Marshall Electronics FR-310 microphone
Contents
1. Note Your recording device may have internal gain controls that may need to be adjusted to get the best results Consult your device s user E R 310 manual for more information Switch 2 has three positions which are labeled Off On and Roll off Hot Shoe Mount Shotgun Microphone When this switch is in the Off position the microphone is off and will not draw power from the battery The On position turns the microphone on and sets it to record with no filtering The Roll off position sends the signal through the microphone s high pass filter to reduce or eliminate low frequency noise For example older camcorders sometimes produce low frequency motor noise The high pass filter will reduce or eliminate this noise Three position gain switch Specifications m Integrated windscreen ducer 10mm Electret Condenser Polar Pattern Supercardioid oO Frequency Response 40Hz 20kHz Output Impedance 250 ohms s ae ower Requirements 1 5V AAA Battery Bass Roll Off 6 dB octave at 150Hz Gain 5dB 0dB 5dB Output Connector 1 8 3 5mm Mini TRS Standard hot shoe mount Output Signal Mono irae a A Solid metal construction Dimensions 5 3 x 2 5 135mm x 63MM Weight 0 30 Ibs 136 g MXL FR 310 Thank you for choosing the MXL FR 310 video microphone The FR 310 is Installing the battery 0 the perfect microphone for camcorders high definition d2. ght is located on the right side of the microphone There are two switches on the right side of the FR 310 When the indicator light is illuminated the battery is close to running out One switch adjusts the microphone s gain settings of life and should be replaced The light will not be illuminated when the battery is not close to running out of life or when the microphone is turned off The indicator light will flash when the microphone s power switch is Switch 1 has three positions which are labeled Low Med and moved to the On position High These positions reflect the microphone s gain settings We recommend that you initially set this switch to Med and try the other settings if you experience low output or overloading One switch turns the microphone On Off or activates the bass roll off high pass filter Note Remember to turn the microphone off when it is not in use
3. igital SLR cameras Remove the battery cover on the side of the microphone by sliding it and portable recording devices To get the best performance from your new backward Insert the battery with the positive terminal facing the front microphone please take a few minutes to read this manual of the microphone Replace the battery cover by sliding it forward until it clicks into place Features Solid metal construction Integrated windscreen Three position gain switch E E Attaching the microphone A standard hot shoe mount is located on the bottom of the FR 310 Rotating the knurled tightening ring counterclockwise will make mounting the microphone easier Tightening the ring after the microphone is Bass roll off high pass filter securely in the camera s hot shoe mount will improve stability Sanear OE SOGE MIOUNI The FR 310 is equipped with a captive signal cable that has a 3 5mm jack Power Insert the jack into the external microphone socket on your recording device The FR 310 is powered by an internal AAA battery Use a fresh battery to Note Some recording Bauibes require changing the position of a switch get the best performance from the microphone We also recommend or changing the eaves s settings to work with an external microphone carrying a spare battery Consult your device s user manual for more information A fresh battery should provide up to 500 hours of continuous recording Using the switches A battery indicator li
Download Pdf Manuals
Related Search