Home

ＮｅｔＤＶＲ - บริษัท E-Com A

1. It probably takes 1 2 minutes to update the software 7 When a window that contains the information of upgrading successfully pops up it means that the update finished Then the machine will automatically restart 8 After the system restart the admin password power password and upgrading password will resume 4 13 Power Resume If the power is shut down unexpectedly when the system is in standby or working status system could start automatically restart and resume to the original status after power back The advantage of this function assure the system maintain the continuity condition for outage Se Net DVR Appendix 1 IE Operation Instructions Notice Please set firewall rank for low or medium and surf software or net assistant software etc should be blocked or unloaded Otherwise the software may not run properly Please guarantee to install DirectX 9 0 of Microsoft and confirm the Internet Explorer edition is 6 0 version or above 1 LAN Configuration for IE Browse 1 Ping the host IP first to confirm if the DVR is connected 2 Type the host IP into windows IE and connect to the DVR Input user name and password to log in If the log in is succeeded the following interface will pop out C HINDOWS system32 comd exe O x C Documents and Settings Administrator gt PING 192 168 6 19 Pinging 192 168 8 19 with 32 bytes of data Reply from 192 168 0 19 s time lt ims TTL 64 Reply from 192 1
2. Sl oo Il User Manual 4 7 1 Disk Format Format jii The system only supports the FAT32 disk format please format on hard drive recorders and use above 32G disks the system only identify a backup area sk 1 e formatted a date Format choose the disk number that needs to format press confirmation key will be lost do to enter the area identified by type data or backup such as the left graph MEE ME choose partition type confirm it then the interface will show it is formatting Wait four seconds the disk will be formatted 4 8 System Management mp 2 E q Channe COM Almout After login user can through Main menu System Management enter the System Management interface The fig is as follow ae f Las xd Passso rd Default emm 52 ma ins Net DVR Ill 4 8 1 System Time After login user can through SETUP Sys Time enter the system time interface The fig is as follow This function is used to set or modify current system time system uses a calendar function as the week will be modified with changing the date After saving the setting the system will reboot automatically in order to make the modified time effective Attention Please adjust the system time for first using Because system time is in close relation with video record do not adjust system time under normal circumstances 4 8 2 Channel Setup After log in u
3. Backup files list Display added record files Backup host User can name the host to differ it from other hosts After setting up the host name user can click save to confirm it Note The host name can be set up to maximum 32 characters 4 11 2 Backup file playback To playback the backup files user has to enter the backup interface Select the file and press ENTER to playback Backup file list Display backup file information of a certain date 66 oo ins Net DVR lll Backup date Display the backup files in current HDD backup partition Move the cursor on the date icon and press ENTER and the file list at the right side would diaplay all files information of the date 4 12 Software Update Instructions of update gt Please double check the version of the upgrade software including machine model and boot interface If you have any doubts make sure it corresponds to yuor system we recommend you keep the default version Or in case you fail to upgrade the firmware you can neither redo the system upgrade or restart the machine gt do ensure supplying the power and the stability of network when upgrading Network outages and interrupted power supply will cause upgrading failure On a PC client remote upgrade download files completed the host side did not appear the update was successful in six minutes which is resuming the equipment later Tips you can shut down and then reboot
4. emm 3 m User Manual If the distance between the probe and DVR is too far the probe requires a separate power supply 12V power supply separately n 12V GND Input Input2 L Probe When supply power separately it is also conditional to connect the two ends If you use parallel probe as many probes use an alarm output computer host will not be able to distinguish which one alarm Only pay attention to the need for a resistor 84 m Net DVR lll 3 Alarm output connecting way Alarm fan out is normally disconnected when need to alarm it will close it does not have voltage output external speakers lights sirens could work regularly only when the exterior could supply the power Alarm s power usually is much bigger preferably supply power separately and do not use the DVR s power to supply Each series alarm output touch point parameters are as follows DVR7000 series 120 V AC 24VDC Exceeding this power will damage the motherboard supply the power separately 85 m NOTES User Manual
5. 4 4 4 Alarm Video 4 5 Network EE 4 5 IP Setting cum ii aa 52 pPPORES ehe REI S PUDE ND UM AM dd LIE A DI DIA N EON AT E 4 7 Disk Management 4 7 1 Disk Format 4 835 ystem Manace MENT E 52 4 8 1 System TIME sireeni 23 48 2 Channel IDEM m 53 4 8 3 Serial wo INIM 54 DN AAlarm OUTPUT MR rm 55 A OSC i Mana sement errr ren es Mo TII NU LIUM Au MEI LM IM ML ee 56 BIO PASO AU 58 45 7 Renew Default td ia 60 4 9 Device Information ioci oerte een aria cubs anes iis ee eroi tetto 61 ESE Informatio P T 62 Loser 62 49 3 Conchis PEEL 63 AOA Log een e 64 4 9 5 Alarm Status ansia mota aiii 64 4 10 Play Back Opera ii a oia 65 ins Net DVR 4 11 Backup 4 11 1 Backup Files 4 11 2 Backup File Playback de 66 Cu PANT Update 4 13 Breaking Power Resume Appendix 1 IE Operation Inst ii iia 69 1 LAN Configuration for TE Browse SC 69 2 WAN Operation Instruepong e ENEE dee 70 Appendix 27 Net DV OA P 73
6. and stops recording So the recorded files may be not continuous 07 Why use client manager software to backup data click on the backup but not respond dio Check if firewall is open Opening a firewall could lead the client program can not backup data from host side 08 Why show that backup is successful but there is no backup data in the list 08 Host side can not back up the data recorded within 15 minutes For example It is now time 12 00 the video data between 11 45 12 00 can not be backupped 2 09 Why it displays mosaics when playback 09 Hard disk errors may also cause mosaics If it is logic damage please repartition and reformat the hard drive If it is physical damage please replace a hard drive 10 Why playback is quite slow 0 1 Please check whether you choose the slow playback Our DVRs support 1 2 1 4 1 8 1 16 of the slow speed 2 Please check whether the hard cable is connected well meanwhile check whether there is a damage to the sector of hard disk When there is an existence of a bad hard drive sector it will appear the phenomenon such as playback pause 11 Why the images are shaking during live view or playback dir Check the format of DVR and cameras system Make sure they are in same format PAL or NTSC CL E Alarm PTZ control 01 How to connect sensor to the system fir Our system supports general sensors e g smoke sensor IR sensor and supports normal open and norma
7. 1 channel composite video output BNC 1 Vp p 75 Q PAL 625 line frame NTSC 525 line frame 1 VGA output or DVI digital display mode output Frequency 60 Hz resolution 800 600 Support CIF 25 fps DVR7000 series and high definition D1 25 fps DVR7200 series 2 Audio parameters Audio input 4 8 16 channels audio input BNC 2 Vp p 10K Q Voice chat 1 channel audio input BNC 10K 2 Vp p 50mV MIC in Audio output 1 channel audio input BNC 2 Vp p 10K Q 3 Video Compression H 264 CIF 352 288 D1 704 576 4 Audio Compression G 711 Audio sampling rate 8K sample sec 16 bit sample 5 Operation System Real Time Operation System RTOS 6 HDD interface 1 2 SATA interfaces support 48bit LBA working mode 7 Alarm interface Alarm input Support opened circuit and delay closed circuit input 2 4 8 channels alarm input ins Net DVR Alarm output 2 channels alarm output delay opened circuit relay output 8 I O interface RS485 interface supports network transparent channel connection PS 2 mouse with keyboard and serial port control keyboard 9 Operation mode multi functional IR remote control PS 2 mouse keyboard serial port control keyboard 10 Backup interface 1 SATA interface 2 USB2 0 interfaces on back panel support data backup function 11 Network port RJ 45 10M 100M Ethernet Interface 12 Power supply 12V 5A DVR7004 is 3A 13 Dimension 405mmx 310mmx 55mm DVR7004 is 325mmx 200mmx 55mm Length Width High
8. 5 Alarm output duplication function 30 sss Net DVR Il User account Add and delete user account change local user account and remote user management account authority System Password setup Setup on off password system and upgrade password Management Restore to default Restore to default setting setting Display software version mainboard serial no SCM version IP System info f address NIC Mac address file system Video standard and language Query the recording file data by sort Information Recording Status Display the recording status of each channel Query system log Display the alarm status of each channel Back up Back up recording date from DVR host Function T Adjustment for Brightness Contrast Saturation and Hue Three ispla died different time period can be set Period1 Period2 and Default Accurate Time Fast track to an accurate time point and playback Playback 31 Il User Manual Chapter 4 Device Operation 4 Power On off and Login Lock Power on After connected up the power cable the front panel of the DVR will start and enter the standby state Click the power button on the remote controller for 3 seconds to enter the running state Power off When the system is under the running state click power button on the remote controller to popup the shut down interface After user typed the correct password default is 000000 and clicked the confirm button
9. Why I cannot make timer record schedule record 03 1 Please check if you have corrected the set of the schedules There are two period of time and please make sure the first time period is before the second one 2 Please check if power supply was cut off in the scheduled time periods 3 Users needing the data has been covered 4 User s hard drive has a physical damage or a logical error which will result in the data to refresh normally 04 Why I cannot make motion detection record 04 1 Please check the motion detection record schedule setting There are two periods The first one shall be ahead of the second one 2 Please check if you have correctly selected the motion detection areas 3 Maybe caused by too low sensitivity Try to increase the motion detection sensitivity 05 Why cannot I make alarm record 05 1 Please check the alarm record schedule setting There are two periods The first one shall be ahead of the second one 2 Please refer to the alarm record setup window to check if the alarm linkage channels are well set 3 Please check if the sensors are well mounted 06 Why the recorded videos are not continuous dir oe 1 In case you are applying manual record or timer record mode please check if power supply was cut off in the period 2 In case 78 m Net DVR Il you are applying motion detection or alarm record mode as system only records after the motion or alarm happens and lasts for a specific time
10. lr 06 Please make restore to factory default settings 07 Why it displays mosaics when playback 07 1 Check the recording parameter setting If the recording parameter is set too low it can influence the image quality and cause mosaics 2 If bad sectors exist in the HDD it might cause mosaics when playback Users need to check HDD INA C Client manager and remote functions 01 Why my windows system refused my installing client manager software dr You may haven t installed DirectX8 1 or above Please make sure you have installed before installation Il User Manual m EEEEIN 2 02 How to make remote surveillance 02 1 Install the client manager software and connect the computer to the network e g LAN ADSL 2 Set a fixed IP for the DVR a In LAN manually give the DVR an IP like 192 168 1 188 b In Internet you should apply for the fixed IP from Internet services suppliers 3 Client PC should also get an IP If it s in the same LAN as DVR then set manually an IP like 192 168 1 23 for the PC 4 Test the connection between client PC and DVR by PING the DVR IP address on the PC 5 Input DVR IP address and port number in the client manager software as well as the user name and password that is preset on DVR 03 When I connect to remote DVR but I can get only picture with mosaics and sometimes pictures are still Why dro 1 Please check the network conditions It s probably blocked or very busy so some video dat
11. mm iil User Manual 2 2 Main Functions High effective RTOS and embedded processor are adopted in this series DVR as well as all functions needed for the monitoring system are integrated Codex is solidified in the flash chip to keep the system in high stability and reliability System can also work in a long time surveillance environment and even in stringent circumstance Note The following features might differ from the below description since we have series products and different hardware and software versions Compression features 1 Support PAL NTSC4 43 NTSC3 58 2 Video compression is H 264 supports VBR and CBR 3 The image quality and compression rate adjustable 4 Every video audio channel is compressed separately The audio standard is G 711 and the sample point is 8K sample point per second and 16 bit per sample point 5 Video and audio are compressed to H 264 stream format Audio and video will be kept synchronized for playback and audio recording can be canceled if only video is in need 6 Support dual stream encode 7 6 level record quality is provided for select Users can choose any preferred one Network functions 1 Support TCP IP protocols support ARP RARP IP TCP UDP PPPOE DHCP DDNS 2 Client manager and IE browse can be used to control the DVR through network such as record VOD PTZ control etc 3 By embedded PTZ protocols user can control the PTZ on the DVR the client manager and
12. of detecting to probe alarm according to the process of starting alarm linkage video For example set up the probe video time for 30 seconds set up the channel anti time for one hour if the alarm interval been detected within an hour is always smaller than 30 seconds then this channel in this hour will always be in the video state From this point we can see that if the probe did not reset after alarming the video will always continue Ill User Manual 3 Choose probe number may choose different probes for alarm video suggest the linkage of each probe and the corresponding video channel in order to find the video data according to access 4 Choice of deployment time on the Open icon click OK button to enter specific time deployed settings of the passage specific time deployed settings please refer to 4 4 2 1 deployment time settings 5 Set up linkage video channel In case of happening to alarm you can designate one or more channels for video the setting way is to select a good channel during the process of linked video channel and then click OK button green to check The system defaults the probe of corresponding with linked video channel 6 Alarm output settings Set the alarm to trigger corresponding with alarm output green for election 7 Set sound alarm after the option to enable voice alarm function when the alarm was generated there will have voice alarm need external speakers and other
13. then check whether the host computer update was successful Please double check the version of the upgrade software including machine model and boot interface If you have any doubts make sure it corresponds to your system we recommend you keep the default version Or in case you fail to upgrade the firmware you can neither redo the system upgrade nor restart the machine After upgrade please visit our website or get electronic version of user manual from your suppliers so you will understand new features after software upgrade gt don t modify the software otherwise we will take no responsibility and will not provide free updates Make sure the Client Installation procedure is the same as the system installation procedure is inside Software CD ROM Ill User Manual We take DVR7016V to introduce the operation procedures 1 Connect the Net DVR to PC by coherent network cable or LAN pay attention to prevent IP conflict 2 Before upgrading please confirm the IP address of host computer then enter client end 3 After login and choose systematic set up Remote updated 4 Choose Browse choose the file to be updated and refer to the following fig left figure 5 The following fig is displayed on DVR regiht figure IP 192 168 3 75 fx Upgrade E eee 072118004 flash bin Browse receiving 17 6 Waits for 3 seconds the Net DVR will display Transmiting data finished Updating software
14. to enter display setup the fig is as follow O Contrast When you enable this option you can setup the Display Contrast There are 5 levels 1 1 2 1 3 1 4 1 5 1 and the default value is 5 1 When 1 is chosen the background color is the lightest ae A wes Overwrite mode This setting can effect in all channels 1 Auto Cycle When the hard disk is recorded fully this mode will automatically overlay the oldest record file 2 Alarm alert When the hard disk is recorded fully this mode will automatically prompt you whether to overlay the oldest record file or change the hard disk Attention It will not record from popup hint to clicking Confirm For avoiding lose recorded file by negligence we do not commend that function Record mode When you enable this option the record status of each channel will be displayed on the top left corner If channel is for manual recording manual is displayed Mic and pickup option OSD Prevfew O Channa O On screen e Auto Lock Prevfew Po Voice Chat __Net DVR Il 5 1 Auto Cycle Alarm alert Date format yyyy mm dd Time w Week DYR board temparature Lock Time 10 Minutes ng Interval 15 seconds QUT Phone Support Mic and Pickup input Please choose Mic or pickup as voice chat device Due to the output of Mic and pickup is SOMW and 1000MW the DVR provides Mic and pickup options for voice chat de
15. Appendix 3 Alarm E rn E 81 iil User Manual Chapter 1 Brief Introduction about the DVR 1 1 Summarization DVR7000 series Digital Video Recorder are designed for audio digital surveillance system They are based on NXP Trimedia and DSP DMS645 from TI adopting H 264 compress format integrate the embedded RTOS and processor to realize all of the functions like video and audio acquisition and compression storing remote control PTZ control and alarm checking on a single board which ensure the system s high integration and reliability DVR7000 series support TCP TP agreements support ARP RARP TCP UDP PPPOE DDNS DHCP We adopt dual stream technology which can guarantee the WAN transmission effect but not influence the local storages at the same time We provide complete network monitor client software User can also enter the DVR to browse the video signal in every channel control the PTZ and VOD etc via IE DVR7000 series only support the remote controller and mouse operation sss Net DVR 1 2 Product Introduction DVR7000 series CIF resolution standalone Digital Video Recorder Model Function DVR7004 DVR7008V DVR7016V DVR7202 DVR7204 DVR7208 F PS 2 Mouse support support support support support support User Manual Chapter 2 Technology Guideline and Main Functions 2 1 Technology Guideline 1 Video parameters Video input composite video input PAL 25 fps NTSC 30 fps BNC 1V P P 75Q Video output
16. IE 4 Firmware upgrade through network makes aftersale service much easier Recording functions 1 Support manual schedule motion detection alarm record a 10 oom OMAN DNDN A WN Accurate time orientation NWN fF WN o iss Net DVR ll Video motion detection function multi detection areas can be set up to 5 sensitive levels Support full screen shield and part area shield Support real time record shield and playback shield Support sensor alarm One sensor can be linked to one or more cameras Support alarm recall to PTZ preset point Monitoring center can record the real time compression code stream and support synchronizing record video and audio into client PC Video and audio parameters of each camera can be set up separately Support OSD support record status indication Support pentaplex operation Support record status inquiry function Playback functions Record information classification checking playback Support display function big and small images could be changed Support real time surveillance and playback that could be shown at the same time Support fast replay slow replay backward and pause and frame step playback Support playback and download recording files through client manager and do not affect the recording quality Support multi channels playback DVR7200 DVR7004 series except Real time display features l 2 3 4 3 Support
17. Log off 17 Information 18 Backup 19 Image Iriss 20 Shift Zoom 21 Clear lris 34 5IKL 22 Format Zoom 23 Record 24 Up Slow Motion TEXT 26 Down Frame Forward For detailed functional description please refer to 3 4 1 the instruction of front panel Note F1 and F2 are preserved functional keys Lu Lu 26 Net DVR l 3 7 Menu Operation Description 3 7 1 Structure Chart Manual Record Schedule Record Display Para Motion Record Alarm Record Record Para Record Mode Weil ieme i Me a PA A mg BI 10 03 E System info Record Info Default Information Record Status Log Info User Manual 3 7 2 Menu Option Schedule 1 Display contrast From 1 1 to 1 5 the color of background is changed from light to dark 2 Video Format PAL NTSC4 43 NTSC3 58 3 Record Overwrite Mode Display Record Mode Voice call input mic voice pickup Image auto switch Setup 3 60 seconds Date display format year month day day month year 4 5 6 Auto Lock Setup 0 10 minutes 7 8 9 Preview Playback OSD Setup channel time date Definition CIF D1 Bit Rate VBR CBR Constant HD Bit Rate Size 100K 128K 256K 512K 1M 2M 3M 4M Record Image quality 1 6 level 1 is highest Parameters Record Type Manual Schedule Motion Alarm AII Video Frame rate PAL 2 25F S NTSC 2 30F S optional Audio Network HD Bit Rate according to TCP stream 28 mu Re
18. Press to enter the Rec Info Or press Info to get File info interface Then users can search by category to playback selected files e Time search playback interface is as the right graph 4 11 Backup Operation There are two ways for backup 1 Backup the file directly to the local hard disks Backup the file to remote computer through network To backup record file by remote PC will be described in Client User Manual We only introduce local backup in this section System only supports one backup HDD partition System supports SATA disk and USB disk backup Support USB disk and SATA HDD hot swap Backup disk must be FAT32 with capacity bigger than 512M iil User Manual m DEBEN 4 11 1 Backup Files BACKUP fig is as follow Backup function allows to backup up to 16 record files for different channels in different time periods See the details of backup process 1 Input time period and channel number 2 Move the cursor to ADD and press to confirm The added file will appear in the backup files list For more record files please select the time period and channel number and add them to the list 3 After you add all the files move the cursor to BACKUP icon and press to confirm then system would automatically start to backup Note User can only backup recording data 15 minutes prior For example The time is 11 00 now user can only backup recording files before 10 45
19. The detail set of keyboard can refer to the user manual of keyboard 3 3 7 Intercommunication Port There is a voice input port on the back panel which is used to connect with audio input device such as microphone Please select active microphone or pick up The MIC voltage output is 50MV and the pick up voltage output is 1000MV Please refer to main menu gt display setup gt intercom input there are options on the DVR menu for users to select MIC or pick up as intercommunication input EHE 21 mum ll User Manual 3 4 Front Panel Description 3 4 1 DVR7000 Front Panel and Layout Description MARK NAME o When power the main board the system isin operation the lightis green when the system POWER Power Indication Light in standby mode the light is red when the system is in standby mode the light goes out When the system is in the state the indicator light flashes When the system isin the non REC Record Indication Light video state the light goes out IR T E dee te the host computer by usi te controller the light is bright indeation iehi en you operate the host computer by using remote controller the light is bright NE When there has the alarm information the indicator light flashes when there has no the ALARM Alarm Indication Light alarm information the indicator light goes out ins Net DVR l 3 5 Mouse Operation Besides front panel and remote control mouse also can be used to control the
20. ball machine agreement baud rate and line ball machine settings keep consistent PTZ control select the control channel the single channel in full screen display or the top left channel of multi channel display Control types Front panel control when PTZ light on the front panel is on Remote control when speed doom symbol is on the live view image remote client manager control and IE control a 5 oo ins Net DVR lll Preset Call function introduction Set PTZ in a position click Preset on remote controller or the front panel and there will be a small blue pane displayed on lower right of screen please input number into it such as 001 Using the direction key to move PTZ press Transfer on remote control or the CALL button on the front panel input 001 into the small blue pane on lower right of screen and then PTZ will be turned the preset position The number for preset or call must be set for 3 digitals 001 255 255 means closed 4 7 Disk Management After login user can through Main menu Disks enter the Disks interface as follow The 1st line displays the connective HDD number DVR7016V has 4 SATA interfaces against HDD number 0 to 4 system default number is 0 The 2nd line displays the HDD status The 3rd 4th and 5th lines display the HDD capacity free space and partition type information The last line displays the total HDD capacity and total free space
21. carefully dispose connection cables secure thunder proof RS485 For PTZ control series keyboard and transparency port connection 3 3 6 1 The Way to Control the PTZ 1 In Main menu gt System management gt Series set of DVR setting the full duplex and semi duplex 2 In Main menu gt PTZ set set the protocol baud rate and address code of the PTZ 3 You can control the PTZ after login the PTZ lamp on the front panel will be lighted 4 You have to shift the image to the corresponding channel If you want to control the PTZ in the division image model you must let the channel fixed on the left up corner a 20 oo ins Net DVR Ill 3 3 6 2 Keyboard controlling It you want to control more than one DVR in a status you have to use the series keyboard one series keyboard can control more than one DVR in the same model The function of the keyboard is the same with the front panel of DVR Note the keyboard must be added with the protocol from our company and go through the test of our company Take the RS485 interface series keyboard for example 1 In the DVR menu system management gt series set to set full duplex semi duplex 2 Connect with the power supplier 3 Connect between RS485 of the keyboard and RS485 of the DVR also RS485 of the keyboard and RS485 of the DVR 4 Shift keyboard mode to DVR mode input corresponding address code then you can control DVRs
22. equipment settings way is to click OK to set up in the Enable sound alarm a red hook for election Net DVR Il 8 PTZ preset Set up cloud desk presetting spot When the probe detected the alarm cloud desk jumped to the point presetted settings way is that in the jump cloud desk presetting point choose open to enter the settings interface select channel number and cloud desk presetting point then returned Note the scope of Cloud desk presetting point is 1 to 255 255 stands for shutting down when copying the channel this option will not be copied to other channels After finishing the settings click the Save button to save all the parameters settings click on the replacement will stand for restoring to default status click on the Back button to withdraw from mobile video settings Il User Manual DEBEN 4 5 Network Setting Enter the IP setting and choose the IP setting and interface is as below left en Auto acquire 1P address Custom IP Address el Multicast 4 5 1 IP Setting After login through the main menu gt Network Settings button continuous operation into the network settings interface the interface is as follows right ins Net DVR lll Auto acquire IP address the premise is that network has DHCP service After starting the equipment it will obtain a dynamic IP address and displayed wi
23. the system will enter the standby state Login Lock To avoid unauthorized user using the machine or influencing the system s normal working we specially set the key lock and unlock function for the machine 4 1 1 Keystroke Unlock Lock When multi DVRs are put to work together using the remote control may influence the machines which users do not intend to control So we set system key lock function correspond to remote control Under the system management of DVR main menu please enter series configuration and set up Device Number then enable key lock and save it Now to press the DN button on the remote controller the DVR is locked and you will see the LOCK light on the front panel is on To unlock the DVR please press the DN button and input the corresponding DVR Device Number Device Number range is 0 99 default set is 33 If the Device Number is forgot you can get it back by password retrieval Please refer to Section 4 8 6 password setup Note If the remote control does not respond please check if this function is enabled emm 32 oo Net DVR 4 1 2 System Login When the systemis in the status of locking press the button on the front panel or the remote controller about 1 second the port of login will appear as follows Input user name and password on the login port distribute in authority in advance after you input correct user name and password and press ENTER the sign a on the lower left c
24. to restore the current channel status O Copy channel User can click Confirm button to copy the current channel parameter to all channels Set up after the completion of the above according to confirm key to preservation and then return to the higher level menu 4 4 Record Mode Enter Record Mode Login and choose Record Mode from Main Menu There are 4 kinds of the recording mode Manual Record Schedule Record Motion Record and Alarm Record Note Before starting one or some record modes please make sure the login user has the operation authority for manual record Schedule record motion detection record and alarm record Before starting record please also make sure there is HDD installed in the machine and the HDD can be formatted to data partitions After recording modes are set up the record status is easy to check in the GUI Refer to 16 2 display setting Users also can enter information gt record status to check the recording status for all channels Refer to 4 9 3 record status a 39 oom ll User Manual 4 4 1 Manual Record Operations steps Manual Record 1 Choose main menu gt Record mode gt manual record to enter the setting interface of manual record The setting interface is as follows 2 Move cursor on the icon and press Confirm to select or release When the icon turns blue the manual record is started Th
25. 00 oo ins Net DVR lll Record Parameter Record Type all Resolution CIF Encoding Stream Type CBR Encoding Stream 2M Local Record Quality 2 Local Video Frame 25 Local Audio Enable Transmission Encoding stream 512K Network quality 3 Network audio Enabled Record Mode Manual record Disabled Schedule record Disabled Motion Detect record Disabled Alarm record Disabled Network Setting Auto redial after network break down off Auto log in off PTZ Setup Protocol Unknown Baudrate Default Address correspond to channel number Channel Setup Channel name restore to default setting Video Lost Alarm Disabled Alarm Output Channel 1 2 Video Mask Disabled Uart Setup DVR Number 33 Button Lock Disabled Serie Port Stype RS 485 Serie Port Mode Dualplex Address 1 4 9 Device Information The information system includes system information recording information record status system log and alarm status The fig is as follow Il User Manual 4 9 1 System Information The system information port is as follows It displays software version board number SMC version IP address network card physical address file system the system only supports FAT32 file format andlanguage gt 00 00 08 01 07 33 100 430 4 9 2 Record Information The fig is as below a 62 oom Net DVR Il The left side s date shows green this means that the green date of current selecti
26. 1 Check if the power is on or not If the power is on the power light at the front panel should be on 2 Check the display mode Refer to VGA CVBS display switch from the user manual 02 Why my DVR display images that seems to be interfered and like water wave shape ir 1 Please check if the video cable has well connected 2 Check if there are strong electricity current around the video cable Please don t put video cable together with electricity cables to avoid interfering 3 Please check if the DVR case is well grounded ae 74 m in Net DVR Il Only connect the case to ground by the screw on the back panel while no other points connect to ground 4 Please check camera monitor and video cables if they are aging 03 Why both the live display image and playback image are not showing the true color dir oo Please check if you have set the parameters well Please refer to chapter 4 2 1 for details 04 Why my DVR displays distorted images on VGA monitor or cannot make full screen display P T 1 Please check if your VGA monitor is well set up 2 Change your VGA monitor settings till make it full screen 05 Why my DVR system shows disordered color di os 1 Please check you VGA data line as well as connection condition between DVR to VGA monitor 2 Check if the DVR system has overheat 2 06 I started my system seeming to be successfull but there was a certain channel displaying nothing neither caption Why
27. 68 0 19 time lt ims TTL 64 Reply from 192 168 6 19 time lt ims TTL 64 Reply from 192 168 8 19 time lt ims TTL 64 Ping statistics for 192 168 0 19 Packets Sent 4 Received 4 Lost OB loss Approximate round trip times in milli seconds Minimum ms Maximum ms Average Gms C Documents and Settings Administrator gt IIl User Manual ____ FM 3 Please refer to Client user guide for further operation 2 WAN Operation Instructions WI there is a fixed WAN IP address that can be allocated to the DVR host the DVR host can directly access wide area network and can be visited after set up IP subnet mask and gateway E The host setting steps are as follows after logging click the Menu button enter Network Settings then choose and enter the Dial up Settings interface input the user name and password and click on the Link to make the DVR host access Internet by dial up After dial up successfully Net DVR will display relevant information User can input the host IP address in windows IE and visit the host through network If you want to connect multiple DVRs to wide area network with only one IP please refer to the following instruction Firstly set up IP subnet mask and gateway in the IP set up interface of network setting in the main menu of host DVR Note Gateway must be set the same as the mapping router s LAN IP After set up connect the host to LAN to make t
28. Motion area Firstly user needs to set the motion area Move the cursor to detection area and click Confirm to enter the motion area setup Each channel motion detection areas PAL 396 22 18 NTSC 330 22 15 The cursor is at the top left black square You can set the motion detection area by moving the cursor then press OK to confirm it and then the set area will turn to green The rest area rather than for motion detection is in yellow Default setting is full area for motion detection 7 Alarm output and Alarm output time period It s used to set the linkage output of motion alarm Green indicates selected and grey indicates unselected Default time period for alarm output is 00 00 23 59 8 Audio device When you select this option the audio device which is connected to the machine would ring when the system detects motion alarm All settings is ok click the save button and all the parameters will be kept If you click back the settings will be cancelled If you click reset the system restore default 4 4 4 Alarm Video Alarm video setup computer 1 Enter the setting interface with alarm video and login to system choose main menu Video mode gt alarm record into the setting interface of alarm video and the setting interface is as follows 2 Set up Alarm video time choose the time of alarm video the scope is 1 to 99 seconds Note The video stopped time will begin at the last time
29. RCA monitor and VGA output Support video parameter adjustment brightness contrast hue saturation Support simultaneous real time monitor and playback Support channel auto switch Support intercommunication between monitoring center and DVR network Il User Manual mm EEEBNI Storing and backup functions 1 Support USB2 0 backup interface 2 Backup record files through client manager software and windows IE 3 Backup record files through windows IE Alarm inspection functions 1 Local alarm Video lost alarm motion detection alarm sensor alarm no HDD alarm no HDD space alarm video abnormal alarm HDD sector error alarm 2 Remote alarm Video lost alarm motion detection alarm and sensor alarm can be sent to client manager Also you can open the motion detection record files using the client manager 3 Video lost alarm motion detection alarm and sensor alarm can be transmitted to the external equipment such as mobile phone or fixed phone within three seconds Security guarantee 1 High quality 32 bits embedded microprocessor and embedded RTOS which ensure the system s high affectivity reliability and stability 2 Complete log search sensor record log motion detection record log remote login log record parameter modification log update log playback log system boot up log and backup log 3 Multiple security guarantee function such as system lock key lock order check user privilege can add 16
30. VR7004 i n 2 1418 233 AUDIO OUT LAA E AR 3 DVR7008V ON E CC ee G t 9 vec m A Ot L MC UEM maner ALARMOUT ALARMIN ors 4 DVR7204 HEEL ius ES moma mae a aW VP 38 4 User Manual 5 DVR7208 VIDEO iN MONITOR ALARM IN ON 22322 2A 28 14 1BGNO 15 55 14 12 12 tt 30 8 AUDIO IN AUDIO OUT VGA MIC USB ETHERNET ALARM OUT ALARM IN OFF ETHERNET Connect Ethernet device such as HUB ALARM RS 485 Connect RS 485 12V DC POWER Choose AC voltage 220V 110V through switch ON OFF Power supply switch 18 mu i Net DVR 3 3 2 Video Audio Connectio DVR7000 series have no loop output Mode of video output 1 When system opens it will automatically identify whether it has connected VGA or monitor DVR7000 series do not support connecting the VGA or monitor at the same time it only could be connected separately DVR7200 series support connecting the VGA and monitor at the same time For example if you only connect VGA VGA menu will be output the monitor will not be output it you only connect monitor monitor menu will be output the VGA will not be output Connecting the VGA and monitor at the same time you could change TV VGA by remote controller Audio output cautions if you want to connect sound box for audio output please use 3 5mm to two lotus flower cable for change 3 3 3 USB connection This port is just used to backup The capacity for the U dis
31. a may lose in transmission which will cause mosaics 2 Check the DVR server side if the original images have mosaics 3 On win2003 operating system after the successfully sign if DVR client cannot open image or images have mosaics please set as the following On the desktop space click the right button of mouse and select Attribute gt Settings gt High gt FAQ gt hardware acceleration option completely 04 I have well connected the DVR with network cable network cable indicator light flashes but I fail to Ping the DVR from remote computers Why 04 Please input arp d command on Run Interface of Computer to delete items set by inet addr 05 How to use client software to access DVR server amp 05 A Make sure whether the DVR server is turned on B Make sure the IP of DVR server is unique C Make sure the client software is installed correctly on the client side D Use command ping to check whether the computer connected to DVR host If not Please input arp d command to delete items set by inet addr For example a 76 m m Net DVR Following picture shows computer and 192 168 0 19 DVR connection has been established Following picture shows computer and 192 168 0 11 DVR connection has not been established ET CAAWINDOWS System32 cmdene E Enter the client software F Input the IP Port user name password of the DVR server and then click login Note If you st
32. an t cross containment and can t spring over a constitution User may single click the mouse trolley getting the flexible keyboard to set up time period 4 4 3 Motion Record By analyzing the real time video the system could confirm whether the video scene has changed or not User could set the motion record time schedule time sensitivity detection area alarm output channel and audio alarm Il User Manual m EEEE 1 Enter the setting interface with motion record and login to system choose main menu gt Record mode gt Motion record into the setting interface of manual record and the setting interface is as follows 2 Set the alarm record time It means the time period of recording which is triggered by the motion alarm The scope is 1 99 seconds Attention The system would stop recording as the last motion detect alarm happened For example If the motion detect time is 5 seconds and the period is an hour the corresponding channel will be recording all the time as the motion interval is less than 5 seconds 3 Select the channel to record 4 Setup the Alarm Schedule You can set different motion alarm periods for each channel The everyday record period of a week can be set the periods of corresponding channel 5 Select the sensitivity The sensitivity of the motion detection is adjustable 1 5 and the sensitivity goes up in order from 1 to 5 em 42 wes is Net DVR 6 Setup the
33. cord Mode Manual Mode Schedule Mode Motion Mode Alarm Mode 12474 Setting manual record Setting continuous record time table 1 Motion record time 1 99 s 2 Alarm schedule 3 Motion detect sensitivity 1 5 level 5 is the highest 4 Setup motion detect area 5 Select alarm output and voice alarm 6 Channel replication 1 Alarm record time 1 99 s 2 Sensor ID 3 Alarm schedule 4 Relate the recording channel 5 Alarm output and voice alarm 6 Jump PTZ preset position 7 Channel replication 29 Net DVR User Manual mam DEBEN Setting Server name DNS server IP address Network transport ports LAN IP setup multicast Network Setup Dial up setup Setting dial up username and password for PPPOE dial up DDNS Embedded the Peanut Client software support DDNS function PTZ Setup A Setting PTZ protocol baudrate address Disk Display HDD status and information implement HDD formatting function Time setup Setup system time and date Management Setup channel name video lost alert mask area channel replication automatic Channel setup cruise System 1 Server Index No Lock Management Serial port setup 2 Serial Device RS485 and serial port mode full duplex semi duplex 3 Address Code Setup 1 Full screen when alarm triggered Alarm output 2 Buzzer alarm output 3 Alarm retain time 0 300s 4 Alarm recording time
34. d hours capacity per hour M hour For example If you choose the recording bit rate type for CBR 512KB refer to 4 3 for bit rate types the HDD Capacity hour channel bit rate Mbps 3600s 512Kbps 3600s 1800MBb 225MB 1MB 8Mb Due to the various factors the calculated result is for reference only Some slight differences or small errors might exist in the calculation Audio recording capacity is about 15MB per camera per hour In order to save HDD space we suggest closing the audio except users mandatory require audio recording If you choose CBR recording the recording data will not differ from the bit rate option Notes When HDD is full the default set will let system overwrite the earliest recorded files 4 The attachments such as data cable power line and hard disk are prepared well Notes While installing please pay attention to the power cable connecting with hard disk Installation steps for model DVR7000 3 2 Package Checking After opening the box please check the host computer whether it is distorted or mangled If there have please do not use it and contact your suppliers in time Meanwhile please check all accessories of the host computer do read the attached information carefully Notes Accessories as for the packing list Ill User Manual 3 3 The Back Panel Instructions of Host Computer a ps 3 3 1 The Back Panel chart for DVR7000 1 DVR7016V voc Net DVR l 2 D
35. does my system restart after self check 04 1 Check the hard disks if they are in FAT32 file format if not change to FAT32 2 Check Color System setting in Record Parameter menu In case this setting is PAL while present video input is in NTSC format which will cause system restart 3 Please unplug the network cable to see whether DVRs run normally since there are serious problems of the network which may also cause the host to restart repeatedly p 05 Why my remoter doesn t work 05 1 Please check if the IR indicator light on the front panel flashes when you make operations with the buttons If not please check whether the remote control has run out of battery or the remote control has been damaged 2 Check if the front panel is in lock up status If so press Login Lock button and input power password to unlock 3 Please check if the host software locks the operation If yes please input user name password to login so to make IR remoter control work 06 Why system halts at some certain time dir os In case system halts at some certain time for example around 7 30am please check your electricity system This problem is mostly happened in factories when at around 7 30 all machines start and cause power supply in a short temporarily Try to make the DVR not connect to the same circuit as the industrial machines os B Display Problems 01 Why there is nothing displayed on the monitor or the display keeps shaking 31
36. e setting wouldn t take effect 9 G 9 O until you move the cursor to confirm press Confirm 3 Click the Enter key to save up after the setting Click Cancel if user 9 D D close not want to save it Note Once the manual record is started it will keep record until being closed iii 4 4 2 Schedule Record Enter the setting interface with schedule record and login to system choose main menu Record mode gt Schedule record into the setting interface of schedule record The setting interface is as follows Move the cursor and select open icon to set up the schedule record for the corresponding channel If user selects close it means schedule record is not effected 4 4 2 1 Set Record Time Press save to enter the record time setting interface as below ins Net DVR lll Everyday Monday Tuesday Wednesday le Be Me Me He He He Re 00 00 k User can set up two regular time periods for time record of every day or set up two different periods for time record of every day in a week Attention The period wouldn t take effect until the corresponding day is selected For example If you want to select Everyday move the cursor to the corresponding icon and press ENTER Play red hook means open Otherwise close Attention The constitution of time period is according to the order of sequence time of each time period c
37. esistance at no useful alarm input entrance If the voltage measured in the probe that computer host supply is less than 11 V it will affect the normal alarm of probe and DVR at this time could be considered that add 12 V power line or a separate power supply for the probe to ensure that the system work properly en 91 om User Manual 12V power supply separately DVR NC C NE S MM Probe lou s su 12V GND Input Input2 Ue l When a separate power supply it is also conditional to connect the two ends otherwise long distance transmission may interfere and cause alarm misinformation If you use the probe series as many probes use a alarm input host computer will not be able to distinguish which one alarm Only pay attention to the need for a resistor 02 Net DVR 2 Alarm normally open connection If the probe is always open that means it is usually broken in order to ensure that the alarm input end is specific voltage from 12 V out of power after through the resistance to the alarm input end directly connect probe to the resistance directly if occurred the resistance was short on both ends then current comes out directly through 12 V after the alarm probe directly enter the alarm input end the voltage of alarm input end will become 12 V the alarm will occur Typical alarm normally open connection power supply from the probe is provided by DVR ov GND Input Input2
38. eters of each channel can be separately setup in two different time periods time l period 1 and time period 2 Move the cursor and choose a time period By press and you SM i i can adjust the time from 00 00 to 23 59 It ll restore to default settings if your setting is Seturstion es out of the time range Attention If there is some time overlap for the setting of time Hue D period 1 and time period 2 the system will accept time period 1 setting Channel 3 Seve Reset 2 Default Value Each channel video parameter in default status Note User can set the two time periods separately The setting of time period is for each day and time period should be set by sequence a 36 oo iss Net DVR Brightness contrast saturation hue Video parameter has 4 options brightness contrast saturation and hue and range is 0 127 Default status brightness 64 contrast 64 saturation 64 hue 64 Current channel When in multi channel display mode the current channel is the top left channel When in single channel display mode the current channel status is showing on the main screen After setup finished user can click Save to save configuration and click Reset to restore to default setting 4 3 Record Parameter The video parameters do not change with the record mode Therefore after user use DVR to record it is important to set the video parameter since it is related to the definition and the HDD
39. f the domain name can not be resolved please check whether there have similar notices that maintain server on the peanut shell site Please note that the following is news from the peanut shells site From August 1 2008 we will abolish the peanut shells embedded standard service sign business changes allowing only peanut shells professional services business services peanut shell level login to use embedded peanut shell For Windows Linux version any client does not be affected by the adjustment of the business About the introduction and upgrading ways of peanut shells specialty business service please log in to read the following address http www oray cn PeanutHull PeanutHull ProUser asp Il User Manual mm EEENI 4 6 PTZ Setup After logging in through main menu PTZ setup continual key press operation for entering settings interface as following In main menu gt system management gt serial port settings gt for serial port type please select RS485 serial and for serial device please select PTZ Save it and return to main menu main menu gt PTZ setup gt the choice of ball access channel select the appropriate agreements baud rate and address code for the ball 9 confirming the connection of the plus or minus connector correctly between positive and negative RS485 line with the hard disk recorder RS485 Note It could be controlled only when the
40. format and counterclockwise turn the wheel to shift the channels 2 When change the number rotate up means increasing the number and rotate down means decreasing the number ll User Manual 3 Rotate the trolley to select the word frame 4 After refresh the file data or file log move the cursor into file data or log frame then you can rotate the wheel to flip the file data or log 5 In playback clockwise roll the trolley to fast rewind and counterclockwise roll the trolley to fast forward Click mouse trolley If you click the trolley into input area there will be a flexible keyboard The interface is as following 1 0 4 sis ale 4B i 2 3 4 5 67 8 o of Sait y jejwE np 1 Y uv ofel C HH Caps A D F GH J KL ts gt par C s A ere fa ger Notes the GUI icons which support a flexible keyboard 1 Setup time for schedule motion and alarm record setup time for alarm output backup 2 Network IP setup user name and password setup DDNS setup 3 Channel name setup backup server name setup 4 Server serial number 5 Add and change user names 6 Password setup Net DVR l 3 6 IR Remote Control 1 2 3 4 5 67 91011 12 13 14 15 x ES e c e 2 PTZ 16 18 20 22 23 24 25 27 29 31 33 35 37 39 38 17 19 21 26 28 30 32 34 36 User Manual k BREE 3 6 1 Remote Controller Layout Keystroke instruction 14 WXYZ 15 Transfer 16 Log in
41. haracter in the position of upper left corner of the front panel 3 Jump the thread piece to put the legs 1 2 next to the resistance R 13 of U 13 to the status of short circuit 4 Connect the power supply and start the machine You can hear buzzer sounds and it indicates that the passwords have been set to the default value at the moment 5 Shut off the machine again and cut off the machine power supply 6 Pull out the jumping thread piece and let the legs 1 2 next to the resistance R 13 of U 13 to status of open circuit and then insert the 59 m Il User Manual jumper cap in the legs 3 4 7 Place back the case lid 4 8 7 Renew Default Reset system default set up way After login user can through SETUP gt Default interface to enter the port whether to restore system default setting as following Note Network management System time User account and Hard disk management wouldn t be influenced System default status is as follows We take DVR7016V as an example Display setup Display Contrast 5 1 Video Format PAL Overwrite mode Auto Display record mode Enable Mic Input MIC Auto Locking Enable Auto Lock Time 5 Minutes Image Poll Enable Polling intervals 15Sec Date Format Y M Display w Rec para w Vanua Schedule D Display Channel Name Enable Display Time Enable Temperature Open O terion rec Dalam res OFr Quse cw Chane Password Viceo para a 6
42. he network mapping on the dial up internet router Note The instruction is for TCP protocol mapping Through the router mapping Host network interface settings are as following Note The values of command port and HTTP port indicated by red box were 8101 and 80 Users can customize the value of the two ports After setting and saving DVR will restart to take the setting into effect Z oo e Auto acquire IP address Custon IP Address bel Multicast Fig 1 Take the TP LINK as an example WAN WAM Pert Wi Comortios Type Hau Moree Password agoen VP Ahire ss domo P nier ote Subnet Mask OS pus MTU Stee n item Max hic Time QUAN Cip nie GEN Mee WANI Usa mam som _Comex J bisconnected GiDmaririP Matat iF anon 000p 1000 0400 116 309 143 163 oo00 02800 1452 The c faatia 1450 de ro chatqe weas necessary minutes Ch reas remain stos s af limes Cormmerctan Demari C Soest Aut abeally O Commit Narya Fig 2 Net DVR Il 1 After signing up routers by choosing Running Status icon on left side menu of Figure 2 view the LAN IP and WAN IP address of the routers such as the LAN IP address 192 168 2 1 WAN IP address 116 30 143 163 2 Choose the Transfer Rules on Figure 2 left menu as shown in Figure 3 respectively input command port 8101 HTTP monitor port 80 IP Address 192 168 2 6 a
43. icates the mask area Yellow color indicates no mask Press the cancel button to cancel the operation Each channel only supports on mask area Return to channel setting interface you can choose mask or no mask at the right option frame 4 8 3 Serial Port settings After log in user can through System Management gt Serial Port Settings continually key press operation enter serial port settings interface the interface is as following a 54 ome ins Net DVR lll DVR Number Default Value 33 Button Lock Use for lock the remote control See details in 4 1 1 Remote Control lock and unlock Serial port Type RS485 Serial port Mode full duplex semi duplex DVR Serie Port Address Set the corresponding address code for serial keyboard D Note PTZ address should be set in PTZ setting interface Ousl plex ne 4 8 4 Alarm Output After login user can through System Management Alarm Output enter the following interface 5 iil User Manual m DEBE Alarm output interface respectively have the following options Alarm window maximize buzzer alarm output alarm output set alarm output deployment time O Alarm to fullscreen When the system was in the state of the multi screen video the system detected the report warning channel will turn to full screen image automatically O Buzzer alarm output When alarm triggered the system will e
44. ill can not login successfully please confirm the above user name and password or repeat checking A gt F steps If you can not login please uninstall the client program select new directory for installation and then implement A gt F steps again 06 I input DVR IP address user name and password in client manager software and system shows successfully connected to remote DVR but I cannot view the cameras Why 06 1 Please check if the computer has opened firewall protection If so close it or set the security level lower 2 Try to close open the Multicast function in host DVR When multicast data can t be received some devices fail to have images although user successfully log in 3 Check the model of your display card Some diaplay cards are not compatible with our products 77 li User Manual mm EDEN CL D Record video data and backup 01 Why my DVR system can t record audio 01 1 Please check if you have enabled Mute function 2 Please check the Record parameter setup window if you have enabled audio record 3 Check the audio cable if it is in good condition 02 Why I enable manual record but there is no recording data in the file list 02 1 Check if you have set the correct search mode Be sure that you have selected manual record mode to search the record data 2 Please make sure you have formatted the HDD before use the DVR The system only supports FAT32 format 03
45. ins Net DVR Preface Thank you for selecting our products We will offer the best service for you wholeheartedly This manual applies for DVR7000 and DVR7200 series and we will introduce DVR7016V as a sample In this series different product models configuration will have a little difference and it will work the difference between product function and operation It is for reference only We will not provide any new information separately for later firmware update The updating files will be added into the new edition of the user manual and will also be posted on our website in the download center This user manual may have some inaccuracy or misprint We sincerely hope your timely feedback and comments to let us correct and improve this booklet in the subsequent edition Il User Manual m EEEE CONTENT Preface EE 1 Chapter 1 Brief Introduction about the DVR EEN 6 T I Summari zati eene rH ene A eae sets telis ns n Ere ye iat RH en REOR ded 6 1 2 Product 1nt OdUctiOn Eegen Imi IO isa IR aves 7 Chapter 2 Technology Guideline and Main Functions EEN 8 2 1 Technology Guide lime oce ete ed e UTER A e sr E 8 2 2 Mam Functions eode OUR IDEE EN MEME I NI eee at sean eH Xem Chapter 3 Equipment Installation and Illustration ENEE 13 3 1 Installation Environment and Cautions 3 1 1 Attentions on Installing Hard Disk 3 2 Package Checkout id 3 3 The Back Panel instructions of Host Computer 3 1 The Back Panel char
46. ization Move the cursor to the function icons and confirm it After the new user information is added move the cursor to Add icon and press confirm Attention system supports 16 users and that means admin is allowed to add 15 users at most User modify Only the administrator admin identity can modify users function authority and delete users Users can only modify their own password The method of modifying and deleting users is to move the cursor on the account name in User account list and press ENTER once to select it Il User Manual T Verben jid T m User Acad iii Channe prisas s L 606000006 word etn BELL m SEE NE Law 21010 OL OLOLOLC 66006006 ialse Basis 0660600006 1 Loca Display Rec para Schedule Notion rec Preview Para Playback Backup L u d Alarm rec Network PTZ Disks Log Talk Uparade System Sys info Nanua e Playback Backup Video para Clear alm User IP User MAC h hk A After having a revision to the user s permission operation move your cursor to modify button and press OK button to save preserve and click Back button to go back to the higher level menu 2 User delete Please note only the administrator who can use admin to login has right to delete users If you want to delete a user choose the user s name in Account list and focus on Delete and press ENTER Return t
47. k should be larger than 512M and the format is FAT32 If you want to format the U disk please enter the disk management detailed refer to 4 7 disk management The details for U disk refer to 4 11 backup operations 3 3 4 Network Interface There is a RJ45 10M 100M adaptive Ethernet interface which is used to connect the PC and the DVR The indicator lights ACT and LINK are used to indicate current network status LINK Network speed indicator on 100M off 10M ACT Send Receive data indicator Blink Sending Receiving data Notice When you connect the computer s network card with the host computer please use the cross line when the exchange machine connect the computer please use the parallel line Il User Manual mm EEEBNI 3 3 5 Alarm Input Output Connection Alarm input Input resistance 22K Q Window contrast voltage 3 0 V 4 18 V Note there will be alarm when the voltage between 0V 3V or 4 18V 12V and no alarm when the voltage between 3V 4 18V Alarm output DVR7016V relay mode output 120VAC 1A 24VCD 1A Normal relay open Alarm output relay close Sensor power The machine provides a 12V DC power output port The connection of sensor for alarm please refer to appendix 3 3 3 6 RS 485 Connection Attentions for PTZ decoder connection 1 Confirm that the PTZ decoder and Net DVR are one point ground connected or common mode voltage might exist to cause the PTZ invalid 2 Prevent high voltage inroad
48. l close working modes iil User Manual m DEBER 1 In case your sensing equipments are of high power consumption to avoid damaging the alarm output module please make relay extension connection 2 In case you are using high frequency equipments e g High frequency lights please make relay extension connection method or alarm module may not work properly 02 How to connect multiple PTZ cameras or PTZ devices 02 1 Please make connection in star method Connect multiple controlling lines RS485 in parallel connection and set addresses properly 2 Bus connection Connect 485 and 485 to the DVR s 485 and 485 pins and connect the next DVR s 485 and 485 to the first DVR s 485 and 485 You may need to add a terminal resistance Please read the P T unit manual 03 I opened motion alarm and sensor alarm but I got misinformation frequently Why lr 03 Please check and set motion detection sensitivity properly Motion detection is sensed motion by light intensity In case you set it very high sensitivity day amp night changing may trigger an alarm 04 How to clear the alarms 04 Under the status of login you can clear the alarms by pressing the Clear button on font panel or Alarm Clear key on the IR remoter or by clicking Alarm Clear in the menu using mouse If the host DVR is locked please login first 05 Why I cannot control PTZ devices e g speed dome lr 05 1 please check if y
49. les exist in it in The interface is as below current month Move the cursor onto a log line and this item can be amplified and shown on top of the log frame Attention The figure next to the Log means the quantity of all logs in a day System can store 1024 items for a day at most The log files can t be recognised by PC The log information of host Net DVR can be searched and checked in client manager The log information includes system start up shutdown logs firmware version upgrade logs alarm logs PTZ control logs user login logs logs of system parameters changes playback logs backup logs HDD format logs and client user login logs etc 4 9 5 Alarm Status oe6000000000009000 000 0000 The alarm status fig is shown as follow as 16 channel the sample ete ee It shows the warning information of three alarm types of each channel 0000000000000000 Sensor Alarm Motion Alarm and Video Lost Alarm You can clear the alarm through the CLEAR button of the remote controller front panel on Net DVRs or mouse c 64 oom ins Net DVR 4 10 Playback e There are two ways of playback 1 Time search playback Press the playback key on remote control or the playback button on front panel or right click the mouse to get the record log and then select the files for an accurate time to playback 2 Category search playback After login press Play button to get the Playback interface
50. liquid or metal into machine that may cause short circuit or fire Don t record or playback until at least one HDD is installed Short circuit would happen when moist dust is on the board so user has to termly brush the board and other accessories to make the machine work in good condition Video audio RS485 devices cann t be plug or draw when the power is on or else the equipment will be easily damaged Use the power on off button on the front panel instead of direct shut off the power directly when turn off the Net DVR so that the hard disk won t be damaged After installation machine can automatically detect hard disk If an unformatted hard disk is detected system will give off information whether to format the disk For a used dick please delete the used partition in PC or system meight have errors The system only supports FAT32 file format When hot swap the SATA hard disk please plug in out the data cable and power cable together Q In order to keep the integrality of the records damaged disks should be exchanged promptly There is information about the error of the disk in the logbook emm 14 we Net DVR ll 3 1 1 Attentions on Installing Hard Disk 1 Recommend high speed hard disk above 7200 rpm 2 The capacity of the single hard disk is above 32GB at least and there are no limits for the largest capacity 3 The selection and calculation for capacity Total capacity channels number record time neede
51. m maximally saves HDD capacity and for net transmission the bandwidth is also maximally utilized The main characteristic for VBR is the video quality keeps constant but the compression bitrate changes in compliance with image sources The setting for bitrate level should be within the compression bitrate limitation Fixed video quality 6 level video quality is provided Level 1 is the highest and playback image is the best but the HDD occupation is largest The system default setting is in level 2 Note When the stream type is set to fixed video quality set up the stream does not affect playback quality Encoding stream Different steamrate can control the data transmission flux There are 100K 128K 256K 512K 1M 2M 3M 4M eight stream rate options Note When user select CBR or VBR the bitrate will influence playback quality Video quality There are six levels of video quality 1 2 3 4 5 and 6 and the video quality would decrease according to the increase of the numeral Audio The on off switch for audio Tick off indicates open otherwise means off a 38 oo iss Net DVR l O Dual streams 1 The parameters of local stream are for main stream The local stream parameter settings affect the recording main stream and network main stream 2 The parameters of net stream are for sub stream The net stream parameter setting affect network sub stream O Reset channel User can click Reset button
52. nable buzzer alarm Alarm Output Time 0 300 Sec system default is 100 Sec Alarm output number and deployment time Select 1 2 alarm output set up the output deployment time the system default the warning output deployed time as daily 00 00 23 59 that will open 4 8 5 User Management After login user can through System Management Accounts enter the user account port the fig is as follow If you select the Display the user list when login you can use the buttons to select the user name instead of input character by character If Display the user list when login is not selected you need input user admin user name when login w Display the user list when login a 56 oo 1 User add modify Net DVR Il User add Only the administrator admin has the right to add or modify user accounts When system is at the User Account port press the Add icon to enter the Account add modify interface as follow Attention System user authority has 2 kinds Local and Remote T usor agamoaiy Bil gt T s User AddModiy LI 6006066666 j mm 660060060066 Motion rec Alarm rec Network De Disks Rec para Schedule Preview Para Log Talk Display System Sys info Marvel Playback Backup w Video para Clear alm ITI Le 6060606606 LOT OI OLIO 6 666 O Playback Backup Upgrade The method of user author
53. o keep setting and the user is deleted 4 8 6 Password Setup and Password Default After login through System Management gt Password user can enter the power password interface The fig is as follow ins Net DVR lll There are two passwords in the power password interface Be sure that you press the ENTER button while focusing on the Save icon after modifying the password The explanation is as below Note User can not set the Power password the same as the Upgrade password 1 Power password Default value 000000 is used to verify the password when you start shut off the system or unlock the keystroke 2 Upgrade password Default value 666666 is used to verify the password when you upgrade the system via USB 3 Password restoration Before introduce the operation of password restoration there is another password that should be mentioned admin s password default setting is 888888 The password restoration will restore three system passwords the power password the update password and the admin s password lock password and machine serial number When you forget the system password or the admin s password the factory s default setting can be retrieved by the following operation For safety the password restoration pins are hidden designed Shut off machine and cut off the power supply For DVR7000 1 Unload the cover screw and remove the case lid from the machine 2 Find U13 labels RESET c
54. on has the video data The lower left corner shows the date and access of all the video dates Four video types manual schedule motion alarm according to or switch types the default display all types of video data choose the time and channel after the video system to automatically refresh the data Move the cursor to data then clink Confirm to start replay the video Use or for crossing the page Multi channels playback 7004 7200 series except multiple simultaneous playback supports 1 2 3 4 maximum of four way road Search time intervals to choose whichever the ultimate channel is Note the system supports precise time like playback according to panel remote control or the right mouse button like quick button to show search video flame 4 9 3 Record Status The fig is as follows It shows the record status of each channel s current video and audio on or off and if in the status of recording the Type bar would show the type of current record There are 4 types MN manual TM timer MT motion detection AM alarm Gray means off and red means on And it also shows the quality and the audio of each channel When a channel is not in recording pr E i GIE CIF GIF cif ze e ia i ida in status the image quality shows 000000000000000 o 63 oo Il User Manual EEEEIN 4 9 4 Log Information V The date in green color on left indicates there are record fi
55. orner will switch to A User automatically and show the current user name Then you can carry on the operations in the authority to the system at the moment Note o jii 1 After click the main menu and image button on the front panel and g remote controller there will display the user login interface 2 Default User admin default password 888888 i User name admin 3 When you input the incorrect password 3 times continuously the system Password i l will alarm and get into the status of locking automatically In that case you need to click the clear on the front panel or remote controller to retype the com Bl conce password Note For the sake of safety please change the default password immediately 4 1 3 System Lock When the system is in the status of login if there is no operation in several minutes System default automatic lock time are 5 minutes You can only do the operations such as login set DN and switch scene format and so on at the moment 4 1 4 Main Menu After user log in successfully and click the MENU on the remote controller or the front panel the system will switch to main menu The main menu will appear as follows 33 Il User Manual EEEE Submenu Introductions 4 2 Display Setup Display setup is used to setup the Display Contrast Overwrite Mode display record mode auto Locking auto locking OSD ect After log in the system click Display
56. ou have connected 485 controlling line to DVR correctly 2 Please check DVR settings i e protocol baud rate are set the same as the PTZ device 3 Check whether the address code of the PTZ devices and the settings of DVR host channel are consistent or not Gf can not control can adjust forward or back one address code for testing 4 If several DVR hosts connect with a same PTZ the host must enable System Management gt Serial Port Setting gt Serial Port Keyboard on DVR host Note The host has over 30 kinds of commonly used protocols please patiently test whether your PTZ or high speed dome protocols can be used in our DVRs a oo m Net DVR Appendix 3 Alarm connection method 1 Alarm normally closed connection If the probe is normally closed meaning that the normal time is connected the plug at both ends of the probe just likes lead The voltage out from12V through the resistance and then connected to the alarm input this meets the needs of a specific voltage If the alarm occurred the alarm probe will cut circuitry is equivalent to disconnecting at this time and the voltage IT ELE EP E CES that entered the alarm input will be zero alarm action occurred DVR NC C Typical alarm normally closed connection method probe power supplied by DVR 12V GNDInputlInput2 E _ Note The alarm entrance that do not use should be closed in software otherwise need to connect the short r
57. quently asked questions amp answers If you cannot find solution here or the solution offered here still fails please feel free to contact us by our hotline and or technical support E mail box We will make most timely reply to your questions Testing Methods 1 Replace Method Replace the power supply and HDD of the DVR 2 Minimum Load Method Get rid of the HDD video audio and alarm resource 3 Upgrade Solve some incompatible problems Note Some problems may be caused by incorrect operation If you can not make sure the problems please run Reset default option eL A The problem about rebooting self testing system halted 01 Why the DVR doesn t start up though power cable is well connected to power source 01 1 Check if you have turned on the switcher on the back panel 2 Check if you have inputted the right power password and pressed Enter button 02 I see the Super DVR logo but why it stops at self check process 02 To detect if the problem is caused by hard disks please remove all the hard disks and start system again The DVR can start up without a hard disk After start up system will prompt system does not detect the disk information whether to continue Click OK button and the host can engage in normal operation 03 My system can finally start up but seems to be quite slow Why dir oo Hard disk error will take system much time on rechecking Il User Manual m EEEBNIE 04 Why
58. s shown in Figure 1 and choose to enable the agreement ALL Click the Save to save the settings Virtual Servers ID Service Port IP Addrazz Protocol 8101 19 1682 6 ALL a 182 108 2 5 Add New Enable Ai II Disable Al Fig 3 3 Port Description The command port is the TCP port of all DVRs communications and HTTP port is IE browser port Ill User Manual a When the two ports are default setting directly input the WAN IP address 116 30 143 163 shown in Figure 2 into client manager and sign in After login successfully the interface is shown as Figure 4 For IE browse directly input the WAN IP address 116 30 143 163 shown in Figure 2 and input the correct user name and password you can log in After login successfully the interface is shown as Figure 5 116 30 143 163 8102 4 ES rm Sa a fte 00000 o 10 es 0 ESAE os ee Fig 4 Fig 5 b when these two ports are not the default values for IE browser input as the following mode http 116 30 143 163 http port For client manager when login input the command port in the login box 66 99 Note between IP address and port number or between user name and port number the punctuation must be input ins Net DVR lll Appendix 2 Net DVR Q amp A Thank you for choosing our DVR series products We will always be at your services In case you have any difficulty while using the products please refer to the below fre
59. ser can through System Management Channel enter channel setting interface The fig is as follow iil User Manual o DEBEN The channel setting is used to modify the channel parameters such as channel caption video lost alarm for each channel and video full mask 1 Channel name The channel name can be established at most 16 Chinese characters or 32 English letter and numeral Except for front panel and remote control operation system supports flexible keyboard Users can click the mouse trolley to open and close the flexible keyboard Channel name fixed fold on the top left corner of the corresponding channel User can use on the remote controller or front panel to switch language Chinese input adopt zone bit code please refer to code table while inputting Note When copying the channels the channel names are not copied The default setting of channel name is CH1 CH2 CH3 CH4 2 Video lost alarm If video lost alarm of a corresponding channel is set to open V Open When the video is lost the DVR will warn in three different ways audio alarm buzz alarm and alarm out warn User can click Info to enter alarm status log and check the alarm information 3 Mask area setting Click and confirm the cursor EN into mask area setting Move the cursor and press it to choose a certain initial position Move the cursor and get the mask area and confirm it by pressing the button Green color ind
60. space of the recorded data After log on choose main menu gt Record mode into the setting interface of record parameters and the setting interface is as follows Channel Customer can select the channel by number key or by the mouse Record mode System has 4 record mode 1 Manual Record 2 Schedule Record 3 Motion Record 4 Alarm Record The priority is from low to high Whether some channel is placed in record status is decided by manual record schedule record motion record or alarm record If only satisfy 1 of those conditions the system will enable the recording of current channel Resolution Recording and playback resolution is CIF 352 288 D1 704 576 Encoding stream type Each bit rate type has different data capacity There are 3 kinds of the bit rate fixed video quality CBR VBR Customer can choose accordingly iil User Manual m DEBEN CBR The compression bitrate keeps constant even when image source changes The characteristic for CBR is in limited bitrate to have good compression images as well as easy to estimate the HHD occupation and network bandwidth VBR The compression bitrate is dynamically adjusted when the image source changes For instance when the video images are smooth the compression bitrate is adjusted in low level and when the video images are in big motion accordingly the compression bitrate is adjusted in high level Thus when recording syste
61. t for DV RI OOO rensningar NA a E THEE ERREUR PH NEUE HUE Ere aTe LITERE a eec edo vetet dote 16 3 32 Video Audio COnfiecLOTi asesinada dardo ais 19 3 3 3 USB Backup Connection EE 19 3 3 4 Network Inte TRAC ee NON 19 3 35 Alarm Input Output Connection ceteri Soe aed drei itle te epe sedie E AE Hr eee t eu chives TER S dore edge S EErEE e terere eco ope eod pectore ds 20 3 23 0 RS 485 e EE 20 iss Net DVR lll 3 3 7 Audio Input Port 35 4 Front Panel Descriptio oc uses er Otras a bu ER M et ex UH TA eege 3 4 4 DVR7000 Front Panel and Layout Description 3 5 MOUSE Ope PALO ad NICE LU e 23 3 6 IR R mot Control E 25 3 6 1 Remote Controller Layout Sef MED DIOS CLIP ELON EM EE D Pm 27 3 7 1 Menu System Str ct re Chartis te ee Ren THESES E AAA lease nat 27 3 7 2 MERO Option di e 28 Chapter ME PISCEM 4 1 Power On Off and Login Lock A eebe ee 4 1 1 Remote Controller Key press Unlock LOocK iue re ed 32 4 1 2System Login 4 1 3 System LOCK qu HE 33 AWA Mam MS mE M 4 2 Display Setup secsec 4 2 1 Video Parameters 4 3 Record Parameter 4 Record MOE eee Oan Ip secs A temet enim a e tonat ee 4 4 1 Manual Record 4 4 2 Schedule Record 4 4 3 Motion Record User Manual
62. t go on the wide area network by mapping User name The user name of the passport which is applied from www oray cn Password The password of the passport which is applied from www oray cn IP address After login successfully it will display the WAN IP address Domain name show the resolved domain under the premise of the host of wide area network connectivity ins Net DVR Operation input user name password choose log in automatically it will automatically go on resolving the domain name after dial up successful click save key to keep the status of logging in automatically Note The applied domain name needs to be activated in peanut shells site by analysis enter the user name and password just go on logging in as operation the system will automatically save the user name and password to log in next time that do not need to re enter Explanation Digital video recorders have hard drives of peanut shells embedded analytical capabilities that can achieve the analysis in the domain of the host side only need to input applied peanut shells passport user name and password on the network settings gt domain name analytic menu interface choose Save automatically log in and click Sign to resolve the domain name the user can login client end or Web browser for remote access and control by this domain name that has been resolved Note Due to the design of third party software i
63. thin the IP address column Use the following IP address If there is no service of starting up activated automatically assigned IP address in the LAN the system could choose using the following IP address to edit acting as a static IP address that the System appointed IP settings This IP must be unique It can t have conflicts with the IP of other servers or working stations in the same LAN Default IP is 192 168 0 6 when getting out of the factory Subnet mask code Used to differentiate subnet Default gateway Used to realize communication between different networks it needs to set up gateway address DNS server Input the DNS address acquired by PPPOE Command Port the port for Data transmitting with client Default set is 8101 It will take effect for amending the port needs to reopen the hard disk video recorders HTTP monitoring Port IE browse port Default set is 80 It will take effect for amending the port needs to reopen the hard disk video recorders After you change the HTTP port you should type http IP port for IE browse Multicast This function only affects UDP stream the main stream This function enables multiple clients connect to and visit the same channel of one server DVR Due to the limitation of the server source maximum 32 clients can visit the same channel of a server DVR simultaneously If this function is not enabled for a server DVR only maximum 32 channels image can be visited b
64. unit and manage the menu functions System also supports mouse hot plug Right click the mouse 1 If the system is in login status right click mouse and shortcut menu will display containing system menu record playback backup PTZ control alarm clear video parameter login and power off 2 If DVR is locked and in real time monitor status the login menu will pop out when right click the mouse The system default setting user name is admin and password is 888888 You can click the mouse trolley to choose a flexible keyboard 3 Once entering the menu right click the mouse it will let you exit the current interface and back to the former menu or exit the main menu Left click the mouse 1 Left click the mouse and you will enter the functional menu 2 In the main menu left click and choose the item to enter or set up the parameters 3 When selecting the motion detection set up left click the mouse to change the status of the motion detection square unit 4 In playback status left click the mouse to shift between play and pause 5 To set up the video images parameters you can change the brightness contrast saturation hue of the image by left click the mouse on a certain point you prefer 6 For data input left click the mouse and select the software keyboard it is the same as press the corresponding key on the PS keyboard Mouse Trolley 1 In real time monitoring clockwise roll the trolley to change the image
65. users 4 Video lost alarm motion detection alarm and sensor alarm can be transmitted to the external equipment such as mobile phone or fixed phone 5 Network alarm linkage alarm signal can be uploaded 6 Watchdog function When the system is abnormal watchdog automatically detects and reboots the system Exploitation Support Client manager software and client management SDK a 12 iss Net DVR l Chapter 3 Equipment Installation and Illustration 3 1 Installation Environment and Cautions stallation environment O Normal working temperature is 10 C 55 C Storage temperature is 10 C 70 C The equipment must keep horizontal either in installation or on using Avoid installing in high temperature or humidity conditions Heat release fans are placed for cool down so you should put the device on ventilated place The back of Net DVR should be placed 6cm away from the other device or wall while installing Moving the Net DVR between two places with high difference in temperature will shorten the using life Please install the lightning conductor when the machine is used in frequent thunder areas 13 om iil User Manual A EEEBNI Cautions Don t touch the power switch or the Net DVR by wet hands Make sure the machine and its case are grounded There is an earth interface on the back panel of the machine Keep the power supplier stable to avoid abnormal power cutoff Avoid dropping
66. vice After enable that function user can select Mic and Pickup and user can input device in interface LINE IN to carry out the page function Auto locking When you enable auto locking system will enter the status of locking in fixed time 0 10 min 0 min is unlocked and the default automatic lock time are 5 minutes If there is no operation in fixed minutes the system will be in the status of login automatically Il User Manual Auto switch Be uesd to start and stop auto image poll User can set the polling interval after you select this option 3 60s Note This function only takes effter after the system in lock status e OSD It can display channel name time and date optional It can adjust the date format There are two formats year month day month day year 1 real time If you select the channel name time date you will see the channel name on the left top corner of the screen and the time and date will display on the left bottom 2 record If you select the channel name time you will see the channel name on the left top corner of the screen and the time will display on the right bottom Press save to let the setting take effect Press reset to retrieve the default setting 4 2 1 Video Parameters User can set the brightness contrast saturation and hue After log on click the Video Para on the front panel to enter the following interface Tine period 1 00 00 23 59 e Time period 1 Param
67. y clients Red color means this function is enabled iil User Manual m EEEE 4 5 2 dial up settings After entering a network settings interface choose the dial up settings to enter dial up interface as the right graph shown Dial up setting is one of the ways to connect internet The system can connect internet by dialing up ADSL directly User name ADSL account user name Password ADSL account password Connect After you input the correct ADSL account and password focus the cursor on the icon and press ENTER to connect the WAN Auto Connect If you select this option system will automatically connect the WAN after disconnection Save password If you select this option system will automatically save the ADSL password Other information It shows the network information of the pubic network after the ADSL connection succeeds Click the ENTER key to save the current status of automatically replay when drop the line presently and saving password option Note When user name for ADSL is input and the net is connected system will automatically save the user name for next time using 4 5 3 DDNS After entering Network Settings interface select DDNS for entering the DDNS interface as the following right graph Our DVR system support domain name analysis function which can analyze the address that directly dial to the wide area network which can also analyze the address tha

ＮｅｔＤＶＲ - บริษัท E-Com A

Contents

Download Pdf Manuals

Related Search

Related Contents

Ｎｅｔ ＤＶＲ - บริษัท E-Com A

Contents

Download Pdf Manuals

Related Search

Related Contents

ＮｅｔＤＶＲ - บริษัท E-Com A