Multibrackets 7350022739833 project mount
Contents
1. To Install The Projector On The Projector Wall Mount Connect the power cable and other cables to the projector Adjustment direction Adjustment buttons Wy To Adjust The Horizontal Roll CIB gt Adjustment buttons ii iii Adjustment direc on To Adjust The Horizontal Rotation M U L T I B R A C KETS 9 E a Adjustment direction To Adjust The Forward Backward Slide M Projector Mount Short Throw Deluxe 600 1300 Adjustment buttons Narwa tsika Batedicapacny MKA Be sure to read this manual thoroughly and to do the installation work safely Keep Adjustable angle Longitudinal inclination Level angle Yaw angle 5 3 directions this manual available for future reference Sufficient expertise is required for installing this projector wall mount Do not use the projector wall mount for purposes other than for which it is designed Adjustable range From the installation plate center horizontal distance 653mm 1243mm Important Safety Be sure to read this manual thoroughly to do the installation work Only qualified service personnel two or more should carry out installation or dismounting of the projector from the projector wall mount A Use with products heavier than the maximum weights Weight Capac2. e Connecting E M4 x 10 screws J b Do not use the extend arms Dy Ex F Connecting Screw from screws J Parts List Do Notuse D M3 X10 Connecting E M4 x 10 screws F M5X 12 lj Use Connecting E M4 x 10 screws J Adjust the leftward rightward slide Adjustment direction
3. ity lt 7kg indicated may result in instability causing possible ijury For safety reasons check the strength of the wall before installation If the wall is not strong enough reinforce it sufficiently before installation Do not make alterations to the projector wall mount 4 Do not install the projector wall mount on a wall subject to vibration or impact O To avoid fire do not install the projector with the projector wall mount in a humid or excessively dusty place Use the supplied accessories only Use of accessories other than those supplied may result in damage to the projector wall mount When dismounting the projector from the projector wall mount be sure to unplug the AC power cord and other connecting cables beforehand Donothit or hang any heavy objects on the projector wall mount If the projector wall mount is damaged stop use and contact a qualified service person immediately Please install this apparatus only on the horizontal surface instead of the slanting one Manufacturer is not liable for any damages or injury caused by mishandling or improper installation Checking The Supplied Accessories 29 Setting plate 1 Wall plate 1 Extend arms 4 Wall plate cover NO piareramtig designation quantity N fisrammani designation quantity A Screw M6X55 5 QP screw M5X25 4 B mi 10mm Anchorbolt 5 H M5 nuts 4 C J Al
4. len key 1 l spacer 8 0 4 D Op Screw M3X10 4 J a M6 Connecting screws 4 E Screw M4X10 4 K screw M6X10 4 F P Screw M5X12 4 To Set The Projector Wall Mount On The Wall To Set The Projector Wall Mount On The Wall gt 55mm o10 11mm Concrete wall mounting thickness mustbe wv a minimum 100mm Anchor bolt and serew A fd i M6 x 55 are needed to be used for installation Dry wall mounting thickness must be a minimum 70mm Only serew M6 x 55 is needed to be used for installation If the wall is not strong enough aom reinforce it sufficiently before installation 3mm i TY v aia Please contact manufacturer if you have il any questions about mounting surface issue i 7 i I l CAUTION Dry wall mounting Make sure both mounting holes are on center line ofthe stud Wooden Stud Center Line Remove the decorative cover Loose the screws and remove the projector mounting plate Extra screws and anchor bolt are backup a CEE Concrete wall mounting Use anchor bolt Wf A l y Wy il Not use anchor bolt To install The Projector On The Projector Wall Mount a Use the extend arms Projector mounting plate or Extend arms TEF F Connecting Screw from screws J Parts List Do Not use D M3X 10 Connecting STEWS E M4 X10 Us
Download Pdf Manuals
Related Search