yakima whispbar roof racks k408 fit kit installation instructions help
Contents
1. through the hole in the clamp Do not begin to tighten the locking screw Refer to the underside of the pad for the part number Fitting Kit Letters refer to the pad part numbers and position Pad Part Number A 11 04 251 B 11 04 250 C 11 04 241 Fit rubber pads supplied with fitting kit to foot Pad may vary in shape to that shown Make sure the pad fits into the holes underneath the foot Fitting Kt Fitment Place crossbar on vehicle Minimum recommended spacing between the bars is 700mm unless otherwise stated Please check the rear of this manual for information relating specifically to your vehicle Locate vehicle s fixed points Clamps directly to edge of roof under the doors pin locates in hole on vehicle Adjust the legs on the crossbar so that they are positioned equally from the ends of the crossbar and the clamps engage firmly on the body work of the vehicle Tighten adjusting screw to 5 Nm Fitting Kt Tighten locking screw on both legs evenly Check crossbar is securely attached to the vehicle Use keys to fit and lock covers2. Prorack Loads of life GB Fitting Instructions for Basic Carrier r F i E i Jui a z a Fi Jg r a j E ur x E ul x J E X F F X E X E j iF Es E VU ag r gor EU o 11 04 251 Revision No 1 2 giu ae Nit N First Time Installation Remove parts from packaging and check contents Contact your Prorack dealer if parts are missing or damaged u ES ag his kit fits type A B C and D These instructions show type A crossbar fitted They also apply to type B C and D a am D NOTE Clamp images in these instructions may not be representative of the clamps in this kit Fitting Kt Use keys to remove covers Use hex screwdriver to reverse adjusting screw 10 turns Press adjusting screw and pull crossbar legs out Refer to the crossbar instructions for crossbar adjustment Ensure each end of the crossbar is adjusted equally Fitting Kt Remove locking screw Apply protective strip as shown Trim if required tee Cip Sei Letters refer to the part numbers stamped on clamps amp Clamp Part Number mm A 552 C i oo B 553 E o Q l j p mM a 7 Fitting Kt Attach clamp to each leg NOTE clamps may have labels showing their positions on the vehicle For example Front Right Refit locking screw so that it goes
Download Pdf Manuals
Related Search