Samsung UE22F5000AK 22" Full HD Black
Contents
1. ENTERC This mode provides optimized condition for watching sports games When the sports mode is on the picture and sound modes are set to Stadium automatically If you turn the TV off while watching Sports Mode the Sports Mode will be disable gt English L Using the Satellite System For the details you can find an additional web manual on our website www samsung com Auto Tuning MENUO Broadcasting Auto Tuning ENTERC When Aerial Source is set to Satellite Channel Type Select the Channel Type to memorise gt Satellite Selects the satellite to scan The option may differ depending on country Scan Mode Select a scan mode for the selected satellite Re initialise Selects the scanning mode of the selected satellite This function is available after connecting to satellite aerial and set the channels Search Mode Sets search mode using up down buttons English Manual Tuning MENU Broadcasting Channel Settings Manual Tuning ENTERL Scan Satellite Transponder Selects the transponder using the up down buttons Scan Mode Selects either free or all channels to store Network Search Select to search network or not Signal Quality Display the current status of broadcasting signal Information on a satellite and its transponder is subject to change depending on the broadcasting conditions When setting is completed move to Search and press2. MENU System Time Sleep Timer ENTERC e Sleep Timer Geka Automatically shuts off the TV after a preset period of time 30 60 90 120 150 and 180 minutes Use the A V buttons to select a period of time and then press ENTERL4 To cancel the Sleep Timer select Off English LI Setting the On Off Timer MENU System Time On Timer lt or gt Off Timer ENTERL e On Timer You can set up three separate On Timer configurations On Timer 1 On Timer 2 On Timer 3 Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day you want to activate the timer The YW mark indicates the day you ve selected Time Set the hour and minute Volume Set the desired volume level English Source To select the source of the content that will play when the TV turns on You can Select TV and have the TV display a specific air or cable channel Select USB and have the TV play back photo or audio files from a USB device Select a source on your TV that you have connected a set top box to and have the TV display a channel from the set top box The USB device must be connected to your TV before you can select USB English If you select a source other than TV or USB you must Have a cable or satellite set top box attached to that source Set the set top box to the channel you want to watch when the TV go
3. Audio Delay Correct audio video sync problems when watching TV or video and when listening to digital audio output using an external device such as an AV receiver Oms 250ms gt English Dolby Digital Comp This function minimizes signal disparity between a dolby digital signal and a voice signal i e MPEG Audio HE AAC ATV Sound select Line to obtain dynamic sound and RF to reduce the difference between loud and soft sounds at night time Line Set the output level for signals greater or less than 31dB reference to either 20dB or 31dB RF Set the output level for signals greater or less than 20dB reference to either 10dB or 20dB Reset Sound MENU Sound Reset Sound ENTERC Reset all sound settings to the factory defaults English 1 Selecting the Sound Mode When you set to Dual l ll the current sound mode is displayed on the screen A2 Stereo Mono Mm f Automatic change NICAM Stereo 0 Mmo Mono Automatic change Dual Mono Dual Dual s Dual Il z Z lf the stereo signal is weak and an automatic switching occurs then switch to the mono Only activated in stereo sound signal Only available when the Source is set to TV English L Executing initial setup E Setup MENU System Setup gt ENTERC Configure the channels and the time when setting up the TV for the first time or when resetting the unit Execute the initial setup following instructions that t
4. Edit Favourites ENTERC You can add edit or delete favourite channels 1 Go to Edit Favourites screen 2 Press the A V buttons to select the desired channel and then press ENTERL4 button 3 Choose a specific favourite list among Favourites 1 5 using EB Change Fav button and then press the Add button The selected channel has been added in Favourites 1 5 One favourite channel can be added in several of favourites among Favourites 1 5 English Using the coloured and function buttons with the Edit Favourites e Red Category Change order Category Changes the channel mode to All TV Radio Analogue Data Other Recently Viewed Most Viewed The selected channel mode is displayed Change order Changes the favourite channel order LC Done Completes changing the channel order E Green Change Fav Changes favourite list among Favourites 1 5 Yellow Add Delete Add Adds selected channels to Favourites 1 5 Delete Deletes the favourite channel from Favourites 1 5 D Blue Select All Deselect All Selects or deselects all channels at once English Go To Goes to channel directly by pressing numbers 0 9 e Page Move to previous or next page Tools Displays the option menu The option menu items that appear may differ depending on the channel status and type Copy to favourites Edit the selected favourite channel in Favourites 1 5 Rename
5. If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses English Network Setup Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps 1 Goto Network Status screen Network Network Status 2 Youcan check the connected status on the screen If it fails to set automatically check the connection of LAN port English If you cannot find network connection values or if you want to set connection manually 1 Select the IP Settings on Network Status screen When it fails to connect the network automatically the IP Settings is available to select 2 Set IP setting to Enter manually Move to each field using A W lt b buttons Enter the network connection values and then select OK 4 The network connection screen appears and network setting is done gt English The check list for wired network connection failure Wh
6. Selects the Network ID setting mode among Auto or Manual gt Network ID When Network is Manual you can set up Network ID using the numeric buttons English e Frequency Displays the frequency for the channel differs in each country e Modulation Displays available modulation values e Symbol Rate Displays available symbol rates e Cable Search Option depending on the country amp cable channels only Sets additional search options such as the frequency and symbol rate for a cable network search Start Frequency Stop Frequency Set the start or stop frequency differs in each country Symbol Rate Displays available symbol rates Modulation Displays available modulation values English L Using the Channel menu MENU Broadcasting Channel List ENTERC E Channel List The Channel List contains the channels your TV displays when you press the channel button You can view channel information All TV Radio Data Other Analogue or Favourites 1 5 Press Mode button to change the channel mode or press lt Sorting button to change the channel order according to channel number or name on the list When you press the CH LIST button on the remote control Channel List screen will be displayed at once gt English Channel Sorting e Number Name Arranges the channel order according to channel number or name on the list Channel Mode e Air Cable Switches to Air or Cable e Edit F
7. MENU Broadcasting Subtitle ENTERL Use this menu to set the Subtitle mode Subtitle Switches subtitles on or off Subtitle Mode Sets the subtitle mode Subtitle Language Sets the subtitle language If the programme you are watching does not support the Hearing Impaired function Normal automatically activates even if the Hearing Impaired mode is selected gt English is the default in cases where the selected language Is unavailable in the broadcast Primary Subtitle Sets the primary subtitle Secondary Subtitle Sets the secondary subtitle English E Audio Options digital channels only MENU Broadcasting Audio Options gt ENTERC e Audio Language Change the default value for audio languages Primary Audio Secondary Audio You can set the primary or secondary audio The available language may differ depending on the broadcast English Audio Format When sound is emitted from both the main speaker and the audio receiver a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver In this case use the TV Speaker function Audio Format option may differ depending on the broadcast 5 1ch Dolby digital sound is only available when connecting an external speaker through an optical cable e Audio Description not available in all locations This function handles the Audio Stream for the AD Audio Description which P is sent al
8. Off External Speaker On When Speaker Select is set to TV Speaker e TV Speaker On External Speaker On If there is no video signal both speakers will be mute English Auto Volume To equalize the volume level on each channel set to Normal Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night To use the volume control on the source device connected to the TV set Auto Volume to Off on the TV Otherwise a change to the volume control of the source device may not be applied English E Additional Settings MENU Sound Additional Settings ENTERC e DTV Audio Level digital channels only This function allows you to reduce the disparity of a voice signal which is one of the signals received during a digital TV broadcast to a desired level According to the type of broadcast signal MPEG HE AAC can be adjusted between 10dB and OaB To increase or decrease the volume adjust between the range O and 10 respectively gt English e Digital Audio Out Digital Audio out is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player Audio Format You can select the Digital Audio output format The available Digital Audio output format may differ depending on the input source By connecting to 5 1ch speakers in a Dolby Digital setup maximize your interactive 3D sound experience
9. PC Card e CAM video transcoding You can configure the setting to transcode the video codec from the CAM automatically Turn it Off if you do not want to use it You must use a CAM that supports transcoding the video codec English e Application Info View information on the CAM inserted into the Cl slot and on the Cl or Cl CARD which is inserted into the CAM You can install the CAM anytime whether the TV is on or off 1 Purchase a Cl CAM module at your nearest dealer or by phone 2 Firmly insert the Cl or Cl CARD into the CAM in the direction of the arrow 3 Insert the CAM with the Cl or Cl CARD into the common interface slot in the direction of the arrow so that it aligns parallel with the slot 4 Check if you can see a picture on a scrambled signal channel English L Changing the Preset Picture Mode E Picture Mode MENU Picture Picture Mode ENTERC Select your preferred picture type When connecting a PC you can only make changes to the Entertain and Standard Dynamic Suitable for a bright room Standard Suitable for a normal environment Natural CME Suitable for reducing eye strain Movie Suitable for watching movies in a dark room Entertain Suitable for watching movies and games It is only available when connecting a PC English A Adjusting Picture Settings E Backlight Contrast Brightness Sharpness Colour Tint G R Your television has several setting
10. on the top of the screen And then press the ENTERL button you can see the details of the programme Scroll lt gt to view information for a desired programme while watching gt the current channel e Scroll A V to view information for other channels English _1 Memorizing channels E Aerial MENU Broadcasting Aerial gt ENTERC Before your television can begin memorising the available channels you must specify the type of signal source that is connected to the TV English E Auto Tuning depending on the country MENUO Broadcasting Auto Tuning ENTERC Automatically allocated programme numbers may not correspond to actual or desired programme numbers If a channel is locked the PIN input window appears Auto Tuning Aerial Air Cable Select the aerial source to memorise When selecting Air scans for a channel automatically and stores inthe gt Ty Channel Type Digital amp Analogue Digital Analogue Select the channel source to memorise English When selecting Cable Digital amp Analogue Digital or Analogue Operator Selection depending on the country Selects a provider of cable services Search Mode Scans for all channels with active broadcast stations and stores them in the TV If you select Quick you can set up the Network Network ID Frequency Modulation and Symbol Rate manually by pressing the button on the remote control Network
11. the ENTERL button Channel scan is started English Satellite System MENU Broadcasting Channel Settings Satellite System ENTERL The PIN input screen appears Enter your 4 digit PIN number Satellite System is available when Aerial is set to Satellite Before running Auto Tuning set Satellite System Then channel scan is run normally Satellite Selection You can choose the satellites for this TV e LNB Power Enables or disables the power supply for the LNB English e LNB Settings Configures the outdoor equipment It is available when LNB Power is set to On Satellite Selects the satellite for receiving digital broadcasts Transponder Selects a transponder from the list or adds a new transponder DiSEqC Mode Selects DiSEqC mode for the selected LNB Lower LNB Oscillators Sets the LNB oscillators to a lower frequency Upper LNB Oscillators Sets the LNB oscillators to a higher frequency Tone 22 kHz Selects the Tone 22 kHz depending on the LNB type Fora universal LNB it should be Auto Signal Quality Display the current status of broadcasting signal English SatCR Unicable Settings Configure single cable installation SatCR is short for satellite channel router This function may not support depending on the country SatCR Unicable Enables or disable single cable installation support e Positioner Settings Configures the aerial positioner It is available when LNB Power is se
12. E MANUAL Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Contents Channel Setting Preference Features Other Information e Using the INFO button Now amp Next guide 1 e Executing initial setup 55 e Viewing the e Manual 87 e Memorizing channels 2 e Setting the Time 56 e Using the Self Diagnosis 88 e Using the Channel menu 6 e Using the Sleep Timer 58 e Updating the Software 90 e Locking Programme 19 e Setting the On Off Timer 59 e Changing the Use Mode 92 e Other Features 21 e Economical Solutions 64 e Viewing the Contact Samsung 93 e Other Features 66 e Using the Sports Mode 94 Basic Features e Using the Satellite System 95 Advanced Features e Using the Wired Network 103 e Changing the Preset Picture Mode 32 e Adjusting Picture Settings 33 e Using the Source List 70 e Changing the Picture Options 40 e Connecting a USB Device 71 e Changing the Preset Sound Mode 46 e Using the Media Contents 77 e Adjusting Sound Settings 47 e Playing the Photos Videos Music 79 e Selecting the Sound Mode 54 L Using the INFO button Now amp Next guide The display identifies the current channel and the status of certain audio video settings The Now amp Next guide shows daily TV programme information for each channel according to the broadcasting time When you press the INFO button a channel information banner will appear
13. Favourites Assign your own favourite channel name Aerial Select the desired broadcasting signal Edit Channel Go to Edit Channel screen directly Information Display details of the selected programme English LI Locking Programme E Programme Rating Lock depending on the country MENU Broadcasting Programme Rating Lock ENTERL4 Prevent unauthorized users such as children from watching unsuitable programme with a user defined 4 digit PIN code If the selected channel is locked the fm symbol will be displayed d The items of Programme Rating Lock differs depending on the country English E Channel Lock MENU Broadcasting Channel Lock ENTERC Lock channels in Channel menu to prevent unauthorized users such as children from watching unsuitable programme Available only when the Source is set to TV English Q Other Features E Channel Settings MENUO Broadcasting Channel Settings ENTERC Country Area depending on the country The PIN input screen appears Enter your 4 digit PIN number Digital Channel Change the country for digital channels Analogue Channel Change the country for analogue channels English Manual Tuning Scans for a channel manually and stores in the TV If a channel is locked the PIN input window appears According to the channel source Manual Tuning may be supported e Digital Channel Tuning Scans for a digital channel manually a
14. ach time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The internet connection may fail because of a firewall problem If this is the case contact your Internet service provider If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider please contact Samsung Electronics English
15. an watch the TV tuner and one external video source simultaneously For example if you have a cable box connected to the Cable In jack you can use PIP to watch programs from the cable box and watch a movie from a Blu ray player attached to the HDMI In jack NOTE if you turn the TV off while watching in PIP mode the PIP window will disappear You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke English PIP settings Component HDMI TV PIP Activate or deactivate the PIP function Aerial Select either Air or Cable as the input source for the sub screen Channel Select the channel for the sub screen Size Select a size for the sub picture Position Select a position for the sub picture Sound Select You can choose the desired sound in PIP mode English L Changing the Picture Options E Advanced Settings MENU Picture Advanced Settings ENTERC available in Standard Movie mode You can adjust the detailed setting for the screen including colour and contrast When connecting a PC you can only make changes to the White Balance and Gamma e Dynamic Contrast Adjust the screen contrast e Black Tone Select the black level to adjust the screen depth Flesh Tone Adjust the flesh tone colour English RGB Only Mode Displays the Red Green and Blue colour for making fine adjustments to the hue and saturation e Colou
16. are complete The TV will be turned off and on automatically after completing the firmware upgrade By Channel Upgrade the software using the broadcasting signal If the function is selected during the software transmission period software will be automatically searched and downloaded The time required to download the software is determined by the signal status e Auto update A manual upgrade will be automatically performed at selected time Since the power of the unit is turned on internally the screen may be turned on slightly for the product This phenomenon may continue for more than 1 hour until the software upgrade is complete English L Changing the Use Mode E Use Mode MENU Support Use Mode ENTERC Select the Use Mode suitable for your place We strongly recommend you select Home Use Home Use Home Use is the default setting e Store Demo Store Demo is for retail environments only If you select Store Demo some functions will not work and the picture settings will be reset gt every 30 minutes English a Viewing the Contact Samsung E Contact Samsung MENU Support Contact Samsung ENTERC View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centres and how to download products and software English L Using the Sports Mode E Sports Mode MENU Applications Sports Mode
17. avourites Set channels you watch frequently as favourites For detailed information about using Edit Favourites refer to Edit Favourites A Favourites 1 5 Shows all favourite channels arranged in up to five groups Each group has a separate screen The TV displays Favourites 1 5 only if you have added favourites using Edit Favourites English All Shows all currently available channels TV Shows all currently available TV channels Radio Shows all currently radio channels Data Other Shows all currently available MHP or other channels Analogue Shows all currently available analogue channels English E Guide MENU Broadcasting Guide ENTER The EPG Electronic Programme Guide information is provided by broadcasters Using programme schedules provided by broadcasters you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time Programme entries may appear blank or out of date depending on a channel status FN Red Quick Nav Viewing the TV programmes on the list quickly using A V lt buttons e J Green Channel Category Select the type of channels you want to display Yellow Schedule Manager Moves to the reserved programmes in Schedule Manager English E Schedule Manager MENUO Broadcasting Schedule Manager ENTERC You can set a desired channel to be displayed automatically a
18. e uses this function Limit Position Selects the direction of the positioner Limit Aerial Position Adjusts and stores the aerial position for the selected satellite Store Current Position Stores the current position as the selected positioner Limit Go to zero Moves the aerial to the reference position Reset positioner limit Allows the aerial to rotate over the full arc Reset all settings All satellite settings will be reset to the initial values gt English LI Using the Wired Network UK only E Wired Network Connection You can attach your TV to your LAN using cable in three ways Connecting the LAN port on your TV to an external modem Connecting the LAN port on your TV to a IP Sharer which is connected to an external modem Connecting the LAN port on your TV directly to a network wall outlet To use this way wall outlet is attached to a modem or router elsewhere in your house gt For detailed settings for wired network connection refer to the User Manual English f your network requires a Dynamic IP address you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values your TV needs to access the Internet so you do not have to enter them manually Most home networks use a Dynamic IP address Some networks require a Static IP address
19. een saver is activated to prevent the formation of ghost images on the screen English E General MENU System General ENTERC e Game Mode When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode NOTE Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu f you display the TV menu in Game Mode the screen shakes slightly e Game Mode is not available in TV mode e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality English e f Game Mode is On Picture Mode is set to Standard and Sound Mode is set to Movie Panel Lock Lock or unlock all the keys on the panel Boot Logo Display Samsung logo when the TV is turned on Change PIN MENUDO System Change PIN gt ENTERC Change your password required to set up the TV The PIN input screen appears before the setup screen Enter your 4 digit PIN Change the PIN using the Change PIN option English E DivX Video On Demand MENU System DivX Video On Demand ENTER C Shows the registration code authorized for the TV If you connect to the Divx web site and register with 10 digit registration code you can download the VOD activation file Once you play it using Videos the registration is comple
20. el list LC Done Completes changing the channel order e E Green Lock Unlock Lock a channel so that the channel cannot be selected and viewed Unlock the channel that you locked This function is available only when the Channel Lock is set to On The PIN input screen appears Enter your 4 digit PIN Change the PIN using the Change PIN option Yellow Delete Deletes a channel from the channel list English D Blue Select All Deselect All Selects or deselects all channels at once Go To Goes to channel directly by pressing numbers 0 9 Page Move to previous or next page a Tools Displays the option menu The option menu items that appear may differ depending on the channel status and type Sorting digital channels only Changes the list ordered by channel number or channel name Aerial Select the desired broadcasting signal English Category Change the channel mode to All TV Radio Data Other Analogue Recently Viewed Most Viewed The selected channel mode is displayed Edit Favourites Go to Edit Favourites screen directly Rename channel analogue channels only Assign a name of up to five characters to a channel For example Food Golf etc This makes it easier to find and select the channel Channel Info Display details of the selected channel Information Display details of the selected programme English E Edit Favourites MENU Broadcasting
21. en wired network connection failed try to apply the following information to each issue No network cable e Check that your network cable is plugged in found e fit is connected make sure that the router is turned on if it is on try turning it off and on again IP auto setting failed Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings e Ensure DHCP server is enabled on router and unplug and re plug in the gt router e Contact your Internet Service Provider for more information English Unable to connect to the network Connected to your local network but cannot connect to the Internet Network setup complete but cannot connect to the Internet Check if your IP address is set correctly in IP Settings Contact your Internet Service Provider for more information Check your Internet LAN cable is connected correctly to LAN port of router Check the DNS settings in IP Settings If the problem persists contact your Internet Service Provider to access the Internet Confirm that your router is connected to the Internet If the problem persists contact your Internet Service Provider to access the Internet English If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates e
22. es on Leave the set top box turned on When you select a source other than TV or USB the Aerial and Channel options will disappear Aerial when the Source is set to TV Select ATV or DTV Channel when the Source is set to TV Select the desired channel English Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically If there is no music file on the USB device or the folder containing a music file is not selected the timer function does not operate correctly When there Is only one photo file in the USB device the slide show will not play lfafolder name is too long the folder cannot be selected Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names English It is recommended that you use a USB memory stick and a multi card reader when using On Timer The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because these devices take a long time to be recognized e Off Timer You can set up three separate Off Timer configurations Off Timer 1 Off Timer 2 Off Timer 3 Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at your convenience If you select Manual you can set up the day yo
23. he TV guides English LI Setting the Time E Time MENU System Time ENTERC The current time will appear every time you press the INFO button Clock Setting the clock is for using various timer features of the TV If you disconnect the power cord you have to set the clock again Clock Mode Set up the current time manually or automatically Auto Set the current time automatically using the time from a digital channel The aerial must be connected in order to set the time automatically Manual Set the current time manually Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually English Clock Set Set the Date and Time Available only when Clock Mode is set to Manual You can set the Date and Time directly by pressing the number buttons on the remote control Time Zone depending on the country Select your time zone This function is only available when the Clock Mode is set to Auto When selecting Manual in Time Zone GMT and DST will be activated Time Offset UK only Adjusts the time when your TV receives the time information via Internet Set the right time by selecting an offset The current time will be set through a network if the TV fails to receive the time information including the broadcast signal from TV stations ex Watching TV via set top box Satellite receiver or etc English A Using the Sleep Timer
24. igh frequency sound to allow a better listening experience for the hearing impaired lf Speaker Select is set to External Soeaker Sound Mode is disabled English A Adjusting Sound Settings E Sound Effect standard sound mode only MENU Sound Sound Effect ENTERC e DTS TruSurround This function provides a virtual 5 1 channel surround sound experience through a pair of soeakers using HRTF Head Related Transfer Function technology e DTS TruDialog This function allows you to increase the intensity of a voice over background music or sound effects so that dialogue can be heard more clearly English Equaliser Use Equaliser to customize sound setting for each speaker Balance Adjusts the balance between the right and left speaker 100Hz 300HZz 1kHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Reset Resets the equaliser to its default settings If Speaker Select is set to External Speaker Sound Effect is disabled English M Speaker Settings MENU Sound Speaker Settings ENTERC Speaker Select A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker When Speaker Select is set to External Speaker the volume and MUTE buttons will not operate and the sound settings will be limited When Speaker Select is set to External Speaker e TV Speaker
25. nd stores in the TV Press the New button to search the digital channels When scanning has finished a channel is updated in the channel list When selecting Aerial Air Channel Frequency Bandwidth When selecting Aerial Cable Frequency Modulation Symbol Rate English e Analogue Channel Tuning Scans for an analogue channel Press the New button to search the channels by adjusting the Programme Colour System Sound System Channel Search Channel mode P programme mode When tuning is complete the broadcasting stations in your area have been assigned to the position numbers from PO to P99 You can select a channel by entering the position number in this mode C aerial channel mode S cable channel mode These two modes allow you to select a channel by entering the assigned gt number for each aerial broadcasting station or cable channel English Fine Tune analogue channels only If the signal is weak or distorted fine tune the channel manually Fine tuned channels are marked with an asterisk To reset the fine tuning select Reset e Transfer Channel List depending on the country Imports or exports the channel map You should connect a USB storage to use this function The PIN number input screen appears Enter your 4 digit PIN number Supported file systems are FAT and NTFS e Delete CAM Operator Profile Selects the CAM operator to delete English E Subtitle
26. on a Game but you cannot play the Game itself e Supported Subtitle Video Formats For the details refer to Specifications in User Manual English Music You can play music files repeatedly Shuffle You can play the music randomly Sound Mode You can adjust the sound setting Only displays the files with supported music file extension Other file extensions are not displayed even if they are saved on the same USB device 4 If the sound Is abnormal when playing music files adjust the Equaliser in the gt Sound menu An over modulated music file may cause a sound problem Supported Music Formats For the details refer to Specifications in User Manual English Setting the Encoding language Set the encoding language if the text is not Supported 1 Press the A button to select Options at the top of music main screen and select Encoding 2 Select the desired encoding language English LI Viewing the e Manual E e Manual MENUDO Support e Manual ENTERC You can read the introduction and instructions about the TV features stored in your TV For the detailed information about e Manual Screen refer to How to use the e Manual in User Manual English L Using the Self Diagnosis E Self Diagnosis MENUDO Support Self Diagnosis ENTERL Self Diagnosis might take few seconds this is part of the normal operation of the TV Picture Test Use to check for picture p
27. on cable is used the USB device may not be recognized or the files on the device may not be read If a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection If a file deleted from the PC is still found when Media Contents is run use the Empty the Recycle Bin function on the PC to permanently delete the file If the number of files and folders saved on a USB storage device is gt approximately over 4000 the files and folders may not appear and some folders may not be opened English Disconnecting a USB Device 1 Press the SOURCE button 2 Select a desired USB device and then press the TOOLS button The Tools menu appears 3 Select Disconnect USB Device and then wait until the selected USB device is disconnected You can remove a USB device from the TV To remove a USB device from the TV we recommend use Disconnect USB Device function English LJ Using the Media Contents MENU Applications gt Media Play ENTERC Enjoy photos music and movie files saved on a USB Mass Storage Class MSC device 1 Press the MEDIA P button 2 Press lt gt button to select desired menu Photos Videos Music then press the ENTERL4 button 3 Press lt P gt button to select desired device then press the ENTERL button gt again 4 Press the A W l
28. ong with the Main audio from the broadcaster Audio Description Turn the audio description function on or off Volume Adjust the audio description volume English E Teletext Language depending on the country MENUO Broadcasting Teletext Language ENTERL Teletext Language English is the default in cases where the selected language Is unavailable in the broadcast Primary Teletext Secondary Teletext Primary Teletext and Secondary Teletext may not be supported in some locations English E Digital Text UK only MENUDO Broadcasting Digital Text ENTERC If the programme broadcasts with digital text this feature is enabled MHEG Multimedia and Hypermedia Information Coding Experts Group An International standard for data encoding systems used in multimedia and hypermedia This is at a higher level than the MPEG system which includes data linking hypermedia such as still images character service animation graphic and video files as well as multimedia data MHEG is user runtime interaction technology and is being applied to various fields including VOD Video On Demand ITV Interactive TV EC Electronic Commerce tele education teleconferencing digital libraries and network games gt English E Common Interface MENU Broadcasting Common Interface ENTERC e CI Menu This enables the user to select from the CAM provided menu Select the Cl Menu based on the menu
29. options for picture quality control NOTE n analogue TV Ext AV modes of the PAL system the Tint G R function is not available e When connecting a PC you can only make changes to Backlight Contrast Brightness and Sharpness e Settings can be adjusted and stored for each external device connected gt to the TV Lowering picture brightness reduces power consumption English M Picture Size MENU Picture Picture Size ENTERC Set the various picture options such as picture size and aspect ratio The available items may differ depending on the selected mode Depending on the input source the picture size options may vary e Picture Size Ga Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time Auto Wide Automatically adjusts the picture size to the 16 9 aspect ratio 16 9 Sets the picture to 16 9 wide mode Wide Zoom Magnifies the picture size more than 4 3 Adjusts the Position by using A W buttons English Zoom Magnifies the 16 9 wide pictures vertically to fit the screen size Adjusts the Zoom or Position by using A V button 4 3 Sets the picture to basic 4 3 mode Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and centre of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image with
30. ou can see detailed information about the played file Slideshow Settings You can set the Speed and Effects during the slide show English During the slide show all files in the file list will be displayed in order When you press the gt Play button or A button Options Slide Show in the file list slide show will be started immediately During the slide show you can adjust the slide show speed using lt lt REV or gt gt FF button e Supported Photo Formats For the details refer to Specifications in User Manual English Videos Q Search Search Titles You can move the other file directly Search Time Bar You can search the video using lt and gt button at one minute interval or entering the number directly It may not be supported depending on the input source Repeat Mode You can play movie files repeatedly You can adjust the picture size to your preference Settings Subtitle Settings You can play the video with subtitles This function d only works if the subtitles are the same file name as the video Picture Mode Sound Mode You can adjust the picture or sound setting Audio Language You can change the audio language if the video has more than one language Information You can see detailed information about the played file English If video time information is unknown play time and progress bar are not displayed In this mode you can enjoy movie clips contained
31. out any cut off when HDMI 720p 1080 1080p or Component 1080 1080p signals are inputted English Smart View 1 CHEESES Reduces original screen by 50 Smart View 2 GED ERASE Reduces original screen by 25 NOTE e Smart View 1 is enabled only in HDMI mode e Smart View 2 is enabled only in DTV and HDMI modes The picture size can vary depending on the input resolution when content is played using Videos under Media Play Zoom Position Adjust the picture size and position It is only available in Zoom Position Adjust the picture position It is only available in Screen Fit or Wide Zoom English NOTE e After selecting Screen Fit in HDMI 1080i 1080p or Component 1080 1080p mode you may need to centre the picture 1 Select the Position Press the ENTERCL button 2 Press the A V lt or gt button to move the picture f you want to reset the position you adjusted select Reset in the Position screen The picture will be set to its default position e lf you use the Screen Fit function with HDMI 720p input 1 line will be cut at the top bottom left and right as in the overscan function lt e 4 3 Screen Size Available only when picture size is set to Auto Wide You gt can determine the desired picture size at the 4 3 WSS Wide Screen Service size or the original size Each European country requires different picture size English E PIP MENU Picture PIP ENTERC You c
32. r Space Adjust the range of colours available to create the image White Balance Adjust the colour temperature for a more natural picture R Offset G Offset B Offset Adjust each colour s red green blue darkness R Gain G Gain B Gain Adjust each colour s red green blue brightness Reset Resets the White Balance to its default settings Gamma Adjust the primary colour intensity gt Motion Lighting Reduce power consumption by brightness control adapted motion Only available in Standard mode When changing a setting value of Backlight Brightness or Contrast Motion Lighting will be set to Off English E Picture Options MENU Picture Picture Options ENTERC When connecting a PC you can only make changes to the Colour Tone e Colour Tone Warm1 or Warm2 will be deactivated when the picture mode is Dynamic Settings can be adjusted and stored for each external device connected to an input on the TV English e Digital Clean View If the broadcast signal received by your TV is weak you can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen When the signal is weak try other options until the best picture is displayed Auto Visualisation When changing analogue channels displays signal strength Only available for analogue channels When the INFO button is pressed the signal strength bar is displayed When bar is green you a
33. re receiving the best possible signal e MPEG Noise Filter Reduces MPEG noise to provide improved picture quality English e HDMI Black Level Selects the black level on the screen to adjust the screen depth Available only in HDMI mode RGB signals e Film Mode Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality Available in TV mode and external inout mode which supports SD 480i 576i and HD 1080 except in PC mode If the screen does not seem natural change its option to Off Auto Auto2 in Film Mode e LED Clear Motion Removes drag from fast scenes with a lot of movement gt to provide a clear picture It will be deactivated when the picture mode is set to Natural The screen may become slightly darker when you play LED Clear Motion English WE Picture Off MENU Picture Picture Off ENTERC The screen is turned off but the sound remains on Press any button except volume button to turn on the screen E Reset Picture MENU Picture Reset Picture ENTERCL Resets your current picture mode to its default settings English L Changing the Preset Sound Mode E Sound Mode MENU Sound Sound Mode ENTERC e Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of h
34. revent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss The HDD Hard Disk Drive connected to USB is not supported Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen e The maximum supported JPEG resolution is 15360 x 8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed The scene search and thumbnail functions are not supported in the Videos English MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements PIP connection mode is fully available only with digital cameras When connecting a smartphone or tablet to the TV using PIP mode it may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported If the TV has been no input during time set in Auto Protection Time the screen saver will run English The power saving mode of some external hard disk drives may be released automatically when connected to the TV If a USB extensi
35. roblems e Sound Test Use the built in melody sound to check for sound problems If you hear no sound from the TV s speakers before performing the sound test make sure Speaker Select is set to TV Speaker in the Sound menu The melody will be heard during the test even if Soeaker Select is set to External Speaker or the sound is muted by pressing the MUTE button English Signal Information digital channels only HDTV channel s reception quality is either perfect or the channels are unavailable Adjust your aerial to increase signal strength e Reset Reset all settings to the factory defaults except network settings The PIN input screen appears before the setup screen Enter your 4 digit PIN Change the PIN using the Change PIN option English LJ Updating the Software E Software Update MENUM Support Software Update ENTERC The Software Update menu lets you upgrade your TV s software to the latest version Current version This is the software version already installed in the TV When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings So that you can easily reset them after the upgrade English e Update now By USB Insert a USB drive containing the firmware upgrade file downloaded from www samsung com into the TV Please be careful not to disconnect the power or remove the USB drive until upgrades
36. t 4 gt button to select the desired file in the list then press the ENTERL button or gt Play button English Playing the selected files 1 Press the A button to select Options at the top of each main screen and select Play Selected 2 Select the desired files The check box appears to the left of the selected files Press ENTERL button again to deselect the file 3 Press the A button to select Play You can select or deselect all files pressing the Select All Deselect All gt English m Playing the Photos Videos Music During playing a file press the A W lt b button to select the desired menu L When the option menu is not displayed press the TOOLS button or ENTERL4 button Z You can also use gt m 44 gt gt buttons on the remote control during playback Z Ifyou press the INFO button during playback you can view the playback information English Playback menu fF wno e Start Slide Show Stop Slide Show pe A When setting the Background Music to Mini Player in Photos these buttons appear English Setting menu Photos You can zoom into images in full screen mode Rotate You can rotate images in full screen mode Background Music You can set background music when watching a slide show Mini Player You can control simple playback menus Ej Settings Picture Mode Sound Mode You can adjust the picture or gt sound setting Information Y
37. t the intended time In addition you can view modify or delete a channel you have reserved to watch You must set the current time first using the Time Clock function in the System menu to use this function 1 Press the Schedule on the Schedule Manager screen The Schedule Viewing menu appears 2 Press the A W lt b buttons to set each option menu e Aerial Select the desired broadcasting signal Channel Select the desired channel English Repeat Select Once Manual Sat Sun Mon Fri or Everyday to set at your convenience If you select Manual you can set the day you want The YW mark indicates the day you ve selected Date You can set the desired date It is available when you select Once in Repeat e Start Time You can set the start time you want If you want to edit or cancel a reserved schedule select the reserved schedule on Schedule Manager Then press the ENTERL button and select the Edit or Delete English E Edit Channel MENU Broadcasting Edit Channel ENTERC You can edit or delete channels 1 Go to Edit Channel screen 2 Press the A buttons to select the desired channel then press the ENTERL button The v mark indicates the channel you ve selected You can select more than one channel Press the ENTERL again to deselect the channel English Using the coloured and function buttons with the Edit Channel EY Red Change Number Changes channel order on the chann
38. t to On Positioner Enables or disables the positioned control Positioner Type Sets the positioned type between DiSEqC 1 2 and USALS Universal Satellite Automatic Location System My Longitude Sets the longitude for my location My Latitude Sets the latitude for my location Satellite Longitude Settings Sets the longitude of user defined satellites English User Mode Sets the position of satellite aerial according to each satellite If you store the current position of satellite aerial according to a certain satellite when the signal of that satellite is needed the satellite aerial can be moved to pre populated position Satellite Selects the satellite to set the position for Transponder Selects a transponder from the list for signal reception Moving Mode Selects the movement mode between discrete and continuous movement Step Size Adjusts the step size degrees for the aerial rotation It is available when Moving Mode is set to Step p English Go To Stored Position Rotates the aerial to the stored satellite position Aerial Position Adjusts and stores the aerial position for the selected satellite Store Current Position Stores current position as the selected positioner limit Signal Quality Display the current status of broadcasting signal English Installer Mode Sets limits to the scope of movement of satellite aerial or reset the position Generally installation guid
39. ted For more information on DivX VOD visit http vod divx com English A LI Using the Source List E Source List Se CS fs MENUO Applications Source List ENTERC When you press the SOURCE button Source screen will be displayed at once You can only choose external devices that are connected to the TV In Source connected inputs are highlighted For the detailed information refer to Changing the Input Source in User Manual English LI Connecting a USB Device 1 Turn on your TV 2 Connect a USB device containing photo music and movie files to the USB port on the side of the TV 3 When USB is connected to the TV popup window appears You can select the Photos Videos or Music directly English It might not work properly with unlicenced multimedia files Need to Know List before using Media Contents MTP Media Transfer Protocol is not Supported Supported file systems are FAT and NTFS Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Contents only supports sequential joeg format Media Contents only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers USB HUB are not supported Devices should be connected directly to the TV s USB port English Before connecting your device to the TV please back up your files to p
40. u want to activate the timer gt The YW mark indicates the day you ve selected Time Set the hour and minute English OQ Economical Solutions M Eco Solution MENU System Eco Solution ENTERC e Energy Saving This adjusts the brightness of the TV in order to reduce power consumption e Eco Sensor CHEERS To enhance your power savings the picture settings will automatically adapt to the light in the room If you adjust the Backlight the Eco Sensor will be set to Off Min Backlight When Eco Sensor is On the minimum screen brightness can be adjusted manually If Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light intensity gt English e No Signal Power Off To avoid unnecessary energy consumption set how long you want the TV to remain on if it s not receiving a signal Disabled when the PC is in power saving mode e Auto Power Off The TV will be automatically turned off when no user operation is received for 4 hours If the Auto Power Off option is set to Off the TV will stay on even if no operations are performed on the TV English Q Other Features E Menu Language MENUDO System Menu Language ENTERC Set the menu language WE Auto Protection Time MENU System Auto Protection Time ENTERC q e lf the screen remains idle with a still image for a certain period of time defined by the user the scr
Download Pdf Manuals
Related Search