Altec Lansing moondance GLOW
Contents
1. ALTEL LANSING Altec Lansing Moondance Glow Digital Speaker System and Alarm Clock for iPod M402SR User Guide Gu a del usuario Guide d utilisation Guia do Usu rio Welcome Thank you for purchasing the Altec Lansing Moondance Glow speaker system Designed specifically to work with your iPod this system provides high quality audio and radio performance that brings out the best in your music This Altec Lansing speaker system is designed to work with e iPod touch 2nd generation iPod nano 2nd generation iPod touch 1st generation iPod nano 1st generation iPod classic iPod with color display iPod with video iPod mini iPod nano 4th generation iPod with Click Wheel iPod nano 3rd generation Please carefully read this User Guide for instructions on setting up and using your Moondance Glow speaker system Prior to installing or operating the Altec Lansing Moondance Glow speaker system refer to the end of this guide for important product safety information Getting Assistance The answers to most setup and performance questions can be found in the Troubleshooting section of this guide You can also consult the frequently asked questions FAQ in the customer support section of our Web site at www alteclansing com If you live in North America and still can t find the information you need please call our customer service team for assistance before returning this product to your retailer under the2. been turned off Note Use the P1 button on some older iPod models Functionality may vary per iPod model Access the previous playlist Press the P3 button on the enhanced remote Access the next playlist Press the P4 button on the enhanced remote Charging Your iPod Whenever your iPod is docked and your Altec Lansing Moondance Glow speaker system is plugged into an AC outlet your iPod is charging until fully charged even if the speaker system is switched off Listening to the FM Radio 1 Plug the FM radio antenna into the speaker system s FM ANTENNA jack The jack is located on the back of the System 2 Extend the FM antenna wire fully for best FM reception Also do not strip alter or attach to other antennas S Select FM mode Press the remote until the button on your speaker system or enhanced tH appears on the LCD 4 Tune to the station you want to listen to Use the and buttons on your speaker system or enhanced remote to tune in the desired station Press and hold these same buttons to find the next clear FM station 5 Adjust the volume Use the and buttons on the Altec Lansing speaker system to adjust the system volume Or use the and buttons on the enhanced remote How to Store Preset Stations Your Altec Lansing speaker system s enhanced remote enables you to program up to 4 FM station presets 1 Tune to the station you wish to store While in
3. FM mode use the and k buttons on your speaker System or enhanced remote to tune to the desired station 2 Store the station Press and hold the P1 P2 P3 or P4 button on the enhanced remote for a few seconds You can store one FM station in each preset S Tostore other stations repeat the above steps How to Recall Preset Stations 1 Make sure you are in FM mode If you re not in FM mode press the button on your speaker system or enhanced remote until the FT appears on the LCD 2 Press a PRESET button P1 P2 P3 or P4 on the enhanced remote The radio will tune to your preset station 3 Adjust the volume Use the and buttons on the Altec Lansing speaker system to adjust the system volume Or use the and buttons on the enhanced remote 13 Listening to a Non docking iPod or Other Portable Audio Device If you have a non iPod MP3 player or other non docking portable audio 7 When you are finished listening to your portable audio device device you can enjoy it through your Altec Lansing Moondance Glow please remember to turn both it and your speaker system off speaker system as well Just connect it via the AUX jack Here s how to conserve electricity 1 Locate a 3 5 mm stereo cable not included 2 Plug one end of the stereo cable into your device Your device should have either a headphone or LINE OUT jack for you to plug into 3 Plug the other end of the stereo cable into your sp
4. Set Alarm 2 Repeat the above steps substituting How to Use the Snooze Feature Press the SNOOZE button once to silence the alarm for a period of 5 to 60 minutes user definable 19 20 Setting the Sleep Timer Your Altec Lansing speaker system is equipped with a sleep timer that automatically turns off the unit 5 to 90 minutes after it has been set How to Set the Sleep Timer 1 2 3 5 Turn on the speaker system Ensure that your selected audio source is playing Press and hold the POWER button for 3 seconds This puts you in the Sleep Timer mode Choose when you want the speaker system to turn off Press the iii or i button on your speaker system or the enhanced remote to select how long the unit should play before going on standby in 5 minute increments Press the POWER button again This takes you out of the Sleep Timer mode NOTE Turning off the system will cancel the Sleep Timer Maintaining Your Speaker System Place your speaker system on a level surface away from sources of direct sunlight or excessive heat Protect your furniture with a cloth or other protective material when placing your speaker system on a natural wood or lacquered finish Clean your speaker system with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit Troubleshooting Symptom Possible Problem Sol
5. button on your iPod speaker system enhanced remote or wireless snooze remote Music from your iPod will start playing The speaker system and its remote are capable of controlling basic functions of your iPod 4 Adjust the volume Use the and buttons on the Altec Lansing speaker system to adjust the system volume Or use the and buttons on the enhanced remote 5 Find your desired song Press the or ii button on your speaker system or enhanced remote to go to the next or previous track Press and hold the 4 or 1 button on your speaker system or enhanced remote while track is playing for high speed forward or reverse music search of the current track How to Access Additional Features on Your iPod Using the Enhanced Remote Shuffle function Press the P1 button once on the enhanced remote to advance to the next shuffle mode The es icon is displayed when the system is in song shuffle mode The gt lt a icon is displayed when the system is in album shuffle mode The icon disappears when the shuffle function has been turned off Note Use the P2 button on some older iPod models Functionality may vary per iPod model Repeat function Press the P2 button once on the enhanced remote to advance to the next repeat mode The 1 icon is displayed when the system is in the repeat one mode The e icon is displayed when the System is the repeat all mode The icon disappears when the repeat function has
6. for more information Set the alarm See the Setting the Alarm section for instructions on setting the alarms Dismiss the alarm Press the i button when the alarm is sounding Snooze for 5 to 60 minutes user definable Press the button when the alarm is sounding See the Setting the Alarm section to learn how to set the snooze duration NOTE For best results aim the enhanced remote toward the Moondance Glow speaker system The wireless snooze remote lets you operate select functions of your Altec Lansing Moondance Glow speaker system from across the room There s no need to aim it at the speaker system Press the button to activate the Snooze snooze timer n iPod mode press the button sb See the Listening to Your iPod section for more your iPod information Pause your iPod n iPod mode press the ii button Press the button when the alarm is Dismiss the alarm sounding NOTE See the Using the Wireless Snooze Remote section for installation and pairing instructions Using the Wireless Snooze Remote The Moondance Glow speaker system comes with a wireless snooze remote that allows you to snooze and dismiss your alarm and play pause your iPod from across the room up to 30 feet 10 meters away In order for the wireless snooze remote to control the speaker system the snooze remote receiver must be connected to the back of the speaker sys
7. of the lit and the alarm will not function but the current time will be temporarily system maintained Otherwise you must reset the time and alarm settings 2 Plug the AC adapter into the wall outlet 1 Make sure the AC adapter is connected How to Install the Enhanced Remote Battery Your settings may be lost during battery installation if the AC adapter isn t connected The enhanced remote battery included is not installed at the factory To install the battery follow the steps below 2 Open the battery compartment 1 Pull out the battery holder cover we The compartment cover is located on The battery door is located on the QOS the bottom of the system lower end of the remote Simply pull SK Jj E O the tab to open the battery holder Ss J 3 Insert one 9 volt battery not included x Uy 2 Position the battery included so it Y Be sure to check that the polarity and ends of the batteries sits in the battery holder correctly matches the illustration inside the battery compartment Altec Lansing recommends the use of alkaline batteries for longer life Make sure the polarity the and sides of the battery is correct 4 Close the battery compartment cover S Replace the battery door NOTE Please discard used batteries properly Placing and Removing Adapters for the iPod Your Altec Lansing Moondance Glow speaker system includes removable adapters for today
8. s popular iPod models These adapters ensure that your iPod properly fits in the speaker system s dock As new iPod models are introduced new adapters will be made available to customers You may also use the adapters supplied with your iPod or available for purchase at www apple com How to Place an Adapter 1 Select the correct adapter for your iPod Using the correct adapter ensures a proper fit for your iPod 2 Gently press the iPod adapter into the dock Now you can carefully place your iPod into the dock NOTE Your iPod cannot be in a case or a skin How to Remove an Adapter 1 Remove your iPod 2 Grip the adapter and pull gently upward Speaker Features and Indicators Alarm 2 button Alarm 1 button Track forward button Track back button Volume increase button Snooze remote jack Play snooze pause button Clock button Volume decrease button Mood light button Source button LCD display AUX jack AC adapter jack Battery compartment FM antenna Universal docking station for iPod Speaker Controls Turn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall See the Getting Started section for more information Press the button Turn off your speaker system Press the D button Whenever you are finished using your speaker system please remember to turn it and
9. A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for the replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Do not install in an area that impedes the access to the power plug Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution To prevent the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel 13 14 15 16 17 18 Safety Information The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Power source Use only power supplies of the type specified in the operating instructions or as marked on the appliance If a separate power supply is included with this apparatus do not substitute with any other power supply use only manufacturer provided power supplies Unplug this apparatus during light
10. M Press the 41 or 1 button on your speaker system or the enhanced remote to select AM or PM Press the CLOCK button to save this setting and enter the Day Set mode Pb waa de CET MA FE a ih E rii dd Hi Ab ClackzHext Set the day Press the iti or i button on your speaker system or the enhanced remote to select the day of the week Then press the CLOCK button to save this setting and enter the Month Set mode EnEn p EURSERE E STE Clock Hext 10 Set the month Use the te and 1 buttons on your speaker system or the enhanced remote to select the month Press the CLOCK button to save this setting and enter the Date Set mode a A RE TEM LU DS i ILI June Clock Set the date Use the te and i buttons on your speaker system or the enhanced remote to select the date Press the CLOCK button to save this setting and enter the Year Set mode Set the year Use the te and i buttons on your speaker system or the enhanced remote to select the year Then press the CLOCK button to save this setting and enter the Display Option mode CLOCK SET YE a Set your display options Press the t or button on your speaker system or the enhanced remote to select one of the following four display options Setting the Clock Display Song Information If song information is available on your iPod or from Date your radio station it is displayed If no song information is available only th
11. Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state Please note that in the European Union you as a consumer might have other legal rights under national legislation of European Union Member States governing the sale of Altec Lansing s goods Those rights are not affected by this guarantee The above limited warranties and remedies are sole warranties and remedies available to purchaser if and to the extent valid and enforceable under the applicable law DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste uni handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office or your household waste disposal service 25 ALTEL LANSING www alteclansing com HEADQUARTERS 535 Rte 6 amp 209 Milford PA 18337 0277 800 ALTEC 88 570 296 4434 Fax 570 296 6887 EUROPE 13 Rue Beaumont L 1219 Luxembourg Luxembou
12. Symptom Possible Problem Solution Wireless snooze remote doesn t work Battery is weak Replace current battery with a new battery Snooze remote receiver is not properly plugged into speaker system See How to Connect and Pair the Wireless Snooze Remote section Wireless snooze remote is not paired See How to Connect and Pair the Wireless Snooze Remote section 23 24 Warranty ALTEC LANSING ONE YEAR LIMITED WARRANTY What Does the Warranty Cover Altec Lansing warrants that its products shall be free from defects in materials or workmanship with the exceptions stated below What Is the Period of Coverage This warranty runs for one year from the date of purchase The term of any warranties implied by law shall expire when your limited warranty expires Some states and or Member States in the European Union do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you What Does the Warranty Not Cover This warranty does not cover any defect malfunction or failure that occurs as a result of improper installation misuse or failure to follow the product directions abuse or use with improper unintended or faulty equipment For information on proper installation operation and use consult the manual supplied with the product If you require a replacement manual you may download a manual from www alteclansing com Also consequential and incidental damag
13. e ALMA SET MINUTE Alarm Hext 5 Select AM or PM Use the t and 1 buttons on your speaker system or the enhanced remote to select AM or PM Then press th button to save this setting and enter the Alarm Day Select mode ALM 1 SET AM PM RHlarmzsHext CREIS NOTE This option is only available if the 12 hour mode was selected when setting up the clock 6 Select alarm day setting Use the and i buttons on your speaker system or the enhanced remote to select the alarm day Choose EVERYDAY to have the alarm go off every day Choose WEEKDAYS to have the alarm go off Monday through Friday Choose WEEKENDS to have the alarm go off on Saturday and Sunday Choose ONE TIME to have the alarm go off only once at the next selected time Then press the ff 1 button to save this setting and enter the Alarm Source Set mode ALM 1 SET DAYS A Era Car Alarm Hexct 7 Set the alarm source Press the tti or button on your speaker system or the enhanced remote to select the alarm source iPod FM radio or buzzer Then press the button to save this setting and enter the Snooze Duration Set mode NOTE If you wish to wake up to a specific song on your iPod dock your iPod on the speaker system select the song on your iPod and then select iPod as your alarm source The speaker system should remember which song was selected from now on unless the playlist on your iPod is modified If the pla
14. e Problem Solution iPod didn t charge iPod is not installed properly Remove your iPod from the dock and check for obstructions on the connectors in the dock and on your iPod Then reseat it in the dock iPod is locked up Please make sure your iPod is working properly before docking into the unit Please refer to your iPod manual for details AC adapter isn t plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector into the supply jack on the speaker system Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted If the iPod original sound source MP3 is of poor quality distortion and noise are easily noticed with high power speakers Try a different audio source such as a music CD Enhanced remote doesn t Work Battery is weak Replace current battery with a new battery Enhanced remote is not pointed toward the speaker system Point the enhanced remote toward the Altec Lansing speaker system and move within 10 feet of the unit No sound from the AUX device such as an MP3 player or CD player connected to the AUX jack Volume on the device is set too low Increase the volume on the device to approximately full volume Source selector is not set to AUX Set source selector to AUX Troubleshooting
15. e date is displayed Song Information Only the song information is displayed if available Date Only the date is displayed Clock Only the clock is displayed NOTE The clock is always displayed The size of the clock is dependent on the display option 11 Set the LCD backlight Press the et or 1 button on your speaker system or the enhanced remote to cycle through LCD backlight options off low medium or high NOTE You can also adjust the display contrast by pressing the CLOCK button one step at a time 17 18 Setting the Alarm Your Altec Lansing speaker system has two separate alarms How to Set Alarm 1 1 Press and hold the This puts you in the Alarm Set mode for alarm 1 i button for 3 seconds 2 TurnAlarm 1 on off Use the te and 1 buttons on your speaker system or the enhanced remote to select alarm ON Then press the button to save this setting and enter the Alarm Hour Set mode ALT SET ONZAOFF LH dust Al NOTE If you select alarm OFF you will exit the menu S Adjust the hour Use the te and i buttons on your speaker system or the enhanced remote to adjust the hour setting Then press the button to save this setting and enter the AM PM selection mode 4 Adjust the minute Use the ti and amp buttons on your speaker system or the enhanced remote to adjust the minute setting Then press the button to save this setting and enter the Alarm Source Set mod
16. e tan ied amp EFL AS ERA RAPERE ERRARE 9 Wireless Snooze Remote Features M HR 11 bistenirig to YOUN IPOGL imei nie e E erede sid E pi MM IET 12 Charging your iPod 219 Ai sasea a a ne enr beider aatis iri ILI LM LL LLL MINI LIII LIP II LEE 13 Listening to a Non docking iPod or Other Portable Audio Device ss 14 Mood Light 2215 Setting the Clock DISplAy 5 tisse oo dd a td 16 SOLO TMS AAI Ss io o o pio aia 18 Setting the Sleep Timer 20 Maintaining Your LOA Ag anse FR ERE EAS ERCE ssiendaneenacessscapateasersesteasuasnsscesatnizeees 20 MPOUDIOSIMOOTING cuca tala DL 21 Warranty Package Contents Altec Lansing Moondance Glow speaker system User Guide and Quick Connect Instructions Miscellaneous adapters for iPod Wireless snooze remote O ce L gt L Snooze remote receiver Power supply Getting Started How to Install the Backup Battery How to Install the AC Adapter This Altec Lansing Moondance Glow speaker system uses a backup battery 1 Connect the AC adapter cable plug system to provide continuous clock settings in the event of a power failure into the speaker system s jack With the backup battery not included installed if a power failure occurs or the AC cord is accidentally disconnected the display will not remain The jack is located on the back
17. e through the available brightness settings When the desired brightness setting is achieved press the button to exit the Mood Light Setup menu Hob E lI uar d WARNING The mood light isn t a reading light and doesn t provide enough light to read by Please don t risk damage to your eyesight by trying to read using the mood light 15 16 Setting the Clock Display How to Set the Clock Time and Date 1 Press and hold the CLOCK button for 3 seconds The CLOCK button is located on the back of your Altec Lansing speaker system This puts you in the Time Date Set mode Select either 12 Hour or 24 Hour Clock mode Press the tt or it button on your speaker system or the enhanced remote to select either 12 Hour or 24 Hour Clock mode Then press the CLOCK button to save this setting and enter the Hour Set mode Set the hour Use the te and i buttons on your speaker system or the enhanced remote to adjust the hour Then press the CLOCK button to save this setting and enter the Minute Set mode 5 Set the minute Use the te and 1 buttons on your speaker system or the enhanced remote to adjust the minute Then press the CLOCK button to save this setting and enter the AM PM Set mode if 12 Hour Clock mode was previously selected If 24 Hour Clock mode was selected pressing the CLOCK button will save the minute setting and place the unit into Day Set mode EAT ET AE VUE A E AL TE Clock xi Set AM P
18. eaker system s AUX jack The AUX jack is located on the back of the unit 4 Select AUX mode Press the button on your speaker system or the enhanced remote until the AUX icon appears on the speaker system s LCD 5 Turon your device and start it playing 6 Adjust the volume Use the and buttons on the speaker system to adjust the volume Or use the and buttons on the enhanced remote NOTE You may need to adjust the device volume also Your device s volume should be set to approximately 4 volume 14 Your Altec Lansing Moondance Glow speaker system is also equipped with a mood light to help you relax and enjoy the music How to Turn On the Mood Light Press the button on your Altec Lansing speaker system How to Adjust the Mood Light You can enter the Mood Light Setup menu at any time to change colors adjust modes and set the brightness level 1 Press and hold the i button for 3 seconds This puts you in the Mood Light Setup menu A C COL COR Mood Light Choose the color of the ambient light you d like Use the te and 1 buttons on your speaker system or the enhanced remote to cycle through all the colors the mood light can emit When the desired color is projected press the button again to enter the Mood Light Manual Select menu Select brightness level Optional setting If in manual mode press the or button on your speaker system or the enhanced remote to cycl
19. electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture IMPORTANT SAFETY INSTRUCTIONS As Keep these instructions anon o 11 12 Read these instructions Heed all warnings Follow all instructions Do not use this apparatus near water This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions The apparatus should not be situated on a bed sofa rug or similar surface that may block the ventilation openings The apparatus must not be placed in a built in installation such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings Ventilation should not be impeded by covering the openings with items such as newspapers tablecloths curtains etc Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat No naked flame sources such as lighted candles should be placed on the apparatus Do not defeat the safety purpose of the polarized or grounding type plug
20. es are not recoverable under this warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you What Will Altec Lansing Do to Correct the Problem Altec Lansing will at its option repair or replace any product that proves to be defective in material or workmanship If your product is no longer being manufactured or is out of stock at its option Altec Lansing may replace your product with a similar or better Altec Lansing product How to Get Warranty Service To get a covered product repaired or replaced you must contact Altec Lansing during the warranty period by email csupport alteclansing com You must include in your email your name address email address telephone number date of purchase and a complete description of the problem you are experiencing In the United States you may alternatively contact Altec Lansing by telephone at 1 800 ALTEC88 please be prepared to provide the same information If the problem appears to be related to a defect in material or workmanship Altec Lansing will provide you a return authorization and instructions for return shipment Return shipments shall be at the customer s expense and the return must be accompanied by the original proof of purchase You should insure the shipment as appropriate because you are responsible for the product until it arrives at Altec Lansing How Will State Law Affect Your
21. information Set the clock See the Setting the Clock Display section for detailed instructions on setting the clock Set the alarm See the Setting the Alarm section for instructions on setting the alarms Dismiss the alarm Snooze for 5 to 60 minutes user definable Press and hold the button for a few seconds when the alarm is sounding or has been snoozed Press the i button when the alarm is sounding See the Setting the Alarm section to learn how to set the snooze duration Reset all settings Press the and buttons simultaneously for a few seconds Select FM Band region Reset all settings see above and use the 4 and buttons to select the region closest to you USA EUROPE JAPAN WIDE or JAPAN Then press the CLOCK button to save your selection The enhanced remote lets you operate many functions of your Altec Lansing Moondance Glow speaker system Turn on your speaker system Press the D button Turn off your speaker system Press the button Change audio source Press the button to cycle through and select the audio source iPod FM radio or AUX Play a track from your iPod n iPod mode press the button See he Listening to Your iPod section for more information Pause your iPod n iPod mode Press the Turn up the volume Press the button Turn down the volume Press the butt
22. ir return policy Tel 800 258 3288 Toll Free in US and Canada Email csupport alteclansing com If you live outside of North America please visit our Web site at www alteclansing com and select your region to locate your country s distributor For the most up to date information be sure to check our Web site at www alteclansing com International Distribution International customers For information regarding the distribution of Altec Lansing products in your country please visit www alteclansing com and click on your region Registering Your Product Visit www alteclansing com to register your product online so we can provide you with the best possible service and technical support FCC Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 4 2 This device may not cause harmful interference and This device must accept any interference received including interference that may cause undesired operation The lightning flash with arrowhead within an equilateral triangle dangerous voltage within the product s enclosure that may be of is intended to alert the user to the presence of un insulated sufficient magnitude to constitute a risk of electric shock to persons CAUTION To prevent
23. ning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped For service refer to qualified service personnel return to the dealer or call the Altec Lansing service line for assistance For products that incorporate batteries please refer to local regulations for proper battery disposal Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Contents Mee iaa ooo iia ii Safety NOM rr Ario AnD 1 Package GOotitents cct siii cxi a A A a 3 Getting Started main lit oi iii ii Placing and Removing Adapters for the iPod Speaker Features and Indicativos jecit M 7 Enhanced Remote Features a 1 neta eu Era Fein sanaazessdessresaees dane ERE E A ESSE FTU RIE ER ERA EEFE ERE esse SUFRE I RUFEN E
24. ntant une trompe Moondance M402 et M402SR sont des marques d pos es ou commerciales d Altec Lansing une filiale de Plantronics Inc Plantronics le logo et le slogan Sound Innovation sont des marques d pos es ou commerciales de Plantronics Inc iPod est une marque commerciale d Apple Computer Inc d pos e aux tats Unis et dans d autres pays e Toutes les autres marques de commerce utilis es dans la pr sente sont la propri t de leurs d tenteurs respectifs Con u par Altec Lansing aux tats Unis Fabriqu en Chine A12934 R06
25. on Skip to the beginning of the current song on your iPod n iPod mode press the button Rewind the currently playing track on your iPod n iPod mode press and hold the button Skip to the beginning of the next song on your iPod n iPod mode press the Fast forward the currently playing track on your iPod n iPod mode press and hold the button Enhanced Remote Features Source button Volume decrease button Track back button Alarm disable button FM preset buttons Power on off button Volume increase button H Track forward button Play pause button FM preset buttons Snooze button 10 Enhanced Remote Features Tune radio stations n FM mode use the 1 and 4 buttons See the Listening to the Radio section for additional information Seek radio stations n FM mode press and hold the is or 4 button See the Listening to the Radio section for additional information Store a radio station n FM mode tune to the station you d like to store and then press and hold one of the PRESET buttons P1 P2 P3 or P4 See the Listening to the Radio section for more information Select a preset radio station n FM mode press the PRESET button P1 P2 P3 or P4 that corresponds to the station you d like to hear See the Listening to the Radio section
26. rg ASIA PACIFIC 28 F Office Tower Shun Hing Square Diwang Commercial Centre 5002 Shen Nan Dong Road Shenzhen China 518008 Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Patents pending 2008 Plantronics Inc All rights reserved ALTEC ALTEC LANSING the Altec Lansing logo the horn design Moondance M402 and M402SR are trademarks or registered trademarks of Altec Lansing a division of Plantronics Inc Plantronics the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics Inc iPod is a trademark of Apple Inc registered in the U S and other countries All other trademarks appearing herein are the property of their respective owners Designed by Altec Lansing in the USA Made in China Con u pour l iPod signifie qu un accessoire lectronique a t sp cifiquement con u pour se connecter l iPod et est garanti conforme aux normes de performance Apple par le constructeur Apple n est pas responsable du fonctionnement de ce dispositif ni de sa conformit aux normes de s curit et r glementations en vigueur Brevets en instance 2008 Plantronics Inc Tous droits r serv s ALTEC ALTEC LANSING le logo Altec Lansing le logo repr se
27. tem and paired with the wireless snooze remote How to Install the Wireless Snooze Remote Battery The wireless snooze remote battery included is not installed at the factory To install the wireless snooze remote battery follow the steps below Wireless Snooze Remote Features 1 Open the battery compartment Use a coin or screwdriver to turn the battery compartment door counter clockwise 2 Position the battery included so it sits in the battery holder correctly Make sure the polarity the and Sides of the battery is correct 3 Replace the battery door NOTE Please discard used batteries properly How to Connect and Pair the Wireless Snooze Remote 1 Connect the snooze remote receiver to the SNOOZE REMOTE jack The jack is located on the back of the system 2 Press the PAIRING button on the bottom of the snooze remote receiver until the corresponding LED light stays lit S Press any button on the wireless snooze remote twice The LED light on the snooze remote receiver will turn off once the pairing process is complete NOTE Any time a button on the wireless snooze remote is pressed the LED light on the snooze remote receiver will flash 11 12 Listening to Your iPod 1 Dock your iPod in the Altec Lansing Moondance Glow speaker system 2 Select iPod mode Press the button on your speaker system or enhanced remote until the iPod icon appears on the LCD S Press the
28. ution Speaker system doesn t respond no power AC adapter isn t plugged into a wall outlet or the connector isn t plugged into the power supply jack on the back of the speaker system Plug the AC adapter into a wall outlet and plug the connector into the power supply jack on the back of the speaker system Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPod doesn t dock properly Using the wrong adapter for iPod or no adapter Make sure the adapter is the proper fit for your iPod iPod didn t install properly Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod Then reseat it in the dock iPod doesn t respond to the speaker system iPod is not installed properly Your iPod software is too old Remove your iPod from the dock and check for obstructions on the connectors in the dock and on your iPod Then reseat it in the dock Upgrade software on your iPod For details visit www apple com ipod download iPod is locked up Please make sure your iPod is working properly before docking into the unit Please refer to your iPod manual for details Using 1st or 2nd generation iPod iPod shuffle or other devices Your speaker system cannot control those iPod models or other devices See the Welcome section for a compatibility list 21 22 Troubleshooting Symptom Possibl
29. ylist on your iPod is modified either the last song on queue or the first song on your song list will play NOTE Your Altec Lansing speaker system features a backup battery If a power failure occurs or the AC cord is accidentally disconnected the display will not remain lit and the alarm will not function The correct time however will be temporarily maintained provided you have installed a 9 volt backup battery as described in the Getting Started section NOTE If the iPod or FM radio are playing when the alarm goes off the alarm will automatically default to the buzzer even if the iPod or FM radio have been selected as the alarm source Setting the Alarm 8 Setsnooze duration Press the tti or iii button on your speaker system or the enhanced remote to select the snooze duration The default snooze duration is 9 minutes and can be adjusted from 5 minutes to 60 minutes in increments of 1 minute Then press th button to save this setting and enter the Alarm Volume Set mode ALM SET SAO EE 3 minutes zBHdjuzt larmer 9 Setthe alarm volume Press the or button on your speaker system or the enhanced remote to select the alarm volume low medium or high The default alarm volume is medium Then press the utton to save this setting and exit the Alarm Set mode NOTE When exiting the Alarm Set mode the Alarm is automatically turned on STO the alarm when it sounds press and hold the corresponding How to
30. your iPod or other MP3 player off to conserve electricity Change audio source Press the button to cycle through and select the audio source iPod FM radio or AUX Play a track from your iPod n iPod mode press the 1 button See the Listening to Your iPod section for more information Pause your iPod n iPod mode Press the E button Turn up the volume Press the button Turn down the volume Press the button Skip to the beginning of the current song on your iPod n iPod mode press the button Rewind the currently playing track on your iPod Skip to the beginning of the next song on your iPod n iPod mode press and hold n iPod mode press the button Fast forward the currently playing track on your iPod n iPod mode press and hold button Tune radio stations n FM mode use the 1 and buttons See the Listening to the Radio section for additional information Speaker Controls Scan radio stations In FM mode press and hold the i information it button See the Listening to the Radio section for additional Listen to a non docking iPod or MP3 player See the Listening to a Non docking iPod or Other Portable Audio Device section for specific information on using devices attached to your speaker system s AUX jack Turn on the mood light Press the button See the Mood Light section for more
Download Pdf Manuals
Related Search