Philips AZ2536 VCD CD Soundmachine
Contents
1. e The lens of the CD player should never be touched e Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to cloud over Playing a CD is then not possible Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates e Use only Digital Audio CDs e To take a CD out of its box press the centre spindle while lifting the CD Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust e To clean the CD wipe in a straight line from the centre towards the a vans ant edge using a soft lint free cloth Do not use cleaning agents as they ua fv may damage the disc e Never write on a CD or attach stickers to it TAPE DECK MAINTENANCE To ensure a good recording and playback of the tape deck clean parts A and show in the diagram below after approx 50 hours of operation or on average once a month Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck e Open the cassette holder by pressing STOPeOPEN E A e Press PLAY lt and clean the rubber pressure rollers e Press PAUSE II and clean the magnetic heads A and also the capstans 8 e After cleaning press STOPeOPEN E A Cleaning of the heads can also be done by playing a cleaning cassette through once 23 Engli2. Helpful hints Programme mode is not available whenever PBC mode is switched on The menu structure depends on the programme stored on the VCD Please refer to the information supplied with the disc Pause 1 During playback press PII to have a still picture on the TV screen The sound will be muted On TV screen PAUSE will be displayed 2 Press PII again to continue playback Goto 1 Press GOTO on the remote control On TV screen GOTO will be displayed 2 Press digits 0 9 on the remote control to key in the disc time which you want the disc to begin playback Helpful hints The disc time entered should not be greater than the total disc time Goto mode is not available whenever PBC mode is switched on Slow 1 Press SLOW on the remote control to watch a VCD at a slower speed There are 4 types of slow modes to select The sound will be muted On TV screen SLOW 1 2 SLOW 1 4 SLOW 1 8 or SLOW 1 16 will be displayed 2 To resume playback at normal speed press SLOW repeatedly until PLAY appears on the TV screen or press Pll CD VCD MP3 CD A gt B repeat This feature is also applicable to audio CD except for MP3 CD To Play a certain scene or passage of the disc repeatedly 1 Press A gt B on the remote control during playback to mark the start point of the chosen scene or passage gt REPEAT A will appear on the screen 2 Press A gt B again to mark the en
3. AC power plug for 30 seconds and switch on the system again Adjust the volume Make sure the MP3 CD was recorded within 32 320 kbps 128kbps preferably with sampling frequencies at 8 48 kHz 44 1kHz preferably Reduce the distance between the remote control and the system Insert the batteries with their polarities signs aligned as indicated Replace the batteries Point the remote control in the direction of the system s IR sensor
4. Before viewing the Video CD ensure that the set is switched to corresponding PAL or NTSC system of your TV set exception Multi system TV BATTERIES NOT SUPPLIED Whenever convenient use the mains supply if you want to conserve battery life The battery supply will be switched off when the set is connected to the mains Make sure you remove the plug from the set and wall outlet before inserting batteries Batteries 8 x D cells R20 UM1 1 Open the battery compartment and insert six batteries type v NA R20 UM1 or D cells preferably alkaline with the correct polarity as indicated by the and symbols inside the compartment aa a fl Imami Remote control Open the battery compartment and insert two batteries type AA R6 or UM3 preferably alkaline 2 Replace the compartment door making sure the batteries are firmly and correctly in place 3 Remove the batteries if they are exhausted or if they will not be used for a long period The incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst Therefore Do not mix battery types e g alkaline with zinc carbonate When inserting new batteries replace all at the same time Remove the batteries if the set is not to be used for a long time Helpful hints The battery supply is switched off when the set is connected to the mains TV scree
5. N SELECTING A DESIRED TRACK PASSAGE To select a desired track e Press e lt or on the set repeatedly or use digits O 9 buttons or press Mt Pl on the remote control until the desired track appears on the display e f playback is stopped press HI to start playback To search for a particular passage during playback e Either press and hold or on the set for 1 second and then release te or i to select the passage or press aor gt gt on the remote control and then press II to select the passage During searching the volume will be muted For MP3 CD only To select a desired album e Press ALBUM PRESET on the set repeatedly or press A or V on the remote control until the desired album number appear on the display gt AX x will be displayed On TV screen the arrow will move forward backward in the ALBUM menu To select a desired track e Press e lt or on the set repeatedly or on the remote control press Mi Pl to select a desired track from the current album X X X will be displayed On TV screen the arrow will move forward backward in the TRACK menu e Use the digital keys on the remote control to select the track under current album directly For VCD only e Either press lt 4 or gt gt on the remote control repeatedly to select fast search speed x1 x2 x3 or x4 or press amp hold or i on the set for 1 second and then release ma
6. or i to select fast search speed x1 Repeat this step to select other speed x2 x3 or x4 15 English CD VCD MP3 CD ysi 6uq PROGRAMMING TRACKS Programming tracks of disc is possible when playback is stopped Up to 20 tracks can be stored in the memory in any order 1 In stop mode press PROG to enter program setting PROG will start flashing and PE i will be displayed On TV screen PROG program list 5 lines per page will be displayed 2 Press 4 or use digits 0 9 or press 4 gt i on the remote control to select the desired track e MP3 CD mode only First press ALBUM PRESET once or more or press digits 0 9 or A V on the remote control to find your album press PROG to store the selected album and then press lt lt i or use digits 0 9 or press M Pl on the remote control to select the desired track 3 Press PROG to confirm the track number to be stored gt Display shows Uc indicating the next program location available 4 Repeat steps 1 3 to select and store all desired tracks gt Display FULL if you try to program more than 20 tracks 5 Press PII to play the programmed tracks e f you select REPEAT REPEAT ALL during program playback the current track or all programmed racks will be played repeatedly REPEAT REPEAT ALL icon and PROG will appear on the display Reviewing the program In the stop position press PROG repeatedly to see your stor
7. 5 KEY KEY changes the VCD key tone to suit to your vocal range L R ST selects channel left channel right stereo sound or selects a language in a bilingual VCD 417 A gt B plays a certain scene or passage repeatedly for CD VCD operation only NTSC PAL selects the video output for NTSC or PAL system ZOOM for VCD operation only ZOOMS in or zooms out pictures PBC PLAYBACK CONTROL switches on or off PBC mode for VCD version 2 0 only RETURN returns to the previous MENU level during playback for VCD with PBC on 22 W stops playback or clears a programme 3 P I starts or interrupts playback V album down selects previous albums for MP3 CD only MAX selects special bass enhancement on off A album up selects next albums for MP3 CD only PROG CD VCD MP3 CD programme tracks and reviews programmed songs FM MUW programs preset radio stations 7 2 IG w 8 800981 PHILIPS POWER SUPPLY IMPORTANT For best CD MP3 CD VCD playback please plug in your set to an AC power supply where convenient If operated in DC mode see below approximate playtime Playtime is also varied from different brand batteries Battery type Playtime Alkaline approximate 9 hrs Zinc Carbonate approximate 2 hrs The CD part of this system also serves as a Video CD player if you connect it to your TV set
8. TTE RECORDER CASSETTE PLAYBACK Cassette playback 1 Select TAPE source Display shows FLAY throughout tape operation 2 Press STOP OPEN E A to open the cassette door 3 Insert a recorded 4 Press PLAY 4 to 5 To interrupt playback press PAUSE II To resume press this key again cassette and close the cassette door start playback 6 By pressing SEARCH lt lt or on the set fast winding of the tape is possible in both directions 7 To stop the tape press STOP OPEN m A e The keys are automatically released at the end of a tape except if PAUSE H has been activated CASSETTE RECORDING General information on cassette recording e Recording is permissible insofar as copyright or other rights of third parties are not infringed e This deck is not s uitable for recording on CHROME IEC II or METAL IEC IV type cassettes For recording you should use NORMAL type cassettes IEC I on which the tabs have not been broken e Check and tighten slack tape before use with a pencil to avoid jamming the deck machanism e The recording level is set automatically Altering the VOLUME MAX SOUND or BASS MID amp HIGH controls wil Helpful hints not affect the recording in progress No recording will take place during the 7 seconds in the beginning of the tape e To prevent the accidental erasure of a recording keep the cassette side to be safeguarded in front of you
9. VCD MP3 CD Soundmachine user manual manuel d utilisation manual del usario E HF AZ2536 PHILIPS Mexico Es necesario que lea cuidadosamente su instructivo de manejo PRECAUCI N ADVERTENCIA No abrir riesgo de choque el ctrico ATENCION Verifique que el voltaje de alimentaci n sea el requerido para su aparato Para evitar el riesgo de choque el ctrico no quite la tapa En caso de requerir servicio dirijase al personal calificado NOM i NYCE Descripci n Radio grabadora AM FM con reproductor de CD Modelo AZ 2536 01 Alimentaci n 110 127 220 240 V 50 60 Hz Consumo 24W Importador Philips Mexicana S A de C V Domicilio Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Localidad y Tel Edo de M xico C P 52784 Tel 52 69 90 00 Exportador Philips Electronics HK Ltd Pais de Origen China N de Serie LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO N AVISO IMPORTANTE Philips Mexicana S A de C V no se hace responsable por dafios o desperfectos causados por Maltrato descuido o mal uso presencia de insectos o roedores cucarachas ratones etc Cuando el aparato no haya sido operarado de acuerdo con el instructivo del uso fuera de los valores nominales y tolerancias de las tensiones voltaje frecuencia ciclaje de alimentaci n el ctrica y las caracter sticas que deben reunir las instalaciones auxilia
10. and break out the left tab Recording on this side is no longer possible 21 English CASSETTE RECORDER ysij6uq RECORDING FROM THE RADIO 1 Tune to the desired radio station see Tuning to radio stations 2 Press STOP OPEN H A to open the cassette holder 3 Insert a blank tape 4 Press RECORD to start recording 5 For brief interruptions press PAUSE Il To resume recording press PAUSE II again 6 To stop recording press STOPeOPEN m A CD SYNCHRO START RECORDING 1 Select CDeVCD 2 Insert a CD and if desired programme track numbers 3 Press STOP OPEN H A to open the cassette holder 4 Insert a blank cassette 5 Press RECORD to start recording Playing of the whole disc or programme starts automatically from the beginning It is not necessary to start the CD player separately 6 For brief interruptions press PAUSE I To resume recording press PAUSE II again 7 To stop recording press STOPeOPEN HN A To select and record a particular passage within a track 1 Press and hold SEARCH ma or i on the set to select a passage 2 Put the CD player in PAUSE II position at the selected passage Recording will start from this exact point when you press RECORD KARAOKE Microphone mixing Connect microphones not supplied to the system to sing along with the music source 1 Co
11. atch the local voltage 110 220V before plugging in the set 15 Battery door opens the battery compartment AC MAINS Socket for power cord aD AUDIO VIDEO SOCKET connects to a TV set REMOTE CONTROL 0 switches the set to standby on if set operating on AC power Switches the set off only if it is battery powered DIGITS 0 9 CD VCD MP3 CD selects a track number numbers consisting more than 2 figures must be keyed in within 2 seconds MODE selects different CD VCD MP3 CD play modes e g REPEAT or SHUFFLE order or CD VCD MP3 CD searches backward or forward FM MW tunes to radio stations VOL adjusts volume or equalizer level English CONTROLS ysij6uq H gt CD VCD MP3 CD selects previous next tracks FM MW selects a preset radio station EQ selects bass mid and high frequencies VIEW scans through a VCD with 9 pictures display on TV screen Only when PBC mode is switched off for VCD operation only OSD switches on off the on screen display on the TV screen SLOW watches a VCD at a slower speed for VCD operation only a RESUME resumes playback in stop mode 2 GOTO starts playback at any chosen time on the disc for CD VCD operation only and PBC mode is off 413 MIX SEL selects disc format CD MP3 CD in a mixed mode disc ECHO ECHO adjusts the VCD echo level for karaoke after you inserted a microphone 1
12. cant sound quality Recording and Playback It is recommended to set your recording bit rate to 128kbps sampling frequency at 44 1kHz to achieve CD like music playback quality Since downloading MP3 files from the Internet ripping songs from your own legal CD s and burning MP3 songs onto a CD R are a delicate process the quality of a MP3 song may vary by these process Subsequently making a MP3 CD may not be entirely perfect As a result of the above imperfection you may experience an occasional skip while listening or an occasional delay in accessing previous next title to MP3 CD s This is considered to be normal A comparison chart is enclosed as below Sound Bit Rate Approximate Approximate total Comment Quality Reduction Ratio MP3 CD time MW radio 32kbps 40 1 40 hrs Sound quality significantly FM radio 64 kbps 20 1 20 hrs affected not recommended Near CD 96 kbps 15 1 15 hrs Balanced sound quality CD like 128 kbps 10 1 10 hrs compression rate CD 256 kbps 5 1 5 hrs Compression rate low CD 320 kbps 3 1 3 hrs suggest to play CDs instead CONTROLS SUPPLIED ACCESSORIES Remote Control 1 pc AC Power Cord 2 iocesorramegi 1 pe Audio Video Cable 1 pe TOP AND FRONT PANEL LCD Display shows the status of the set dB meter to indicate bass power 3 STANDBY ON switches the set o
13. d of the chosen scene or passage REPEAT AB will appear on the screen gt The selected scene or passage will start playing repeatedly 3 Press A gt B once more to return to normal playback REPEAT AB will disappear from the display Helpful hints You can also cancel A gt B repeat by pressing Mor P The A gt B repeat marking can only be set within the same track Resume e n stop mode press RESUME on the remote control to start playback again from where you have stopped Helpful hints Resume will not be available if you have changed the disc opened the disc tray or disconnected the system from the power supply View This feature allows you to scan through a VCD for a quick review PBC mode must be switched off 1 In stop mode press VIEW on the remote control to go to disc view function On TV screen up to 9 pictures will be displayed If a menu consists of more than one page press M or PI to view the previous next page The first several seconds of each track will be played To exit review mode press digits 0 9 to play the desired track or PII to play the current selected track 2 In playback mode press VIEW on the remote control to go to track view function press Mor Di to select the track gt On TV screen up to 9 pictures within the track will be displayed The first several seconds of each picture will be played To exit review mode press digits 0 9 to play the desired pos
14. ed track numbers The display first shows the number of program location and then the number of the track stored here For MP3 CD only The display first shows the number of program location and then the album number for the track stored here To see the track number press PROG again Erasing a program You can erase the contents of the memory by e opening the CD door e selecting FM MW or TAPE sound sources e pressing W twice during playback or once in the stop position PROG disappears CD VCD MP3 CD SHUFFLE You can play all the tracks in random order 1 During playback press MODE once or more SHUFFLE tracks of the entire CD are played in random order SHUFFLE and REPEAT ALL repeats the entire CD in random order 2 To select normal playback press MODE repeatedly until the various modes are no longer displayed You can also press the W to cancel your play mode in playing REPEAT You can play the current track the program or the whole disc repeatedly 1 During playback press MODE once or more REPEAT plays the current track continuously REPEAT ALL repeats the entire CD program 2 10 select normal playback press MODE repeatedly until the various modes are no longer displayed You can also press the W to cancel your play mode in playing VIDEO CD Adjusting the TV System Before viewing the Video CD ensure that the set is switched to correspondin
15. g PAL or NTSC system of your TV set except for Multi system TV 1 On the remote control press NTSC PAL to switch between NTSC and PAL TV system OSD On Screen Display If you insert VCD CD your TV screen will serve as an additional display for messages e g PLAY STOP and information stored on the VCD CD e Press OSD on the remote control to select viewing various information The elapsed time remaining time in the track disc SINGLE REMAIN TOTAL REMAIN and EQUALIZER bars appear on the display Helpful hints For a MP3 CD TOTAL REMAIN s not available For a VCD SINGLE REMAIN js not available English CD VCD MP3 CD ys 6uz VIDEO CD Playing a Video CD with PBC VCD with PBC Playback Control will be indicated of the set and on your TV screen as soon as they are inserted PBC is a predefined play sequence stored on the VCD 1 Switch on the TV insert a VCD with PBC 2 Menu appears on the TV screen lf the menu consists of a list of titles you can select a sequence directly 1 Press digits 0 9 on the remote control to select your choice The VCD starts playing of the selected sequence automatically 2 Press RETURN on the remote control to go back to the previous menu Helpful hints If a menu consists of more than one page press Mi or to go through the pages Switching off PBC e n stop mode press PBC On TV screen PBC OFF will be displayed shortly
16. ition within the track or PH to play the current selected position Helpful hints If the disc is AVCD disc and there re no video tracks on the same viewed page cannot use the direct digital key to play the track Return e Press RETURN on the remote control to return to the previous VCD disc MENU level It is functional only for Video CD when PBC is switched on English CD VCD MP3 CD ysi 6uy L R ST You can use it to select the different audio modes e Press L R ST on the remote control repeatedly to select the following modes 0 305 090 o elLco represents channel left channel right dual channel on a bilingua VCD or mono left mono right stereo on single language VCD PLAYING A MIXED MODE DISC This set can play a mixed mode disc mixture of audio CD and MP3 CD mixture of other combination may not be operated normally 1 As default audio CD tracks will be read first will be displayed TV screen MIX CD DA will be displayed 2 Press MIX SEL on the remote control repeatedly to select other disc modes ni Ir LILI l tl UICC e MP3 CD gt MP3 is displayed BEETHO S MP3 TV screen MP3 menu is displayed Ez mi 01 BEETHOGO MP3 Sa Helpful hints For protected CDs MIX CD DA is displayed on your TV screen even if the disc does not have other format The MIX SEL normal functions are not available for protected CDs 20 CASSE
17. n is disabled during CD MP3 CD playing if your AZ2536 is battery powered Batteries contain chemical substances so they should be disposed of properly English POWER SUPPLY ysij6uq MAINS 1 Check if the mains voltage as shown on the type plate on the bottom of the set corresponds to your local mains voltage Select 110 or 220V by the selector for some version only 2 f your set is equipped with a voltage selector adjust the selector so that it matches with the local mains 3 Connect the mains lead to the AC MAINS socket and the wall socket The set is now ready for use 4 To switch off the mains supply completely pull the mains plug ou of the wall socket Disconnect the mains lead when you change over to battery supply or to protect the set during heavy thunderstorms The type plate is located on the bottom of the set CONNECTING TO YOUR TV SYSTEM Rear of TV example only GENERAL OPERATION SWITCHING ON AND OFF 1 Press STANDBY ON on the set to switch on 2 Press SOURCE once or more to select your desired function CD e VCD FM MW TAPE 3 Press STANDBY ON o to switch the set to standby Helpful hints To change from TAPE to CD VCD FM or MW source or when you are switching off the set first make sure you press the tape STOP m key to end playback and all the cassette keys are released The tone sound se
18. n off VOLUME adjusts volume or equalizer level SOURCE selects sound source for functions CD VCD FM MW TAPE M 3 5 mm stereo headphone jack Helpful hints The speakers will be muted when headphones are connected to the set Cassette recorder keys PAUSE II pauses playback or recording STOP OPEN H A opens the cassette compartment stops the tape SEARCH lt lt fast winds rewinds tape PLAY 4 starts playback RECORD starts recording OPENeCLOSE press to open close CD door 2 MIC jack to connect microphones VOL adjust the mixing level for karaoke ALBUM PRESET MP3 CD selects previous next albums FM MW selects a preset radio station SEARCH ma gt gt CD MP3 CD searches backward or forward skips to the beginning of a current track previous later track FM MW tunes to radio stations Pil starts or pauses CD playback E stop CD playback erases a CD program 1 IR SENSOR infrared sensor for remote control 2 EQUALIZER selects bass mid and high frequencies PROG CD VCD MP3 CD programs tracks and reviews the programmed songs FM MW programs preset radio stations MODE selects different CD VCD MP3 CD play modes e g REPEAT or SHUFFLE order MAX SOUND actives or deactivates the optimal mix of various sound features BACK PANEL 413 Telescopic aerial improves FM reception Voltage selector some versions only adjusts to m
19. nnect microphones to MIC e Before connecting the microphone set the microphone level with VOL to the lower level to prevent howling sound 2 Select VCD and press Pil to start playback 3 Adjust the volume level of the source with VOLUME control 4 Press ECHO to adjust the ECHO level to the desired mixing level 5 Start singing or talking through the microphone 6 Press KEY to select key tone if necessary Helpful hints Keep the microphones away from the speakers to prevent howling Microphone mixing only available in VCD mode 22 MAINTENANCE amp SAFETY SAFETY INFORMATION e Place the set on a hard flat surface so that the system does not tilt e Do not expose the set CDs batteries or cassettes to humidity rain sand or excessive heat caused by heating equipment or direct sunlight e Always shut the CD door to keep the CD compartment dust free To clean dust the compartment with a soft dry cloth e Do not cover the set Adequate ventilation with a minimum gap of 15 cms between the ventilation holes and surrounding surfaces is necessary to prevent heat build up e The mechanical parts of the set contain self lubricating bearings and must not be oiled or lubricated e To clean the set use a soft slightly dampened chamois leather Do not use any cleaning agents containing alcohol ammonia benzene or abrasives as these may harm the housing CD PLAYER AND CD HANDLING
20. or automatically Autostore Autostore Automatic programming will start from preset 1 or a chosen preset number The set will only program stations which are not in the memory already 1 Press ALBUM PRESET or gt i on the remote control once or more to select the preset number where programming should start Helpful hints If no tuner preset number is selected default is preset 1 and all your presets will be erased 2 Press PROG for 4 seconds or more to activate auto store programming gt Display AUTO is shown and available stations are programmed in order of waveband FM followed by MW the first preset station will then be played after all stations are stored automatically Manual programming 1 Tune to your desired station see Tuning to stations 2 Press PROG to activate programming Display PROG flashes 3 Press ALBUM PRESET i or gt i on the remote control once or more to allocate a number from 1 to 20 for FM or 1 to 10 for MW 4 Press PROG again to confirm Display shows the preset number waveband and the frequency of the preset station 5 Repeat the above four steps to store other stations Helpful hints You can erase a preset station by storing another frequency in its place To listen to a preset station Press ALBUM PRESET 4 or gt on the remote control once or more until the desired preset station is displayed CAUTION Use of controls or adjustments or performance of p
21. r 21 22 Ss Power Supply Karaoke General Operation as Maintenance a L Digita Mure asses Troubleshooting k a E gt Su Fran ca is Information G n rale sur les MP3 25 CD VCD MP3 CD EON ENE E 33 39 Commander 26 27 Enregistreur de Cassett 40 41 5 Alimentat one DAK Kar A Ecce rara 41 Utilisation Generale 29 30 Entretien et S curit lTE 42 Tuner Num rique 31 32 Depistage des Anomalies 43 p p Informaci n General MP3 44 CD YAVCIDYM IP SHO mS 52 58 E S p ano l CONIrOES 2220 2 eee 45 46 Pletina Grabadora 59 60 E Fuente de Alimentacion A ETE Oker PO e T 60 Funcionamiento General 48 49 Mantenimiento y Seguridad 61 a Sintonizador Digital 50 51 Problemas Y Soluciones 62 h Z MES LE EN 2 WIN IOLA cts nn UA a SU Gee cd MP3 General Information ysij6uq Dear Customer Thank you for buying the Philips MP3 CD Soundmachine Your great new acquisition will allow you to listen to up to 10 hours of CD like quality music using the revolutionary new music compression technology MP3 MP3 technology MP3 is short for MPEG1 Layer 3 encoding and decoding technology a very powerful encoding algorithm with which you can shrink down the orginal digital audio sound data with a factor of up to 10 without losing signifi
22. res Por fen menos naturales tales como temblores inundaciones incendios descargas el ctricas rayos etc o delitos causados por terceros choques asaltos ri as etc HEAVY HEAVY Take care of your CD Soundmachine Take care of your CD Soundmachine Grip both handles when you carry or Grip both handles when you carry or lift the set lift the set LOURD HEAVY Soin de prise de votre Soundmachine Take care of your CD Soundmachine CD Saisissez les deux poign es quand Grip both handles when you carry or vous portez ou d placez l appareil lift the set SG 080 Optimum disc playability ensuring excellent picture quality Philips components and modules for the various CD applications have always enjoyed an excellent reputation in the market place for super disc playability the ability to play discs which may be scratched soiled or not fully according to the standard specification This position has been underlined by tests showing the superior performance of the various Philips players as well as by the positive experiences of millions of individual consumers around the world Constantly improving performance As the penetration of the CD system has increased and new applications like CD ROM and Video CD have become commonplace Philips Components as the CD technology inventor and as one of the major supplie
23. rocedures other than herein may result in hazardous radiation exposure or other unsafe operation Environmental information All unnecessary packaging material has been omitted We have done our utmost to make the packaging easily separable into three mono materials cardboard polystyrene and plastic Your set consists of materials which can be recycled if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment 13 English CD VCD MP3 CD ys 1 6uy DISCS FOR PLAYBACK This set can play all digital audio CD video CD finalised digital audio CD Recordable CDR discs and finalised digital audio CD COMPACT atra Rewritable CDRW discs DIGITAL AUDIO DIGITAL AUDIO H Recordabl Support following MP3 CD formats e ISO 9660 or ISO 9660 Joliet format Max 30 characters COMPACT COMPACT e Max Track number is 400 dis ose e Max nested directory is 8 levels o Se e The max album number is 99 ReWritable GTA VIDEO e The max MP3 programme track number is 20 e The max length of each track is 99 minutes 59 seconds e The player can play mixed mode disc of CD MP3 CD e Supported VBR bit rate e Supported sampling frequencies for MP3 disc 8 kHz to 48 kHz 44 1kHz preferably e Supported bit rates of MP3 disc are 32 320 kbps 128 kbps preferably Following formats are not suppor
24. rs of CD player modules in the industry has constantly improved the performance of its products One of the ways in which this benefits users is by optimum disc playability This is an important parameter for CD players other than CD Audio and especially for the Video CD applications because any loss of data from the disc will at best cause disturbances in the reproduced picture and at worst can cause the player to lose track so that disc playing fails EriCo Presenting Super Error Correction To ensure consistently good results when playing Video CD discs of all quality grades and conditions Philips has introduced further improvements in the system s playability These developments together are called Super Error Correction a proprietary Philips technology optimizing the system s ability to handle less than perfect discs with the minimum disturbance to normal playing By effectively eliminating virtually all errors arising under normal playing conditions Super Error Correction ensures that the picture quality as seen by the user is independent of disc play The video encoding and processing during mastering of the disc and the MPEG 1 decoding and video encoding in the signal processing stages are now the only limiting factors for picture quality INDEX Eng lish MP3 General Information CACA CONS CO 14 20 Cono Cassette recorde
25. sh TROUBLESHOOTING ysij6uq If a fault occurs first check the points listed below before taking the set for repair If you are unable to remedy a problem by following these hints consult your dealer or service centre WARNIN G Do not open the set as there is a risk of electric shock Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee Problem Solution CD VCD OPERATION NO DISC is displayed Insert a disc No picture on TV screen No colour on TV Check if the disc is inserted upside down Wait until the moisture condensation at the lens has cleared Replace or clean the disc see Maintenance Use a readable disc or correct recorded format MP3 CD Connect the cable between the system and TV Change the system to the respective PAL or NTSC setting RADIO RECEPTION Radio reception is poor If the signal is too weak adjust the antenna for better reception Increase the distance between the Receiver and your TV or VCR TAPE OPERATION RECORDING Recording or playback cannot be made Clean deck parts see Maintenance Use only NORMAL IEC I tape Apply a piece of adhesive tape over the missing tab space GENERAL The system does not react when buttons pressed set does not work no display on LCD Sound cannot be heard or is of poor quality The remote control does not function properly 24 Switch off the set Remove and reconnect the
26. ted e The files like WMA AAC DLF M3U PLS MP3 PRO e The non session closed discs PLAYING A DISC 1 Press STANDBY ON once or more to on then select CD e VCD SOURCE 2 Press OPENeCLOSE to open the CD door DPEN is displayed when the CD door is open 3 Insert a CD with the printed side facing up and press down on OPENeCLOSE to close the CD door Display show REAJ then 001 track number and elapsed time gt NO JISC will be displayed if no disc is inserted or error in CD operation 4 Playback starts from the beginning of the 1st track automatically For MP3 CD only The current track number X xx and current album number AX xX will be displayed interchangeably On TV screen the album list appears on the left and track list on the right max 10 lines per page The current selected music is highlighted with the elapsed time shown at the upper right corner Helpful hints To ensure good system performance wait until the disc completely reads before proceeding For MP3 CD the disc reading time may exceed 1 minute due to the large number of songs compiled into one disc CD VCD MP3 CD e Press PI to start playback if in the stop position The current track number and elpased time appear on the display e To interrupt playback press PH The current track number will start flashing e To resume playback press PII again e To stop playback press
27. to stations you can tune to your stations manually or by automatic search tuning Press down on 4 or i lt lt or gt gt on the remote control and release button when the frequency in the display starts running The radio automatically tunes to a station of sufficient reception Display shows SEARCH during automatic tuning 3 Repeat step 2 if necessary until you find the desired station e To tune to a weak station press e lt or i lt lt or gt gt on the remote control briefly and repeatedly until you have found optimal reception Changing tuning grid some versions only In North and South America the frequency step between adjacent channels in the AM and FM band are 10 KHz and 100 KHz respectively In the rest of the world this step is 9 KHz and 50 KHz Usually the frequency step has been preset in the factory for your area if not 1 Select TUNER source 2 Press MODE on the set for at least 6 seconds gt The display shows either G 9 or G ig Helpful hints All preset stations will be lost and need to be reprogrammed To improve radio reception e For FM extend incline and turn the telescopic antenna Reduce its length if the signal is too strong e For MW the set uses a built in antenna Direct this antenna by turning the whole set DIGITAL TUNER Programming tuner stations You can store up to a total of 30 radio stations in the memory 20 FM and 10 MW manually
28. ttings tuner presets and the volume level up to a maximum volume level of VOL 20 will be retained in the set s memory ADJUSTING VOLUME AND SOUND 1 Adjust the volume with the VOLUME control English gt Display shows the volume level VEL and a number from 0 32 2 MAX SOUND CD To enhance the bass response press MAX SOUND once or more to W ni 1 switch on off V L 1 MAX SOUND key backlight lights up when MAX SOUND is turned on Helpful hints MAX SOUND can be used when you play CD VCD FM MW and TAPE source Some discs might be recorded in high modulation which causes a distortion at high volume If this occurs deactivate MAX SOUND or reduce the volume 3 EQUALIZER To adjust the bass mid and high frequencies press EQUALIZER once or more or press EQ on the remote control then rotate VOLUME within 3 seconds to adjust each level Display briefly shows FASS MID or HIGH level 5 to 5 or VOL Helpful hints EQUALIZER can be used during CD VCD FM MW and TAPE source To prevent sound interference the bass control options operate exclusively You cannot combine the bass from EQUALIZER with MAX SOUND 11 DIGITAL TUNER ysij6uq RADIO RECEPTION Tuning to stations 1 Press STANDBY ON to on then press SOURCE once or more to select FM MW Display shows waveband frequency and preset station number if already stored 2 Tuning
Download Pdf Manuals
Related Search