Metra 99-8902 mounting kit
Contents
1. CTRONICS CORPORATION INST99 89022. H DISASSEMBLY OLDE SUBARU IMPREZA 20086 11 FORESTER 2009 11 1 Disconnect the negative battery ter minal to prevent an accidental short circuit 2 Unclip and remove the trim panel surrounding the factory radio includ ing the a c vents Figure A 3 Remove 4 Phillips screws securing the radio Unplug and remove the radio Figure B Continue to kit assembly MO 99 8902 KIT ASSEMBLY DIN RADIO PROVISION WITH POCKET Note Refer also to the instructions included with the aftermarket radio 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward Figure A 2 Slide the aftermarket radio into the cage until it snaps into place Figure B Continue to final assembly i MCE 99 8902 KIT ASSEMBLY ISO MOUNT RADIO PROVISION WITH POCKET Note Refer also to the instructions included with the aftermarket radio 1 Mount the ISO Brackets to the radio using the screws supplied with the radio Figure A 2 Slide the radio into the radio housing until it snaps into place Figure B 3 Snap the Trim plate onto the front of the Radio Housing Figure B Continue to final assembly 1 F ec eC Oze 39 8902 FINAL ASSEMBLY FINAL ASSEMBLY A Strip wire ends back 1 2 B Twist ends together G Solder D Tape Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter and maki
3. INSTALLATION INSTRUCTIONS FOR PART 99 8902 APPLICATIONS SUBARU Impreza 2008 2011 Forester 2009 11 KIT FEATURES e DIN Radio Provision with Pocket e ISO Mount Radio Provision with Pocket KIT COMPONENTS WIRING AND ANTENNA CONNECTIONS Sold Separately Wire harness e 70 7552 Nissan harness 2007 up e 70 8901 Subaru harness 1990 up Antenna adapter e 40 SB10 Subaru antenna adapter 2005 up TOOLS REQUIRED Small Flat Blade Screwdriver Panel Removal Tool e Phillips Screwdriver O 1 800 221 0932 J www metraonline com COPYRIGHT 2008 2010 METRA ELECTRONICS CORPORATION gt I TABLE OF CONTENTS Dash Disassembly SUBARU Impreza 2008 2011 1 1 SUBARU Forester 2009 2011 cc lt c lt cc 0100000000000 1 Kit Assembly DIN Radio Provision with Pocket lt lt c lt c lt cc 000000000 2 ISO Mount Radio Provision with Pocket lt lt ccccc 000000000 3 Final Assembly sinn Note Refer also to the instructions included with the aftermarket radio MRM KNOWLEDGE IS POWER ae i Enhance your installation and fabrication skills by p enrolling in the most recognized and respected mobile electronics school in our industry Log onto www installerinstitute com or call ty 800 354 6782 for more information and take steps toward a better tomorrow X Metra reccommends MECP KON certified technicians F FE A 39 8902 DAS
4. ng connections as shown Isolate and individ ually tape off the ends of any unused wires to prevent electrical short circuit Re connect the negative battery terminal and test the unit for proper operation Reassemble radio and dash assemblies in reverse order of disassembly FINAL WIRING CONNECTIONS Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit Metra recommends making connections as shown below Strip Splice Solder Tape Isolate and individually tape off ends of any unused wires to prevent electrical short circuit METRA EIA WIRING CODE 12V Ignition Acc Red Right Front Gray 12 Batt Memory Yellow Right Front Gray Black MO aaa d zvo bo Black Left Front White Power Antenna Blue Left Front White Black Amp Turn On Blue White Right Rear Violet Amp Ground Black White Right Rear Violet Black Illumination Orange Left Rear Green Dimmer 2 Orange White NOTE When a Black wire is not present ground radio to vehicle chassis All colors may not be present on all leads due to manufacturer s specifications 4 EU MOT S 998908 o NOTES 99 890e INSTRUCTIONS a 1 800 221 0932 www metraonline com REV 11 18 10 COPYRIGHT 2008 2010 METRA ELE
Download Pdf Manuals
Related Search