used for newer VW Audi Skoda cars gt EE 4 f ua t NI ALAN i ILAW 5 3rd Check ignition source Not all models have an ignition source in the prewired position in the cableset Therefore it is possible to disconnect the ignition wire from the cable set and connect it to an ignition source found elsewhere or red constant 12v wire by using the bullet connectors Alternatively a IGNIBOX item nr 69600 can be inserted to generate a arti ficial ignition lt RED Constant lt BLUE Ignition To carkit gt lt Continues on next page
Download Pdf Manuals
Related Search